Post on 16-Feb-2021
This electronic file (PDF) has embedded CVN technology (CVN-XML). The CVN technology of this file allows you to export and import curricular data from and
to any compatible data base. List of adapted databases available at: http://cvn.fecyt.es/
Fausto Pedro García MárquezGenerated from: Editor CVN de FECYTDate of document: 11/04/2018v 1.4.0817284cfb66f35df3ad0555ebda9ed7c
http://cvn.fecyt.es/
817284cfb66f35df3ad0555ebda9ed7c
2
Summary of CV
This section describes briefly a summary of your career in science, academic and research; themain scientific and technological achievements and goals in your line of research in the medium-and long- term. It also includes other important aspects or peculiarities.
Doctor Ingeniero Industrial por la Escuela Técnica Superior de Ingenieros Industriales(ETSII) de Ciudad Real de la Universidad de Castilla-La Mancha (UCLM), con mencióneuropea (marzo de 2004), Ingeniero Industrial por la ETSII de Cartagena (septiembre de1998), en la Universidad de Murcia, Ingeniero Técnico Industrial en la Escuela UniversitariaPolitécnica de Almadén (septiembre 1995), en la UCLM, y recientemente licenciado enAdministración y Dirección de Empresas en la Facultad de Derecho y Ciencias Socialesde Ciudad Real, UCLM (diciembre de 2006). Sus líneas principales de investigación sonreferentes a la investigación operativa, mantenimiento predictivo, monitorización remotabasada en la condición, el coste del ciclo de vida, etc. Ha sido premiado internacionalmentecon el Advancement Prize (2013) and Silver Prize (2012) by the International Society ofManagement Science and Engineering Management, así como el Advancement Prize enla Third International Conference on Management Science and Engineering Management.Actualmente trabaja a tiempo parcial como profesor Titular de Universiad en la UCLM,estando acreditado como Catedrático de Universidad, es Honorary Senior Research Fellowat Birmingham University, United Kingdom, y Senior Manager en Accenture. Es investigadorprincipal (IP) de 4 Proyectos Europeos: NIMO, INTERSOLAR, OPTIMUS (FP7) y WINPRO(Euroliga+4); 2 Nacionales, 4 Regionales, 1 como IP, y 3 proyectos de la UCLM, 1 comoIP. Ha llevado a cabo más de 100 contratos con la empresa, Art. 83, como director. Hapublicado más de 150 artículos (65 % en revistas ISI, 30% en revistas JCR and 83%internacionales), siendo principal autor en el 83%. Algunos de estos artículos han sidopremiados internacionalmente, p.e. “International Society of Management Science andEngineering Management” (as “excellent”), y “Int. J. of Automation and Computing” y “ IMechEPart F: Journal of Rail and Rapid Transit” (más leídos), etc. Han sido ya varios los premiosinternacionales los que ha recibido, destacando el Silver Prize otorgado por la InternationalSociety of Management Science and Engineering Management, además de poseer todas lasacreditaciones nacionales, incluida la de Catedrático de Universidad... Director de IngeniumResearch Group, un grupo de investigación multidisciplinar e internacional con ampliaexperiencia en proyectos nacionales e internacionales. Nuestra misión es contribuir ala mejora del bienestar social mediante la realización de proyectos a medida de lasorganizaciones en los ámbitos de la ingeniería, administración de empresas y economía, asícomo la búsqueda de la excelencia investigadora...
817284cfb66f35df3ad0555ebda9ed7c
3
General quality indicators of scientific research
This section describes briefly the main quality indicators of scientific production (periods ofresearch activity, experience in supervising doctoral theses, total citations, articles in journals ofthe first quartile, H index...). It also includes other important aspects or peculiarities.
(Datos actualizados a 02/2018)www.uclm.es/profesorado/faustoAcreditado Catedrático de Universidad en 2013H10-index 321660 referencias3 sexenios de investigaciónDireccion de 3 proyectos europeos, 5 nacionales, 1 regional, 42 para la universidad, y 131para empresas.43 artículos en el JCR, 24 en el primer cuartil Q180 trabajos presentados en conferencias internacionalesDirección de 4 tesis doctorales con mención internacional en los últimos 4 años4 patentes, 1 internacional146 artículos internacionales (entre ellos 23 libros)
Premios internacioles
First International Business Ideas Competition 2017 AwardHonorary Senior Research Fellow, University of Birmingham, 2011 -….Honorary Visiting Research Fellow, University of Birmingham 2005-2007Best Paper Award in the international journal of Renewable Energy (Impact Factor 3.5) in 2014 for the article “Condition monitoring of wind turbines: Techniques and methods”Runner-up Prize for Management Science and Engineering Management for the excellentpaper titled "Economic Viability Study for Offshore Wind Turbines Maintenance Management”International Society of Management Science and Engineering Management, 2015Advancement Prize for Management Science and Engineering Management for theexcellent paper titled "New Ranking Method Approach for Decision Making in MaintenanceManagement”International Society of Management Science and Engineering Management, 2013 SilverPrize for Management Science and Engineering Management for the excellent paper titled"Recurrent Neural Network and Genetic Algorithm Approaches for a Dual Route OptimizationProblem: A Real Case Study”,International Society of Management Science and Engineering Management, 2012 ISMSEMAdvancement Prize for MSEM for the excellent paper titled "Raildoad inspection employing aNon-Uniform B-Spline Approach",Second paper more downloaded entitled "Condition Monitoring of Wind Turbines: Techniquesand Methods" Authors: Fausto Pedro Garcia Marquez, Andrew Mark Tobias, MayorkinosPapaelias, and Jesús María Pinar Pérez, Renewable Energy, 2012
817284cfb66f35df3ad0555ebda9ed7c
4
Paper "Fausto Pedro García Márquez and Diego J. Pedregal. Applied RCM2 AlgorithmsBased on Statistical Methods." has been the most downloaded in the “International Journal ofAutomation and Computing”Paper "Fausto Pedro García Márquez, Clive Roberts and Andrew Mark Tobias. Railway PointMechanisms: Condition Monitoring and Fault Detection. " was one of the top five papersdownloaded from the journal “Proceedings of the IMechE Part F: Journal of Rail and RapidTransit” in 2010.
