Post on 05-Mar-2020
Academic Positions
Assistant Professor, 2016–presentCanada Research Chair in Geometry ProcessingDepartment of Computer ScienceUniversity of Toronto
Assistant Professor, 2018–presentDepartment of MathematicsUniversity of Toronto
Postdoctoral Fellow, 2014–2016Department of Computer ScienceColumbia UniversityMentor: Eitan Grinspun
Postdoctoral Fellow, 2013–2014Department of Computer ScienceEidgenössische Technische Hochschule Zürich (ETH Zurich)Mentor: Olga Sorkine-Hornung
Education
PhD in Computer Science, 2013ETH ZurichETH MedalThesis: Algorithms and Interfaces for Real-Time Deformation of 2D and 3D ShapesAdvisor: Olga Sorkine-Hornung
MA in Computer Science, 2011Courant Institute, New York UniversityAdvisors: Olga Sorkine-Hornung, Denis Zorin
BA with joint major in Mathematics and Computer Science, 2009Courant Institute, New York UniversityDepartmental high honors, magna cum laudeAdvisor: Denis Zorin
ACM SIGGRAPH & Communications of the ACM Publications
1. Oded Stein, Alec Jacobson, Max Wardetzky, Eitan Grinspun. “A Smoothness Energy without BoundaryDistortion for Curved Surfaces,” ACM Transactions on Graphics, 2020.
2. Hsueh-Ti Derek Liu, Alec Jacobson. “Cubic Stylization,” ACM Transactions on Graphics (Proc. SIGGRAPHAsia), 2019.
www.cs.toronto.edu/~jacobson40 St George Street, Room 5266
Toronto, ON, M5S 2E4 Canadajacobson@cs.toronto.edu
+1 507 369 62 59
Alec Jacobson Curriculum Vitæ
1/23
3. Dario Seyb, Alec Jacobson, Derek Nowrouzezahrai, Wojciech Jarosz. “Non-linear sphere tracing forrendering deformed signed distance fields,” ACM Transactions on Graphics (Proc. SIGGRAPH Asia), 2019.
4. Hsueh-Ti Derek Liu, Alec Jacobson, Maks Ovsjanikov. “Spectral Coarsening for Geometric Operators,” ACMTransactions on Graphics (Proc. SIGGRAPH), 2019.
5. Yixin Hu, Teseo Schneider, Xifeng Gao, Qingnan Zhou, Alec Jacobson, Denis Zorin, Daniele Panozzo.“TriWild: Robust Triangulation with Curve Constraints.” ACM Transactions on Graphics (Proc. SIGGRAPH),2019.
6. Rinat Abdrashitov, Alec Jacobson, Karan Singh. “A System for Efficient 3D Printed Stop-Motion FaceAnimation,” ACM Transactions on Graphics, 2019.
7. Hsueh-Ti Derek Liu, Michael Tao, Alec Jacobson. “Paparazzi: Surface Editing by way of Multi-View ImageProcessing,” ACM Transactions on Graphics (Proc. SIGGRAPH Asia), 2018.
8. Gavin Barill, Neil G. Dickson, Ryan Schmidt, David I.W. Levin, Alec Jacobson. “Fast Winding Numbers forSoups and Clouds,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2018.
9. Yixin Hu, Qingnan Zhou, Xifeng Gao, Alec Jacobson, Denis Zorin, Daniele Panozzo. “Tetrahedral Meshing inthe Wild,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2018.
10. Oded Stein, Eitan Grinspun, Max Wardetzky, Alec Jacobson. “Natural Boundary Conditions for Smoothing inGeometry Processing,” ACM Transactions on Graphics, 2018.
11. Songrun Liu, Zachary Ferguson, Alec Jacobson, Yotam Gingold. “Seamless: Seam erasure and seam-awaredecoupling of shape from mesh resolution,” ACM Transactions on Graphics (Proc. SIGGRAPH Asia), 2017.
12. Qingnan Zhou, Eitan Grinspun, Denis Zorin, Alec Jacobson. “Mesh Arrangements for Solid Geometry,” ACMTransactions on Graphics (Proc. SIGGRAPH), 2016.
13. Akash Garg, Alec Jacobson, Eitan Grinspun. “Computational Design of Reconfigurables,” ACM Transactionson Graphics (Proc. SIGGRAPH), 2016.
14. Oliver Glauser, Wan-Chun Ma, Daniele Panozzo, Alec Jacobson, Otmar Hilliges, Olga Sorkine-Hornung. “RigAnimation with a Tangible and Modular Input Device,” ACM Transactions on Graphics (Proc. SIGGRAPH),2016.
15. Leonardo Sacht, Etienne Vouga, Alec Jacobson. “Nested Cages,” ACM Transactions on Graphics (Proc.SIGGRAPH Asia), 2015.
16. Yu Wang, Alec Jacobson, Jernej Barbič, Ladislav Kavan. “Linear Subspace Design for Real-Time ShapeDeformation,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2015.
17. Songrun Liu, Alec Jacobson, Yotam Gingold. “Skinning Cubic Bézier Splines and Catmull-Clark SubdivisionSurfaces,” ACM Transactions on Graphics (Proc. SIGGRAPH Asia), 2014.
18. Daniel Sýkora, Ladislav Kavan, Martin Čadík, Ondřej Jamriška, Alec Jacobson, Brian Whited, MaryannSimmons, Olga Sorkine-Hornung. “Ink-and-Ray: Bas-Relief Meshes for Adding Global Illumination Effects toHand-Drawn Characters,” ACM Transactions on Graphics, 2014.
19. Alec Jacobson, Daniele Panozzo, Oliver Glauser, Cédric Pradalier, Otmar Hilliges, Olga Sorkine-Hornung.“Tangible and Modular Input Device for Character Articulation,” ACM Transactions on Graphics (Proc.SIGGRAPH), 2014.
20. Alec Jacobson, Ilya Baran, Jovan Popović, Olga Sorkine. “Bounded Biharmonic Weights for Real-Time ShapeDeformation,” Communications of the ACM: Research Highlights, 2014.Preface by Joe Waren, 中国版 translated by Kun Zhou
21. Alec Jacobson, Ladislav Kavan, Olga Sorkine-Hornung. “Robust Inside-Outside Segmentation usingGeneralized Winding Numbers,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2013.
