Post on 02-Jul-2018
EDITION 2016
REPEATERS FOR CELLULAR TELEPHONE
GSM 900 MHz
DCS 1800 MHz
UMTS 2100 MHz
LTE 2600 MHz
THE MOST ADVANCED IN THE MARKET !THE MOST ADVANCED IN THE MARKET !
• EU APPROVAL CE0523 – CE1987• FREE USE• PATENT PENDING• SOLD AND USED IN MORE THAN 40 COUNTRIES WORLDWIDE
• EU APPROVAL CE0523 – CE1987• FREE USE• PATENT PENDING • SOLD AND USED IN MORE THAN 40 COUNTRIES WORLDWIDE
F IELD EXTENDERS
LTE 800 MHz
www.microset.net2
GSM - DCS - UMTS 3G - LTE 4G MOBILE TELEPHONEREPEATERS - FIELD EXTENDERS
The MICROSET repeaters - field extenders are very reliable and efficient equipments, useful to repeat the mobile telephone signal from outdoor (roof) where it is operative to indoor of the building where low level or absent, also outdoor-outdoor in shadow areas.
All models have RTTE ETSI test approval, free use and installation.Patent pending. Sold in more than 40 Countries all over the world.
Warning of imitations, they are not reliable and without test approval.Only MICROSET is experienced from more than 20 years.
Frequency bandsThe most popular bands in Europe for voice and GPRS data traffic are GSM 900MHz and DCS 1800MHz; 3G-UMTS and new LTE- 4G bands are useful mainly for fast internet use.There are available dual band models GSM+UMTS and GSM+DCS and both with LTE facility.
Communication capacityAll models are wide band and repeat all communications, the limit of the channels is only from the provider cell.The indicate channel capacity for each model is only the Rules recom-mendation, no channel limitation.
Standard delivery kitAll models include the necessary hardware for installation, including coaxial cables 10mt length with assembled connectors.Optional 10-20-33mt extension coax cables with plugs and kit splitter to expand and improve indoor coverage.
MICROSET PATENT – ALL RIGHTS RESERVED.
SPLITTER
REPEATER
SPLITTERREPEATER
www.microset.net
Typical applications:
- Houses- Offices- Restaurants- Hospitals- Large industrial areas- Factories- Underground car parks- Motorways and railways tunnels- Small valleys
3
Technical supportFor large applications like shopping centres, hotels, plants, warehouses, hospitals etc., MICROSET can make a project for easy, fast and sure installation.
Installation on mountains and remote areas by solar panels and battery for operating also without local power network.
Installation into motorway tunnels and galleries.
SPLITTER
UNDERGROUND CAR PARK
REPEATER
MOTOR WAY TUNNELS
REPEATER
REPEATER1 km
INTRODUCTION
TEST APPROVAL
FREE USE
www.microset.net4
Versions MONO PROVIDER: include external high gain directional antenna, useful where the outside signal level is low and only one provider to support, more operators service with cells placed on the same direction.
