Post on 20-Oct-2019
12018.1
The Connector.With fixed insert pipe.
A1made in Germany
--------------------------------------------------
PIPES ARE
NOT ENDLESS.
Installation instructions see page 6/7 3
The Connector - A1With fixed insert pipe for drinking water, water, gas,heating and district heatingOur all-round connector is always the best choice for water, gas, heating and district heating lines. The connectors are made of lead-free brass (according to drinking water regulations) and thus are ideal for the use in drinking water systems.
Dimensions:• for PE-pipes Ø 16 mm to Ø 75 mm
Applications:• Cold and hot water up to 95 °C• Gas up to 4 bar• Heating/ district heating• Water with glycol
Kind of pipes:• PE 80, PE 100• PE-Xa, PE-Xc• PE-RC• PE-RT• PP
Approval: • ISO 17885 DN 16 - DN 50 Cold water• DVGW GW335-B4 DN 16 - DN 50 Cold water• SVGW ZW157 01/17,
GW/TPG-TW 101 (10/04) following DIN 8076 (2013) DN 16 - DN 50 Cold water
• DVGW W534 DN 12 - DN 40 Hot water• DVGW G5600-1 DN 25 - DN 50 Gas• ACS /13 ACC LY 190 Hygiene water
Nominal pressure:see table on page 5
You can find the latest certificates here: www.beulco.de/Zertifikate
Sealing
MaterialOur connectors are made of thermally unstressed brass and Ecobrass. Ecobrass is a lead-free alloy, qualified for the use in drinking water installations according to the European Drinking Water Directive 98/83/EC. The reliable brass is characterized by dezincification resistance and high durability.
Please note: Our connectors for other applications than drinking water are made of a different alloy (CW602).
The connector consists of only three components, thus it enables a quick and simple installation without any special tool. The fixed insert pipe ensures an optimal form of the PE pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. Even by negative pressure, PE pipes do not deform with our connectors.
No long-term damages due to leaking or porous seals, because the sealing function is given by the in-sert pipe. Thus, no additional seals are needed. The tested and refined clamping mechanism with fixed insert pipe guarantees a long term tight connection. The sealing function does not depend on the qua-lity of the pipe surface, so damages on the pipe surface have no influence on tightness.
BodyClamping ring
Nut
Construction
You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de4
Ø 63 mm and 75 mm
BodyClamping ring
Profile seal ringInsert pipe
Flange
Hexagonal bolt
Ø 90 mm and 110 mm
Body
O-ring
Pressure ring
Clamping ring
Insert pipe Flange
Hexagonal bolt
The Flange Connector - A1With loose insert pipe for drinking water and water.
Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side.
Dimensions:• for PE pipes Ø 63 mm up to Ø 110 mm
Applications:• Drinking water• Cold and warm water up to 40 °C• Water with glycol
Kind of pipes:• PE 80, PE 100• PE-Xa, PE-Xc• PE-RC• PE-RT
Nominal pressure:see table on page 5
Material
Construction
Sealing
The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security.
Our connectors are made of thermally unstressed brass and Ecobrass. Ecobrass is a lead-free alloy, qua-lified for the use in drinking water areas according to the European Drinking Water Directive 98/83 EC. The reliable brass is characterized by dezincification resistance and high durability.
Depending on the dimension, the sealing function is guaranteed by a profile seal ring or an o-ring seal.Thus the connector owns a separate sealing and a separate clamping function. These functions are not dpendent on each other, which makes the flange connectors safe.