Alec Jacobson Curriculum Vitæ
2/23
22. Kaan Yücer, Alec Jacobson, Alexander Hornung, Olga Sorkine. “Transfusive Image Manipulation,” ACMTransactions on Graphics (Proc. SIGGRAPH Asia), 2012.Patent: US9202431
23. Alec Jacobson, Ilya Baran, Ladislav Kavan, Jovan Popović, Olga Sorkine. “Fast Automatic SkinningTransformations,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2012.
24. Alec Jacobson, Olga Sorkine. “Stretchable and Twistable Bones for Skeletal Shape Deformation,” ACMTransactions on Graphics (Proc. SIGGRAPH Asia), 2011.
25. Alec Jacobson, Ilya Baran, Jovan Popović, Olga Sorkine. “Bounded Biharmonic Weights for Real-Time ShapeDeformation,” ACM Transactions on Graphics (Proc. SIGGRAPH), 2011.
Additional Journal and Conference Proceedings Publications
26. Thibault Lescoat, Hsueh-Ti Derek Liu, Jean-Marc Thiery, Alec Jacobson, Tamy Boubekeur, Maks Ovsjanikov.“Spectral Mesh Simplification,” Computer Graphics Forum (Proc. Eurographics), 2020.
27. Wenzheng Chen, Jun Gao, Huan Ling, Edward J. Smith, Jaakko Lehtinen, Alec Jacobson, Sanja Fidler.“Learning to Predict 3D Objects with an Interpolation-based Differentiable Renderer,” Neural InformationProcessing Systems, 2019.
28. Alec Jacobson. “RodSteward: A Design-to-Assembly System for Fabrication using 3D-Printed Joints andPrecision-Cut Rods,” Computer Graphics Forum (Proc. Pacific Graphics), 2019.
29. Hsueh-Ti Derek Liu, Michael Tao, Chun-Liang Li, Derek Nowrouzezahrai, Alec Jacobson. “Beyond PixelNorm-Balls: Parametric Adversaries using an Analytically Differentiable Renderer”, International Conference onLearning Representations, 2019.
30. Lawson Fulton, Vismay Modi, David Duvenaud, David I.W. Levin, Alec Jacobson. “Latent-space Dynamicsfor Reduced Deformable Simulation”, Computer Graphics Forum (Proc. Eurographics), 2019.
31. Silvia Sellán, Herng Yi Cheng, Yuming Ma, Mitchell Dembowski, Alec Jacobson. “Solving PDEs onDeconstructed Domains,” Computer Graphics Forum, 2019.(presented at SGP 2019)
32. Oded Stein, Alec Jacobson, Eitan Grinspun. “Interactive Design of Castable Shapes using Two-Piece RigidMolds,” Computers & Graphics, 2019.
33. Rahul Arora, Alec Jacobson, Timothy Richard Langlois, Karan Singh, David I.W. Levin. “Volumetric MichellTrusses for Parametric Design & Fabrication,” Symposium on Computational Fabrication, 2019.
34. Timothy Jeruzalski, John Kanji, Alec Jacobson, David I.W. Levin. “Error Bounded Online Compression of RigidBody Simulations,” Computer Graphics Forum (Proc. SCA), 2018.
35. Marek Dvoroznak, Saman Sepehri Nejad, Alec Jacobson, Ondrej Jamriska, Ladislav Kavan, Daniel Sykora.“Seamless Reconstruction of Part-Based High-Relief Models from Hand-Drawn Images,” Expressive, 2018.
36. Alec Jacobson. “Generalized Matryoshka: Computational Design of Nesting Objects,” Computer GraphicsForum (Proc. SGP), 2017.
37. Hsueh-Ti Derek Liu, Alec Jacobson, Keenan Crane. “A Dirac Operator for Extrinsic Shape Analysis,”Computer Graphics Forum (Proc. SGP), 2017.
38. Jean-Charles Bazin, Claudia Plüss, Guo Yu, Tobias Martin, Alec Jacobson, Markus Gross. “Physically BasedVideo Editing,” Computer Graphics Forum (Proc. Pacific Graphics), 2016.
39. Alec Jacobson. “Breathing Life into Shapes,” Computer Graphics & Applications: Dissertation Impact, 2015.Invited by James D. Foley
Alec Jacobson Curriculum Vitæ
3/23
40. Romain Prévost, Alec Jacobson, Wojciech Jarosz, Olga Sorkine-Hornung. “Large-Scale Spray Painting ofPhotographs by Interactive Optimization,” Computers & Graphics, 2015
41. David Günther, Alec Jacobson, Jan Reininghaus, Hans-Peter Seidel, Olga Sorkine-Hornung, Tino Weinkauf.“Fast and Memory-Efficient Topological Denoising of 2D and 3D Scalar Fields,” IEEE Transactions onVisualization and Computer Graphics (Proc. SciVis), 2014.
42. Kenshi Takayama, Alec Jacobson, Ladislav Kavan, Olga Sorkine-Hornung. “A Simple Method for CorrectingFacet Orientations in Polygon Meshes Based on Ray Casting,” Journal of Computer Graphics Techniques,2014.
43. Alec Jacobson. “Bijective Mappings with Generalized Barycentric Coordinates: a Counterexample,” Journalof Graphics Tools, 2013.
44. Leonardo Sacht, Alec Jacobson, Daniele Panozzo, Christian Schüller, Olga Sorkine-Hornung. “ConsistentVolumetric Discretizations Inside Self-Intersecting Surfaces,” Computer Graphics Forum (Proc. SGP), 2013.
45. Alec Jacobson, Tino Weinkauf, Olga Sorkine. “Smooth Shape-Aware Functions with Controlled Extrema,”Computer Graphics Forum (Proc. SGP), 2012.
46. Alec Jacobson, Elif Tosun, Olga Sorkine, Denis Zorin. “Mixed Finite Elements for Variational SurfaceModeling,” Computer Graphics Forum (Proc. SGP), 2010.
Juried Demos, Workshop Courses, Posters, & Technical Reports
47. Wenzheng Chen, Jun Gao, Huan Ling, Edward J. Smith, Jaakko Lehtinen, Alec Jacobson, Sanja Fidler.“Learning to Predict 3D Objects with an Interpolation-based Differentiable Renderer,” arXiv, 2019.
48. Alec Jacobson. “RodSteward: A Design-to-Assembly System for Fabrication using 3D-Printed Joints andPrecision-Cut Rods,” ACM Symposium on Computational Fabrication Posters & Short Talks, 2019.
49. Alec Jacobson. “RodSteward: A Design-to-Assembly System for Fabrication using 3D-Printed Joints andPrecision-Cut Rods,” arXiv, 2019.