817284cfb66f35df3ad0555ebda9ed7c
5
Fausto Pedro García Márquez
Surname(s): García MárquezName: Fausto PedroDNI: 03864679NORCID: 0000-0002-9245-440XScopusID: 6603268567ResearcherID: D-7529-2011Scholar: https://scholar.google.es/citations?user=JXGOwl4AAAAJ&hl=esDate of birth: 29/01/1974Gender: MaleNationality: SpainCountry of birth: SpainAut. region/reg. of birth: Castile and LeónContact province: Ciudad RealCity of birth: Arenas de San PedroContact address: Escuela Técnica Superior de Ingenieros IndustrialesRest of contact address: Campus Universitario s/nPostcode: 13071Contact country: SpainContact aut. region/reg.: Castile-La ManchaContact city: Ciudad RealLand line phone: (+34) 926295300 - 6230Fax: (+34) 926295361Email: FaustoPedro.Garcia@uclm.esPersonal web page: http://www.uclm.es/profesorado/fausto
Current professional situation
Employing entity: Universidad de Castilla-La ManchaDepartment: Administración de Empresas, Escuela Técnica Superior de Ingenieros IndustrialesProfessional category: Titular de UniversidadStart date: 18/12/2009Type of contract: Civil servant Dedication regime: Full timePrimary (UNESCO code): 531107 - Operations researchSecondary (UNESCO code): 531109 - Organization of productionTertiary (UNESCO code): 531109 - Organization of productionPerformed tasks: Docencia e InvestigaciónIdentify key words: Scientific calculation; Maintenance of electrical power stations; Aeolian generation;Industrial enterprise
Previous positions and activities
Employing entity Professional category Start date1 Accenture Senior Manager 01/09/20132 University of Birmingham Honorary Senior Research Fellow 01/01/2012
817284cfb66f35df3ad0555ebda9ed7c
6
Employing entity Professional category Start date3 Universidad de Castilla-La Mancha Coordinador 4º curso de Ingeniería
Industrial27/01/2011
4 Universidad de Castilla-La Mancha Coordinador de Prácticas Externas 26/11/20125 Universidad de Castilla-La Mancha Director del curso de Operations
Management01/03/2013
6 Universidad de Castilla-La Mancha Equipo Directivo de Información yPromoción de la UCLM
01/01/2008
7 Universidad de Castilla-La Mancha Profesor Contratado Doctor 17/12/20078 Universidad de Castilla-La Mancha Responsable del programa Erasmus con
la Universidad de Birmingham (Inglaterra)01/08/2007
9 Universidad de Castilla-La Mancha Personal de Apoyo a la Investigación,Grupo A, Cuerpo Segunda-O-II
01/03/2007
10 University of Birmingham Honorary Visiting Research Fellow 01/01/200511 Universidad de Castilla-La Mancha Profesor Asociado Tipo 2 30/05/200712 Universidad de Castilla-La Mancha Ayudante 15/11/200313 Universidad de Castilla-La Mancha Miembro de la Comisión de Departamento
de Economía y Empresa05/03/2004
14 Universidad de Castilla-La Mancha Ayudante 04/02/200315 Universidad de Castilla-La Mancha Becario de Investigación 01/01/199916 Universidad de Murcia Becario de Colaboración 01/11/199817 Universidad de Murcia Alumno Interno 01/10/199618 Universidad de Castilla-La Mancha Director del Grupo de Investigación de
Ingeniería, Economía y Gestión- Ingenium01/01/2010
19 Universidad de Castilla-La Mancha Miembro de la Comisión de Departamentode Administración de Empresas
11/01/2006
1 Employing entity: Accenture Type of entity: BusinessProfessional category: Senior ManagerStart-End date: 01/09/2013 - 01/04/2018 Duration: 1 year
2 Employing entity: University of Birmingham Type of entity: UniversityDepartment: School of Mechanical Engineering within the College of Engineering and PhysicalSciencesCity employing entity: United KingdomProfessional category: Honorary SeniorResearch Fellow
Educational Management (Yes/No): Yes
Start-End date: 01/01/2012 - 31/12/2015 Duration: 4 yearsDedication regime: Part timePerformed tasks: Actividades relacionadas con la docencia, gestión e investigaciónField of management activity: University
3 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Escuela Técnica Superior de Ingenieros IndustrialesCity employing entity: SpainProfessional category: Coordinador 4º curso deIngeniería Industrial
Educational Management (Yes/No): Yes
Start-End date: 27/01/2011 - 27/01/2014 Duration: 3 yearsPerformed tasks: Coordinador 4º curso de Ingeniería IndustrialField of management activity: University
817284cfb66f35df3ad0555ebda9ed7c
7
4 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Escuela Técnica Superior de Ingenieros IndustrialesCity employing entity: SpainProfessional category: Coordinador de PrácticasExternas
Educational Management (Yes/No): Yes