5
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
permitted operation Type SDR** pressure* of pipe (bar)
The most popular pipe dimensions in an overviewacc. to DIN 8074 (08.99) – flow medium water – safety factor 1.25acc. to DIN 16893 (09.00) – flow medium water – safety factor 1.5acc. to DIN 8072 (07.72) – PE-LD soft – pipesPE-HD pipes are not standardised (The norm has been taken back)
* by20°Cand50yearsofoperatio
**Ratioofdiameter/wallthickness(standarddimensionratio)
outer diameter x wall thickness (mm)
10 12 16 20 25 32 40 50 63 75 90 110
6
PE-LD (soft) - - 2 2,2 2,7 3,5 4,3 5,4 6,8 8,1 9,7 11,8
PE-HD (hard) - - - 1,8 1,8 1,9 2,3 2,9 3,6 4,3 5,1 6,3
PE-LD (soft) 2,0 2,0 2,7 3,4 4,2 5,4 6,7 8,4 10,5 12,5 15 18,4
PE-HD (hard) - - 1,8 1,9 2,3 3 3,7 4,6 5,8 6,9 8,2 10
10
PE 63 11 - - - 1,9 2,3 2,9 3,7 4,6 5,8 6,8 8,2 10
PE 80 13,6 - - - 1,8 1,9 2,4 3,0 3,7 4,7 5,6 6,7 8,1
PE 100 17 - - - - 1,8 1,9 2,4 3,0 3,8 4,5 5,4 6,6
PE-X 13,6 1,3 1,3 1,3 1,5 1,9 2,4 3,0 3,7 4,7 5,6 6,7 8,1
12,4 PE 63 9 - - 1,8 2,3 2,8 3,6 4,5 5,6 7,1 8,4 10,1 12,3
PE 80 11 - - - 1,9 2,3 2,9 3,7 4,6 5,8 6,8 8,2 10
12,5 PE 100 13,6 - - - 1,8 1,9 2,4 3,0 3,7 4,7 5,6 6,7 8,1
PE-X 11 1,3 1,3 1,5 1,9 2,3 2,9 3,7 4,6 5,8 6,8 8,2 10
15,9 PE 63 7,4 - 1,8 2,2 2,8 3,5 4,4 5,5 6,9 8,6 10,3 12,3 15,1
PE-HD (hard) 1,8 1,8 2,3 2,8 3,5 4,5 5,6 6,9 8,7 10,4 12,5 15,2
16
PE 80 9 - - 1,8 2,3 2,8 3,6 4,5 5,6 7,1 8,4 10,1 12,3
PE 100 11 - - - 1,9 2,3 2,9 3,7 4,6 5,8 6,8 8,2 10
PE-X 9 1,3 1,4 1,8 2,3 2,8 3,6 4,5 5,6 7,1 8,4 10,1 12,3
PE 80 7,4 - 1,8 2,2 2,8 3,5 4,4 5,5 6,9 8,6 10,3 12,3 15,1
20 PE 100 9 - - 1,8 2,3 2,8 3,6 4,5 5,6 7,1 8,4 10,1 12,3
PE-X 7,4 1,4 1,7 2,2 2,8 3,5 4,4 5,5 6,9 8,6 10,3 12,3 15,1
25 PE 100 7,4 - 1,8 2,2 2,8 3,5 4,4 5,5 6,9 8,6 10,3 12,3 15,1
6
Installation Instructions for Compression Fittings
Step 1Cut the PE pipe at right angle.
Step 2Push nut and clamping ring onto the pipe.
Step 3Push the pipe onto the cylindrical socket up to the end.
Step 4Tighten the nut firmly.
Note:
• When applied in hot water installations please warm up the connection up to 60° - 80° after assembly and retighten the nut,
• Pre-heated pipes enable an easier installation,• For thread connections to metal parts the permitted operation pressure is 4 bar in principle,• Corrosion protection acc. to DIN 50929 is necessary on site in the field of buried pipelining.
7
Flange connector (90 mm and 110 mm)
Installation Instructions for Flange Connectors
Step 1Cut the pipe at a right angle.
Step 2Chamfer the pipe (the outer pipe surface has to be clean and free of grooves).
Step 3Push flange and clamping ring onto the pipe (same sequence as shown in the picture).
Step 4Knock in insert pipe completely.
Step 5Push the pipe into the fitting body up to the end.
Step 6Connect flange and body positively while tightening the screws equally so that tilting is avoided.
Flange connector (63 mm and 75 mm)
Step 1Cut the pipe at a right angle (the outer pipe surface has to be clean and free of grooves).
Step 2Push the parts onto the pipe in the same sequence as shown in the picture.
Step 3Knock in the insert pipe completely.
Step 4Push the pipe into the body up to the end.