50. Oded Stein, Alec Jacobson, Max Wardetzky, Eitan Grinspun. “A mixed finite element method with piecewiselinear elements for the biharmonic equation on surfaces,” arXiv, 2019.
51. Oded Stein, Alec Jacobson, Max Wardetzky, Eitan Grinspun. “A Smoothness Energy without BoundaryDistortion for Curved Surfaces,” arXiv, 2019.
52. Rahul Arora, Alec Jacobson, Timothy R. Langlois, Yijiang Huang, Caitlin Mueller, Wojciech Matusik, ArielShamir, Karan Singh, David I.W. Levin. “Designing Volumetric Truss Structures for Computational Fabrication,”arXiv, 2018.
53. Hsueh-Ti Derek Liu, Michael Tao, Chun-Liang Li, Derek Nowrouzezahrai, Alec Jacobson. “AdversarialGeometry and Lighting using a Differentiable Renderer,” Technical Report, 2018.
54. Silvia Sellán, Herng Yi Cheng, Yuming Ma, Mitchell Dembowski, Alec Jacobson. “Solving PDEs onDeconstructed Domains,” Technical Report, 2018.
55. Silvia Sellán, Herng Yi Cheng, Yuming Ma, Mitchell Dembowski, Alec Jacobson. “Solving PDEs onDeconstructed Domains,” Symposium on Geometry Processing Posters, 2018.
56. Alec Jacobson. “libigl: Prototyping Geometry Processing Research in C++,” Graphics Interface Courses,2018.
57. Lawson Fulton, Vismay Modi, David Duvenaud, David I.W. Levin, Alec Jacobson. “Autodef: Non-linearSubspace Simulation for Large Deformation Elastodynamics,” Graphics Interface Posters, 2018.Best Poster Award.
Alec Jacobson Curriculum Vitæ
4/23
58. Michelle Arkhangorodsky, Yanjun Jiang, Alec Jacobson. “Simplification for Large-Scale Fabrication,”Graphics Interface Posters, 2018.
59. Andrew Nelles, Alec Jacobson. “Best-Fit Affine Progressive Meshes,” Graphics Interface Posters, 2018.60. Sarah Kushner, Alec Jacobson. “Example-Based Print Preview for Laser Cutting,” Graphics Interface Posters,
2018.61. Silvia Sellán, Alec Jacobson. “Solving PDEs on Overlapping Domains,” Graphics Interface Posters, 2018.62. Gavin Barill, Neil G. Dickson, Ryan Schmidt, David I.W. Levin, Alec Jacobson. “Fast Winding Numbers for
Soups and Clouds,” Graphics Interface Posters, 2018.63. Rahul Arora, Alec Jacobson, Timothy Richard Langlois, Karan Singh, David I.W. Levin. “Designing Volumetric
Truss Structures for Computational Fabrication,” Graphics Interface Posters, 2018.64. Timothy Jeruzalski, John Kanji, Alec Jacobson, David I.W. Levin. “Error Bounded Online Compression of Rigid
Body Simulations,” Graphics Interface Posters, 2018.65. Rinat Abdrashitov, Alec Jacobson, Karan Singh. “f-Stop: A System for 3D Printed Stop-Motion Facial
Animation,” Graphics Interface Posters, 2018.66. Darren Moore, Alec Jacobson, David I.W. Levin. “Rigless Skinning for Interactive Vector Animation,” Graphics
Interface Posters, 2018.67. Alec Jacobson. “Human-Math Interaction,” Computational Interactivity, Report from Dagstuhl Seminar
17232, 2017.68. Timothy Jeruzalski, Eugene Fiume, Alec Jacobson, David I.W. Levin. “Online Compression of Rigid Body
Simulations using Physics-Inspired Interpolation,” ACM SIGGRAPH Symposium on Computer AnimationPosters, 2017.Best Poster Award.
69. Alec Jacobson, Daniele Panozzo. “libigl: Prototyping Geometry Processing Research in C++,” ACMSIGGRAPH Asia Courses, 2017.
70. Alec Jacobson, Daniele Panozzo. “libigl: Prototyping Geometry Processing Research in C++,” Eurographics/ACM Symposium on Geometry Processing Courses, 2017.
71. Oliver Glauser, Benedek Vartok, Wan-Chun Ma, Daniele Panozzo, Alec Jacobson, Otmar Hilliges, OlgaSorkine-Hornung. “Rig Animation with a Tangible and Modular Input Device,” ACM User Interface Softwareand Technology Symposium Demos, 2016.
72. Qingnan Zhou, Alec Jacobson. “Thingi10K: A Dataset of 10000 3D-Printing Models”, arXiv:1605.04797,2016SGP 2017 Dataset Award
73. Akash Garg, Alec Jacobson, Eitan Grinspun. “Computational Design of Reconfigurables,” Tristate Workshopon Imaging and Graphics Posters, 2016.
74. Qingnan Zhou, Alec Jacobson. “Mesh Arrangements for Solid Geometry,” Tristate Workshop on Imaging andGraphics Posters, 2016.
75. Akash Garg, Alec Jacobson, Eitan Grinspun. “Computational Design of Reconfigurables,” Symposium onComputational Fabrication Posters, 2016.
76. Qingnan Zhou, Alec Jacobson. “Mesh Arrangements for Solid Geometry,” Symposium on ComputationalFabrication Posters, 2016.
77. Alec Jacobson. “Boolean Operations using Generalized Winding Numbers,” Columbia University, 2016.
Alec Jacobson Curriculum Vitæ
5/23
78. Alec Jacobson, Leonardo Sacht, Etienne Vouga. “Nested Cages,” Oberwolfach Report: Discrete DifferentialGeometry, 2015.
79. Alec Jacobson. “Skinning: Real-time Shape Deformation,” Eurographics/ACM Symposium on GeometryProcessing Invited Courses, 2015.
80. Leonardo Sacht, Etienne Vouga, Alec Jacobson. “Nested Cages,” Tristate Workshop on Imaging andGraphics Posters, 2015.
81. Yu Wang, Alec Jacobson, Jernej Barbič, Ladislav Kavan. “Linear Subspace Design for Real-Time ShapeDeformation,” Tristate Workshop on Imaging and Graphics Posters, 2015.
82. Alec Jacobson, Yotam Gingold. “Skinning: Real-time Shape Deformation,” ACM SIGGRAPH Asia InvitedCourses, 2014.
83. Alec Jacobson, Zhigang Deng, Ladislav Kavan, J.P. Lewis. “Skinning: Real-time Shape Deformation,” ACMSIGGRAPH Courses, 2014.
