06 Distance Based Adjacency Creation OPT 3.0
Transcript of 06 Distance Based Adjacency Creation OPT 3.0
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
1/34
1 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
NetAct Optimizer 3.0 Basic
Distance-based Adjacency Creation
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
2/34
2 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Nokia Siemens Networks
AcademyLegal notice
Intellectual Property RightsAll copyrights and intellectual property rights for Nokia Siemens Networks trainingdocumentation, product documentation and slide presentation material, all of which are forthwithknown as Nokia Siemens Networks training material, are the exclusive property of NokiaSiemens Networks. Nokia Siemens Networks owns the rights to copying, modification,translation, adaptation or derivatives including any improvements or developments. NokiaSiemens Networks has the sole right to copy, distribute, amend, modify, develop, license,sublicense, sell, transfer and assign the Nokia Siemens Networks training material. Individuals
can use the Nokia Siemens Networks training material for their own personal self-developmentonly, those same individuals cannot subsequently pass on that same Intellectual Property toothers without the prior written agreement of Nokia Siemens Networks. The Nokia SiemensNetworks training material cannot be used outside of an agreed Nokia Siemens Networkstraining session for development of groups without the prior written agreement of NokiaSiemens Networks.
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
3/34
3 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
At the end of this module the trainee should be able to:
Use predefined rules to fill missing adjacencies and fix
constraints
Run distance-based adjacency generation with Optimizer
Check adjacency optimization results
Module Objectives
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
4/34
4 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Distance-based Adjacency Creation
How to fill missing bidirectional and same site adjacencies?
How to take the nearest cells as neighbor cells?
How to view and modify adjacencies in the Browser?
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
5/34
5 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Prerequisites
Invalid adjacencies have been fixed
Antennas defined for every cell
Forbidden Constraints have been createdAdjacency templates have been created for each object type
Template assignment rules have been created
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
6/34
6 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Adjacency Constraints
mandatory constraint
forbidden constraint
Constraints are global in the actuals
Remember to delete unnecessary constraints
Constraint creation: - manually
- importing from a CSV file
List All Adjacency Constraints to Browser:
Tools->Adjacency optimization
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
7/34
7 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Starting the Tool
Creation based on distance and antenna direction
Available also for WCDMA cells and planned cellsSelect target objects from the Navigator or from Map
and use popup menuUse the Toolsmenu to start the optimization for the activescope
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
8/34
8 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Starting Adjacency optimization (1/2)
Target objects:
GSM cells
WCDMA cells
planned cellsSelection of target objects:
an existing scope
an active scope
from the Navigator
from the Browser or
from Map
Start Adjacency optimization
from the popup menu or
from Tools
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
9/34
9 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Starting Adjacency optimization (2/2)
Select the adjacency types to be loaded
For bidirectional optimization both ADJW and ADJG are requiredif inter-system adjacencies are needed
With multiple 3G carriers ADJI can be selectedSelect only ADCE if the target is GSM only
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
10/34
10 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Adjacency optimization Tool
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
11/34
11 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Rules
Optimizer rules can be used to fill missing bidirectional andsame site adjacencies and mandatory constraints
Mandatory constraint should always have an
adjacencyForbidden constraint should NOT have an adjacency
Same site cells should always have mutualadjacencies
All adjacencies should be bidirectional
One rule is used to delete existing adjacencies with forbiddenconstraint
Resulting correction plan can be used also for distance-basedcreation
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
12/34
12 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Selecting Rules
Use bidirectional optimization option in Common tool view mustbe selected to use Create bidirectionality rule
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
13/34
13 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Distance-based Adjacency Creation
How to fill missing bidirectional and same site adjacencies?
How to take the nearest cells as neighbor cells?
How to view and modify adjacencies in the Browser?
