WATERBORNE HIGH PERFORMANCE VARNISH · staircases, dining rooms, lounges, and other similar rooms....

Post on 06-Oct-2020

0 views 0 download

Transcript of WATERBORNE HIGH PERFORMANCE VARNISH · staircases, dining rooms, lounges, and other similar rooms....

The

info

rmat

ion

set

out

cons

are

pur

ely

illus

trat

ive

and

are

not

the

resp

onsi

bilit

y of

the

man

ufac

ture

r, th

e ap

plic

atio

n of

pro

duct

s no

t m

ade

unde

r hi

s su

perv

isio

n.

IntERIOR PROFESSIONAL

Product description VEGAFLOOR® belongs to the new generation of environmentally friendly, water-based products. Quick drying and odourless, it is a single pack waterborne polyurethane resin finish that offers excellent resistance to both mechanical and chemical abrasion. Giving long lasting protection to all wooden flooring subject to normal to heavy traffic use it is ideal for staircases, dining rooms, lounges, and other similar rooms. Being water resistant, VEGAFLOOR® is the perfect solution for areas of high water content such as bathrooms and kitchens. Beautifying and maintaining the woods natural appearance, VEGAFLOOR® can be applied to all types of wood including exotic hardwoods.

Properties • Polyurethaneresinvarnish.Non-slip.• Protectsandenhancesthenaturalbeautyofthewood.• Maintainsthewoodsnaturalcolour.• Easytouse.Quickdrying.• Excellentmechanicalandchemicalresistance,includingammoniabasedproducts.• Colourless-Odourless.• Non-yellowingandresistanttolight.• Protectsandenhancesstaircases,parquetflooring,veneeredflooring...• MaybetintedwithPRIMAFLOOR®*orauniversalcolourant(max5%). Always test tinted product on a small area first to determine final colour and result.• Maybeappliedoverpreviouslysolventorwaterbornevarnishedsurfaces.

Basic uses • Allwoodenfloors,newandoldincludingparquetflooring,veneered(engineered)flooringandstaircases.• Allsoftandhardwoodsincludingexotichardwoods.• Idealfor: - Normal traffic: bedrooms, lounges, bathrooms... - Heavy traffic: corridors, stairs, dining rooms, kitchen...

Technical data Finish: Matt,SatinorGloss.Vehicle Type: Acrylic polyurethane resin.Solvent Type: Water.Viscosity: Fluid.Specific Gravity (at 20°C): 1.04±0.05.Physical State:Liquid.Solid Content: 39%±2.pH: 8.5±0.5.Flash point: Non-flammable.Resistance to wear (Taber Abraser): Dryfilmloss=24.3mg.Sensitivity to domestic products: Good.Shelf Life: 1 year in its original unopened container.Container Size: 1L,2.5L,5L,10L.Colour: Colourless.Drying (data at + 20°C and 50 % relative humidity):• Dustdry:2hours. • Normaluse:24hours.• Touchdry:3-4hours. • Intensiveuse:2weeks.• Sandable:4hours. • Finalhardness:2weeks.• Re-coat:4-12hours.Note: Where the DuRCISSEuRuFL*hardener is added to VEGAFLOOR® then drying times should be extended by 1 hour.VOC: Eulimitvalueforthisproduct(cat.A/g):140g/l(2010).Thisproductcontainsmax50g/lVOC.

Application tools Highqualitysyntheticbrush.10mm(3/8inch)Mediumpilesyntheticroller(PolyamideorPolyester).A high speed paint stirrer should be used for mixing, when DuRCISSEuRuFL*hardener is added to VEGAFLOOR®.

Good application practice

• Protecteverythingthatdoesnothavetobecoated.• Removeallfurnitureandfurnishings.• Removeplantsandflowers.Removeorcoverfishtanks.• CompatiblewithwoodthathaspreviouslybeentreatedwithTMu84*.• Mixcarefullybeforeapplication.Do not shake.• useasis.Donotdilute.• Donotapplyatanambientairandwoodtemperatureoflessthan10°Corgreaterthan25°C(min15°CifDuRCISSEuR

uFL*hardenerisadded).• OnlyapplyVEGAFLOOR®towoodsurfaceswhosemoisturecontentis15%orless.• Neversandprimedorstainedwoodpriortoapplyingfinishingcoat.• Inallcases,complywiththeapplicablestandards.• ToavoidproductdryingtofastdonotopenwindowsduringapplicationofVEGAFLOOR®.Note:Ifproductisshaken,allowtostandfor2hoursbeforeusing.

WATERBORNE HIGH PERFORMANCE VARNISH

VEGAFLOOR®

The

info

rmat

ion

set

out

cons

are

pur

ely

illus

trat

ive

and

are

not

the

resp

onsi

bilit

y of

the

man

ufac

ture

r, th

e ap

plic

atio

n of

pro

duct

s no

t m

ade

unde

r hi

s su

perv

isio

n.