BAND MODEL VERSION TYPICAL COVERAGE
BT10 100-200m²
BT10-OM 80-150m²
BT20L-Standard 500-1.200m²
BT20L-OM 400-800m²
BT20-Standard 5.000-10.000m²
BT20-OM 4.000-8.000m²
BT20-CT4 500-1500mlinear coverage
2G GSM900MHz
Operate:Voice - dataGPRS-EDGE
FREQUENCY:815-890MHz935-960MHz
800-1.500m²2G GSM + DCSDUAL BAND900MHz+1800MHz Voice - data GPRS/EDGE
500-700m²
BT15-standard 100-200m²
BT15-OM 80-150m²
3G UMTS2100MHz
HSPA - Fast internet BT45 3.000-8.000m²
BT20-DCS 500-900m²DCS 1800MHz
Voice - data GPRS/EDGE
4G LTE2600MHz Ultra fast internet
BT20-LTE 600-800m²
MULTIBAND systems facility: BT20-DUAL GSM/UMTS + BT20-DCS
BT20-DUALstandard 800-1.500m²
BT20-DUAL/OM 400-700m²
BT20-DUAL/COL2
1.000-1.800m²
2G GSM3G UMTSDUAL BAND900MHz+2100MHz
Voice - data GPRS-EDGEHSPA - Fast internet BT20-
DUAL/COL4
Mono-provider
All providers
Mono-provider
All providers
Mono-provider
All providers
Mono-provider
Mono-provider
All providers
Mono-provider
All providers
Mono-provider
Mono-provider
Mono-provider
Mono-provider
All providers
All providers
All providers
Mono-provider
1.000-2.000m²
NEW
NEW
NEW
BT20-DUALG-D/OM
BT20-DUALG-D standard
SELECTION TABLE
4G LTE800MHz Fast internet
BT10-LTE 800 200-800m²NEW
More characteristics see:
Versions ALL PROVIDERS: include external omnidirectional antenna; use where outside signal level is full and more operators cells placed in different positions.
APPLICATION DOWN LINK GAIN PLUGS Vdc PAG.
BT20-DUAL GSM/UMTS + BT20-LTE - BT10 + BT10-LTE 800
outdoor-indoor 50-55dB SMA-F
SMA-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
TNC-F
SMA-F
SMA-F
9V
9V
9V
9V
9V
9V
9V
9V
9V
9V
9V
9V
9V
10V
10V
10V
12V
10V
6
outdoor-indoor 50-55dB 6
outdoor-indoor 65dB 7
outdoor-indoor 65dB 7
outdoor-indoor 90-95dB 8
outdoor-indoor 90-95dB 9
outdoor-outdoor 90-95dB 10
outdoor-indoor
outdoor-indoor
outdoor-indoor
outdoor-indoor
outdoor-indoor
esterno-interno
outdoor-indoor
outdoor-indoor
outdoor-indoor
outdoor-indoor
outdoor-indoor
65dB 15
1565dB
50-55dB 11
50-55dB 11
80dB 14
65dB 16
1765dB
65dB 12
65dB 13
13
13
65dB
65dB
ROOF ANTENNA
one directional LOG5 (30°)
one omni MC900 (360°)
one directional LOG10 (20°)
one omni MC900 (360°)
two directional LOG10 (20°)
two omni MC900 (360°)
two directional LOG10 (20°)
one directional MD14-GD (70°)
one omni MD6 (360°)
one directional MPU15 (60°)
one omni MD3 (360°)
two directional MPU15 (60°)
one directional MPD15 (70°)
one directional M15-LTE (50°)
one directional MD14 (70°)
one omni MD6 (360°)
Collinear COL2
Collinear COL4
(2 panels)
(4 panels)
www.microset.net 5
SMA-F 9Voutdoor-indoor 1750-55dB
www.microset.net6
The BT10 is a professional repeater with 50-55dB gain, very reliable and efficient able to cover up to 200-300 square meters.It operates on GSM 900MHz wide band for voice and GPRS/EGDE data. Useful to expand up to 20 simultaneous communications inside building where signal is poor or absent from roof where well operative.
The STANDARD or single provider version uses an external high gain directional antenna, 30° coverage angle, that must be set-up to provider cell.
The OM version called multi-providers uses omnidirectional roof antenna operative on 360° with limited gain, not needs any direction set; only for high level roof signal application.
Typical Applications: houses, offices, shops, restaurants, small buildings.
Delivery kit: All the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 50-55dB gain• 1 power supply 230VAC 50Hz
Options : 2-ways kit splitter mod. KS2-10 to expand indoor coverage on 2areas. Extension coax cable 10m PR10-SMA. Indoor ceiling omnidirectional antenna C7.
