Post on 11-Feb-2022
PRORAILMANUFACTURING™
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.netWebsite: www.prorailmfg.com
Dean WieserPresident
John J. HumphreyVice President
Revised 1/05
PRORAILMANUFACTURING™
SWITCH POINT ROLLER
FEATUR
• Open frame c• Carrying han• Adjustable ti• Spring loaded• Full contact f• All hardware• Pre-lubricate
bushings.• Works on ma• Installs on an• Works on an• Easy installat
MODEL SA6Patent No. 5, 501, 418
ES & SPECIFICATIONS
onstruction. • No drilling of rail during assembly.dle. • Maintenance free.
e-bar. • Low cost. adjustable roller cage. • Shipped fully assembled in a box.
riction secured rail base clamp. • Weight - 82 lbs. each set (2 per set). is zinc plated, grade five.d rollers with oil impregnated
• Help reduce back injuries.nual and power switches. • Help reduce wear on turnouts.y size turnout. • Lower maintenance costs.
y size rail. • Eliminate graphiting plates.ion and removal. • Decrease amperage.
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
BENEFITS
SIGN POST HOLDERMODEL SS3
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
• Carrying Handle• Fins to Prevent Rotation• High Impact/Replaceable Driver• Sign Pins Included• Pinned Post Base• Flag Mounts• Overall Length 36”• Weight: 15 lbs.
FEATURES & SPECIFICATIONS
* Flag & Post Not Included
PRORAILMANUFACTURING™
FLAT BAR SIGN STANDMODEL FB9
* 3/8” Pin With Head Used With Mini Flags
FEATURES & SPECIFICATIONS• Carrying Handle
• High Impact Replaceable Driver
• 3/8” thru Holes For Mounting Flag(11” and 16” Centers)
• 3/8” Pins with Heads(11” Centers)
• Easy Driving
• Overall Length: 51”
• Weight: 17 lbs.
PRORAILMANUFACTURING™
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
FEATURES &
SPECIFICATIONS
Remove Twist At Rail Joint During
Welding
Specializing At Joints Near Frogs
And Switches
Move Head Of Rail While Keeping
The Base Stationary
Can Be Used By One Person
From Alignment To Start Of Weld
Is Only Minutes
Can Be Used On Any Size Rail
Carrying Handle
One Piece Design
Weight 18 lbs.
RAIL JOINT ALIGNMENT TOOL MODEL PeeWee
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022
Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
FEATURES & SPECIFICATIONS
TIE PLUG DRIVERMODEL PD52
• Hand Grip
• 5/8” Square Hardened Driver
• Hand Protector Eliminates Pinch Point
• Internal Impact Resister Eliminates Distoration
• Overall Length: 58”
• Weight: 10 lbs.
PRORAILMANUFACTURING™
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
SPECIALTY TIE PLATES
FEATURES & SPECIFICATIONS
• Tie Plate Can Be Made To Your Specifications
• Can Be Made To Use On Any Tie (Concrete, Steel or Wood)
• Can Be Made With Cants
• Are Used With Weld On Shoulders
PRORAILMANUFACTURING™
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
• Zinc plated hardware included
• High quality exterior gray paint and prime
• Reflective tape for visibility
• Easy 3 step assembly instructions
FEATURES & SPECIFICATIONS
• Easy storage and removal
• Holds eight rail heater covers,one switch heater cover andfour center covers
• Locking capabilities
• Base is mounted in ground for stability
HEATER COVER STORAGE RACKMODEL: FR8-A4CC
Patent No. 6,571,963 B2
PRORAILMANUFACTURING™
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
Rack shown with no covers Rack shown with covers
Drift pin not included
• Absorbs impact of driving device
• Provides a large flat striking surface
• Increases life of drift pin
• Eliminates shrapnel for safety
• Lab tested for durability
• Can be installed on new or used drift pins
• Can be custom designed for special applications
FEATURES & SPECIFICATIONS
PRORAILMANUFACTURING™
DRIFT PIN STRIKING PADMODEL: DV10
Patent No. 6,854,945
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
• 7500# capacity
• Deck size 6’ x 8’
• 16” wheels
• Roller bearing stub axle
• All welded steel construction
OPTIONS:
• Customer specifications or specialapplications can be quoted
• Tow bar
• 3 axle carts
PRORAILMANUFACTURING™
RAIL CARTMODEL RC75
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
FEATURES & SPECIFICATIONS
PRORAILMANUFACTURING™
PORTABLE TURNOUTPatent Pending
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
• Includes one Ramp and eight Panels
• 20’ long Panels
• Each Panel Weighs Approximately 3,000#
• Uses 90# Rail with Joint Bars
• Leveling Jacks on Panels Locatedover Main Line Rail
• Pick Up Points on All Panels and Ramp
• Left Hand or Right Hand Installation
• Chain Sling Provided
OPTIONS:
• Outriggers for Support
• Panels for Portable Spur
FEATURES & SPECIFICATIONS
PRORAILMANUFACTURING™
SELF-DRIVING SIGN STANDMODEL SD20
2901 S.W. 7th Street • P.O. Box 288 • Atlantic, Iowa 50022Ph: 712-243-5411 • Fax: 712-243-3938
Email: prorail@metc.net • Website: www.prorailmfg.com
FEATURES & SPECIFICATIONS• Handles for Easy Driving
• High Impact Replaceable Striking Pad
• 3/8” thru Holes for Mounting Flag(16” Centers)
• 3/8” Pins with Head(16” Center for Mini Flags)
• Fins to Prevent Rotation
• Tab Lock Style Double Wire Pin
• Extendable Flag Tube Overall Length100” Extended, 78” Retracted
• Weight 21 lbs.