Step 5Take the parts to the body
Step 6Mount the flange firmly while tigh-tening the screws so that tilting is avoided
8
Overview compression fittings with fixed insert pipe
Image Description Page Image Description Page
Connector male thread Model 6601
l l l l
10/11
Elbow 90° male threadModel 6630
l l l l
19
Connector male thread, reducedModel 66011
l l l l
12
Elbow 90° female threadModel 66310
l l l l
20
Connector male thread, increasedModel 66012
l l l l
13
Elbow 90° male thread, reducedModel 66300
l l l l
20
Connectorfemale threadModel 6110
l l l l
14
Elbow 90° male thread, increasedModel 66302
l l l l
21
Connectorfemale thread, reducedModel 66111
l l l l
15
Elbow coupling 90°Model 66301
l l l l
22
Connector female thread, increased Model 66112
l l l l
16
T-piece3 x PE connectionModel 6618
l l l l
23
Connector with welded socketModel 6701
l l
16
T-piece3 x PE connection 1 x reducedModel 6619
l l l
24
CouplingModel 6605
l l l l
17
T-piece2 x PE connection 1 x male threadModel 66180
l l l
24
CouplingreducedModel 66050
l l l
18
T-piece2 x PE connection 1 x female thread reducedModel 66181
l l l
25
9
Image Description Page Image Description Page
Connector - flangemale threadModel 6601F
l l
11
Elbow 90°- flangemale threadModel 6630F
l l
20
Connector - flangemale thread, reducedModel 66011F
l l
12
Elbow 90°- flangemale thread, reducedModel 66300F
l l
21
Connector - flangemale thread, increasedModel 66012F
l l
13
Elbow coupling 90°-flangeModel 66301F
l l
22
Connector - flangefemale threadModel 66110F
l l
15
T-piece - flange3 x PE connectionModel 6618Fl l
23
Coupling - flangeModel 6605F
l l
18
T-piece - flange2 x PE connection 1 x female thread, reducedModel 66181Fl l
25
Accessories
Forcing nutModel 6690
26
Profile seal ring for flange connectorsModel 8893
l l
27
Clamping ringModel 6691
26
O-ring sealfor flange connectorsModel P66
l l
27
Overview flange connectors with loose insert pipe
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/ District Heating
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
10 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, MALE THREAD Model 6601
with plastic pipe connection and male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-16 x 2 3/8“ l l l 10 10002616 x 2 3/8“ l l 10 36246216 x 2,2 3/8“ 7,4 l l l 10 10003317 x 2 1/2“ l l l 20 10006417 x 2 1/2“ l l 20 36185417 x 2,2 1/2“ l l l 10 10007117 x 2,2 1/2“ l l 10 36186118 x 2 1/2“ l l l 20 10008818 x 2 1/2“ l l 20 36187818 x 2,5 1/2“ l l l 10 10009518 x 2,5 1/2“ l l 10 36188520 x 1,9/2 1/2“ 11 l l l 20 10010120 x 2,2 1/2“ l l l 20 10011820 x 2,2 1/2“ l l 20 36193920 x 2,8 1/2“ 7,4 l l l 10 10013220 x 3,4 1/2“ 6 l l l 10 10014920 x 3,4 1/2“ 6 l l 10 36190822 x 3 3/4“ l l l 10 18630322 x 3 3/4“ l l 10 36289925 x 2 3/4“ l l l 10 10015625 x 2 3/4“ l l 10 36191525 x 2,3 3/4“ 11 l l l 20 10016325 x 2,3 3/4“ 11 l l 20 36192225 x 2,7 3/4“ l l l 20 10017025 x 2,7 3/4“ l l 20 36189225 x 3,5 3/4“ 7,4 l l l 20 10018725 x 4,2 3/4“ 6 l l l 10 10019428 x 4 1“ l l l 10 18637232 x 2,9/3 1“ 11 l l l l 10 10021732 x 2,9/3 1“ 11 l l l 10 36195332 x 3,5 1“ l l l 10 10023132 x 4,4 1“ 7,4 l l l 10 10024832 x 4,6 1“ l l l 5 10025532 x 5,4 1“ 6 l l l 5 10026236 x 4 1 1/4“ l l 1 362868
40 x 3,6/3,7 1 1/4“ 11 l l l l 5 10029340 x 3,6/3,7 1 1/4“ 11 l l l 5 36196040 x 4,3 1 1/4“ l l l 5 10030940 x 5,5 1 1/4“ 7,4 l l l 5 10031640 x 5,7/5,8 1 1/4“ l l l 5 100330...