Start-End date: 26/11/2012 - 26/11/2013 Duration: 1 yearPerformed tasks: Coordinador de Prácticas ExternasField of management activity: University
5 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Administración de Empresas, Escuela Técnica Superior de Ingenieros IndustrialesCity employing entity: SpainProfessional category: Director del curso deOperations Management
Educational Management (Yes/No): Yes
Start-End date: 01/03/2013 - 31/07/2013 Duration: 5 monthsPerformed tasks: Dirección y Gestión del curso Operations Management, curso semipresencial de 5créditos ECTS
6 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Vicerrectorado de DocenciaCity employing entity: SpainProfessional category: Equipo Directivo deInformación y Promoción de la UCLM
Educational Management (Yes/No): Yes
Start-End date: 01/01/2008 - 31/12/2011 Duration: 4 yearsPerformed tasks: Participación en el Vicerrectorado de Estudiantes de la Universidad de Castilla-LaMancha (UCLM) de las campañas de Información y Promoción de la UCLMField of management activity: University
7 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: Profesor Contratado DoctorStart-End date: 17/12/2007 - 18/12/2009 Duration: 2 years - 1 day
8 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Oficina de Relaciones Internacionales, Escuela Técnica Superior de IngenierosIndustrialesCity employing entity: SpainProfessional category: Responsable delprograma Erasmus con la Universidad deBirmingham (Inglaterra)
Educational Management (Yes/No): Yes
Start-End date: 01/08/2007 - 20/08/2008 Duration: 1 year - 20 daysType of contract: Civil servantDedication regime: Part timeField of management activity: University
9
817284cfb66f35df3ad0555ebda9ed7c
8
Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: Personal de Apoyo a la Investigación, Grupo A, Cuerpo Segunda-O-IIStart-End date: 01/03/2007 - 31/12/2007 Duration: 8 months
10 Employing entity: University of Birmingham Type of entity: UniversityDepartment: School of Mechanical Engineering within the College of Engineering and PhysicalSciencesCity employing entity: United KingdomProfessional category: Honorary VisitingResearch Fellow
Educational Management (Yes/No): Yes
Start-End date: 01/01/2005 - 31/12/2007 Duration: 3 yearsDedication regime: Part timePerformed tasks: Actividades relacionadas con la docencia, gestión e investigaciónField of management activity: University
11 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: Profesor Asociado Tipo 2Start-End date: 30/05/2007 - 30/09/2007 Duration: 4 months
12 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: AyudanteStart-End date: 15/11/2003 - 30/05/2007 Duration: 4 years - 5 months - 15
days
13 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Departamento de Economía y Empresa, Escuela Técnica Superior de IngenierosIndustrialesCity employing entity: Castile-La Mancha, SpainProfessional category: Miembro de la Comisiónde Departamento de Economía y Empresa
Educational Management (Yes/No): Yes
Start-End date: 05/03/2004 - 11/01/2006 Duration: 1 year - 9 monthsField of management activity: University
14 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: AyudanteStart-End date: 04/02/2003 - 15/11/2003 Duration: 9 months - 11 days
15 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Professional category: Becario de InvestigaciónStart-End date: 01/01/1999 - 31/12/2002 Duration: 4 years
16 Employing entity: Universidad de Murcia Type of entity: UniversityProfessional category: Becario de ColaboraciónStart-End date: 01/11/1998 - 30/06/1999 Duration: 9 months
817284cfb66f35df3ad0555ebda9ed7c
9
17 Employing entity: Universidad de Murcia Type of entity: UniversityProfessional category: Alumno InternoStart-End date: 01/10/1996 - 30/06/1997 Duration: 9 months
18 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Vicerrectorado de InvestigaciónCity employing entity: SpainProfessional category: Director del Grupo de Investigación de Ingeniería, Economía y Gestión-IngeniumStart date: 01/01/2010Dedication regime: Part timePerformed tasks: Dirección y Administración del Grupo de Investigación Ingenium, grupomultidisciplinar formado por nueve miembros pertenecientes a la (UCLM) y trece miembros deinstituciones nacionales (Universidades de Sevilla, Politécnica de Cataluña, Colegio Universitariode Estudios Financieros, Banco de España, RENFE, y Novotec consultores), e internacionales(Universidades de Lancaster y Birmingham en el Reino Unido y la Universidad de Bergamo en Italia).
