Post on 21-Dec-2015
description
Examples of CAD modeling work
realized by
Kirill Yurkevich
Contacts:
e-mail: kirill.bsu@gmail.com
skype: kirill_bsu
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
2
Part Design in CATIA V5 1. Restore models from imported files (e.g. igs, stp etc.).
Air distributor
Oil box
Other parts
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
3
2. Creating 3D model from 2D drawing.
2D drawing of the cover
3D models of the cover developed using 2D drawing
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
4
3. Creating a part with the same mass and center of gravity for substitution real details in a car before crash test.
Parts assembly
Developed part Sheet Metal Design in CATIA V5 1. Creation of the support for the tube.
Support for the tube 2. Creation of the supports for the different parts with the following drawings.
Developed supports (in grey color)
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
5
3D models of supports (in grey color)
2D drawings development
Supports drawings
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
6
3. Creation of fixations for fuel tank with the following 2D drawings
3D model of fuel tank
Fixations in different places (in grey color)
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
7
4. Restore 3D models from imported files using sheet metal design with the following 2D drawing.
Restored 3D model 2D drawing of the restored 3D models
5. Developed of the thermo shields design taking into account nearest environment
Thermo shields
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
8
Piping design in CATIA V5 1. Piping development.
3D models of the pipe with basic points
2D pipe drawing
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
9
2. Exhaust pipe 3D modeling and 2D drawing creation.
3D model of the exhaust pipe (in blue color)
2D drawing of the exhaust pipe Assembly Design in CATIA V5
Steering column
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
10
Biomechanical modeling in CATIA V5 1. Creation 3D model of the human skull using tomography data.
2. Modeling of complex dental surfaces by the example of crowns for canine tooth.
Canine, layer of glue and crown
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
11
3. Human bones modeling using tomography data
CAD projects realized by Kirill Yurlevich kirill.bsu@gmail.com
12
Assembly design in SolidWorks 1. Assembly of front porch designed in SolidWorks and produced after that at metal con-struction company.
Assembly of front porch in SolidWorks
Real construction of front porch
2. Porch is designed in SolidWorks and produced after that at metal construction company.
Assembly of porch in SolidWorks Real construction of porch