RECYCLING FOR

CARNIVAL

RECYCLED MATERIAL

Plastic Cardboard Spray

Material That Was Not Recycled Thread Inch tape Star shapes Glue

THE GODDESS OF THE SEA

STEP 1 IT ALL STARTED WITH A PIECE OF

PLASTIC!!

STEP 2: I THEN FOUND A DESIGN THAT LOOKED APPROXIMATELY THE

SAME DESIGN I WANTED

The pattern of the skirt sketched on plastic ...

STEP 3: WAS THAT WHEN I CUT THE PATTERN I SAWED THE PIECES TOGETHER.

The process of sawing

STEP 4: “THE SPRAYING”The final process after sawing

I then sprayed the plastic with spray that I found in my fathers garage

STEP 5 “THE FRILLS”The frills were cut and sawed to the skirt too...

The frills sawed to the skirt...

STEP 6 “THE STARS”After the frills stars were cut... and sprayed

And then stuck to the skirt...

“THE TOP”A piece of plastic cut for the top...

The top was then “shaped” with a recycled thread...

STEP 6: “THE SPRAYING”

Before spaying.. The top painted in blue

STEP 7:“THE DECORATIONS”

The stars were stuck...

The top was decorated with beads too... And other decorations were added

STEP 8: “THE FASTENING”

The top was fastened with Velcro

STEP 9:THE HEADDRESS MATCHING THE COSTUME

THE

FINISHING

PRODUCT

Age: 13

School: St.Dorothy’s Senior School Zebbug

Teacher: Ms. Josianne Sacco