Post on 28-Oct-2019
+91 22 2600 0555 / 56 diya@eliteplus.co.in www.eliteplus.co.in
61/62 Radheya, 14th Road, Khar (w), Mumbai - 400052, India
17 - 08 - 19 (08.00 PM)
Supported by:
Ashok Chaturvedi, Chairman and Managing Director, UFLEX Ltd.
Address by: Shri. P. Raghavendra Rao, IAS, Secretary, DCPC, Government of India
Vipul Shah, Ch Reliance Industries Ltd.ief Operating Officer - Petrochemicals,
Coffee Break & Networking
Shri Sudhir Shrivastava, IAS, Chairman, Maharashtra Pollution Control Board
Session Chairman: Indrajit Pal, IAS, Ex-Secretary, DCPC, Ministry of Chemicals & Fertilizers, Government of India
Kamal P. Nanavaty, President - Strategy Development, Reliance Industries Ltd.Opening Address : Last One Year of Rollercoaster Ride of Flexible Packaging IndustryWelcome Remarks : Nidhi Verma, Director, ElitePlus Business Services
Registrations
Keynote Address 3: New Plastics Economy Global Commitment to End Plastic Waste, and its Impact on Films and Flexible Fackaging
Keynote Address 4: Global Economic and Geopolitical Trends - India's Role Dr. Shubhada Rao, Group President & Chief Economist, YES BANK
Keynote Address 1: Circular Economy
Keynote Address 2: Vision of Plastic Industry and the Current Issues
David Clark, Vice President, Sustainability, Amcor Ltd.
BUSINESS SESSION 1: PACKAGING - RECYCLING AND SUSTAINABILITY
Plenary SessionGovernment Perspective on Packaging and Managing Plastic Waste
Panel Discussion 1 - Defining Single Use Plastics (SUP)
Interactive Q & A Session
BUSINESS SESSION 2: POST CONSUMER WASTE MANAGEMENTCleaning to Circular Economy- Journey to connect with Mother Nature Afroz Shah, Advocate, Champions of the Earth - UN Environment, Indian of the Year
Moderator: Pradeep Banerjee, Executive Director-Supply Chain, Hindustan Unilever Ltd.
Priyank Arya, Corporate Head EHS, Dabur India Ltd. | Maneesh Sharma, Head Packaging Development, Future Consumer Ltd. | Dr. Atul Sud, Director Legal, Regulatory & Corporate Affairs, Perfetti Van Melle India Pvt. Ltd | Keshav Gupta, Consultant - Standards, Parle Products Interactive Q & A Session
Padma Shri Prof. Dr. Rajagopalan Vasudevan - Plastic Man of India, Professor-TCE / Indian Scientist, Thiagarajar College of Engg, Madurai | Dr. D D Kale, Ex Professor of Polymer Technology, ICT, Mumbai. | Padma Shri Dr. S Sivaram, Honorary Professor and INSA Senior Scientist, Indian Institute of Science Education and Research | Dr. S.K. Nayak, Director General and CEO, CIPET.
Panel Discussion 2 - Strategies for fulfilling EPR Obligations
Chitranjan Dar, Group Head, ITC Limited | Barun Banerjee, Corp Packaging Development Manager, Nestle India Ltd. | Jaideep Gokhale, Director of Communications & Sustainability Region South & South East Asia, Tetra Pak |
Plastics and Circular EconomyLouis Lindenberg, Global Packaging Sustainability Director, Unilever
Panel Discussion 3 - Plastic Waste Management - from the battle ground
Interactive Q & A Session
Environmental Sustainability – Plastics: Boon or Bane
(Leading Waste collection and disposal start-ups share their experiences)
Session Chairman: Prof (Dr.) N. C. Saha, Vice President, Asian Packaging Federation (APF) & Former Director, IIP, Govt. of India
Lunch & Networking
Panel Moderator: Surendra Patawari, Chairman and Founder, Gemini Corporation NV, Belgium
Suhas Dixit, Director, Agile Process Chemicals LLP
Sandeep Patel, Founder and CEO, NEPRA | Ashish Jain, Director, Indian Pollution Control Association | Aditya Dalmia, Managing Director, Dalmia Polypro Industries Pvt. Ltd. | Harshad Barde, General Secretary, Kagad Kach Patra Kashtakari Panchayat & Director, SWaCH | Wilma Rodrigues, Founder & CEO Saahas Zero Waste
Chemical Recycling of Films & Flexible Packaging
BUSINESS SESSION 3: FLEXIBLE PACKAGING IS FUTURE READY
Dr. Arup Basu, Managing Director, Huhtamaki PPL Ltd.Flexible Packaging: Serving Society, Sensibility and Sustainability
Session Chairman: V. K. Taparia, Executive Director, Supreme Industries Ltd.
Shri. Praveen Pardeshi, IAS, Municipal Commissioner, Municipal Corporation of Greater Mumbai, India
Markus Gschwandtner, Managing Director & CEO, Brückner Servtec GmbH
Blue goes Green - The Reifenhäuser approach for sustainable packaging
Making Flexible Packaging More Sustainable
Interactive Q & A SessionSpecial address by: Shri C.K. Mishra, IAS, Secretary - Ministry of Environment, Forest & Climate Change, Government of India
Circular Economy & Digitalisation in BO film industry
Joachim Oberbauer, Operations Director Business Unit Blown Film Machinery, Hosokawa Alpine AktiengesellschaftFuture Challenges and Opportunities
Francesco Peccetti, Marketing & Communication Manager and Sales Area Manager for India, Bangladesh, Iran, Pakistan and Sri Lanka, COLINES®
Special Address by: Shri Amitabh Kant, IAS, CEO, NITI Aayog, Government of India
BUSINESS SESSION 5: PACKAGING STRATEGIES FOR FUTURE
Mohammed Nadeem, CEO, Paharpur 3P
Recyclable Solutions & Flexible Packaging
Eugen Friedel, Sales Director, Reifenhäuser Blown Film GmbH
Coffee Break & Networking
BUSINESS SESSION 4: NEW GENERATION: TECHNOLOGY TRENDS IN MANUFACTURING
Pankaj Poddar, CEO, Cosmo Films Ltd.Sustainability-360-degree approach from Industry Perspective- The war on Plastic Pollution is Winnable
Sanjeev Yadav, Director - NPD & R&D, Jindal Poly Films Ltd.
