Strata Silica-Based Solid Phase Extraction (SPE) Sorbents
25 Cleanup Solutions for a Variety of Samples
www.phenomenex.com02
Fact or Fiction? All Silica-Based SPE Sorbents are the Same
Fiction. Strata® SPE products embody quality and performance. Our extensive quality control procedures provide trouble-free solid phase extraction methods.
Reproducible Results Consistent manufacturing and QC ensures reproducible resultsThis study shows recovery data for 5 different lots of Strata C18-E 200 mg/3 mL tubes. Strata provides high, consistent and reliable recoveries for 3 different drug compounds every time.
NADOLOL
Ab
solu
te R
ecov
ery
%
120
100
80
60
40
20
0
Lot Number1 2 3 4 5
METOPROLOL
Ab
solu
te R
ecov
ery
%
120
100
80
60
40
20
0
Lot Number1 2 3 4 5
PROPRANOLOL
Ab
solu
te R
ecov
ery
%
120
100
80
60
40
20
0
Lot Number1 2 3 4 5
Cleaner Extracts
Inert material leads to cleaner extracts In this comparison test, Strata C18-E gives cleaner extracts than manufacturer’s alternative solutions.
*Varian® Bond Elut® C18Phenomenex
Strata C18-E
*Biotage® IST® ISoluTE® C-18(EC)*Waters® Sep-Pak® C18
*Contact Phenomenex for details regarding this method. Comparative separations may not be representative of all applications. Waters and Sep-Pak are registered trademarks of Waters Corporation. Biotage, IST and ISOLUTE are registered trademarks of Biotage. Varian is a registered trademark of Varian, Inc. Bond Elut is a registered trademark of Agilent Technologies, Inc.
www.phenomenex.com 03
ContentsLearn More About Strata® SPE SorbentsWith 25 sorbents to choose from, we’ve highlighted the benefits of each to make your sorbent selection easier.
Select Your Perfect MatchSelect your Strata SPE sorbent by using our Strata Selection Tree or use the Cross-Reference Chart to choose a guaranteed alternative to your current SPE sorbent.
Develop Your Method in 3 Easy Steps Start Your Method Now
Applications: Search Our Website
Industry Applications: We’ve Done the Work for You Environmental: • Cleanup of Polycyclic Aromatic Hydrocarbons (PAHs)• Improved Diesel Fractionation
Food and Beverage:• Simultaneous Extraction of Melamine and Cyanuric Acid• Cleanup of Aflatoxins from Peanut Butter
Ordering Information
04 - 05
06 - 07
08 - 09
10
11
12 - 13
14 - 15
16 - 19
www.phenomenex.com04
Learn More About Strata® SPE Sorbents
Strata silica-based SPE sorbents are available in reversed phase, normal phase, ion-exchange, and specialty sorbents. Use the chart below to learn more about Strata SPE sorbents and the additional benefits each phase can bring to your extraction methods.
Reversed Phase Sorbents
Typical Application Additional Benefits Phase Sorbent Chemistry
Extraction of hydrophobic or polar organic analytes from aqueous matrices
Extraction of hydrophobic molecules C18-E
Enhanced cleanup of hydrophobic compounds that contain hydroxy or amine functional groups
C18-U
Wide pore for the extraction of large hydrophobic molecules (up to 75 kDa)
C18-T
Extraction of extremely hydrophobic compounds that are retained too tightly on C18-E
C8
Extraction of aromatic compounds Phenyl
Extraction of non-polar compounds that are retained too tightly on C18-E
CN
Extraction of non-polar and polar compounds; pH resistant sorbent
SDB-L
