Post on 04-Feb-2020
PolleyTechnical.com 12/7/17
D.N.- Please take out a piece of paper to write on and a pen or pencil ready.
AIM- How can you tell a machine what to do?
What do you do when the machine does not do what you want?
What is it called when you make changes?
An algorithm is a well-defined procedure that allows a computer to solve a problem. Another way to describe an
algorithm is a sequence of unambiguous instructions.
PolleyTechnical.com 12/12/17
D.N.- Turn in Autodesk sign off
Today chapter work and grades back.
Class vs. Class Challenge
Chap 2 Permission &Late work
Today-
Finish Chap 2
Update spreadsheet with Tinkercad username
If you have Tinkercad account run the 3d tutorials (learn)
If you do not have Tinkercad fix your old drawings or see me for 3d paper drawing exercise
PolleyTechnical.com 12/8/17
D.N.- Notes
AIM- What is CAD?
Hand in Tinkercad permission slipP6A Less than halfP7A Less than half
Computer Aided Design
The use of computers to design objects. CAD specific apps allow a designer to create an object that can be viewed 3 dimensionally. Additionally, some programs can run machines that will create the objects that were designed.
PolleyTechnical.com 12/14/17
D.N.- Notes
AIM- What are the basic components of a computer?
Hand in Tinkercad permission slipP6A Less than halfP7A Less than half
Input, Output, Processor, Memory
Mr. Polley Technology 7 12/15/17PolleyTechnical.com
Do Now- Pencil, sheet of paper, Drawings
Drawings will be graded as a group.
Mr. Polley will call your group up.
Please have your drawings ready.
Turn in Autodesk form, red folder
IF YOU RECEIVED A SCORE OF 14 OR LOWER YOU MUST REDO YOUR DRAWING
If you obtained a score of 15-18 you can do the 3rd block in the pack for more points
19-20 on both see Mr. Polley for instructions when he calls that group
Drawings have been returned.
Drawing questions will be answered 15 minutes into class.
Finish Chap 2
Update spreadsheet with Tinkercad username
If you have Tinkercad account run the 3d tutorials (click learn there are 6 tutorials)
If you do not have Tinkercad fix your old drawings or see me for 3d paper drawing exercise
PolleyTechnical.com 12/18/17
D.N.- Ready for notes
AIM- 3D models
Hand in Tinkercad permission slip
What does 3D mean?
What is the name of a 3d drawing?
What type of app can you use to create a 3d model?
PolleyTechnical.com 12/18/17
D.N.- Pick up a slip of paper from desk sketch an isometric of a cube.
AIM- Getting started with CAD
Hand in Tinkercad permission slip
CAD project rubricTutorials- 15 ptsNumber Cube- 25-30 ptsSnowman- 30 pointsDesk Organizer- 30 pointsExtra Credit- 5 pts 1"x1"x.25" initial 3d printed
Update spreadsheet with Tinkercad username
If you have Tinkercad account run the 3d tutorials (click learn there are 6 tutorials)
CAD project rubricTutorials- 15 ptsNumber Cube- 25-30 ptsSnowman- 30 pointsDesk Organizer- 30 pointsExtra Credit- 5 pts 1"x1"x.25" initial 3d printed
If you do not have Tinkercad permission slip see Mr. Polley.
-Learn /3D/L→R
T B
→
Tutorials- 15 pts
-Learn /3D/ L→R
T B
→
Numbered cube 25-30 pts.
Standard measurementCube 2"x2"x2" Numbers 1.25"h x 0.125"d Every side has a number 1-6 Numbers are centeredNumbers are colored (30 pt)
25 points
1) Create 2) Rename Click on name & change to Per # A/B # Cube
3) Change metric to standard
4) Box 5) Adjust dimensions Click on the black or white squares to have the lengths appear. Then click on number to change value.
4) Box
Width of the #1 is .5 inches Width of all other numbers is 1 inch
PolleyTechnical.com 1/3/18Happy New Year
Lets build a snowpersonSnowman- 30 points
D.N.- Get laptop log in, open Chrome & Tinkercad, place laptop lid to half closed
then wait quietly
Structure- 3 spheres, stacked no gaps, no taller than 6"
Arms- 2, attached to center, must be skinny
Head- face or head wear
Creative- Buttons, scarf, or accessories Questions?Due Date?