19 Employing entity: Universidad de Castilla-LaMancha
Type of entity: University
Department: Departamento de Administración de Empresas, Escuela Técnica Superior deIngenieros IndustrialesCity employing entity: Castile-La Mancha, SpainProfessional category: Miembro de la Comisiónde Departamento de Administración de Empresas
Educational Management (Yes/No): Yes
Start date: 11/01/2006Field of management activity: University
817284cfb66f35df3ad0555ebda9ed7c
10
Education
University education
1st and 2nd cycle studies and pre-Bologna degrees
1 University degree: Higher degreeName of qualification: Licenciado en Administración y Dirección de Empresas Especialidad AuditoríaDegree awarding entity: Universidad de Castilla-LaMancha
Type of entity: University
Date of qualification: 13/12/2006
2 University degree: Higher degreeName of qualification: Ingeniero IndustrialDegree awarding entity: Universidad de Murcia Type of entity: UniversityDate of qualification: 24/01/1998
3 University degree: Middle degreeName of qualification: Ingeniero Técnico IndustrialDegree awarding entity: Universidad de Castilla-LaMancha
Type of entity: University
Date of qualification: 22/09/1995
Doctorates
Doctorate programme: Doctor Ingeniero Industrial (Mención Europea)Degree awarding entity: Universidad de Castilla-LaMancha
Type of entity: University
Date of degree: 04/03/2004European doctorate: Yes Date of certificate: 04/03/2004Thesis title: Desarrollo de Nuevos Algoritmos Aplicados al Mantenimiento Predictivo Óptimo Centrado en laFiabilidad y Monitorización Remota Basada en la Condición (RCM2)Thesis director: Diego José Pedregal TerceroThesis co-director: Felix SchmidObtained qualification: Sobresaliente cum laude
Other postgraduate university studies
1 Postgraduate qualification: Especialista en Transportes TerrestresDegree awarding entity: Universidad Politécnica deMadrid
Type of entity: University
Faculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDate of qualification: 05/12/2001
817284cfb66f35df3ad0555ebda9ed7c
11
2 Postgraduate qualification: Técnico Superior de Prevención de Riesgos LaboralesDegree awarding entity: Universidad de Castilla-LaMancha
Type of entity: University
Faculty, institute or centre: Facultad de Ciencias Jurídicas y Sociales de Ciudad RealDate of qualification: 13/07/2000
Specialised, lifelong, technical, professional and refresher training (other than formalacademic and healthcare studies)
1 Type of training: CourseTraining title: Otras Aplicaciones NuclearesCity awarding entity: SpainAwarding entity: Foro Nuclear Type of entity: FoundationEnd date: 01/06/2002 Duration in hours: 10 hours
2 Type of training: CourseTraining title: Curso General de Transportes TerrestresCity awarding entity: SpainAwarding entity: Federación de Ferrocarriles Españoles(FFE) y la Universidad Politécnica de Madrid
Type of entity: University
End date: 2001 Duration in hours: 250 hours
3 Type of training: CourseTraining title: Oral SkillCity awarding entity: United KingdomAwarding entity: University Of Sheffield (England)End date: 08/10/2000 Duration in hours: 15 hours
4 Type of training: CourseTraining title: PronuntationCity awarding entity: United KingdomAwarding entity: University Of Sheffield (England)End date: 08/10/2000 Duration in hours: 15 hours
5 Type of training: CourseTraining title: Marketing InternacionalCity awarding entity: PeruAwarding entity: Universidad Nacional de Piura (Perú)End date: 23/08/1999 Duration in hours: 40 hours
6 Type of training: CourseTraining title: Gestión Empresarial MultimediaCity awarding entity: SpainAwarding entity: Federación de Empresarios Toledanos Type of entity: Fundación EmpresarialEnd date: 1999 Duration in hours: 500 hours
7 Type of training: CourseTraining title: Cemento - Hormigón. Aplicaciones, Patologías y ReparaciónCity awarding entity: SpainAwarding entity: Universidad de Murcia Type of entity: University
817284cfb66f35df3ad0555ebda9ed7c
12
End date: 13/03/1998 Duration in hours: 35 hours
8 Type of training: CourseTraining title: Cartagena. Frontera Regional de DesarrolloCity awarding entity: SpainAwarding entity: Conferencia Comarcal de Organizaciones Empresariales de Cartagena, Cartagena (Murcia)End date: 20/02/1998
9 Type of training: CourseTraining title: IV Curso Internacional de Modelización Aplicada al Medio Ambiente. Modelos de ReceptorCity awarding entity: SpainAwarding entity: Universidad de Murcia Type of entity: UniversityEnd date: 30/01/1998 Duration in hours: 33 hours
10 Type of training: CourseTraining title: La Seguridad Industrial en el Mercado ÚnicoCity awarding entity: SpainAwarding entity: Universidad de Murcia Type of entity: UniversityEnd date: 01/11/1997
11 Type of training: CourseTraining title: Métodos TopográficosCity awarding entity: SpainAwarding entity: Universidad de Murcia, Cartagena(Murcia)
Type of entity: University
End date: 06/03/1997 Duration in hours: 35 hours
12 Type of training: CourseTraining title: III Curso Internacional de Modelización Aplicada al Medio Ambiente: Modelización Aplicada aAguas SuperficialesCity awarding entity: SpainAwarding entity: Universidad de Murcia, Cartagena(Murcia)
Type of entity: University
End date: 21/02/1997 Duration in hours: 35 hours
13 Type of training: CourseTraining title: Energía y SociedadCity awarding entity: SpainAwarding entity: Foro Nuclear, Madrid Type of entity: FundaciónEnd date: 1997 Duration in hours: 10 hours
14 Type of training: CourseTraining title: La Nueva Cultura EmpresarialCity awarding entity: SpainAwarding entity: Confederación Regional de Organizaciones Empresariales de Murcia, Cartagena (Murcia)End date: 1997
15 Type of training: CourseTraining title: Aseguramiento de la Calidad, Según ISO 9000City awarding entity: SpainAwarding entity: Cehegín (Murcia)
817284cfb66f35df3ad0555ebda9ed7c
13
End date: 05/12/1996 Duration in hours: 15 hours
16 Type of training: CourseTraining title: Gestión EmpresarialCity awarding entity: ColombiaAwarding entity: Universidad de Antioquia, Medellín(Colombia)
Type of entity: University
End date: 28/09/1996
17 Type of training: CourseTraining title: Uso y Manejo de InternetCity awarding entity: ColombiaAwarding entity: Universidad de Antioquia, Medellín(Colombia)
Type of entity: University
End date: 09/08/1996
18 Type of training: CourseTraining title: Autómatas ProgramablesCity awarding entity: SpainAwarding entity: Universidad de Murcia Type of entity: UniversityEnd date: 30/05/1996 Duration in hours: 18 hours
19 Type of training: CourseTraining title: Primer Encuentro Latinoamericano y Quinto Nacional de Estudiantes de Ingeniería Eléctrica yElectrónicaCity awarding entity: ColombiaAwarding entity: Universidad de Antioquia Type of entity: UniversityEnd date: 1996 Duration in hours: 50 hours
20 Type of training: CourseTraining title: II Curso Internacional de Modelización Aplicada al Medio Ambiente: Fenómenos AtmosféricosCity awarding entity: SpainAwarding entity: Universidad de Murcia Type of entity: UniversityEnd date: 15/12/1995 Duration in hours: 35 hours
21 Type of training: CourseTraining title: XII Jornadas Nacionales Sobre Energía y Educación: La Energía y el Cambio ClimáticoCity awarding entity: SpainAwarding entity: Forum Atómico Español Type of entity: FundaciónEnd date: 23/09/1995 Duration in hours: 15 hours