11
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, MALE THREAD Model 6601
with plastic pipe connection and male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-...50 x 4,5/4,6 1 1/2“ 11 l l l l 5 10037850 x 4,5/4,6 1 1/2“ 11 l l l 5 36197750 x 5,4 1 1/2“ l l l 5 10038550 x 6,9 1 1/2“ 7,4 l l l 5 10039250 x 8,4 1 1/2“ 6 l l l 5 10042263 x 5,7/5,8 2“ 11 l l l 2 10045363 x 5,7/5,8 2“ 11 l l 2 36199163 x 6,8 2“ l l 2 10046063 x 8,7 2“ 7,4 l l 2 10047775 x 6,8/6,9 2 1/2“ 11 l l 2 10052175 x 6,8/6,9 2 1/2“ 11 l 2 362011
CONNECTOR, MALE THREAD - FLANGE Model 6601F
flange connector with plastic pipe connection and male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 3,6 2“ 17,6 l l 1 30241363 x 5,7/5,8 2“ 11 l l 1 30242063 x 6,8 2“ l l 1 30243763 x 8,7 2“ 7,4 l l 1 30244475 x 6,8/6,9 2 1/2“ 11 l l 1 30247575 x 8,1 2 1/2“ l l 1 30248275 x 10,4 2 1/2“ l l 1 30249975 x 12,5 2 1/2“ 6 l l 1 30250590 x 4,3 3“ 21 l l 1 10057690 x 5,1 3“ 17,6 l l 1 10058390 x 8,1/8,2 3“ 11 l l 1 10060690 x 8,1/8,2 3“ 11 l 1 362028
110 x 6,3 4“ (3 1/2“ female) 17,6 l l 1 100675110 x 10 4“ (3 1/2“ female) 11 l l 1 100682110 x 10 4“ (3 1/2“ female) 11 l 1 362042
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
12 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, REDUCED MALE THREAD Model 66011
with plastic pipe connection and reduced male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-25 x 2,3 1/2“ 11 l l l 5 10092725 x 2,7 1/2“ l l l 5 10093425 x 2,7 1/2“ l l 5 36210325 x 3,5 1/2“ 7,4 l l l 5 10094128 x 4 3/4“ l l l 5 18638928 x 4 3/4“ l l 5 36292932 x 2,9/3 3/4“ 11 l l l l 5 10097232 x 4,4 3/4“ 7,4 l l l 5 10100940 x 2,3 1“ 17,6 l l l 5 10103040 x 3,6/3,7 1“ 11 l l l l 5 10105440 x 4,3 1“ l l l 5 10106150 x 4,5/4,6 1 1/4“ 11 l l l l 5 10113963 x 5,7/5,8 1 1/2“ 11 l l l 2 101214
CONNECTOR, REDUCED MALE THREAD - FLANGE Model 66011F
flange connector with plastic pipe connection and reduced male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 5,7/5,8 1 1/2“ 11 l l 1 30252963 x 8,7 1 1/2“ l l 1 30254375 x 4,3 2“ 17,6 l l 1 30256775 x 6,8/6,9 2“ 11 l l 1 30257475 x 12,5 2“ 6 l l 1 30260490 x 8,1/8,2 2 1/2“ 11 l l 1 101368
110 x 10 3“ 11 l l 1 101443
13
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, INCREASED MALE THREADModel 66012
with plastic pipe connection and increased male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-13 x 2 1/2“ l l l 10 10150416 x 2 1/2“ l l l 20 10152816 x 2 1/2“ l l 20 36203516 x 2,2 1/2“ 7,4 l l l 10 10153516 x 2,7 1/2“ 6 l l l 10 10154218 x 2,5 3/4“ l l 10 36209720 x 1,9/2 3/4“ 11 l l l 10 10159720 x 2,2 3/4“ l l l 10 10160320 x 2,5 3/4“ l l l 10 10161020 x 2,8 3/4“ 7,4 l l l 10 10162725 x 2,3 1“ 11 l l l 10 10165825 x 2,3 1“ 11 l l 10 36212725 x 2,7 1“ l l l 10 10166525 x 2,7 1“ l l 10 36253025 x 3,5 1“ 7,4 l l l 10 10167232 x 2,9/3 1 1/4“ 11 l l l l 5 10170232 x 2,9/3 1 1/4“ 11 l l l 5 36214132 x 3.5 1 1/4“ l l l 5 10172632 x 4,4 1 1/4“ 7,4 l l l 5 10173340 x 3,6/3,7 1 1/2“ 11 l l l l 5 10178840 x 3,6/3,7 1 1/2“ 11 l l l 5 36216540 x 4,3 1 1/2“ l l l 5 10179550 x 4,6/4,7 2“ 11 l l l l 5 101863
CONNECTOR, INCREASED MALE THREAD - FLANGE Model 66012F
flange connector with plastic pipe connection and increased male thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 5,7/5,8 2 1/2“ 11 l l 1 30262875 x 4,3 3“ 17,6 l l 1 30266675 x 6,8/6,9 3“ 11 l l 1 302673