84. Daniele Panozzo, Alec Jacobson. “libigl: A C++ Library for Geometry Processing without a Mesh DataStructure,” Eurographics/ACM Symposium on Geometry Processing Courses, 2014.
85. Alec Jacobson, Daniele Panozzo, Oliver Glauser, Cédric Pradalier, Otmar Hilliges, Olga Sorkine-Hornung.“Tangible and Modular Input Device for Character Articulation,” ACM User Interface Software and TechnologySymposium Demos, 2014.
86. Alec Jacobson, Daniele Panozzo, Oliver Glauser, Cédric Pradalier, Otmar Hilliges, Olga Sorkine-Hornung.“Tangible and Modular Input Device for Character Articulation,” ACM SIGGRAPH Emerging Technologies,2014.
87. Kenshi Takayama, Alec Jacobson, Ladislav Kavan, and Olga Sorkine-Hornung. “Consistently OrientingFacets in Polygon Meshes by Minimizing the Dirichlet Energy of Generalized Winding Numbers,” ETH Zurich,2014.
88. Alec Jacobson. “Schur Complement Trick for Positive Semi-definite Energies,” Columbia University, 2014.89. Alec Jacobson. “Bijective Mappings with Generalized Barycentric Coordinates: A Counterexample,” ETH
Zurich, 2012.90. Alec Jacobson, Olga Sorkine. “A Cotangent Laplacian for Images as Surfaces,” ETH Zurich, 2012.91. Murphy Stein, Alec Jacobson, Yongming Hong. “Games for Learning Institute at NYU: Super
Transformation,” Games for Change Festival Demos, 2010.
Open-source Projects
libigl: A Simple C++ Geometry Processing LibraryAlec Jacobson, Daniele Panozzo, and others
2013–present
gptoolbox: Geometry Processing Toolbox for MATLABAlec Jacobson and others
2013–present
thingi10K: Ten Thousand 3D Models for Testing Robustness of Geometric AlgorithmsQingnan Zhou and Alec Jacobson
2016–present
Awards and Honors
2019 Ontario Early Researcher Award
Alec Jacobson Curriculum Vitæ
6/23
2019 Eurographics Best Paper, Honourable mention2018 Back cover image on Proceedings of ACM SIGGRAPH2018 Computer Graphics Forum Cover Image2018 Graphics Interface Best Poster Award2017 Eurographics Significant Young Researcher Award2017 Canada Research Chair2017 Eurographics/ACM Symposium on Geometry Processing Dataset Award2017 Eurographics Junior Fellow2017 NSERC Discovery Accelerator Supplement2017 ACM SIGGRAPH/Eurographics Symposium on Computer Animation Best Poster Award2016 Connaught New Researcher2015 Eurographics/ACM Symposium on Geometry Processing Software Award2015 US Junior Oberwolfach Fellow2015 NYCASCENT Fellow2015 Back cover image on Proceedings of ACM SIGGRAPH Asia2014 Eurographics Best PhD Thesis2014 Heidelberg Laureate Forum Young Researcher2013 ETH Medal for Outstanding Doctoral Dissertation, top 8% university-wide2013 Intel PhD Fellowship2011 Back cover image on Proceedings of ACM SIGGRAPH2009 New York University Henry M. MacCracken Fellowship (3 years)2009 Grand Prize, Games For Learning Institute Game Design Challenge2009 New York University Founder’s Day Award
Employment
2019–present Adobe Research Visiting Professor, Consultant2016–present University of Toronto Assistant Professor2014–2016 Columbia University
Mentor: Eitan GrinspunPostdoctoral researcher & co-instructor
2013–2014 ETH ZurichMentor: Olga Sorkine-Hornung
Postdoctoral researcher & teaching assistant
2011–2013 ETH ZurichAdvisor: Olga Sorkine-Hornung
Graduate researcher & teaching assistant
2010 Adobe ResearchAdvisor: Jovan Popović
Summer research intern
2009–2011 New York UniversityAdvisors: Olga Sorkine-Hornung, Denis Zorin
Graduate researcher
Alec Jacobson Curriculum Vitæ
7/23
2008–2009 New York UniversityAdvisors: Denis Zorin, Yotam Gingold
Undergraduate researcher
2008 IBMAdvisor: Chuck Wallace
Summer programming intern
2007 Mayo ClinicAdvisor: Željko Bajzer
Summer research intern
Research Funding
2019–2020 SSHRC-CRSH New Frontiers in Research Fund 11.9% acceptance rate$250,000 CAD
2019 Autodesk gift2019 Ontario Early Researcher Award
$140,000 CAD2019 Facebook Oculus Hardware gift2019 Fields Institute
Workshop Funding$25,000 CAD
2018–2020 Fields Institute CQAM Lab$160,000 CAD
2018 Mitacs Globalink Research Award - Campus France$3,500 CAD
2018 Autodesk gift2018 MESH Inc. gift2018 Fields Institute
Workshop Funding$25,000 CAD
2018 NSERC USRAone summer undergraduate research fellow
2018 Fields Institute, FURSPthree summer undergraduate research fellows
2018 Engineering Science Research Opportunities Fundone summer undergraduate research fellow
2018 Fields Instituteone visiting faculty researcher$3,500 CAD
2017–2022 NSERC Discovery, RGPIN–2017–05235$155,000 CAD
2017–2020 NSERC Discovery Accelerator Supplement, RGPAS–2017–507938$120,000 CAD
2017–2022 Canada Research Chair$158,335 CAD
Alec Jacobson Curriculum Vitæ
8/23
2017–2018 Fields Instituteone visiting faculty researcher$10,500 CAD
2017 Fields Institute, FURSPfour summer undergraduate research fellows
2017 NSERC USRAone summer undergraduate research fellow
2016–present Adobe Systems gift2016–2017 Connaught New Researcher Award
$10,000 CAD2015 SGP Software Award
€1,000 EUR2014 US Junior Oberwolfach Fellow
€200 EUR2012 Intel Doctoral Student Honor Programme
$35,000 USD
Conference Talks
Pacific GraphicsRodSteward: A Design-to-Assembly System for Fabricationusing 3D-Printed Joints and Precision-Cut Rods
October, 17, 2019
Graphics Interface (invited talk)Interactive Design of Castable Shapes Using Two-Piece Rigid Molds
May 31, 2019
Graphics Interface (invited course)libigl: Prototyping Geometry Processing Research in C++
