You Will Need: DIY Pinhole Viewer - WRAL-TV Pinhole Viewer Instructions: 1. Cut a one-inch hole in...

Post on 13-Mar-2018

217 views 2 download

Transcript of You Will Need: DIY Pinhole Viewer - WRAL-TV Pinhole Viewer Instructions: 1. Cut a one-inch hole in...

DIY Pinhole Viewer Instructions:1. Cut a one-inch hole in the middle of one

piece of cardstock.2. Tape a piece of smooth aluminum foil over

the hole. 3. Using the thumbtack, make a pinhole in

the middle of the foil.

View the Eclipse:Safety warning: never look directly at the sun (even through a small hole)!

1. Place the second piece of cardstock on the ground infront of you as a projection screen.

2. Stand with the sun behind you and hold the pinhole cardstock out in front of you so the sunlight streams through your pinhole and onto your screen.

3. What happens to the projection on the screen when you move the pinhole cardstock closer to it? Whatabout further away?

You Will Need:Two pieces of white cardstockAluminum foilThumbtackTape