Normal Phase Sorbents
Typical Application Additional Benefits Phase Sorbent Chemistry
Extraction of polar analytes from non-polar organic solvents
Extraction of polar compounds CN
Extraction of strong anions NH2
Extraction of polar compounds that are similar in structure
Silica
Extraction of pesticides Florisil® (FL-PR) Florisil
Si
O
O
O
Si
O
O
OSi
Si
O
O
O
Si
O
OOH
Si
O
O
O
Si
O
O
OSi
Si
O
O
O
Si
O
O
OSi
Si
O
O
O
Si
O
O
OSi
Si
O
O
O
Si
O
OOH
CN
n)
)
Si
O
O
O
Si
O
OOH
CN
Si
O
O
O
Si
O
O
NH2
NH2
Si
O
O
O
Si
O
O
OH
OH
www.phenomenex.com 05
Ion-Exchange Sorbents
Typical Application Additional Benefits Phase Sorbent Chemistry
Extraction of charged analytes from aqueous or non-polar organic samples
Extraction of quaternary amines WCX
Extraction of 1°, 2°, and 3° amines SCX
Mixed-mode cation-exchange that also provides hydrophobic retention
Screen-C
Large particle size, mixed-mode cation-exchange that also provides hydrophobic retention
Screen-C GF
Extraction of strong anions NH2
Extraction of weak anions SAX
Mixed-mode anion-exchange that also provides hydrophobic retention
Screen-A
Fractionation of neutral compounds such as amides from acidic and basic analytes
ABW
Specialty Sorbents
Typical Application and Additional Benefits Phase Sorbent Chemistry
Extraction of polar compounds from food and environmental samples Alumina-N (AL-N)
Proprietary
Extraction of hydrocarbons from environmental samples while simultaneously removing excess water
Eco-Screen Proprietary
Fractionation of aliphatic and aromatic hydrocarbons from environmental samples
EPH (Extractable Petroleum Hydrocarbons)
Simultaneous extraction of melamine and cyanuric acid from food and biological samples
Melamine Proprietary
Extraction of polycyclic aromatic hydrocarbons (PAHs) from water samples as defined in EPA Method 550.1 while simultanously removing humic acids
PAH Proprietary
Removal of aqueous residues from organic solutions in an effort to reduce blow-down time
Sodium Sulfate Sodium Sulfate
Si
O
O
O
Si
O
OOH
OH
O
Si
O
O
O
Si
O
O
N Cl
Si
O
O
O
Si
O
O
N Cl
Si
O
O
O
Si
O
O
NH2
NH2
Si
O
O
O
Si
O
OOH
N Cl-
Si
O
O
O
Si
O
O
N Cl
Si
O
O
O
Si
O
O
S
O
O
NH2
O H
Si
O
O
O
Si
O
O
OH
OH
Si
O
O
O
Si
O
OOH
S
O
O H
O
www.phenomenex.com06
Select Your Perfect Match
Use the Strata® Selection Tree below to find the sorbent that is best for your analysis.
Strata Selection Tree
aqueous
water
ionic
organic
organic
neutral
organic
neutral
nonpolar
reversedphase
SDB-L
C18-E
C8
Phenyl
(+)basic
cation-exchange
SCX
WCX
Screen-C
Screen-C GF
(-)acidic
anion-exchange
SAX
NH2
Screen-A
polar
reversedphase
CN
neutral
moderatelypolar
reversedphase
C8
CN
C18-U
nonpolar
reversedphase
SDB-L
C18-E
C8
Phenyl
moderatelypolar
normalphase
Si-1
NH2
EPH
Eco-Screen
AL-N
polar
normalphase
CN
Si-1
FL-PR
NH2
(+)basic
cation-exchange
SCX
WCX
Screen-C
Screen-C GF
(-)acidic
anion-exchange
SAX
NH2
Screen-A
ionic
If Phenomenex products in this brochure do not provide at least an equivalent separation as compared to other products of the same phase and comparable dimensions, return the product with your comparative data within 45 days for a Full REFuND.
www.phenomenex.com 07
Cross-Reference Chart
The below Strata® products are guaranteed alternatives to competitive products listed.