May 8, 2018
ACM SIGGRAPH Asialibigl: Prototyping Geometry Processing Research in C++
November 29, 2017
Eurographics/ACM SIGGRAPH Symposium on Geometry ProcessingGeneralized Matryoshka: Computational Design of Nesting Objects
July 3, 2017
Eurographics/ACM SIGGRAPH Symposium on Geometry Processing (invited course)libigl: Prototyping Geometry Processing Research in C++
July 1, 2017
ACM SIGGRAPHComputational Design of Reconfigurables
July 27, 2016
Eurographics/ACM SIGGRAPH Symposium on Geometry Processing (invited course)Skinning: Real-time Shape Deformation, “Direct Methods & Automatic Methods”
June 18, 2016
Graphics Interface (invited talk)Large-Scale Painting of Photographs by Interactive Optimization
June 3, 2016
Eurographics/ACM SIGGRAPH Symposium on Geometry Processing (invited course)Skinning: Real-time Shape Deformation, “Direct Methods & Automatic Methods”
July 5, 2015
ACM SIGGRAPH Asia (invited course)Skinning: Real-time Shape Deformation, “Automatic Methods”
December 3, 2014
Alec Jacobson Curriculum Vitæ
9/23
ACM SIGGRAPHSkinning: Real-time Shape Deformation, “Automatic Methods”
August 14, 2014
ACM SIGGRAPHTangible and Modular Input Device for Character Articulation
August 12, 2014
Eurographics/ACM SIGGRAPH Symposium on Geometry Processinglibigl: A C++ Library for Geometry Processing without a Mesh Data Structure
July 4, 2014
ACM SIGGRAPHRobust Inside-Outside Segmentation using Generalized Winding Numbers
July 22, 2013
ACM SIGGRAPHFast Automatic Skinning Transformations
August 8, 2012
Eurographics/ACM SIGGRAPH Symposium on Geometry ProcessingSmooth Shape-Aware Functions with Controlled Extrema
July 16, 2012
ACM SIGGRAPH AsiaStretchable and Twistable Bones for Skeletal Shape Deformation
December 14, 2011
ACM SIGGRAPHBounded Biharmonic Weights for Real-Time Deformation
August 10, 2011
Eurographics/ACM SIGGRAPH Symposium on Geometry ProcessingMixed Finite Elements for Variational Surface Modeling
July 6, 2010
Invited Talks
TEDx University of Toronto KeynoteGeometry Processing in the Wildinivited by Tracy Barber, Sumana Dhanani
February 13, 2020
New York UniversityCubic Stylizationinvited by Daniele Panozzo
January 31, 2020
Dagstuhl Seminar on Interactive Design and SimulationSpectral Coarsening of Geometric Operatorsinvited by Jörg Peters, Thomas Grandine, Ulrich Reif, Olga Sorkine-Hornung
December 17, 2019
AI For Engineering Summer SchoolGeometry Processing in the Wildinvited by Hesam Salehipour, Mike Haley
August 16, 2019
Beijing Film AcademyGeometry Processing in the Wildinvited by Baoquan Chen
July 28, 2019
Symposium on Art and A.I.Toward Three-Dimensional Cinematographyinvited by Pia Kleber, David Rokeby, Tamara Trojanowska
June 25, 2019
Shape Modeling International KeynoteGeometry Processing in the Wildinvited by Giuseppe Patanè, Raphaelle Chaine
June 21, 2019
CVPR Workshop on Deep Generative Models for 3D Understanding June 17, 2019
Alec Jacobson Curriculum Vitæ
10/23
Geometry Processing in the Wildinvited by Xavier SnelgroveGraphics InterfaceGeometry Processing in the Wildinvited by Robert J. Teather, Andrea Tagliasacchi
May 20, 2019
Fields Institute Workshop on Robust Geometric Algorithms for Computational Fabrication IISolid Geometry Processing on Deconstructed Domainsinvited by Daniel Hambleton
May 3, 2019
University of VictoriaGeometry Processing in the Wildinvited by Andrea Tagliasacchi
April 18, 2019
University of British ColumbiaGeometry Processing in the Wildinvited by Michiel van de Panne
April 17, 2019
National Research Council Canada, Computer Science Colloquium SeriesGeometry Processing in the Wildinvited by Pengcheng Xi
April 16, 2019
Concordia UniversityGeometry Processing in the Wildinvited by Tiberiu Popa
March 12, 2019
Bellairs Workshop on Computer AnimationMoving Geometry by Looking at Itinvited by Paul Kry
February 16, 2019
Carnegie Mellon University, Robotics Institute SeminarGeometry Processing in the Wildinvited by Keenan Crane
February 8, 2019
CG Connect TorontoRobust Geometry Processing: the Life Cycle of a Messy Shapeinvited by Martin de Lasa, Laurence Cymet, and Nikola Milosevic
November 27, 2018
Dagstuhl Seminar on Computational Aspects of FabricationRobust Geometry Processing: the Life Cycle of a Messy Shapeinvited by Bernd Bickel, Marc Alexa, Kristina Shea, Jessica Hodgins
October 26, 2018
Fields Institute Workshop on Robust Geometric Algorithms for Computational FabricationFast Winding Numbers for Soups and Cloudsinvited by Alla Sheffer, Olga Sorkine-Hornung
May 1, 2018
George Mason UniversityFast Winding Numbers for Soups and Cloudsinvited by Yotam Gingold
April 26, 2018
Bellairs Workshop on Computer AnimationFrom Reconfigurables to Matryoshka, Optimizing Shapes and Motions over Space-Timeinvited by Paul Kry
February 10, 2018
BIRS Workshop on Geometry & Computation for Interactive SimulationFrom Reconfigurables to Matryoshka, Optimizing Shapes and Motions over Space-Timeinvited by Jorg Peters, Ulrich Reif, and Dinesh Pai
September 25, 2017
Alec Jacobson Curriculum Vitæ
11/23
Dagstuhl Seminar on Computational InteractivityHuman Math Interactioninvited by Xiaojun Bi, Otmar Hilliges, Takeo Igarashi, and Antti Oulasvirta
June 6, 2017
Graphics InterfaceBreaking Barriers between Humans and Geometryinvited by Elmar Eisemann
May 19, 2017