Small-medium coverage 200-300m² - Gain 55dB
2G REPEATERGSM/GPRS 900MHz
GOOD PERFORMANCE , VERY RELIABLE
Indoor Coverage: 200-300m²
Copertura interna: 80-150m²
SINGLE PROVIDERBT10-STANDARD
MULTI PROVIDERBT10-OM
BT 10
www.microset.net 7
Medium-large coverage up to 3000m² - Gain 65dB
2G REPEATERGSM/GPRS 900MHz
The BT20L is a professional repeater with high gain 60-65dB and automatic level control (ALC), very reliable and efficient, able to cover up to 1200 square meters, expandable by optional kit splitter and adequate project up to 2.000-3.000 square meters of indoor coverage.It operates on GSM 900MHz wide band for voice and GPRS/EGDE data (low speed); typical capacity up to 30-40 simultaneous commu-nications from outside building where signal is well operative to inside where poor or never.
The STANDARD version called single provider uses an external high gain directional antenna, 20-30° radiation pattern, that must be directed to provider cell.
The OM version called “all providers version” uses external omnidi-rectional antenna operative with limited gain but it not need any direction set (360° radiation), usable only with high level roof signal.
Applications: shops, restaurants, offices, plants, buildings, tunnels, underground car-parks etc.
Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz
Options: Kit splitter KSL 2-3 ways to improve indoor coverage.Extension coax cables PR10-20-33.Indoor ceiling omnidirectional antenna C7.Collinear roof antenna COL2 or COL4 very high gain.Project for big building installation.
Indoor Coverage 500-1200m²
Indoor Coverage 400-800m²
SINGLE PROVIDERBT20L-STANDARD
MULTI PROVIDERSBT20L-OM
BT 20L
www.microset.net8
The BT20 is a powerful and very reliable repeater for mobile telephone applications on GSM 900MHz band and supports voice and GPRS/EDGE standard speed data traffic.
Very high gain better than 95dB on down-link channel with low noise antenna preamplifier, it is useful also in critical applications for wide coverage areas up to 10.000 square meters and typical channel capacity up to 30-40 simultaneous communications.
Double antennas system up-link and down-link: two roof external antennas and two inside coverage antennas are necessary for high gain operation.
The BT20-STANDARD called one provider direction version includes two directional roof antennas high gain (14dBi), 20-30° radiation pattern, that must be directed to provider cell.
Options: Kit splitter to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7. Project for big building installations.
Wide coverage - Gain 95dB
2G REPEATERGSM/GPRS 900MHz
External signal level:
min 2 on 5 fullExternal antennaradiation pattern
ONE PROVIDER DIRECTIONBT 20-STANDARD
Indoor Coverage :up to 10.000m²
BT 20
www.microset.net 9
Wide coverage - Gain 95dB
2G REPEATERGSM/GPRS 900MHz
MULTI PROVIDERSBT 20-OM
The BT20-OM or multiprovider version includes two omnidirectional roof antennas MC900 operative on 360° with limited gain (6,5dBi) but they not need any direction set, mostly useful in application with high signal level on roof.
Applications:large industrial areas, factories, shopping centres, hotels,motorways and railways tunnels, underground car parks etc.
Typically from OUTSIDE to INSIDE building where signal is normally poor or never.
Delivery kit includes all the main hardware for easy installation:• 2 roof antennas with 10mt cable and connectors• 2 indoor panel antennas with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50-60Hz
External antennaradiation patternExternal
signal level:min 3-4 on
5 full
Indoor Coverage :up to 8.000m²
BT 20
www.microset.net10
NECESSARYOPERATINGCONDITION:
• GOOD INPUT SIGNAL LEVEL
• CLEAR SIGNAL DIRECTLY FROM PROVIDER CELL
• WELL INSULATION BETWEEN INPUT AND OUTPOUT ANTENNAS
Outdoor-outdoor application - Gain 95dB
2G REPEATERGSM/GPRS 900MHz
Installation insmall valley
The BT20-CT4 is an efficient and very reliable repeater for mobile telepho-ne OUTDOOR-OUTDOOR applications able to extend GSM/GPRS signal on 900MHz band on small valleys, villages, hills and open-space working areas, shadow zones.