Mono Oriented Films and their Markets
Interactive Q & A Session
Emerging Packaging Business Strategies for 2020Suresh Gupta, Packaging Industry Mentor
Journey to Recyclable, Compostable, or Biodegradable Packaging
Jeevaraj Pillai, Jt. President - Packaging & New Product Development, UFLEX Limited
Rob Cotton, R&D Director of Packaging Material and Standards, PepsiCo
Evening Speaker: Public Private Partnership Model for EPR Implementation
Feedback Lucky Dip Prizes Networking Cocktails & Dinner
Share a laugh with: Manish K Tyagi - Stand-up Comedy & Anshu Mor - Stand-up Comedian
Grand Lucky Dip Prizes
Replacement of “Toluene” with other solvents, in the light of Regulations
Marcin Lapaj, Global Business Development Manager- Circular Economy, Henkel AG & Co. KGaA
Adhesives and coatings as enablers of circular economy in packaging and consumer goods
Umesh Anand, Joint Managing Director, HPL Additives Ltd.
OXO- BIODEGRADABLE ADDITIVE -- SOLUTIONS FOR FLEXIBLE PACKAGING
Sebastian Anton, Head of Global Business Development, OXEA GmbH
Session Chairman: Chakravarthi AVPS, Global Ambassador, WPO
Keynote Address1: A Status on National Standards for Sustainable Packaging
Ajit Singh, Chairman & Co- Founder, ACG Worldwide
Nidhi Verma, Director, ElitePlus Business Services
Nilesh Shah, Senior Technical Advisor, ExxonMobil Chemical Company India Pvt. Ltd.
Dr R. K. Bajaj, Deputy Director General (Standardization),
Keynote Address 2: Continuing our journey in sustainable packaging
Shiva Mudgil, Senior Research Analyst - Supply-chain and Dairy, Vice President, Rabo Research Food & Agribusiness Mumbai, Rabobank India
R2R processing – future applications beyond hardware Coating and printing processes and machinery concepts for packaging and smart films, printed electronics and medical applications
Interactive Q & A Session
Bureau of Indian Standards, Government of India
BUSINESS SESSION 6: ADVANCEMENTS IN MATERIALS IN PACKAGING-POLYMERS
Advancement in Materials in Packaging – PolymersRajnish Mehta, Executive Director- Corporate Strategy, Planning & Business Development, Hindustan Petroleum Corporation Ltd.
Message From: Prakash Javadekar, Hon'ble Minister of Environment, Forest and Climate Change Indian Government Ministry
Innovative and Sustainable Packaging Solutions
Indian Flexible packaging industry with focus on Food & beverages sector
Coffee Break & Networking
And the Journey Continues
BUSINESS SESSION 7: CONVERTING OPERATIONS IN PACKAGING - PART 1
2019 DuPont™ Cyrel® Product Solutions for Flexible PackagingJason Zhao, Regional Technical Manager - Asia Pacific, DuPont Advanced Printing
Hermann Veismann, General Manager Business Unit Printing and Finishing, WINDMÖLLER & HÖLSCHER KG
Sustainable Disruption – Mastering Growth in a rapidly changing Business Environment
Extended Gamut – New Opportunities for Flexo and Gravure
Esa-Matti Aalto, Managing Director / CEO, Polytype Converting GmbH
Food Flexible Packaging Structural Evolutions witnessed in the market and Opportunities for SustainabilityGiovanni Caprioglio, Head of Sales, Bobst Group
Andrea Glawe, Regional Sales Director - Asia & Pacific, KROENERT GmbH & Co KG.
Lunch & Networking
BUSINESS SESSION 8: CONVERTING OPERATIONS IN PACKAGING – PART 2
Uteco Data Acquisition and Analysis.Giuseppe Sauli, Area Manager - South Asia and Far East, UTECO Group Future Proofing of Slitter RewindersBiku Kohli, Managing Director, SP ULTRAFLEX SYSTEMS (P) Ltd.
Interactive Q & A Session
Nico Grams, Area Manager, Erhardt + Leimer / SOFTAL Corona & Plasma GmbH
Coffee Break & Networking
BUSINESS SESSION 9: INKS, ADDITIVES & ADHESIVES
Sustainability Solutions for Flexible Printing
Sustainable Flexible Packaging Solutions - Films, Bags / Pouches and Packaging
Andy Dickinson, EMEA Application Sales Manager, SYSTECH ILLINOIS
Gautam Prabhu, Vice President - Converting Division, Reifenhauser India Marketing Ltd, Pelican RotoFlex Pvt. Ltd.
The Importance of Carrying Out OTR & WVTR Permeation Testing On Sustainable Packaging
Surface Treatment – Corona or Plasma?
Interactive Q & A Session
Vijay Shankar, Vice President, Mamata Extrusion Systems Pvt Ltd
Growth & Sustainability