University of WaterlooRobust Geometry Processing for Irregularly Bounded Domainsinvited by Christopher Batty
April 18, 2017
Bellairs Workshop on Computer AnimationRobust Geometry Processing for Irregularly Bounded Domainsinvited by Paul Kry
February 4, 2017
Toronto User ExperienceBreaking Barriers between Humans and Geometryinvited by Daniel Wigdor
October 25, 2016
Cornell UniversityBreaking Barriers between Humans and Geometryinvited by Steve Marschner
March 22, 2016
Adobe ResearchBreaking Barriers between Humans and Geometryinvited by David Salesin
March 14, 2016
Purdue UniversityBreaking Barriers between Humans and Geometryinvited by Voicu Popescu
March 10, 2016
University of TorontoBreaking Barriers between Humans and Geometryinvited by Karan Singh
March 7, 2016
University of Southern CaliforniaBreaking Barriers between Humans and Geometryinvited by Jernej Barbič
February 18, 2016
UC RiversideBreaking Barriers between Humans and Geometryinvited by K. K. Ramakrishnan
February 10, 2016
University of TokyoBreaking Barriers between Humans and Geometryinvited by Takeo Igarashi
October 30, 2015
Geometry Workshop in SeggauNested Cagesinvited by Alexander I. Bobenko, Helmut Pottmann, and Johannes Wallner
July 12, 2015
Oberwolfach Discrete Differential Geometry WorkshopNested Cagesinvited by Alexander I. Bobenko, Richard Kenyon and Peter Schröder
March 5, 2015
City University of Hong KongFrom Model to Motioninvited by Hongbo Fu
December 9, 2014
Alec Jacobson Curriculum Vitæ
12/23
Visual Effects Society, LondonTangible and Modular Input Device for Character Articulationinvited by Ean Carr
September 17, 2014
Double Negative, LondonTangible and Modular Input Device for Character Articulationinvited by Ean Carr
September 17, 2014
Polytechnic Institute of New York UniversityTangible and Modular Input Device for Character Articulationinvited by Andy Nealen
August 1, 2014
George Mason UniversityRobust Inside-Outside Segmentation using Generalized Winding Numbersinvited by Yotam Gingold
July 19, 2013
New York UniversityRobust Inside-Outside Segmentation using Generalized Winding Numbersinvited by Qingnan Zhou
June 25, 2013
CVGC Seminar Series, Columbia UniversityAlgorithms and Interfaces for Real-Time Deformation of 2D and 3D Shapesinvited by Eitan Grinspun
June 18, 2013
Max-Planck-Institut für Informatik, SaarbrückenAchieving High-quality Shape Deformation in Real Timeinvited by Tino Weinkauf
February 26, 2013
Workshop on Computer Graphics and Emerging Technology,Shenzhen Institutes of Advanced TechnologyAchieving High-quality Shape Deformation in Real Timeinvited by Baoquan Chen
November 26, 2012
New York UniversityFast Automatic Skinning Transformationsinvited by Denis Zorin
July 31, 2012
NSF Workshop on Barycentric Coordinatesin Geometry Processing and Finite/Boundary Element MethodsHigh-quality Weight Functions via Constrained Optimizationinvited by Kai Hormann
July 25, 2012
Freie UniversitätHigh-quality Weight Functions via Constrained Optimizationinvited by Konrad Polthier
June 22, 2012
SIGGRAPH Tokyo (teleconference)Stretchable, Twistable Bones for Skeletal Shape Deformationinvited by Jun Saito
February 24, 2012
LiberoVision, ZurichReal-time Shape Deformation:Bounded Biharmonic Weights and Stretchable, Twistable Bonesinvited by Remo Ziegler
February 2, 2012
DISI University of GenoaReal-time Deformation: Bounded Biharmonic Weights and Stretchable, Twistable Bonesinvited by Enrico Puppo
June 27, 2011
Alec Jacobson Curriculum Vitæ
13/23
ETH Zurich-Disney Research Zurich Tech TalkMixed Finite Elements for Variational Surface Modelinginvited by Alexander Hornung
October 20, 2010
Panels
Mitacs Panel Discussion Sessioninvited by Monica Caverson
November 13, 2019
Beijing Film Academyinvited by Baoquan Chen
July 28, 2019
Fields CQAM Launchinvitied by Huaxiong Huang
June 28, 2018
Teaching
2019 Seminar in Geometry and AnimationUniversity of Toronto
Instructor
2016–2019 Computer GraphicsUniversity of TorontoDesigned novel curriculum
Instructor
2017–2018 Geometry ProcessingUniversity of TorontoDesigned novel curriculum
Instructor
2015 Seminar in Geometry and AnimationColumbia UniversityDesigned novel curriculum
Co-instructor
2013 Advanced Topics in Visual ComputingETH Zurich
Co-instructor
2011–2013 Computer GraphicsETH Zurich
Assistant
2008–2009 America Counts Math InterventionClinton Public Middle School for Artists and Writers, New York
Student teacher
Advising
Seungbae BangPostdoc Fellow, University of Toronto
2019–present
Silvia SellánPhD candidate, University of Toronto
2019–present
Risa UlinskiPhD candidate, University of Toronto
2019–present
Josh HolinatyMSc candidate, University of Toronto
2019–present
Alec Jacobson Curriculum Vitæ
14/23
Thomas DaviesMSc candidate, University of Toronto
2019–present
Hsueh-Ti Derek LiuPhD candidate, University of Toronto
2017–present
Sarah KushnerPhD candidate, University of Toronto
2017–present
Oded SteinPhD candidate, Columbia University
2015–present
Etienne CormanPostdoc Fellow, University of Torontonext stop: faculty position, CNRS
2018–2019
Changjian Livisiting PhD candidate, University of Hong Kong
2018–2019
Aditya SanghiMScAC, University of Torontonext stop: Autodesk
2018
Gavin BarillMSc, University of Torontonext stop: PhD candidate McGill Unversity, Mathematics
2017–2019
Lawson FultonMSc, University of Torontonext stop: software engineer at MESH Inc.