It operates on wide band and supports voice and GPRS/EDGE standard speed data traffic with capacity of 20-30 simultaneous communications.
Very high gain better than 95dB in down-link channel with low noise antenna preamplifier. It uses double antennas system: two directional antenna on input side (radiation pattern 20-30°) and two High Gain collinear output antennas with adjustable radiation pattern.
Delivery kit includes all the main hardware for easy installation:• 2 input directional antennas LOG10 with 10mt cable andconnectors• 2 output collinear antennas CT4 (max coverage 180°) with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50Hz
Options:Extension coax cables PR10-20-33mt.Solar panel with battery kitVery high gain input collinear antennas COL2-COL4.
Installation: input antennas must be placed on good signal position,output collinear antennas on shield position than input side againstoscillations and signal interference also at provider network.
Installation only from well trained personnel.After installation check correct operation by spectrum analyzer instrument.
BT 20 - CT4
www.microset.net 11
Medium coverage 200-300m² - Gain 55dB - High speed data transmission
3G REPEATERUMTS 2100MHz
The BT15 is a professional repeater on UMTS band with good gain 50-55dB, very reliable and efficient able to cover up to 200-300 square meters indoor.It operates on 3G UMTS 2100MHz wide band for internet data high medium speed traffic (UMTS/HDPA) and it can repeat many simulta-neous communications inside building where signal is poor or absent from roof where well operative.
BT15 can’t support voice on GSM 900MHz nor DCS 1800MHzband.
The BT15-STANDARD or single provider version uses an external high gain panel antenna, wide coverage pattern 70°, that must be directed to provider cell.
The BT15-OM version or multi-providers version includes roof omnidi-rectional 360° antenna with limited gain but it not need any direction set, usable only with very high signal level on the roof.
Typical Applications: houses, small offices, shops, restaurants,small buildings.
Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 50-55dB gain• 1 power supply 230VAC 50Hz
Options : 2-ways kit splitter to expand indoor coverage on 2 areas. Extension coax cable 10m PR10-SMA. Indoor ceiling omnidirectional antenna C7.
Indoor Coverage: 100-200m²
Indoor Coverage: 80-150m²
SINGLE PROVIDERBT15-STANDARD
MULTI PROVIDERBT15-OM
BT 15
www.microset.net12
The BT20-DUAL is a professional dual band GSM/UMTS repeater for mobile telephone applications with high gain 60-65dB and automatic level control (ALC) and interference alarm, very reliable and efficient, able to cover up to 1.000 square meters expandable, with kit splitter option and adequate project can reach 2.000-3.000 square meters of indoor coverage.
It operates on two bands at the same time: GSM 900MHz wide band for voice and GPRS/EGDE data (low speed) and 3G-UMTS 2100MHz for fast internet traffic on wide band.
Useful to extend typically 20-30 simultaneous communications from outside building where signal is well operative to inside where poor or absent.
The BT20-DUAL-STANDARD or one provider direction version uses an external panel antenna MD14 with high gain (14dBi) that must be directed to one or more provider cells into radiation pattern 60-70°.
For all providers application and low external signal condition, it is recom-mended a collinear high gain antenna COL2 or very high COL4, also on kit splitter use.
ONE PROVIDER DIRECTIONBT20-DUAL/STANDARD
External signal level:
min 2 on 5 full
External antennaMD14radiation pattern
Indoor Coverage : 800-1500m²
Medium-large coverage up to 3000m² - Gain 65dB
2G GSM 900MHz 3G UMTS 2100MHz DUAL BAND
BT 20-DUAL
www.microset.net 13
The BT20-DUAL/OM or multiprovider version includes an external omnidirectional antenna MD6 operative on 360° with limited gain (6dBi) but it not need any direction set, usable just high signal level on roof and only one indoor antenna.Kit splitter applications, use COL2-COL4 antennas option.