H.W. is on G.C. Due 1/11&12/18
PolleyTechnical.com 1/9/18
Tinkercad tutorials checked 1/8
# Cube checked 1/12-15
Desk Organizer checked 1/20
Should be done
Hw in G.C. due 1/12
D.N.- Get laptop log in, open Chrome & Tinkercad, place laptop lid to half closed
I have your chap 2 grades
Resubmits can be done next class & up until 1/25
PolleyTechnical.com 1/11/18
• Tinkercad tutorials checked 1/8• # Cube checked 1/12-15• Desk Organizer checked 1/20
Hw in G.C. due 1/12
D.N.- Get laptop log in, open Chrome & Tinkercad, place laptop lid to half closed. Then have pencil and paper ready for notes.
I have your chap 2 grades. See G.C. for point recovery.
Resubmits can be done next class & up until 1/25
Voc- Design brief has all the information a designer needs to understand the problem.
Resubs must be done in full for tutorials
• Tinkercad tutorials checked 1/8• # Cube checked 1/12-15• Desk Organizer checked 1/20
Desk Organizer Project-
Create a design brief of the Desk Organizer:• Problem Statement (the need you want to meet)• Specifications (size, what it should be able to do)
Then brainstorm sketch and gather info
Checking today
PolleyTechnical.com 1/16/18
• Tinkercad tutorials checked 1/8• # Cube checked 1/12-15• Submit Snowperson due 1/22• Desk Organizer checked 1/20 Due 1/25
Hw in G.C. due 1/12 P1B- 50% P2B- 5%
D.N.- Get laptop log in, open Chrome & Tinkercad, create new design titled Desk Organizer, place laptop lid to half closed. Quiet & listening.
Chap 2 grades will be posted this week in I.C.
Resubmits can be done after the lesson & up until 1/25 You can only resubmit Tinker Tutorials once
Tinkercad Number Cube & Snowman must be submitted via Google Classroom
PolleyTechnical.com 1/18/18
• Tinkercad tutorials checked 1/8 Rechecks next week• # Cube checked 1/12-15 • Submit Snowperson due 1/22• Desk Organizer checked 1/20 Due 1/25
D.N.- Get laptop log in, open Chrome & Tinkercad, open Desk Organizer, place laptop lid to half closed. Quiet & listening.
Chap 2 grades will be posted this week in I.C.
Resubmits can be done after the lesson & up until 1/25
You can only resubmit Tinker Tutorials once
Tinkercad Number Cube & Snowman must be submitted via Google Classroom
PolleyTechnical.com/cad.html 1/22/18
What are the 6 steps of the design process?Login, Tinkercad, GC close laptop, put info. below in your notes
• Tinkercad tutorials checked 1/8 Rechecks next week• # Cube checked 1/12-15 • Submit Snowperson due 1/22• Desk Organizer checked 1/20 Due 1/25
1. Identify the need2. Gather Information3. Develop Alternative Solutions4. Select the best solution5. Implement solution6. Evaluate solution
Work is due in G.C. Bring in ear buds
Extra help Tuesday and Wednesday PM
PolleyTechnical.com/cad.html 1/22/18
Login, Tinkercad, Finish your work
• Tinkercad tutorials checked 1/8 Rechecks next week• # Cube checked 1/12-15 • Submit Snowperson due 1/22• Desk Organizer checked 1/20 Due 1/25
Work is due in G.C. Bring in ear buds
WH Extra help Tuesday and Wednesday PMCW Extra help Thursday and Friday PM
PolleyTechnical.com/cad.html 1/23/18
What are the 6 steps of the design process?
What step are we in?
Do Now- Login, Tinkercad, GC close laptop, pick up slip of paper from desk, place your name & period on it, then answer the questions below-
Work is due in G.C. Bring in ear buds
Implement the solution
The "Just Do It" step• Tinkercad tutorials checked 1/8 Rechecks next week• # Cube checked 1/12-15 • Submit Snowperson due 1/22• Desk Organizer checked 1/20 Due 1/25
Extra help Tuesday and Wednesday PM
- 4 Universal pen & pencil nooks- Calculator slot- Cell Phone slot with charging access- Loose change, gum & paper clip jar- USB Key drive - 2 universal small item hooks (earbuds, hair ties)
Size limitations No larger than 8”w x 6”h x 4”dAesthetically pleasingSee Rubric for additional details
Desk Organizer
Basic Desk OrganizerSpecifications can be found at polleytechnical.com/cad.html
Simple wedge 4"h x 4"d x 8"w
• Edit grid & bed size > Inches> 8.5" x 8.5"
• Switch to 1/32• Wedge
When you are finished with the number cube share it through Google Classroom.
Have the design open click the share button in the right right of the screen.
Then click share with people.
1
2 3 Generate New Link
4 Copy Link
In Google Classroom open the assignment click on the link button
and paste your link by clicking pressing Command + V
P2A
P1A
1 2
3 4