2017–2019
Timothy JeruzalskiMSc, University of Torontonext stop: PhD candidate at University of Toronto
2016–2018
Leonardo Koller Sachtvisiting PhD student from IMPA, ETH Zurichnext stop: adjunct professor at Universidade Federal de Santa Catarina
2012–2014
Stefan MessmerMS, ETH Zurichnext stop: senior software engineer at MP Technology
2013–2014
Dingzeyu Livisiting BA student from HKUST, ETH Zurichnext stop: PhD candidate at Columbia University
2012–2013
Christian SchulzMS, ETH Zurichnext stop: PhD candidate at ETH Zurich
2012
David MeierMS, ETH Zurichnext stop: software engineer at LiberoVision
2012
Oliver GlauserMS, ETH Zurichnext stop: PhD candidate at ETH Zurich
2011–2012
Yang Song 2010–2011
Alec Jacobson Curriculum Vitæ
15/23
MA, New York Universitynext stop: PhD candidate at University of Utah
Undergraduates and summer students
Cindy ZhuUnionville High School, visiting
2019
Nanik AdnaniMonarch Park Collegiate Institute visiting
2019
Eris ZhangUniversity of Toronto
2019
Silvia SellánUniversity of Oviedo, visitingFields Undergraduate Summer Research Program
2018
Jacob KestenRice University, visitingFields Undergraduate Summer Research Program
2018
Ang Yan ShengNational University of Singapore, visitingFields Undergraduate Summer Research Program
2018
Arjun ChhabraUniversity of Toronto
2018
Lizhe ChenUniversity of Toronto
2018
Eduard Gonzalvo GelabertUniversitat Politècnica de Catalunya, visitingCentre de Formació Interdisciplinària Superior
2017–2018
Herng YiMassachusetts Institute of Technology, visitingFields Undergraduate Summer Research Program
2017
Silvia SellánUniversity of Oviedo, visitingFields Undergraduate Summer Research Program
2017
Mitchell DembowskiReyerson University, visitingFields Undergraduate Summer Research Program
2017
Christine MaUniversity of TorontoFields Undergraduate Summer Research Program
2017
Gavin BarillUniversity of Toronto
2017
Darren MooreUniversity of Toronto
2017
Alec Jacobson Curriculum Vitæ
16/23
Lawson FultonUniversity of Toronto
2017
Klint QinamiColumbia University
2016
Lucas SchuermannColumbia University
2015
Vaibhav VavilalaColumbia University
2015
Doctoral Committee
Baptiste AnglesUniversity of VictoriaGeometric Modeling with Primitives
April 18, 2019
Songrun LiuGeorge Mason UniversityOpenning Up New Possibilities Of Linear Blend Skinning
April 27, 2018
Akash GargColumbia UniversityInteractive, Computation Assisted Design Tools
February 13, 2017
Editorial Posts, Workshop Organizing, Program Chairing
General Chair, Symposium on Geometry Processing, 2021Program Chair, Pacific Graphics, 2020Program Chair, Symposium on Geometry Processing, 2020Program Chair, Graphics Interface, 2020Software & Dataset Awards Chair, Symposium on Geometry Processing, 2019–presentOrganizer, Fields Institute Workshop on Robust Geometric Algorithms for Computational Fabrication, 2019Graduate School Chair, Symposium on Geometry Processing, 2018Organizer, Fields Institute Workshop on Robust Geometric Algorithms for Computational Fabrication, 2018Associate Editor, Computers & Graphics, 2017–presentPosters Chair, Pacific Graphics, 2017
Conference Program Committees
ACM SIGGRAPH, 2017, 2018, 2020ACM SIGGRAPH Asia, 2019ACM SIGGRAPH Conflict of Interest Coordinator, 2019ACM SIGGRAPH Asia Doctoral Consortium Committee, 2018ACM SIGGRAPH Asia Courses, 2015ACM SIGGRAPH Asia Technical Briefs & Posters, 2016, 2017, 2018CAD/Graphics, 2015Eurographics, 2017, 2018Eurographics Short Papers, 2012, 2013, 2014
Alec Jacobson Curriculum Vitæ
17/23
Geometric Modeling and Processing, 2014, 2015, 2016, 2017Graphics Interface, 2017International Conference on 3D Vision (3DV), 2015, 2016, 2017Pacific Graphics, 2014, 2015, 2016, 2017, 2019Shape Modeling International, 2016, 2018, 2019Shape Modeling International – Fabrication and Sculpting Event (FASE), 2019Symposium on Computer Animation, 2015, 2016, 2017, 2018Symposium on Computational Fabrication, 2017Symposium on Geometry Processing, 2013, 2014, 2015, 2016, 2017, 2018, 2019Symposium on Geometry Processing Reproducibility Stamp, 2016Replicability Stamp, 2017
Awards Committees
Pacific Graphics Awards, 2019Symposium on Geometry Processing Software Award, 2017, 2018, 2019Symposium on Geometry Processing Dataset Award, 2018
Conference Session Chairing
ACM SIGGRAPH, 2017, 2018, 2019ACM SIGGRAPH Asia, 2018, 2019ACM SIGGRAPH Asia Technical Briefs, 2017Eurographics, 2017Graphics Interface, 2017, 2018, 2019Pacific Graphics, 2019Symposium on Geometry Processing, 2015, 2016, 2017, 2019TEDxUofTSalon, 2017Tristate Workshop on Imaging and Graphics, 2015
Funding Referee Service
Fields Undergraduate Research Summer Program, Committee 2019Israeli Science FoundationMitacs AccelerateNSERC DiscoverySNF Early PostDoc.Mobility Fellowship
Referee Service
ACM SIGGRAPHACM SIGGRAPH AsiaACM SIGGRAPH Asia CoursesACM SIGCHIACM Transactions and GraphicsACM Transactions on Spatial Algorithms and SystemsCAD/GraphicsCVPR Conference on Computer Vision and Pattern Recognition
Alec Jacobson Curriculum Vitæ
18/23
Computer Aided Geometric DesignComputer Graphics ForumComputers and GraphicsECCV European Conference on Computer VisionEngineering with ComputersEurographicsEurographics Short PapersGeometric Modeling and ProcessingGraphical ModelsGraphics InterfaceIEEE Computer Graphics and ApplicationsIEEE Transactions on Visualization and Computer GraphicsIEEE Robotics & Automation LettersInternational Conference on 3D Vision (3DV)International Journal of Computer VisionInternational Journal for Numerical Methods in EngineeringJournal of Computer Graphics TechniquesJournal of Graphics ToolsMathematical GeosciencesPacific GraphicsSIAM Journal of Imaging SciencesSIBGRAPI Conference on Graphics, Patterns and ImagesShape Modeling InternationalSymposium on Computer AnimationSymposium on Computational FabricationSymposium on Geometry ProcessingTEI ACM Conference on Tangible, Embedded and Embodied InteractionsUIST ACM Symposium on User Interface Software and Technology