Applications:offices, factories and warehouses, shopping centers, hotels, restau-rants, underground car parks, houses.
Delivery kit includes all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz
Options: Kit splitter to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7. Collinear high gain roof antenna COL2 -COL4. Project for big installations.
MULTI PROVIDERSBT20-DUAL/OM
Indoor Coverage : 400-800m²
External signal level:min 3-4 on
5 full
External antennaMD6radiation pattern
Medium-large coverage up to 3000m² - Gain 65dB
2G GSM 900MHz 3G UMTS 2100MHz DUAL BAND
BT 20-DUAL
www.microset.net14
Wide coverage - High gain 80dB - High speed data transmission
3G REPEATERUMTS 2100MHz
The BT45 is a professional, powerful and very reliable repeater for mobile telephone applications on 3G UMTS 2100MHz band and supports fast internet data traffic.
Very high gain better than 80dB on down-link channel with low noise antenna preamplifier, it is useful also in critical applications to expand signal on wide coverage areas 3.000-8.000 square meters.
Typical channel capacity up to 10-20 simultaneous communications from outside building where signal is well operative to inside where poor or absent.BT45 can’t support voice on GSM 900MHz nor DCS 1800MHz band.
Double antennas system up-link and down-link: two roof external antennas and two inside coverage antennas are necessary for high gain operation.
Applications: offices, shops, hotels, plants, houses etc.
Delivery kit includes all the main hardware for easy installation:• 2 roof antennas with 10mt cable and connectors• 2 indoor antennas with 10mt cable and connectors• 1 main amplifier• 1 antenna preamplifier• 1 AC power supply 110-230VAC 50Hz
Options:Kit splitter to improve indoor coverage Extension coax cables
PR10-20-33. Indoor ceiling omnidirectional antenna C7.
Indoor Coverage : 3.000-8.000m²
External antennaMPU15radiation pattern
BT 45
www.microset.net 15
2G GSM 900MHzDCS 1800MHz DUAL BAND
The BT20-DUAL GD is a professional dual band GSM/DCS repeater for mobile telephone applications with high gain 60-65dB, automatic level control (ALC) and interference alarm, very reliable and efficient, able to cover up to 1.000 square meters expandable, with optional kit splitter and adequate project can reach 2.000-3.000 square meters of indoor coverage.It operates on two bands at the same time: GSM 900MHz and DCS 1800MHz wide band for voice and GPRS/EGDE data with typical capaci-ty 20-30 simultaneous communications from outside building where signal is well operative to inside where poor or absent.
The STANDARD version uses an external panel antenna with high gain (14dBi) that must be directed to provider cell, to prefer with low external signal.
The OM or multiprovider version includes external omnidirectional 360° antenna with limited gain doesn’t need direction set. Usable only with very high signal level on the roof (full range).
Applications: shops, restaurants, offices, factories houses, tunnels, underground car parks, etc.
Delivery kit includes all the main hardware for easy installation:• 1 roof antenna with 10mt cable and connectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB gain• 1 power supply 230VAC 50Hz
Options: Kit splitter KSD-GD 2-3 ways to improve indoor coverage. Extension coax cables PR10-20-33. Indoor ceiling omnidirectional antenna C7 Collinear high gain roof antenna COL2-GD or very high gain COL4-GD
Indoor Coverage: 800-1500m²
Indoor Coverage: 500-700m²
SINGLE PROVIDERBT20-DUAL G-D STANDARD
MULTI PROVIDERBT20-DUAL G-D / OM
NEW
Medium-large coverage up to 3000m² - Gain 65dB
BT20-DUAL G-D
www.microset.net16
Voice and GPRS/EDGE data trafficGain 65dB
DCS REPEATER 1800MHz
The BT20-DCS is a new professional repeater with high gain 60-65dB and automatic level control (ALC), very reliable and efficient, operative on DCS 1800MHz wide band for voice and GPRS/EDGE data traffic, able to cover up to 900m² expandable by kit splitter, typical capacity up to 10-20 simultaneous communications.BT20-DCS usable to extend the signal from roof where is well to inside building where it is poor level or never.