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
14 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, FEMALE THREAD Model 66110
with plastic pipe connection and female thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-16 x 2 3/8“ l l l 10 10220416 x 2 3/8“ l l 10 36252317 x 2 1/2“ l l l 10 10223517 x 2 1/2“ l l 10 36218917 x 2,2 1/2“ l l l 10 10224217 x 2,2 1/2“ l l 10 36219618 x 2 1/2“ l l l 10 10225918 x 2 1/2“ l l 10 36220220 x 1,9/2 1/2“ 11 l l l 20 10227320 x 2,2 1/2“ l l l 20 10228020 x 2,8 1/2“ 7,4 l l l 10 10230320 x 3,4 1/2“ 6 l l l 10 10231020 x 3,4 1/2“ 6 l l 10 36221925 x 2,3 3/4“ 11 l l l 20 10233425 x 2,3 3/4“ 11 l l 20 36222625 x 2,7 3/4“ l l l 20 10234125 x 2,7 3/4“ l l 20 36200425 x 3,5 3/4“ 7,4 l l l 10 10235825 x 4,2 3/4“ 6 l l l 10 10236528 x 3 1“ l l 10 36287528 x 4 1“ l l l 10 18639628 x 4 1“ l l 10 362936
32 x 2,9/3 1“ 11 l l l l 10 10238932 x 2,9/3 1“ 11 l l l 10 36223332 x 3,5 1“ l l l 10 10240232 x 4,4 1“ 7,4 l l l 10 10241932 x 4,6 1“ l l l 10 10242632 x 5,4 1“ 6 l l l 10 10243340 x 3,6/3,7 1 1/4“ 11 l l l l 5 10246440 x 3,6/3,7 1 1/4“ 11 l l l 5 36224040 x 4,3 1 1/4“ l l l 5 10247140 x 5,5 1 1/4“ 7,4 l l l 5 10248840 x 5,7/5,8 1 1/4“ l l l 5 10250150 x 4,5/4,6 1 1/2“ 11 l l l l 5 10254950 x 4,5/4,6 1 1/2“ 11 l l l 5 36226450 x 5,4 1 1/2“ l l l 5 10255650 x 6,9 1 1/2“ 7,4 l l l 5 10256363 x 5,7/5,8 2“ 11 l l l 2 10262463 x 5,7/5,8 2“ 11 l l 2 36227163 x 6,8 2“ l l 2 10263175 x 6,8/6,9 2 1/2“ 11 l l 2 10269375 x 6,8/6,9 2 1/2“ 11 l 2 362288
15
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, FEMALE THREAD - FLANGE Model 66110F
flange connector with plastic pipe connection and female thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 3,6 2“ 17,6 l l 1 30271063 x 5,7/5,8 2“ 11 l l 1 30272763 x 6,8 2“ l l 1 30273475 x 6,8/6,9 2 1/2“ 11 l l 1 30277275 x 8,1 2 1/2“ l l 1 30278990 x 5,1 3“ 17,6 l l 1 10275490 x 8,1/8,2 3“ 11 l l 1 10277890 x 9,7 3“ l l 1 102785
110 x 6,3 4“ (3 1/2“ female) 17,6 l l 1 102846110 x 10 4“ (3 1/2“ female) 11 l l 1 102853
CONNECTOR, REDUCED FEMALE THREAD Model 66111
with plastic pipe connection and reduced female thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-25 x 2,3 1/2“ 11 l l l 5 10309632 x 2,9/3 3/4“ 11 l l l l 5 10314032 x 4,4 3/4“ 7,4 l l l 5 10317140 x 3,6/3,7 1“ 11 l l l l 5 10322540 x 4,3 1“ l l l 5 10323250 x 4,5/4,6 1 1/4“ 11 l l l l 5 103300
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
16 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
CONNECTOR, INCREASED FEMALE THREAD Model 66112
with plastic pipe connection and increased female thread
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-13 x 2,5 1/2“ l l l 5 10369014 x 2 1/2“ l l l 5 10370616 x 2 1/2“ l l l 5 10375116 x 2 1/2“ l l 5 36237016 x 2,2 1/2“ 7,4 l l l 5 10376820 x 1,9/2 3/4“ 11 l l l 5 10383620 x 2,8 3/4“ 7,4 l l l 5 10386725 x 2,3 1“ 11 l l l 5 10389825 x 2,3 1“ 11 l l 5 36241725 x 3,5 1“ 7,4 l l l 5 10391132 x 2,9/3 1 1/4“ 11 l l l l 5 10394232 x 3,5 1 1/4“ l l l 5 10396632 x 3,5 1 1/4“ l l 5 36281340 x 3,6/3,7 1 1/2“ 11 l l l l 5 10402450 x 4,5/4,6 2“ 11 l l l l 5 104109
CONNECTOR Model 6701
with plastic pipe connection and welded socket
Item may differ from the picture.