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
14/34
14 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Common Parameters
Create bidirectionalityis recommended
Both ADJW and ADJG types
need to be in the scope for thisChanges should be enabledbetween the scope and bufferarea
Minimum and maximumadjacency list lengths canbe modified
In GSM optimization the user can
define band-specific list length
limitations
Go to Creationparameters
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
15/34
15 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Creation Parameters
Open parameters For All Adjacency Typesand select options
Enable creation for each adjacency type separately
Initial selection of types limits the available choices here
Adjacency type specific creation parameters
Distance and relative antenna angle
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
16/34
16 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Common Creation Parameters
Options related to types that are not loaded are inactive
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
17/34
17 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Allowed Collisions in Creation
In typical Adjacency optimization plan NO collisions are allowed
Existing collisions prevent creation of the same type adjacenciesfor the cell -> Allow collisions to create new adjacencies
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
18/34
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
19/34
19 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Theta Angle
Angle measurement starts from the line connecting the sites
Measurement always to shortest route
Theta angle: = +
Cell 1
Cell 2
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
20/34
20 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Start Adjacency optimization
Check that nothing is selected in the Deletiontab
Remember also that you may have Rulesselections
Start optimization and check the results in tables
Adjacency optimization algorithm is very fast
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
21/34
21 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Results Summary
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
22/34
22 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Detailed Results on Created Adjacencies
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
23/34
23 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Creation Priority
Adjacencies to be created or deleted are in the order ofimportance based on the distance and theta angle
Distance and theta anglecan be adjusted for the next
round of optimizationManually created adjacenciesin the same plan are includedin this list
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
24/34
24 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Saving Results
Save your results to a planData is saved to the plan that was originally open when the Adjacencyoptimization tool was started
If no plan was open in Adjacency optimization startup (Actual Context) thena new plan must be created by pressing the Save button
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
25/34
25 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Distance-based Creation Workflow
Select optimization Strategyoptions in Commontool viewCheck the minimum and maximum list lengths in Commontool viewCheck the Create New Adjacenciescheckbox in Creationtool viewSelect options For All Adjacency Types
Check the adjacency types and their options in Creationtool viewSelect only one plan based on distanceAdjust Maximum Distanceand Maximum Theta Anglefor all typesCheck that Delete Adjacenciesis not checked in Deletiontool view
Run Adjacency optimization Algorithm
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
26/34
26 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Exercise
Choose optimization scope and start adjacency optimization
Check common parameters
Select Creation parameters for all and selected typesRun distance based creation for your scope
Check the results in Adjacency Browser and run again ifneeded
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
27/34
27 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Distance-based Adjacency Creation
How to fill missing bidirectional and same site adjacencies?
How to take the nearest cells as neighbor cells?
How to view and modify adjacencies in the Browser?
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
28/34
28 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
List Selected to Browser
After saving to plan selected adjacencies can be locatedon the map or listed to the Browser
Text results can be copied and pasted to other tools
Use Ctrl-A to select all
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
29/34
29 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Changing Template 1
In Browser the adjacency template can be changed
Parameter values changed automatically
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
30/34
30 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Changing Template 2
Templates can becreated and modified inCM Editor
New templates becomevisible in Optimizer afterRefresh action inOptions->Template
Assignment Rules
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
31/34
31 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Adjacencies in the Browser
After the optimization you can use File->List Planned ElementsCreated adjacencies can be removed from plan
Deleted adjacencies can be undeleted
From the Map you can also list cells to the Browser and usespecial profile to handle the adjacencies
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
32/34
32 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Exercise
Choose optimization scope and start adjacency optimization
Check common parameters
Run distance-based creation for your scopeList created adjacencies to the Browser and check parameters
Check and change template to all created adjacencies
List a cell to the Browser and create a profile that allows you tosee different types of incoming and outgoing adjacencies
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
33/34
33 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Summary
Distance-based adjacency creation can be used
to correct conflicting or missing adjacency definitions
for mass creation of WCDMA adjacencies
Summary workflow for the distance-based adjacencyoptimization
Save the results into the plan and continue results verification
the Browser and Map
-
7/28/2019 06 Distance Based Adjacency Creation OPT 3.0
34/34
34 Nokia Siemens Networ ks Presentation / PLe /23.8.2010
For public use IPR applies
Document change history
First version for Optimizer 3.0PLe1.023.8.2010
Change commentNameVersionDate