BT20-DCS can be installed alone or combined with a BT20-DUAL to have 3 bands repeater system GSM-DCS-UMTS.See below installation example.
Delivery kit : all the main hardware for easy installation:• 1 roof high gain panel antenna MPD15 with 10mt cable andconnectors• 1 indoor antenna with 10mt cable and connectors• 1 amplifier 60-65dB• 1 power supply 230VAC 50Hz
Options: Expanding Kit splitter 2 or 3-ways Extension coax cables PR10-PR20-PR33 Indoor ceiling antenna C7 Roof high gain collinear antenna 2 or 4 panels.
Indoor Coverage: 500-900m²
NEW
External antennaMPD15radiation pattern
3-bands GSM-DCS-UMTS
NEW
BT20-DCS
The BT20-LTE 4G is a new reliable and very efficient repeater with high gain 60-65dB and automatic level control (ALC), operative on the new LTE band 2600MHz with very fast data speed of data transmission up to 100Mb. Actually the LTE network is in progress but still operative in the main cities.
Useful to extend many simultaneous communications from roof where signal is well operative, to inside building where poor level or absent.
BT20-LTE can be installed alone, monoband system, or combined with other Microset repeaters to obtain 3-bands or 4-bands systems. See below installa-tion examples.
The new BT10-LTE 800 operates on low band 800MHz usable on rural area far away from provider cell, for fast data communications.Combine facility with BT10-GSM900.
Delivery kit: all the main hardware for easy installation:• 1 roof antenna with 10mt cable and assembled connectors• 1 indoor panel antenna with 10mt cable and connectors• 1 amplifier 55-65 gain• 1 power supply 230VAC 50Hz
Options: COL2 LTE high gain collinear antenna Kit splitter 2-3 ways.
www.microset.net 17
Ultra fast data - Gain 65dB
4G REPEATERLTE 800-2600GHz
BT20-LTENEW
BT10-LTE 800
KIT SPLITTER5 WAYS
KIT SPLITTER2 WAYSMP10-4
MP10-4
BT20LTE
COMBINERCOMBINER 1
COMBINER 2
LTEGSMUMTS GSM
UMTS
M15-LTE
LTE
M15-LTEDCSMPD-15MD14
COL-2 COL-24-bandsGSM-DCS-UMTS-LTENEW
OUT IN
BT20LTE
OUT IN
BT20DCS
OUT INBT20DUAL
IN OUT
BT20DUAL
IN OUT
MD14
3-bandsGSM-UMTS-LTENEW
www.microset.net18
SINGLE cable system
KIT SPLITTER MODEL REPEATER APPLICATION
KS2-10
BT20L KSL2 KSL3
2 ways
2 ways 3 ways
DOUBLE cables system Up-down link
BT10
KS2-15 2 waysBT15
BT20-DCS KS2-DCS KS3-DCS
2 ways 3 ways
BT20-DUAL KSD2 KSD3
2 ways 3 ways
BT20-DUAL G-D KSD2-GD KSD3-GD
2 ways 3 ways
BT20-LTE KS2-LTE KS3-LTE
KSP2-45KSP3-45
2 ways 3 ways
KIT SPLITTERFOR REPEATERS
The kit splitters, joined to Microset repeaters, are useful to expand the mobile telephone signal into building with several floors or different rooms with walls to limit signal propagation.
All kit splitters include the main hardware for installation:additional antennas, coaxial combiners, 10mt coax cables withassembled connectors.
2 ways Kit splitter: totally 2 indoor antennas 3 ways Kit splitter: totally 3 indoor antennas.
Option:Extension low loss coax cable units.Project of installation for large application.