Phenomenex Strata
Waters® Sep-Pak®
Agilent® SampliQ®
Varian® Bond Elut®
Supelco® Discovery® UCT®
JT BAKER® Bakerbond
Biotage® IST® ISOLUTE®
Macherey-Nagel® Chromabond®
Reversed Phase
C18-E tC18 SampliQ C18ECBond Elut C18
DSC-18 C18 Octadecyl C18 (EC) C18ec
C18-U Bond Elut C18-OH Light LoadOctadecyl
C18 C18
C18-T C18 Bond Elut C18-EWP DSC-18Lt C18ec f
C8 C8 SampliQ C8 OctylBond Elut C8
DSC-8 C8 Octyl C8(EC) C8
Phenyl (PH) SampliQ PhenylBond Elut PH
DSC-Ph Phenyl Phenyl PH
SDB-L SampliQ DVBBond Elut ENVBond Elut LMS
DSC-PS/DVB StyreScreen® DVB H2O-phobic DVB 101 HR-P C6H5
Normal Phase
Si-1 (Silica) Silica SampliQ SilicaBond Elut SI
DSC-Si Silica Silica Gel SI SiOH
FL-PR (Florisil®) Florisil® SampliQ Florisil® PRBond Elut Florisil®
ENVI-Florisil® Florisil® PR Florisil® FL Florisil®
NH2 NH2 SampliQ Amino (NH2)Bond Elut Aminopropyl (NH2)
DSC-NH2 Amino Propyl Amino NH2 NH2
CN CN SampliQ Cyano (CN)Bond Elut Cyano (CN-E)
DSC-CN CN Cyano CN CN
Ion-Exchange
ABW
SAX SampliQ Si-SAXBond Elut SAX
DSC-SAX Quaternary Amine Quaternary Amine SAX SB
SCX SampliQ Si-SCXBond Elut SCX
DSC-SCX Benzene Sulfonic Acid
Aromatic Sulfonic Acid
SCX-3 SA
WCX Bond Elut CBA DSC-WCX Carboxylic Acid Carboxylic Acid CBA PCA
Screen-C SampliQ C8/Si-SCX Mixed ModeBond Elut Certify®
Clean Screen® DAU
Narc™-2 HCX Drug
Screen-C GF Bond Elut Certify® I HF Xtract® DAU
Screen-A Bond Elut Certify® II Clean Screen THC
Narc™-1 HAX
www.phenomenex.com08
Develop Your Method in 3 Easy Steps
Follow Steps 1 through 3 to select the correct sorbent mass, format, and wash and elution volumes for your work.
Sample Matrix Sample Volume Suggested Sorbent Mass
Blood 250 µL 50 mg
Serum 250 µL 50 mg
Plasma 250 µL 50 mg
Urine 500 µL 50 mg
Filtered tissue homogenates 100 mg 100 mg
Water (particulate-free), drinking 100-500 mL 500 mg
Water (particulate-laden), rivers, runoff, etc. 100-500 mL 1 g
Soil extracts 100 g 1 g
Step 1. Choose the correct sorbent mass
Step 2. Choose the correct format
< 1 mL > 96
< 6 mL < 96
> 6 mL
Sample Volume
Traditional SPE Tubes
Number of Samples
96-Well Plates
On-Line Cartridges
Giga™ Tubes
www.phenomenex.com 09
Step 3. Optimize your wash and elution
Sorbent Wash and Elution VolumesThe volume of solvent needed for SPE processing is directly related to the mass of sorbent in the SPE tube, and more specifically, the “bed volume” of the SPE device. Intuitively we know more sorbent requires more solvent, less sorbent = less solvent. Typically, 4 – 16 bed volumes are used in SPE methods.
Silica-Based Sorbent Mass Practical Minimum Wash and Elution Volume 4 bed volumes
Recommended Wash and Elution Volume 8 bed volumes
10 mg 60 µL 120 µL
50 mg 300 µL 600 µL
100 mg 600 µL 1.2 mL
150 mg 900 µL 1.8 mL
200 mg 1.2 mL 2.4 mL
500 mg 3 mL 6 mL
1 g 6 mL 12 mL
2 g 12 mL 24 mL
5 g 30 mL 60 mL
10 g 60 mL 120 mL
www.phenomenex.com10
Start Your Method Now
Phenomenex has designed general starting methods for reversed phase, normal phase, and ion-exchange extractions.