Service
University of Toronto, Computer Graphics Club, Faculty Coordinator
Visitors I have hosted
Adrian ButscherAutodesk ResearchDemystifying Topology Optimization
December 12, 2019
Changxi ZhengColumbia UniversityComputational Design for Bridging Physical and Digital Worlds
December 3, 2019
Michal EdelsteinTechnionAutomatic Non-Isometric Shape Correspondence using a Genetic Algorithm
November 6, 2019
Seungbae BangKAISTBreathing life into digital characters
October 9, 2019
Alec Jacobson Curriculum Vitæ
19/23
Mirela Ben ChenTechnionChebyshev Nets from Commuting PolyVector Fields
September 18, 2019
Francis WilliamsNew York UniversityGeometric Priors of Feedfoward ReLU Networks
August 12, 2019
Thomas LumpeETH Zurich4D Printing in Engineering Design Research: Materials, Methods, and Applications
August 7, 2019
Dale HaywardSee Creatures FilmsBone Mother: The Challenges of Making an Indie 3D-Printed Film
July 22, 2019
Brady PetersUniversity of Toronto, Daniels Faculty of ArchitectureComputer-generated Architecture: The Smithsonian Courtyard
May 16, 2019
Eitan GrinspunColumbia UniversityA Geometric Perspective on Computing Motion
May 14, 2019
Yotam GingoldGeorge Mason UniversityColor, Geometry, and Time-Lapse Painting
May 6, 2019
Yu ZouUniversity of Toronto, Materials Science and EngineeringAdditive manufacturing and mechanical properties of metallic materials across length scales
April 4, 2019
Maria YabloninaUniversity of StuttgartTask-Specific Architecture Machines
April 1, 2019
Marc AlexaTU BerlinConforming Regular Triangulations
February 28, 2019
Andrea TagliasacchiGoogleCapture, Tracking, and Compression of 4D Geometry
January 31, 2019
Changjian LiThe University of Hong KongBendSketch: Modeling Freeform Surfaces Through 2D Sketching
September 13, 2018
Yixin HuNew York UniversityTetrahedral Meshing in the Wild
August, 9, 2018
Oded SteinColumbia UniversityNatural Boundary Conditions for Smoothing in Geometry Processing
April 6, 2018
Morgan McGuirenVidia Research, University of Waterloo, Williams CollegeRealistic 3D Graphics in Real Time
December 14, 2017
Alec Jacobson Curriculum Vitæ
20/23
Hanno ReinUniversity of Toronto, Physical and Environmental SciencesThe Numerical Challenges of Simulating Planetary Systems
December 7, 2017
Nobuyuki UmetaniAutodesk ResearchExploring Generative 3D Shapes Using Autoencoder Networks
November 16, 2017
Etienne CormanCarnegie Mellon UniversityFunctional Characterization of Deformation Fields
September 22, 2017
Dominik MichelsKAUSTOn the Integration of Stiff Nonlinear Problems
September 13, 2017
Oliver WeegerSingapore University of Technology and DesignIsogeometric collocation methods for nonlinear 3D rods
August 18, 2017
Marc AlexaTU BerlinEye Tracking in 3D
July 27, 2017
Erik PostmaMaplesoft Research & DevelopmentExamples of Computer Algebra with Maple
July 13, 2017
Nobuyuki UmetaniAutodesk ResearchNeuralCFD: Learning Three-dimensional Flow for Interactive Aerodynamic Design
June 15, 2017
David HahnIST AustriaSimulating with surfaces: Boundary elements for liquids and fractures
May 11, 2017
Derek LiuCarnegie Mellon UniversityA Spectrum of Spectra: From Instrinsic to Extrinsic Shape Analysis
April 28, 2017
Cory MogkAutodesk ResearchMore than AutoCAD and Maya: The Hidden Secrets of Autodesk
April 13, 2017
Liane MakaturaDartmouth UniversityEnvironment-Scale Fabrication: Replicating Outdoor Climbing Experiences
March 30, 2017
Emilio Vital BrazilIBM ResearchFacing the high-dimensions: Inverse projection with radial basis functions
March 9, 2017
Eftychios SifakisUniversity of Wisconsin, MadisonDigital humans, virtual surgery and fast fluids:Do they have more in common than their hunger for performance?
February 23, 2017
Daniel HambletonMESH Inc.
February 16, 2017
Alec Jacobson Curriculum Vitæ
21/23
IOGRAM: A New Development Platform for 3D SoftwareJoaquim JorgeInstituto Superior TécnicoMultimodal interfaces for Shape Exploration: Beyond 2D Sketching
January 26, 2017
Marius KintelShapefactoryOpenSCAD: A different approach to 3D Modeling
December 1, 2016
Ali MazalekRyerson UniversityMovement, Material, Mind: Tangible and Embodied Interactions for Discovery and Learning
November 24, 2016
Noah LockwoodIndustrial Light and MagicVFX and Computer Science: Raptors, Rathtars, and Augmented Reality
November 7, 2016
Nobuyuki UmetaniAutodesk ResearchPrintone: Interactive Resonance Simulation for Free-form Print-wind Instrument Design
November 3, 2016
Jovan PopovićAdobe ResearchCharacter Animator
October 26, 2016
David SteinmanUniversity of Toronto, Mechanical and Biomedical EngineeringTowards illustration-inspired visualization of cerebral aneurysm blood flow dynamics
October 6, 2016
David DuvenaudUniversity of Toronto, Machine LearningDifferentiating through physical simulations to optimize initial conditions
September 22, 2016
Christopher BattyUniversity of WaterlooSurface-Only Animation of Gases and Liquids
September 15, 2016
David PalmerPixar ResearchDiscrete measured foliations and applications
September 8, 2016
Oded SteinColumbia UniversityThe finite element method for higher-order PDEs on subdivision surfaces
September 1, 2016
Oliver GlauserETH ZurichRig Animation with a Tangible and Modular Input Device
April 21, 2016
Roi PoranneETH ZurichScalable Locally Injective Mappings
April 21, 2016
Qingnan ZhouNew York UniversityPushing the Limits of 3D Printing Technologies
March 24, 2016
Ken Perlin June 18, 2015
Alec Jacobson Curriculum Vitæ
22/23
New York UniversityChalktalkAndy NealenNYU PolyExploring Game Space
May 5, 2015
Noam AigermanWeizmann InstituteRepresentation of bijections between surface meshes using non-injective mappings to the plane
August 18, 2014
Maks OvsjanikovÉcole PolytechniqueGeometry Processing via Linear Operators
May 20, 2014
Alec Jacobson Curriculum Vitæ
23/23