Post on 30-Sep-2020
Please keep this manual for future reference
FMT1100
WingthingInstruction Manual
T: +44 (0)1582 661993 F: +44 (0)1582 667100 E: sales@fastmovertoolsuk.com
FMT1100 Parts & Instructions
Operating Instructions
Fast Mover Tools Ltd
T: +44 (0)1582 661993 F: +44 (0)1582 667100 E: sales@fastmovertoolsuk.com
www.fastmovertoolsuk.com
AboutThe ideal space saving mini stand. Ideal for holding a wing in the position you find it on the
vehicle to enable easier blending with a adjacent panel.
Safe Usage1 Build up the Trestle ensuring all the fixings are tight.
2 Check that panels are correctly and securely mounted on the stand before use.
3 Always use the FMT1100 Wingthing on a level surface. Don’t attempt to use it if the
stand is rocking or in anyway instable.
4 The FMT1100 Wingthing is designed for vehicle panel preparation and spraying. Do
not use this piece of equipment for any other purpose than that intended. MISUSE OF
ANY TOOL OR STAND COULD LEAD TO SERIOUS INJURY AND DEATH.
5 Always wear relevant PPE in accordance with HSE guidelines and your own Health and
Safety policy.
6 Make sure that your working environment is clean and tidy.
7 Be aware of other persons’ activity around you and remember that your action may
have a direct effect on people and property.
Assembly Instructions1 Bolt lower centre support to base using 2 x 8mm Set Screws.
2 Locate 10mm finger screw in lower centre support.
3 Slide T-frame into lower centre support and secure with finger screw. Insert 25mm Sq
end caps.
4 Assemble and mount FMT131 Swivel Locking Device into T Frame.
5 Insert 10mm cranked bar with end cap into swivel locking device.
6 Place foam onto T Frame.
7 Load wing and off you go!
Take care of the environmentAlway dispose of packaging in a
responsible manner.
Please keep this manual for future reference
Diagram & Parts List
Fast Mover Tools Ltd
T: +44 (0)1582 661993 F: +44 (0)1582 667100 E: sales@fastmovertoolsuk.com
www.fastmovertoolsuk.com
Parts DiagramRef Q’ty Code Description
1 1 FMT1100/1 Swivel Lock Tube
2 1 FMT1100/2 Top T Frame
4 1 FMT1100/3 Base Upright
5 1 FMT1100/4 Cranked Bar
6 1 FMT1100/5 Protective Foam
7 1 FMT1100/6 Base
8 2 FMT1100/7 10mm Plastic Cap for FMT110/4
9 1 FMT131 Swivel Lock Device
10 2 M8X50 M8 x 50 Set Screw
11 2 M8N M8 Nyloc
12 4 M8WASHER M8 Washer
13 2 25SQBUNG 25mm Square Bung
14 1 FMT132 Thumb Screw
7
10
4
1
9
2
6
8
13
1112
8
14
5
FMT1100 Parts & Instructions
FMT3006
Good Quality LVLP Spraygun at a
great value price
FT900
3” Polishing Kit
Every workshop needs one
AB-17G
Great value HVLP Spraygun
Have you tried these?
Fast Mover Tools Ltd
T: +44 (0)1582 661993 F: +44 (0)1582 667100 E: sales@fastmovertoolsuk.com
www.fastmovertoolsuk.com
Call your local stockist for
more information