Strata Ion-Exchange Method
for SCX, WCX, SAX, NH2 (WAX) Sorbents
Strata® Reversed Phase Method
for C18, C8, Phenyl, CN, SDB-L Sorbents
Strata Normal Phase Method
for Silica, Florisil®, NH2, CN Sorbents
ANALYTE PROPERTIESIonized/charged compounds
1
SAMPLE/MATRIXAqueous; low ionic strength buffers (<30 mM), pH adjusted
2
CONDITIONING STEP1. Conditioning – polar organic solvents2. Equilibration – low ionic strength buffers, pH adjusted
3
WASH STEPAqueous buffers of low salt concentrations withor without organic solvent
4
ELUTION STEP• Neutralize the charge on the weak anion or cation• Increase the ionic strength and counter ion concentration• Add a strong counter ion displacer• Elute using a polar organic
5
ANALYTE PROPERTIESLow to moderate polarity (or non-polar), hydrophobic, neutralized/uncharged
1
SAMPLE/MATRIXAqueous, diluted with buffer
2
CONDITIONING STEP1. Solvation – polar organic solvents2. Equilibration – aqueous, buffers
3
WASH STEPAqueous buffers with 5 to 50 % polar organic solvent
4
ELUTION STEPPolar or non-polar organic solvent(s) with or without water, buffer and/or strong acid or base
5
ANALYTE PROPERTIESModerate to high polarity compounds (neutralized/uncharged)
1
SAMPLE/MATRIXNon-polar organic solvents or moderately polar organic solvents
2
CONDITIONING STEP1. Solvation – polar organic solvent2. Equilibration – sample/matrix solvent (non-polar)
3
WASH STEPNon-polar organic solvents with a low concentration (1 to 5 %) of moderate to low polarity organic solvents
4
ELUTION STEPNon-polar organic solvents containing higher concentrations (5 to 50 %) of moderate to high polarity organic solvents
5
Suggested Elution Solvents
For complete ionization sample should be adjusted 2 pH units above or below the pKa of analyte. pH can be used to effectively neutralize sorbent or analyte. This can be accomplished by combining 2 % strong acid or base with a water miscible organic solvent such as methanol or acetonitrile. [ As an alternative method, high ionic strength buffer can be used to displace the analyte, which may not be ideal for analysis by sensitive detection instruments such as a mass spec].
Suggested Elution Solvents Polarity
• THF
• Acetone
• Ethyl Acetate
• Acetonitrile**
• Isopropanol
• Methanol
IncreasingPolarity
Polar
** when using aromatic sorbents such as Phenyl or SDB-L, acetonitrile is a stronger elution solvent than methanol **
Suggested Elution Solvents Polarity
• Hexane
• Methylene Chloride
• THF
• Acetone
• Acetonitrile
• Isopropanol
Most Nonpolar
IncreasingPolarity
Polar
Create a Customized SPE Method in Under 1 Minute!
Visit: www.phenomenex.com/info/MDTOOLto use our Online SPE Method Development Tool
www.phenomenex.com 11
Applications Search our Website
Phenomenex has compiled a database of SPE, HPLC, and GC applications and now you have access to it!
Search by the following: • Compound Class
• Technique
• Separation Mode
• Compound Category
• Method
• Pharmacological Effect
View 1,000’s of applications online at:
www.phenomenex.com/application
www.phenomenex.com12
Industry Applications
Environmental
Strata® PAH Provides excellent cleanup and recoveries of polycyclic aromatic hydrocarbons (PAHs) as defined in EPA 550.1 while simultaneously removing humic acids which cause chromatographic interferences.
3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95429 436 444 451 458 465 472 479 486 494 501 508 515 522 529 536 544 551 558 565
0.0
5.0e7
1.0e8
1.5e8
2.0e8
2.5e8
3.0e8
3.5e8
4.0e8
4.5e8
5.0e8
5.5e8