plastic pipe dimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-25 x 2,3 3/4” l l 5 36294328 x 4 3/4” l l 5 36295032 x 2,9/3 1” l l 5 36296740 x 3,6/3,7 1 1/4” l l 2 36297450 x 4,5/4,6 1 1/2” l l 2 36298163 x 5,7/5,8 2” l 2 36299875 x 6,8/6,9 2 1/2” l 2 36215890 x 8,1/8,2 3” l 1 362257110 x 10 4” l 1 362295
17
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
COUPLING Model 6605
with 2 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
12 x 2 6 l l l 10 10439013 x 2,5 l l l 10 10441314 x 2 l l l 10 10442016 x 2 l l l 10 10444416 x 2,2 7,4 l l l 10 10445116 x 2,7 6 l l l 10 10446817 x 2 l l l 10 10448217 x 2,2 l l l 10 10449918 x 2 l l l 10 10450518 x 2,5 l l l 10 10451220 x 1,9/2 11 l l l 10 10452920 x 2,2 l l l 10 10453620 x 3,4 6 l l l 10 10456722 x 3 l l l 10 18633425 x 2 l l l 10 10457425 x 2,3 11 l l l 10 10458125 x 2,3 11 l l 10 36244825 x 2,7 l l l 10 10459825 x 3,5 7,4 l l l 10 10460428 x 4 l l l 5 18640232 x 2,9/3 11 l l l l 5 10463532 x 2,9/3 11 l l l 5 36245532 x 3,5 l l l 5 10465932 x 4,4 7,4 l l l 5 10466632 x 5,4 6 l l l 5 10468040 x 2,3 l l l 5 10469740 x 3,6/3,7 11 l l l l 5 10471040 x 3,6/3,7 11 l l l 5 36247940 x 4,3 l l l 5 10472740 x 5,5 7,4 l l l 5 10473450 x 4,5/4,6 11 l l l l 2 10479650 x 4,5/4,6 11 l l l 2 36248650 x 5,4 l l l 2 10480250 x 6,9 7,4 l l l 2 10481963 x 5,7/5,8 11 l l l 2 10487163 x 5,7/5,8 11 l l 2 36249363 x 6,8 l l 2 10488863 x 8,7 7,4 l l 2 10489575 x 6,8/6,9 11 l l 2 10494975 x 6,8/6,9 11 l 2 362509
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
18 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
COUPLING - FLANGE Model 6605F
flange connector with 2 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
63 x 5,7/5,8 11 l l 1 30302175 x 6,8/6,9 11 l l 1 30307690 x 5,1 17,6 l l 1 10500790 x 8,1/8,2 11 l l 1 10502190 x 8,1/8,2 11 l 1 362424
110 x 10 11 l 1 362318
COUPLING, REDUCEDModel 66050
with 2 equal plastic pipe connections, 1x reduced
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
20 x 1,9/2 - 16 x 2 11 l l l 1 10516825 x 2,3 - 20 x 1,9/2 11 l l l 1 105212
32 x 2,9/3 - 25 x 2,3 11 l l l 1 10526750 x 4,5/4,6 - 40 x 3,6/3,7 11 l l l 1 105427
19
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
ELBOW 90°, MALE THREAD Model 6630
with plastic pipe connection and male thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-16 x 2 3/8“ l l 10 36282017 x 2 1/2“ l l l 10 10663917 x 2 1/2“ l l 10 36260818 x 2,5 1/2“ l l l 10 10666018 x 2,5 1/2“ l l 10 36262220 x 1,9/2 1/2“ 11 l l l 10 10667720 x 1,9/2 1/2“ 11 l l 10 36263920 x 2,2 1/2“ l l l 10 10668420 x 2,8 1/2“ 7,4 l l l 10 106707
25 x 2,3 3/4“ 11 l l l 5 10673825 x 2,3 3/4“ 11 l l 5 36264625 x 2,7 3/4“ l l l 5 10674525 x 3,5 3/4“ 7,4 l l l 5 10675232 x 2,9/3 1“ 11 l l l l 5 10678332 x 2,9/3 1“ 11 l l l 5 36265332 x 3,5 1“ l l l 5 10680632 x 4,4 1“ 7,4 l l l 5 10681340 x 3,6/3,7 1 1/4“ 11 l l l l 5 10686840 x 3,6/3,7 1 1/4“ 11 l l l 5 36267740 x 4,3 1 1/4“ l l l 5 10687540 x 5,5 1 1/4“ 7,4 l l l 5 10688250 x 4,5/4,6 1 1/2“ 11 l l l l 2 10694350 x 4,5/4,6 1 1/2“ 11 l l l 2 36269150 x 5,4 1 1/2“ l l l 2 10695050 x 6,9 1 1/2“ 7,4 l l l 2 10696763 x 5,7/5,8 2“ 11 l l l 2 10702563 x 5,7/5,8 2“ 11 l l 2 36271463 x 6,8 2“ l l 2 10703263 x 8,7 2“ 7,4 l l 2 10704975 x 6,8/6,9 2 1/2“ 11 l 1 362721
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
20 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
ELBOW 90°, MALE THREAD - FLANGE Model 6630F
flange connector with plastic pipe connection and male thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 5,7/5,8 2“ 11 l l 1 30322975 x 4,3 2 1/2“ 17,6 l l 1 30326790 x 8,1/8,2 3“ 11 l l 1 107179
110 x 10 4“ 11 l l 1 107254110 x 10 4“ 11 l 1 362516
ELBOW 90°, FEMALE THREAD Model 66310