22 Type of training: CourseTraining title: VIII Semana Industrial y MineraCity awarding entity: SpainAwarding entity: Universidad de Castill-La ManchaEnd date: 05/04/1995 Duration in hours: 12 hours
23 Type of training: CourseTraining title: Aparamenta EléctricaCity awarding entity: SpainAwarding entity: Universidad de Castilla-La Mancha Type of entity: University
817284cfb66f35df3ad0555ebda9ed7c
14
End date: 13/12/1994
24 Type of training: CourseTraining title: Ciencias EnergéticasCity awarding entity: SpainAwarding entity: Forum Atómico Español Type of entity: FoundationEnd date: 1994 Duration in hours: 13 hours
25 Type of training: CourseTraining title: Energía Sociedad y Medio AmbienteCity awarding entity: SpainAwarding entity: Forum Atómico Español Type of entity: FoundationEnd date: 1994 Duration in hours: 40 hours
26 Type of training: CourseTraining title: Energía y SociedadCity awarding entity: SpainAwarding entity: Forum Atómico Español Type of entity: FoundationEnd date: 1994 Duration in hours: 13 hours
27 Type of training: CourseTraining title: Residuos RadiactivosCity awarding entity: SpainAwarding entity: Forum Atómico Español Type of entity: FoundationEnd date: 1994 Duration in hours: 13 hours
28 Type of training: CourseTraining title: Hoja de Cálculo Lotus 1-2-3City awarding entity: SpainAwarding entity: Cámara Oficial de Comercio deToledo, Toledo
Type of entity: Associations and Groups
End date: 29/07/1993 Duration in hours: 25 hours
29 Type of training: CourseTraining title: Procesador de Textos Word PerfectCity awarding entity: SpainAwarding entity: Cámara Oficial de Comercio eIndustria de Toledo
Type of entity: Associations and Groups
End date: 18/06/1993 Duration in hours: 25 hours
30 Type of training: CourseTraining title: Interlink School of EnglishCity awarding entity: United KingdomAwarding entity: Bournemouth (Inglaterra) Type of entity: Associations and GroupsEnd date: 02/08/1991
817284cfb66f35df3ad0555ebda9ed7c
15
Attended advanced, improvement and innovative teacher training and new technologycourses and seminars focused on improving teaching
1 Title of course/seminar: Diplomado en Ambientes Virtuales de AprendizajeGoals of the course/seminar: Proporcionar a sus docentes, las herramientas tecnológicas, metodológicasy pedagógicas para requeridas para el desempeño de su actividad académica que le permitan poner enfuncionamiento y potenciar el modelo pedagógico de la Institución.Organising entity: Corporación Universitaria Asturias Type of entity: Associations and GroupsDuration in hours: 120 hoursStart-End date: 15/11/2017 - 15/04/2008
2 Title of course/seminar: XIV Jornadas Nacionales Sobre Energía y Educación: “La Integración EconómicaEuropea”Goals of the course/seminar: La Energía y La Integración Económica EuropeaCity organizing entity: SpainOrganising entity: Forum Atómico Español Type of entity: Associations and GroupsDuration in hours: 15 hoursStart-End date: 15/07/1997 - 27/09/1997
3 Title of course/seminar: XI Jornadas Nacionales Sobre Energía y Educación: “La Energía en la Unión Europea”Goals of the course/seminar: La Energía en la Unión EuropeaCity organizing entity: SpainOrganising entity: Forum Atómico Español Type of entity: FoundationDuration in hours: 15 hoursStart-End date: 22/09/1994 - 24/09/1994
Language skills
Language Listening skills Reading skills Spoken interaction Speaking skills Writing skillsFrench A2 A2 A2 A2 A2English C2 C2 C2 C2 C2
Teaching experience
General teaching experience
1 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2018 End date: 31/01/2018End date: 31/01/2018 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: University
817284cfb66f35df3ad0555ebda9ed7c
16
Faculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
2 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2017 End date: 31/01/2018End date: 31/01/2018 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
3 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2017 End date: 31/01/2018End date: 31/01/2018 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
4 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA Especialidad en FinanzasCourse given: PrimeroStart date: 28/10/2017 End date: 28/12/2017End date: 28/12/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
5 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: Virtual
817284cfb66f35df3ad0555ebda9ed7c
17
Type of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 28/10/2017 End date: 28/12/2017End date: 28/12/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
6 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Supply Chain Management and LogisticsCourse given: PrimeroStart date: 28/10/2017 End date: 28/12/2017End date: 28/12/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
7 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA Especialidad en FinanzasCourse given: PrimeroStart date: 06/04/2017 End date: 06/06/2017End date: 06/06/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
8 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 06/04/2017 End date: 06/06/2017End date: 06/06/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
18
9 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA Especialidad en FinanzasCourse given: PrimeroStart date: 16/02/2017 End date: 16/04/2017End date: 16/04/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
10 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 16/02/2017 End date: 16/04/2017End date: 16/04/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
11 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección de EmpresasCourse given: PrimeroStart date: 16/02/2017 End date: 16/04/2017End date: 16/04/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
12 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Supply Chain Management and LogisticsCourse given: PrimeroStart date: 16/02/2017 End date: 16/04/2017End date: 16/04/2017 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
19
13 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2017 End date: 31/01/2017End date: 31/01/2017 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
14 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2016 End date: 31/01/2017End date: 31/01/2017 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
15 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2016 End date: 31/01/2017End date: 31/01/2017 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
16 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA Especialidad en Finanzas
817284cfb66f35df3ad0555ebda9ed7c
20
Course given: PrimeroStart date: 25/10/2016 End date: 25/10/2016End date: 25/10/2016 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
17 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 25/10/2016 End date: 25/10/2016End date: 25/10/2016 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
18 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 25/10/2016 End date: 25/10/2016End date: 25/10/2016 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
19 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección de EmpresasCourse given: PrimeroStart date: 25/10/2016 End date: 25/10/2016End date: 25/10/2016 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
20 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: Obligatory
