AP238-PS29/PS31 Manual (Heat Sensitive)

Post on 08-Apr-2015

228 views 3 download

description

AirPRO 238 Professional Series PS29/PS31 Installation Guide and Users Manual

Transcript of AP238-PS29/PS31 Manual (Heat Sensitive)

Installation Guide and Users Manual

Wall Mount Range Hood

AirPRO 238 Professional Series (PS29/PS31)

IMPORTANT:Read and save these instructions.NOTICE:Installer: Leave this guide with the homeownerHomeowner: Keep this guide for future reference

Rev. 3065u.2b

Important Safety NoticeRead all Instructions before Installing and operating this appliance

-

DO NOT

DO NOT -pors.

-

sure to vent air outside. DO NOTor garages.

-den utilities.

vendor.

Important Safety NoticeRead all Instructions before Installing and operating this appliance

WARNING-

-

what can happen if the instructions are not followed.

The manufacturer and/or distributor/reseller declines all responsibility in the event of failure to ob-serve the instructions given here for installation, maintenance and suitable use of the product. The manufacturer and/or distributor/reseller further declines all responsibility for injury due to neg-ligence and the warranty of the unit automatically expires due to improper maintenance.The manufacturer and/or distributor/reseller will not be held responsible for any damages to per-sonal property or real estate or any bodily injuries whether caused directly or indirectly by the range hood.

Table of Contents

INSTALLATIONTools needed....................................................3

USE AND CARE

MAINTENANCE

WARRANTY

Tools needed:

Level

screwdriversscrewdriver or drill

Measuring tape

pencil

Parts supplied:

Range Hood

Venting Requirements Height & Clearance

-tic or other enclosed area.

caps.

aluminum vent is recommended.DO NOT use plastic vent.

-

1. 2. -

tertop/stove (recommend* 27” to 30”).3. Distance between the countertop/stove

4.

hood.

-

hood.

opening around the cap.

-

Upper

Range hood

mounting

Lower

-

IMPORTANT:-

duct.

and caps.

-

Minimum Duct Size:

Duct Run Calculation:

Roof cap

Duct Run Calcuation example:

0ft + 9ft + 9ft + 5ft = 23ft used.

Deduct 23ft from 50ft, 27ft

Calculating Vent System Length

Venting Methods

IMPORTANT:

Roof cap

IMPORTANT:

the ground path is adequate.

of the line.DO NOT ground to a gas pipe.

DO NOT have a fuse in the neutral or ground circuit.

IMPORTANT:

-

Electrical Requirements

Preparation

Range Hood Operations,

Range Hood Operations,

Venting requirements and Electrical requirementsVenting Requirements

wall or roof openings.-

WARNINGSevere Injury

Hood may have very shape edges. Please wear protective gloves if it is necessary to remove any parts for installing, cleaning or servicing.

WARNINGExcessive Weight

Require three or more person to move and install this range hood. Spinal or other bodily

injuries could occur if it is not followed.

WARNINGSevere Injury

Rotating fan can cause severe injury. Stay clear of fan when

motor is running.

Installations :

-

Using references in

and secure it using two mounting screws.

3.

-

Installation

Figure 3

Installation (Continued)

-

-

and

Range Hood Operations

-

-

Increase or Decrease IncreaseIncrease

DecreaseDecrease

Light Decrease

Auto Function

Range Hood Operations (Continued)

Light Decrease

Auto Function

Troubleshooting

-nected.

-

-

3.

-

--

-

NOTE:

Use and Care Information

instructions for future reference.

-

3:

Ampere

Noise Level

Measurements and Diagrams

Installation Overview:D

ation Overview:D

Upper support frame

Range hood

mounting

A

Air

Mov

emen

t Dir

ectio

n

D

Hood-mounting

BD

B

A

range hood

A

All measurements in parenthesis are in millimeter.

Overall:

All measurements in parenthesis are in millimeter.

No. Description No. Description

3

Halogen Light Transformer

MotorHalogen Light

No. Description No. DescriptionMotor

3

No. Description No. Description

3Halogen Light Transformer

WARNINGHazard of Burns!

Light bulb become extremely hot when turned on. DO NOT touch bulb until switched off and cooled.

Touching hot bulbs could cause serious burns.

Maintenance

help preserve the appearance of the range hood.

® ®

® ®

cleaning solution onto or into the control panel. Follow directions of the stainless steel cleaner. CAUTION: Do not

® ®

DO NOT allow deposits to accumulate or remain on the hood.

-

IMPORTANT:

®

-row on the inner ring with the arrow on the outer ring where it

reverse the steps.

-

-

product.

-

TTTTOOOO OOOOBBBBTTTTAAAAIIIINNNN SSSSEEEERRRRVVVVIIIICCCCEEEE UUUUNNNNDDDDEEEERRRR WWWWAAAARRRRRRRRAAAANNNNTTTTYYYY:::YYoYoYouuu mumumuststst pppprereresesesentntnt pppprororo fofofof oooffff orororiigigiggiininin lalalal ppppururur hchchchasasaseee ddadadatetete..

Warranty

-

NO

each individual range hood model.

Contact Us

Disclaimer

Your Notes