with plastic pipe connection and female thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-20 x 1,9/2 1/2“ 11 l l l 5 10887920 x 2,2 1/2“ l l l 5 10888625 x 2,3 3/4“ 11 l l l 5 10893025 x 2,7 3/4“ l l l 5 10894732 x 2,9/3 1“ 11 l l l l 5 10898532 x 3,5 1“ l l l 5 10900540 x 3,6/3,7 1 1/4“ 11 l l l 5 10906740 x 4,3 1 1/4“ l l l 5 10907450 x 4,5/4,6 1 1/2“ 11 l l l l 2 10914263 x 5,7/5,8 2“ 11 l l 2 10922775 x 6,8/6,9 2 1/2“ 11 l l 1 109296
ELBOW 90°, REDUCED MALE THREAD Model 66300
with plastic pipe connection and reduced male thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-32 x 2,9/3 3/4“ 11 l l l 5 10754440 x 3,6/3,7 1“ 11 l l l l 5 10762950 x 4,5/4,6 1 1/4“ 11 l l l 2 107704
21
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
ELBOW 90°, REDUCED MALE THREAD - FLANGE Model 66300F
flange connector with plastic pipe connection and reduced male thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-63 x 5,7/5,8 1 1/2“ 11 l l 1 30342775 x 6,8/6,9 2“ 11 l l 1 30347275 x 10,4 2“ l l 1 303496
ELBOW 90°, INCREASED MALE THREAD Model 66302
with plastic pipe connection and increased male thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-20 x 1,9/2 3/4“ 11 l l l 5 10819025 x 2,3 1“ 11 l l l 5 10825132 x 2,9/3 1 1/4“ 11 l l l 5 10830540 x 3,6/3,7 1 1/2“ 11 l l l 5 10838150 x 4,5/4,6 2“ 11 l l l 2 108466
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
22 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
ELBOW COUPLING Model 66301
with 2 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
16 x 2 l l l 5 10584716 x 2,2 7,4 l l l 5 10585417 x 2 l l l 5 10587820 x 1,9/2 11 l l l 5 10591520 x 2,2 l l l 5 10592220 x 2,8 7,4 l l l 5 10594625 x 2,3 11 l l l 5 10597725 x 2,7 l l l 5 10598425 x 3,5 7,4 l l l 5 10599132 x 2,9/3 11 l l l l 5 10602832 x 2,9/3 11 l l l 5 36254732 x 3,5 l l l 5 10604232 x 4,4 7,4 l l l 5 10605940 x 3,6/3,7 11 l l l l 5 10610340 x 3,6/3,7 11 l l l 5 36255440 x 4,3 l l l 5 10611040 x 5,5 7,4 l l l 5 10612750 x 4,5/4,6 11 l l l l 2 10618950 x 4,5/4,6 11 l l l 2 36256150 x 5,4 l l l 2 10619663 x 5,7/5,8 11 l l l 2 10626463 x 5,7/5,8 11 l l 2 36258563 x 8,7 7,4 l l 2 10628875 x 6,8/6,9 11 l 1 362592
ELBOW COUPLING - FLANGE Model 66301F
flange connector with 2 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
63 x 5,7/5,8 11 l l 1 30362563 x 6,8 l l 1 30363275 x 6,8/6,9 11 l l 1 30367090 x 8,1/8,2 11 l 1 362660
110 x 10 11 l 1 362684
23
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
T-PIECE Model 6618
with 3 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
16 x 2 l l l 5 10956217 x 2 l l l 5 10959320 x 1,9/2 11 l l l 5 10963020 x 2,2 l l l 5 10964725 x 2,3 11 l l l 5 10969225 x 2,3 11 l l 5 36274525 x 2,7 l l l 5 10970832 x 2,9/3 11 l l l l 5 10974632 x 2,9/3 11 l l l 5 36276932 x 3,5 l l l 5 10976032 x 4,4 7,4 l l l 5 10977740 x 3,6/3,7 11 l l l l 5 10982140 x 3,6/3,7 11 l l l 5 36277640 x 4,3 l l l 5 10983840 x 5,5 7,4 l l l 5 10984550 x 4,5/4,6 11 l l l l 2 10990650 x 4,5/4,6 11 l l l 2 36278350 x 5,4 l l l 2 10991350 x 6,9 7,4 l l l 2 10992063 x 5,7/5,8 11 l l 1 10998263 x 5,7/5,8 11 l l 1 362790
T-PIECE - FLANGE Model 6618F
flange connector with 3 equal plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
63 x 3,6 17,6 l l 1 30371763 x 5,7/5,8 11 l l 1 30372463 x 6,8 l l 1 30374863 x 10,5 6 l l 1 303755
110 x 10 11 l l 1 110216
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
24 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
T-PIECE Model 6619
with 2 equal and 1 reduced plastic pipe connections
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
25 x 2,3 - 20 x 1,9/2 11 l l l 1 11032225 x 2,7 - 20 x 2,2 l l l 1 11033932 x 3,5 - 25 x 2,7 l l l 1 11039132 x 4,4 - 25 x 3,5 7,4 l l l 1 110407
40 x 3,6/3,7 - 32 x 2,9/3 11 l l l 1 11045240 x 4,3 - 32 x 3,5 l l l 1 11046940 x 5,5 - 32 x 4,4 7,4 l l l 1 110476
50 x 4,5/4,6 - 40 x 3,6/3,7 11 l l l 1 11053750 x 6,9 - 40 x 5,5 7,4 l l l 1 110551
T-PIECE Model 66180
with 2 equal plastic pipe connections and 1 male thread
Item may differ from the picture.