817284cfb66f35df3ad0555ebda9ed7c
21
University degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 18/02/2016 End date: 18/02/2016End date: 18/04/2016 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
21 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2015 End date: 31/01/2016End date: 31/01/2016 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
22 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2015 End date: 31/01/2016End date: 31/01/2016 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
23 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2015 End date: 31/01/2016End date: 31/01/2016 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de Empresas
817284cfb66f35df3ad0555ebda9ed7c
22
City of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
24 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA Especialidad en FinanzasCourse given: PrimeroStart date: 25/06/2015 End date: 25/08/2015End date: 25/08/2015 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
25 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 25/06/2015 End date: 25/08/2015End date: 25/08/2015 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
26 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: Máster en Dirección de EmpresasCourse given: PrimeroStart date: 25/06/2015 End date: 25/08/2015End date: 25/08/2015 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
27 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería Electrónica Industrial y AutomáticaCourse given: SegundoStart date: 31/01/2015 End date: 31/07/2015End date: 31/07/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60
817284cfb66f35df3ad0555ebda9ed7c
23
Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
28 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería MecánicaCourse given: SegundoStart date: 31/01/2015 End date: 31/07/2015End date: 31/07/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
29 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 15/01/2015 End date: 15/03/2015End date: 15/03/2015 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
30 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 15/01/2015 End date: 15/02/2015End date: 15/02/2015 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
31 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: Obligatory
817284cfb66f35df3ad0555ebda9ed7c
24
University degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2015 End date: 31/01/2015End date: 31/01/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
32 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería EléctricaCourse given: SegundoStart date: 01/09/2014 End date: 31/01/2015End date: 31/01/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
33 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2014 End date: 31/01/2015End date: 31/01/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
34 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2014 End date: 31/01/2015End date: 31/01/2015 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: University
817284cfb66f35df3ad0555ebda9ed7c
25
Faculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
35 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 04/09/2014 End date: 04/11/2014End date: 04/11/3014 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
36 Type of teaching: International teachingName of the course: Gestión de los procesosType of programme: Master’s degree Type of teaching: VirtualType of subject: ObligatoryUniversity degree: MBA en Dirección GeneralCourse given: PrimeroStart date: 04/09/2014 End date: 04/11/2014End date: 04/11/2014 Type of hours/ ECTS credits: HoursHours/ECTS credits: 12Entity: Instituto Europeo de Posgrado Type of entity: BusinessFaculty, institute or centre: Instituto Europeo de PosgradoSubject language: Spanish
37 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería Electrónica Industrial y AutomáticaCourse given: SegundoStart date: 31/01/2014 End date: 31/07/2014End date: 31/07/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
38 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería Electrónica Industrial y Automática
817284cfb66f35df3ad0555ebda9ed7c
26
Course given: SegundoStart date: 31/01/2014 End date: 31/07/2014End date: 31/07/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
39 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería MecánicaCourse given: SegundoStart date: 31/01/2014 End date: 31/07/2014End date: 31/07/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
40 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería EléctricaCourse given: SegundoStart date: 01/09/2013 End date: 31/01/2014End date: 31/01/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
41 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2013 End date: 31/01/2014End date: 31/01/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros Industriales
817284cfb66f35df3ad0555ebda9ed7c
27
Department: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
42 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2013 End date: 31/01/2014End date: 31/01/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
43 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2013 End date: 31/01/2014End date: 31/01/2014 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
44 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería Electrónica Industrial y AutomáticaCourse given: SegundoStart date: 31/01/2013 End date: 31/07/2013End date: 31/07/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
28
45 Type of teaching: Official teachingName of the course: Gestión de la Calidad TotalType of programme: Bachelor’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Gestión Aeronáutica y AeroportuariaCourse given: CuartoStart date: 31/01/2013 End date: 31/07/2013End date: 31/07/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Facultad de Ciencias Sociales y Jurídicas de Ciudad RealDepartment: Administración de EmpresasCity of entity: Puertollano, Castile-La Mancha, SpainSubject language: Spanish
46 Type of teaching: Official teachingName of the course: Estrategia y Política de EmpresaType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
47 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería EléctricaCourse given: SegundoStart date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
48 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: Tercero
817284cfb66f35df3ad0555ebda9ed7c
29
Start date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
49 Type of teaching: Official teachingName of the course: Dirección de Empresas (Español)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
50 Type of teaching: Official teachingName of the course: Dirección de Empresas (Inglés)Type of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 59Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
51 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Master’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Master Universitario en Ingeniería IndustrialCourse given: SegundoStart date: 01/09/2012 End date: 31/01/2013End date: 31/01/2013 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de Empresas
817284cfb66f35df3ad0555ebda9ed7c
30
City of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