5.8e8
Humic Acids Extract from Strata C18-E
Intensity, cps
min
Humic Acids Extract from Strata-PAH
Effective Removal of Humic Acids
App
ID 1
9662
2
1,2
3
4
5
67
8
9
10
11
1213
19651
1415
16
17 18
19 20
4 6 8 10 12 14 16 18 20 22 24 min
8000000
7000000
6000000
5000000
4000000
3000000
2000000
1000000
Abundance
GC Analysis of Polycyclic Aromatic Hydrocarbons (PAHs)
App
ID 1
9651
Column: Zebron™ ZB-5msDimensions: 30 meter x 0.25 mm x 0.25 μm
Part No.: 7HG-G010-11 Injection: Split 15:1 @ 310 °C, 1 μl
Carrier Gas: Helium @ 1.4 ml/min (constant flow)Oven Program: 140 °C to 240 °C @ 15 °C/min to 275 °C @ 4 °C/min to 320 °C
@ 10 °C/min for 5 minDetector: MS @ 270 °CSample: 1. D8-Naphthalene
2. Naphthalene3. 2-Methylnaphthalene4. Acenaphthalene5. Acenaphthene6. Fluorene7. Anthracene8. Phenanthrene9. Fluoranthene
10. D10-Pyrene
11. Pyrene12. Benz[a]anthracene13. Chrysene14. Benzo[b]fluoranthene15. Benzo[k]fluoranthene16. D12-Benzo[a]pyrene17. Benzo[a]pyrene18. Indeno[1,2,3-cd]pyrene19. Dibenzo[a,h]anthracene20. Benzo[g,h,i]perylene
For More Applications Visit:www.phenomenex.com/application
Strata PAH 1.5 g / 6 mL SPE Tubes (Part Number 8B-S130-7CH)
Condition: - 20 ml Dichloromethane- 20 ml Methanol- 20 ml D.I. Water
Load: - 100 µl PAH standards (100 µg/ml in Acetonitrile) spiked into 100 ml Water/Acetonitrile (75:25)
Wash: - 5 ml Methanol/D.I. Water (50:50)
Dry: - 15 seconds under 10” Hg vacuum
Elute: - 6 ml Dichloromethane
1
2
3
4
5
Strata PAH
Column: Kinetex® 2.6 µm C8Dimensions: 50 x 2.1 mm
Part No.: 00B-4497-AN Mobile Phase: A: 5 mM Ammonium acetate
B: MethanolGradient:
Flow Rate:
Time (min) B (%) 0 15 2 95 6 95 6.01 150.4 ml/min
Temperature: Ambient Detection: MS @ 580.4 amu / 536.5 amu (ambient)
Backpressure: 210 barSample: Humic Acids from Suwannee River
www.phenomenex.com 13
Industry Applications
Environmental
Strata® EPH Specialized SPE sorbent designed to help overcome the challenges associated with traditional silica gel fractionation of aliphatic and aromatic hydrocarbons.
Strata EPH 5 g / 20 mL SPE Tubes, Teflon® (Part Number 8B-S031-LEG-T)
Condition: - 30 ml Hexane
Load: - sample diluted in hexane
Elute Aliphatics: - 11 ml Hexane
Elute Aromatics: - 20 ml Methylene chloride
1
2
3
4
Column: Zebron™ ZB-5msDimensions: 30 meter x 0.32 mm x 0.25 µm
Part No.: 7HM-G010-11 Injection: Splitless @ 285 °C, 2 µl
Carrier Gas: Helium @ 3 ml/min (constant flow)Oven Program: 60 °C for 1 min to 290 °C at 8 °C/min for 6.75 min
Detector: Flame Ionization (FID) @ 315 °CAliphatic Fraction: 1. C9
2. C103. C124. C145. Butylhydroxytoluene6. C167. C188. C199. C20
Aromatic Fraction: 1. Naphthalene2. 2-Methylnaphthalene3. 2-Fluorobiphenyl (frac surr) 4. Acenaphthalene5. 2-Bromonaphthalene (frac surr)6. Acenaphthene7. Phthalate8. Fluorene9. Phenanthrene
10. 5-a-Androstane (IS)11. 1-Chloro-octadecane (surr)12. C2213. C2414. C2615. C2816. C3017. C36
Strata EPH
Figure 1. Representative chromatogram of the aliphatic fraction.
The same running conditions were used to separate the Aliphatic and Aromatic fractions.
Figure 2. Representative chromatogram of the aromatic fraction.
1 2
3
4
5
6
7
8 9 10
11 12
13
14
15
16
17
18
19
20
21
22
23
0 5 10 15 20 25 30 35 min
15788
Ap
p ID
157
88
0 5 10 15 20 25 30 min
1
2
5
6 3 4
7 8 9
10
11
12 13 14 15
16
17
15787
Ap
p ID
157
87
BHT concentration (ppm)
0 10 20 30 40 50 60 70 80
Conventionalsilica-gel
Strata EPH
Aliphatic Fraction Aromatic Fraction
Lower levels of BHT contamination incomparison to conventional silica gelSPE tubes.