plastic pipedimension (mm) Gewinde SDR D W G H pkg.
unitEAN no.
4027848-12 x 2 3/8“ 6 l l l 1 11090220 x 1,9/2 1/2“ 11 l l l 1 11102220 x 2,2 1/2“ l l l 1 11103925 x 2,3 3/4“ 11 l l l 1 11108425 x 2,7 3/4“ l l l 1 11109125 x 3,5 3/4“ 7,4 l l l 1 111107
32 x 2,9/3 1“ 11 l l l 1 11113832 x 3,5 1“ l l l 1 11115250 x 4,5/4,6 1 1/2“ 11 l l l l 1 111299
25
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
T-PIECE, FEMALE THREAD Model 66181
with 2 equal plastic pipe connections and 1 reduced female thread
Item may differ from the picture.
plastic pipedimension (mm) thread SDR D W G H pkg.
unitEAN no.
4027848-25 x 2,3 1/2“ 11 l l l 1 11184825 x 2,7 1/2“ l l l 1 11185532 x 2,9/3 3/4“ 11 l l l 1 11189332 x 3,5 3/4“ l l l 1 11191632 x 4,4 3/4“ 7,4 l l l 1 11192340 x 4,3 1“ l l l 1 11198540 x 5,5 1“ 7,4 l l l 1 11199250 x 4,5/4,7 1 1/4“ 11 l l l 1 11205050 x 5,4 1 1/4“ l l l 1 112067
T-PIECE, FEMALE THREAD - FLANGE Model 66181F
flange connector with 2 equal plastic pipe connections and 1 reduced female thread
Item may differ from the picture.
plastic pipedimension (mm) Gewinde SDR D W G H pkg.
unitEAN no.
4027848-63 x 5,7/5,8 1 1/2“ 11 l l 1 30392263 x 6,8 1 1/2“ l l 1 30393975 x 6,8/6,9 2“ 11 l l 1 303977
Compression fittings with fixed insert pipeFlange connector with loose insert pipe - A1
made in Germany
26 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
FORCING NUT Model 6690
Item may differ from the picture.
plastic pipe dimension (mm) pkg. unit
EAN no.4027848-
12 20 11262314 20 11264716 20 11265417 20 11266118 20 11267820 20 11268525 20 11270832 20 11271540 10 11272250 5 11273963 5 11274675 2 112753
CLAMPING RING Model 6691
Item may differ from the picture.
plastic pipe dimension (mm) pkg. unit
EAN no.4027848-
12 20 11248714 20 11250016 20 11251717 20 11252418 20 11253120 20 11254825 20 11256232 20 11257940 10 11258650 10 11259363 10 11260975 5 112616
27
APPLICATION D l = Drinking Water G l = Gas W l = Water H/F l = Heating/DistrictHeating
Installation instructions see page 6/7 You have not found a suitable product? Please have a look at the product filter on our website www.beulco.de
PROFILE SEAL RING FOR FLANGE CONNECTORS Model 8893
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
63 l l 10 23902375 l l 5 239030
O-RING FOR FLANGE CONNECTORS
Model P66
Item may differ from the picture.
plastic pipe dimension (mm) SDR D W G H pkg. unit
EAN no.4027848-
90 l l 1 310760110 l l 1 349739
BEULCO® GmbH & Co. KG Kölner Str. 92 Postbox 1 20 Phone +49 2722 695-0 info@beulco.de
D-57439 Attendorn D-57425 Attendorn Fax +49 2722 695-5240 www.beulco.de
A1e 1/18b