52 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería Electrónica Industrial y AutomáticaCourse given: SegundoStart date: 31/01/2012 End date: 31/07/2012End date: 31/07/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
53 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería EléctricaCourse given: SegundoStart date: 31/01/2012 End date: 31/07/2012End date: 31/07/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
54 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería MecánicaCourse given: SegundoStart date: 31/01/2012 End date: 31/07/2012End date: 31/07/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
55 Type of teaching: Official teachingName of the course: Gestión de la Calidad TotalType of programme: Bachelor’s degree Type of teaching: In person theory
817284cfb66f35df3ad0555ebda9ed7c
31
Type of subject: ObligatoryUniversity degree: Gestión Aeronáutica y AeroportuariaCourse given: CuartoStart date: 31/01/2012 End date: 31/07/2012End date: 31/07/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Facultad de Ciencias Sociales y Jurídicas de Ciudad RealDepartment: Administración de EmpresasCity of entity: Puertollano, Castile-La Mancha, SpainSubject language: Spanish
56 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2011 End date: 31/01/2012End date: 31/01/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
57 Type of teaching: Official teachingName of the course: Gestión EmpresarialType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Grado de Ingeniería EléctricaCourse given: SegundoStart date: 01/09/2011 End date: 31/01/2012End date: 31/01/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
58 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2011 End date: 31/01/2012End date: 31/01/2012 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60
817284cfb66f35df3ad0555ebda9ed7c
32
Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
59 Type of teaching: Official teachingName of the course: Gestión de la Calidad TotalType of programme: Bachelor’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Gestión Aeronáutica y AeroportuariaCourse given: CuartoStart date: 31/01/2011 End date: 31/07/2011End date: 31/07/2011 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Facultad de Ciencias Sociales y Jurídicas de Ciudad RealDepartment: Administración de EmpresasCity of entity: Puertollano, Castile-La Mancha, SpainSubject language: Spanish
60 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2010 End date: 31/01/2011End date: 31/01/2011 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
61 Type of teaching: Official teachingName of the course: Introducción a la Producción IndustrialType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/2010 End date: 31/01/2011End date: 31/01/2011 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
33
62 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2010 End date: 31/01/2011End date: 31/01/2011 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
63 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2010 End date: 31/01/2011End date: 31/01/2011 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
64 Type of teaching: Official teachingName of the course: Gestión de la Calidad TotalType of programme: Bachelor’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Gestión Aeronáutica y AeroportuariaCourse given: CuartoStart date: 31/01/2010 End date: 31/07/2010End date: 31/07/2010 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Facultad de Ciencias Sociales y Jurídicas de Ciudad RealDepartment: Administración de EmpresasCity of entity: Puertollano, Castile-La Mancha, SpainSubject language: Spanish
65 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: Quinto
817284cfb66f35df3ad0555ebda9ed7c
34
Start date: 01/09/2009 End date: 31/01/2010End date: 31/01/2010 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
66 Type of teaching: Official teachingName of the course: Introducción a la Producción IndustrialType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/2009 End date: 31/01/2010End date: 31/01/2010 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
67 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2009 End date: 31/01/2010End date: 31/01/2010 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
68 Type of teaching: Official teachingName of the course: Gestión de la Calidad TotalType of programme: Bachelor’s degree Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Gestión Aeronáutica y AeroportuariaCourse given: CuartoStart date: 31/01/2009 End date: 31/07/2009End date: 31/07/2009 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 30Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Facultad de Ciencias Sociales y Jurídicas de Ciudad RealDepartment: Administración de Empresas
817284cfb66f35df3ad0555ebda9ed7c
35
City of entity: Puertollano, Castile-La Mancha, SpainSubject language: Spanish
69 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2008 End date: 31/01/2009End date: 31/01/2009 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
70 Type of teaching: Official teachingName of the course: Introducción a la Producción IndustrialType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/2008 End date: 31/01/2009End date: 31/01/2009 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 45Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
71 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2008 End date: 31/01/2009End date: 31/01/2009 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
72 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theory
817284cfb66f35df3ad0555ebda9ed7c
36
Type of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2007 End date: 31/01/2008End date: 31/01/2008 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
73 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2007 End date: 31/01/2008End date: 31/01/2008 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
74 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: CuartoStart date: 01/02/2007 End date: 31/07/2007End date: 31/07/2007 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
75 Type of teaching: International teachingName of the course: Discrete SimulationType of programme: Bachelor’s degree Type of teaching: Laboratory workType of subject: CoreUniversity degree: Mechanical EngineeringStart date: 01/02/2007 End date: 30/04/2007End date: 30/04/2007 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 4Entity: University of Birmingham, Reino Unido Type of entity: University
817284cfb66f35df3ad0555ebda9ed7c
37
Faculty, institute or centre: Mechanical EngineeringDepartment: MathematicsCity of entity: Birmingham, United KingdomSubject language: English
76 Type of teaching: International teachingName of the course: Graph Theory and Computer SimulationType of programme: Master’s degree Type of teaching: Laboratory workType of subject: CoreUniversity degree: Mechanical EngineeringCourse given: 1Start date: 01/02/2007 End date: 30/04/2007End date: 30/04/2007 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 4Entity: University of Birmingham, Reino Unido Type of entity: UniversityFaculty, institute or centre: Mechanical EngineeringCity of entity: Birmingham, United KingdomSubject language: English
77 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: CuartoStart date: 01/02/2005 End date: 31/07/2005End date: 31/07/2005 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