OwatROl IntERnatIOnal SlUBarcelona - Spain

Find all our solutions:

www.owatrol.pro

Surface preparation General directions:Surfacesmustbedry,clean,freeofdirt,greaseandothersurfacecontaminationincludingpreviouscoatings.VEGAFLOOR® can only be applied to bare wood surfaces or wood surfaces previously finished with VEGAFLOOR® or a solvent orwaterbornefloorvarnishingoodcondition.ALLotherfinishesMuSTbecompletelyandthoroughlyremoved.Alwayscleanmeticulouslywithavacuumcleaneraftereachsanding,includinganydusttraps(skirting,radiators,pipes,windowsills,etc).Sandwoodenfloorusingappropriatesystemandabrasivegrades,dependingonconditionofsurfaceandwoodspecies.Cracksof2mmwideorlessshouldbefilledwithLIANFLOOR®*andsandingresumedwith80or100gritpaperdependingon the last grit used.FinishwithfinishinggradeuptogritNo.120or150dependingonthewoodspeciesandthicknessofwearlayer.IfrequiredtreatneworoldbarewoodwithTMu84*toprotectagainstfungalattackandbluestain.PrimeallbarewoodsurfaceswithPRIMAFLOOR®*.

Sandinggrades(changeonlyonesandinggradeatatime):

New wood surfaces:Degrease surface with denatured alcohol, acetone or similar solvent based product.Prepareandsandsurfaceasinstructedin“Generaldirections”above.Previously treated surfaces (oiled or polished):PreviouslyoiledorpolishedsurfacesshouldbedrystrippedwithCDKP®90*.Afterstrippingdegreasesurfacewithwithdenaturedalcohol,acetone,white(mineral)spiritorsimilarsolventbasedproduct.Prepareandsandsurfaceasinstructedin“Generaldirections”above.Previously varnished surfaces in good condition:CleanfloormeticulouslywithSPACENETT®*.Repeatprocedureifrequired.SandsurfacewithgritNo100or120toremovesurfaceimperfectionsanddullexistingfinish.Meticulouslyvacuumsurface.Previously treated surfaces in poor condition:RemoveexistingfinishbysandingorstrippingwithCDKP®90*.Afterstrippingdegreasesurfacewithwithdenaturedalcohol,acetone,white(mineral)spiritorsimilarsolventbasedproduct.Prepareandsandsurfaceasinstructedin“Generaldirections”above.

Application • Facingthelightandstartingoppositethedoorsoastoworktowardsit,applyafirstevenandgenerouscoatofVEGAFLOOR®. Always maintain a wet edge to avoid overlaps.

• Startwithabrushattheedges,thendotheremainingsurfacewitharoller,workinginareasof2mby2m.• Do3criss-crosspassesinoneapplication.• Allowtodryfor4hoursdependingontheambientconditions.• Sandfloor(gritNo.150to180)todullthesurfaceandaidadhesionofthe2ndcoat.• Apply2ndcoatofVEGAFLOOR®.Donotleavemorethan12hoursbetweenapplicationofthe1stand2ndcoat.Tip: To increase VEGAFLOOR®’s performance it may be reinforced with the hardener DuRCISSEuRuFL*. -Add10%DuRCISSEuRuFL*tothe2ndcoatofVEGAFLOOR®. -Carefullymixthetwoproducts,foraminimumof2minutes. -Leavetostandfor5minutes. - Use mixed product within 4 hours.

Recommendations after application

• Waitatleast48hoursbeforereplacinganyfurniture.Protectbaseoffeetwithsoftpads.• DONOTcovervarnishedfloorswithcarpetsorprotectivecoversforaminimumof15daysafterapplicationof

VEGAFLOOR®.

Coverage 6-7 m2/lpercoatActual coverage will vary depending on method of application, texture and porosity of surface.

Cleaning and maintenance

CLeANiNG• Regularlycleanthefloorwithabrushorvacuumcleaner.• Forthefirst15days,VEGAFLOOR®maybecleanedwithSOAPCLEAN*andaverywellwrungoutmop,thereafterclean

withSOAPCLEAN*inthenormalmanner.• DONOTcleanVEGAFLOOR®withSPACENETT®*foratleast15daysafterapplication.MAiNTeNANCeTotal restoration:• CleanfloormeticulouslywithSPACENETT®*.• Sandtheareawithafinegradeabrasive(gritNo150).• Cleanmeticulouslywithavacuumcleaner.• Apply1or2coatsofVEGAFLOOR®asrequired,toprotectandrestorethelookofthefloor.Patch repairs:Depending on the level of wear and tear to the original coating, localised touch-ups are possible.• Cleansurfacethoroughly.• Sandtheareawithafinegradeabrasive(gritNo150).• Cleanmeticulouslywithavacuumcleaner.• ApplyacoatofVEGAFLOOR®blendingintoareaswhichstillhaveagoodfinish.• Forbadlywornareasa2ndapplicationmayberequired;thisshouldbeappliedasdirectedunder“Application”

instructions above.• Areasretainingagoodfinishdonotneedamaintenanceapplication.

Clean-up Water.

Storage Storeawayfromfrostandhightemperatures.

General information Every care is taken to ensure that the information provided in this technical data sheet is accurate. OwATROL international is unable to guarantee results as we have no control over the conditions under which our products are applied. For further advice and information please contact our technical department by email at info@owatrol.com or the local OWATROL Agent for your country. The information above is correct at the date of issue.All other OWATROL products named in this document, should be used as per label instructions and the technical data sheet.

Safety Keepoutofthereachofchildren.Donotbreathevapours.Avoidcontactwithskin.Ifswallowed,donotinducevomiting:seek medical advice immediately and show the container or label. MSDS available at www.owatrol.pro

issue Date February2012.

*Samemanufacturer 03/1

2 - R

CS

Tou

rs 3

31 9

98 4

84

VEGAFLOOR® is a trademark

Coarse grades Medium grades Finishing grades243036 405060 80100120150