BT20 KSP2KSP3
2 ways 3 ways
3 ways BT45 2 ways
KSP2 2 ways KSP3 3 wayse
DOUBLE CABLES VERSIONSCOMBINER 2 VIE
BT20BT40BT45
TX RX
TX RX3-4m
BT20 SPLITTER
KS
www.microset.net 19
KIT SPLITTERAPPLICATION
COMBINER 3 WAYS
COMBINER 2 WAYS
COAX CABLES length 10mtincluded in BT20L/BT20DUAL
BT20 LBT20-DUAL
TNC
TNC
TNC
TNC
TNC
TNC TNC
TNC TNC
SPLITTER
REPEATER
SPLITTERREPEATER
2 WAYSKIT SPLITTER
4 WAYSKIT SPLITTER
KSL2 + KSL3KSD2 + KSD3
3 WAYSKIT SPLITTER
DIRECTIONALOMNIVERSION
10mt 10mt
BT10-BT15 BT20 LBT20 DUAL BT20-DCSBT20-LTE
PANELOMNIVERSION
BT20 L BT20 DUALBT20-DCS BT20-LTE
10mt
10mt
10mt
COLLINEAR PANEL
ROOF ANTENNAGSM 900
UMTS 2100
ROOM 1 ROOM 2
ROOM 3 ROOM 4
10mt
10mt
10mt
10mt
Installation on multifloorbuilding.
Underground multi-floors carparks.
SINGLE CABLE VERSIONS
KS
www.microset.net20
COAX CABLEEXTENSIONS
Very low loss coaxial cables units useful to extend over 10mt standard delivery coax cables (for outdoor and indoor antennas); supplied with assembled connectors and electric test.Three available versions:
• PR use TNC male/TNC female Useful to extend antenna cables,All repeaters (except BT10-BT15)
• PRS use two connectors TNC maleSplitter to splitter connection:
• SMA available only 10mt length,Use SMA male / SMA femalefor BT10-BT15 repeaters cables.
Cable Diameter Ø 15 mmConnectors size Ø 20 mmBend radius 40 mm
LOW LOSS COAX CABLES
VERY LOW LOSS COAX CABLESMICROWAVE AND LONG APPLICATION
WARNING!Different types of coaxial cables, not original Microset, couldreduce drastically the repeater efficiency.
CONNECTOR SIZE
TNCfemale
TNCmale
MODEL CONNECTORS LENGHT(mt)
DIAMETERØ (mm)
INSERTION LOSS900MHz 2000MHz
PR 10
PR 20
PR 33
PR10-SMA
PRS 10
PRS 20
PRS 33
10 10 TNC M/F 2.0dB 2.8dB
20 10 TNC M/F 3.5dB 5.0dB
33 10 TNC M/F 6.0dB 8.0dB
10 5 SMA M/F 3.5dB 5dB
10 10 TNC M/M 2.0dB 2.8dB
20 10 TNC M/M 3.5dB 5.0dB
33 10 TNC M/M 6.0dB 8.0dB
MODEL LENGHT(mt)
INSERTION LOSS1GHz
PRL 10
PRL 20
PRL 30
PRL 40
PRL 50
10 1.0dB 1.5dB
20 2.0dB 2.8dB
30 3.0dB 4.5dB
40 4.0dB 5.5dB
50
CONNECTORS
TNC M-M
TNC M-M
TNC M-M
TNC M-M
TNC M-M 4.8dB 7.0dB
NEW
2GHz
PR-PRS-PRL
www.microset.net 21
Service also with short and long black-out
D.C. UNINTERRUPTIBLE POWER SUPPLY FOR REPEATERS
Solar panel system able to generate DC “green” power from the sun, for supplying Microset repeaters or others electronic equipments and lights, without use any fuel.