78 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2005 End date: 31/01/2005End date: 31/01/2005 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
38
79 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2005 End date: 31/01/2005End date: 31/01/2005 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
80 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: CuartoStart date: 01/02/2004 End date: 31/07/2004End date: 31/07/2004 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
81 Type of teaching: Official teachingName of the course: Administración y Dirección de EmpresasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: QuintoStart date: 01/09/2003 End date: 31/01/2004End date: 31/01/2004 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
82 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: Tercero
817284cfb66f35df3ad0555ebda9ed7c
39
Start date: 01/09/2003 End date: 31/01/2004End date: 31/01/2004 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
83 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2003 End date: 31/01/2004End date: 31/01/2004 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
84 Type of teaching: Official teachingName of the course: Diseño de Sistemas de Producción y LogísticaType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: CuartoStart date: 01/02/2003 End date: 31/07/2003End date: 31/07/2003 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
85 Type of teaching: Official teachingName of the course: Métodos Estadísticos de la IngenieríaType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/2002 End date: 31/07/2003End date: 31/07/2003 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 120Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de Empresas
817284cfb66f35df3ad0555ebda9ed7c
40
City of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
86 Type of teaching: Official teachingName of the course: Organización de la ProducciónType of programme: Engineering Type of teaching: In person theoryType of subject: OptionalUniversity degree: Ingeniero IndustrialCourse given: TerceroStart date: 01/09/2002 End date: 31/01/2003End date: 31/01/2003 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
87 Type of teaching: Official teachingName of the course: Métodos Estadísticos IType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/1999 End date: 31/01/2000End date: 31/01/2000 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
88 Type of teaching: Official teachingName of the course: Métodos Estadísticos IIType of programme: Engineering Type of teaching: In person theoryType of subject: ObligatoryUniversity degree: Ingeniero IndustrialCourse given: SegundoStart date: 01/09/1999 End date: 31/01/2000End date: 31/01/2000 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
89 Type of teaching: Official teachingName of the course: Economía y Gestión de la Empresa AlimentariaType of programme: Bachelor’s degree Type of teaching: In person theory
817284cfb66f35df3ad0555ebda9ed7c
41
Type of subject: CoreUniversity degree: Facultad Ciencias QuímicasCourse given: SegundoStart date: 01/09/1999 End date: 31/01/2000End date: 31/01/2000 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Castilla-La Mancha Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: Administración de EmpresasCity of entity: Ciudad Real, Castile-La Mancha, SpainSubject language: Spanish
90 Type of teaching: Official teachingName of the course: Tecnología MecánicaType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniería Técnica IndustrialCourse given: SegundoStart date: 01/09/1997 End date: 31/01/1998End date: 31/01/1998 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Murcia Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: MatemáticasCity of entity: Cartagena, Region of Murcia, SpainSubject language: Spanish
91 Type of teaching: Official teachingName of the course: Complementos de matemáticasType of programme: Engineering Type of teaching: In person theoryType of subject: CoreUniversity degree: Ingeniería IndustrialCourse given: SegundoStart date: 01/09/1995 End date: 31/01/1996End date: 31/01/1996 Type of hours/ ECTS credits: CreditsHours/ECTS credits: 60Entity: Universidad de Murcia Type of entity: UniversityFaculty, institute or centre: Escuela Técnica Superior de Ingenieros IndustrialesDepartment: MatemáticasCity of entity: Cartagena, Region of Murcia, SpainSubject language: Spanish
817284cfb66f35df3ad0555ebda9ed7c
42
Experience supervising doctoral thesis and/or final year projects
1 Project title: Principales factores de acumulación de suciedad en paneles fotovoltáicos y su influencia en elrendimiento de dos plantas fotovoltáicasType of project: Minor thesisEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: David Martín García De La TorreObtained qualification: 8.33Date of reading: 03/10/2017
2 Project title: Sistema de monitorización de plantas solares con sensores radiométrico y termográfico embarcadosen un vehículo aéreo no tripuladoType of project: Minor thesisEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Coral García Velasco Gómez CambroneroObtained qualification: Matrícula de HonorDate of reading: 07/06/2017
3 Project title: Estación de Repostaje (CAES)Type of project: End of course projectEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Emilio Jaime Sanchez GonzalezObtained qualification: 7.8Date of reading: 22/12/2016
4 Project title: Nuevo sensor radiamétrico embarcado en una aeronave no tripuladaType of project: End of course projectEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Alfredo Peinado onzalezObtained qualification: 7Date of reading: 29/09/2016
5 Project title: Métodos de análisis multivariable para diagnóstico y mantenimiento predictivo de parques eólicosType of project: End of course projectEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Carlos Javier Martín López ReyObtained qualification: 7Date of reading: 28/09/2016
6 Project title: Approaches for Quantitative and Qualitative Analysis of Complex Systems: algorithms and casestudiesType of project: Doctoral thesisEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, Spain
817284cfb66f35df3ad0555ebda9ed7c
43
Student: Alberto Pliego MarugánObtained qualification: Cum LaudeDate of reading: 15/07/2016European doctorate: Yes Date of recognition: 15/07/2016Quality recognition: Yes Date of award: 15/07/2016
7 Project title: Detection and Diagnosis for Structures Maintenance ManagementType of project: Doctoral thesisEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Carlos Quiterio Gómez MuñozObtained qualification: Cum LaudeDate of reading: 15/07/2016European doctorate: Yes Date of recognition: 15/07/2016Quality recognition: Yes Date of award: 15/07/2016
8 Project title: Sistema de monitorización de la estructura de concentradores solares empleando ultrasonidosType of project: End of course projectEntity: Universidad de Castilla-La Mancha Type of entity: UniversityCity of entity: Ciudad Real, Castile-La Mancha, SpainStudent: Pedro Cañamero MolinaObtained qualification: 7Date of reading: 29/06/2016
9 Project title: Análisis del estado de palas de un aerogenerador mediante el uso de redes neuronalesType of project: End of course projectEntity: Universidad de Castill