Includes:1 solar panel 230-250W2 batteries 12V 40Ah1 DC-DC converter from 24VDc to out 9V / 12Vdc1 connection wiring
Mod. PF12 Output 12VMod. PF 9 Output 9V
SOLAR GENERATOR
Solar panel24Vdc 250W
2 Batteries12V 40Ah
DC-DCConverter
IN24Vdc
OUT 12Vdc or 9Vdc
BT10BT20BT45
NEW
NEW
Usable with BT20-DUAL – BT20L – BT20-DCS – BT10 – BT15
Mod. MSB7 Output 9Vdc Autonomy 10-15 hours
Mod. MSB15 Output 9Vdc Autonomy 20-30 hours
Usable withBT20LTE – BT20 CT4 – BT45.
Mod. MKB7 Output 12Vdc Autonomy 10-15 hours
Mod. MKB15 Output 12Vdc Autonomy 20-30 hours
Option:IP65 waterproof box.
MSB-MKB
www.microset.net22
INDOOR ANTENNAS
850-960MHz 1700-2200MHz
Polarization:Plug: Impedance:Mounting: Size (mm):
4-bands GSM-UMTS-DCS-LTE Version.
FREQUENCY GAIN
GSM ANTENNA
ROOF OMNIDIRECTIONAL ANTENNAS
MP10-DUAL
MP10-4
3-BANDS GSM-DCS-UMTS PANEL ANTENNAWALL INSTALLATION
850-960MHz 1700-2200MHz
Polarizzation:
Plug:
Impedance:
Mounting:
Size:
4-bands GSM-UMTS-DCS-LTE Version.
FREQUENCY GAIN
C7
C7-LTE
MC900 GSM-DCS-UMTS ANTENNA
Polarizzation:
Plug:
Impedance:
Mounting:
Size:
MD6
3-BANDS GSM-DCS-UMTSCEILING INSTALLATION
850-960MHz
FREQUENCY GAIN850-960MHz 1700-2200MHz
FREQUENCY GAIN
10dBi 180°12dBi 160°
VERTICALTNC female50Ωon wall by clamps included L 255 x P 80 x H 145
7dBi8dBi 360°
VERTICALTNC female50Ωceiling installationL 260 x P 126 x H 130
VERTICAL
BNC female
50Ω
on mast
H 520mm, Ø 25mm
VERTICAL
N female
50Ω
on mast
H 500mm, Ø 50mm
6.5dBi 360° 6dBi 360°
NEW
NEW
Polarization:Plug: Impedance:Mounting: Size (mm):
www.microset.net 23
HIGH PERFORMANCE COLLINEAR ANTENNA
4 wayscombiner
Very rugged high gain collinear antenna for outdoor installation to havean efficient aerial system and variety of pattern direction.Recommended to increase the low level signal or to compensate theloss of long coax cables or the attenuation of kit splitter use.
• COL2 includes: two panels, splitter TNC female plug and conection set.• COL4 includes: four panels, splitter N female plug and connection set.
Each panel can be directed on different positions to expand radiation or only one direction to improve a lot gain and efficiency.High speed wind and snow resistance, operative also with very lowtemperature environmental -50°C.
Also available DCS and LTE band.
COL 2 COL 4
880-960MHz 14dBi 120° 14dBi 360°1800-2170MHz 16,5dBi 90° 21dBi 90°
Frequenct: Gain: Gain:
850-960MHz 14dBi 70°1800-2170MHz
Frequency: Gain: Coverage:
RADIATIONPATTERNHorizontal
Max coveragepattern:360°
2 wayscombiner
RADIATIONDIAGRAMHorizontal
Max coveragepattern:120°
GSM-UMTS
DUAL BANDPANEL ANTENNA
Polarizzation: VERTICALPlug: N femaleImpedance: 50ΩSize (mm): W310 x D 90 x H 365
Also available GSM-DCS band version.
MD 14
Via A. Peruch, 64 - 33077 SACILE (PN) - ItalyTel. +39 0434 72459 - Fax +39 0434 72450e-mail: info@microset.net
www.microset.net
Your local distributor:
PATENT PENDING. ALL RIGHTS RESERVED.Total or partial copy of pictures, photos, texts and design are
not allowed, only facility by written authorization from MICROSET.
Characteristics could change without notice.