Contamination Level of BHT from Strata EPH and Conventional SPE Tubes
GC Analysis of Aliphatic and Aromatic Fractions
10. Anthracene11. 0-Terphenyl (surr)12. 5-a-Androstane13. Fluoranthene14. 1-Chloro-octadecane (surr-aliphatic)15. Pyrene16. Benz[a]anthracene17. Chrysene18. Benzo[b]fluoranthene
19. Benzo[k]fluoranthene20. Benzo[a]pyrene21. Indeno[1,2,3-cd]pyrene22. Dibenz[a,h]anthracene23. Benzo[g,h,i]perylene
www.phenomenex.com14
1. Add 1 mL of sample (spiked with Internal Standard, IS), 100 µL of 0.2 N HCl, and 3 mL of Acetonitrile to centrifuge tube2. Vortex and centrifuge at 6000 rpm for 10 min3. Collect the supernatant for Strata Melamine cleanup
Protein Precipitation
Sorbent: Strata Melamine, 200 mg/ 3 mL tubePart No.: 8B-S049-FBJ
Condition: 1) 3 mL Methanol @ 1 mL/min 2) 3 mL Acetonitrile/Water (50:50) @ 1 mL/min
Load: Collected supernatant from centrifugation step in protein precipitation prior to SPE
Wash 1: Wash 2:
1 mL Acetonitrile/Water (50:50); 2x 500 µL 500 µL Methanol/Water (50:50)
Dry: 2 min at 10" of HgElute: 1) 500 µL Methanol
2) 2x 500 µL 5 % Ammonium hydroxide in Methanol
Strata Melamine Cleanup
100 -
90 -
80 -
70 -
60 -
50 -
40 -
30 -
20 -
10 -
0 -
% Recovery
Cya
nu
ric
Ac
id
94.5
%
Me
lam
ine
11
5 %
Greater than 90 % Recoveries
Column: luna® 3 µm HIlICDimensions: 100 x 2.0 mm
Part No.: 00D-4449-B0Mobile Phase: A: Acetonitrile
B: 100 mM Ammonium formate pH 3.2 A/B (90:10)
Flow Rate: 0.4 ml/minDetection: Mass Spectrometer (MS)
Sample: 1. Cyanuric acid (-ve)2. Melamine (+ve)
Column: Zebron™ ZB-XlB-HT InfernoDimensions: 15 meter x 0.25 mm x 0.25 µm
Part No.: 7EG-G024-11Injection: on-Column @ 103 °C, 1 µl
Carrier Gas: Helium @ 1.4 ml/min (constant flow) Oven Program: 100 °C for 0.5 min to 320 °C @ 25 °C/min
Detector: Mass Selective (MSD) @ 325 °CSample: Analytes are 200 ng / 100 µl in BSTFA / Pyridine (1:1)
1. Cyanuric Acid 13C3 (IS) 2. Cyanuric Acid3. Melamine 13C3 15N3 (IS) 4. Melamine
0.20 0.4 0.6 0.8 1.0 1.2 1.4 1.6
1
1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 min
218287
Ap
p ID
182
87
Cyanuric Acid Melamine
MS switched from -ve mode to +ve mode
LC analysis on baby formula extraction
3 42
1,2
3,4
18265
5 6 7 8 9 min
Ap
p ID
182
65
GC analysis on baby formula extraction
Industry Applications
Food and Beverage
Strata® Melamine
Simultaneously extract melamine and cyanuric acid from food samples, using one SPE sorbent.
www.phenomenex.com 15
Column: luna® 3 µm HIlICDimensions: 100 x 2.0 mm
Part No.: 00D-4449-B0Mobile Phase: A: Acetonitrile
B: 100 mM Ammonium formate pH 3.2 A/B (90:10)
Flow Rate: 0.4 ml/minDetection: Mass Spectrometer (MS)
Sample: 1. Cyanuric acid (-ve)2. Melamine (+ve)
Column: Zebron™ ZB-XlB-HT InfernoDimensions: 15 meter x 0.25 mm x 0.25 µm
Part No.: 7EG-G024-11Injection: on-Column @ 103 °C, 1 µl
Carrier Gas: Helium @ 1.4 ml/min (constant flow) Oven Program: 100 °C for 0.5 min to 320 °C @ 25 °C/min
Detector: Mass Selective (MSD) @ 325 °CSample: Analytes are 200 ng / 100 µl in BSTFA / Pyridine (1:1)
1. Cyanuric Acid 13C3 (IS) 2. Cyanuric Acid3. Melamine 13C3 15N3 (IS) 4. Melamine
Strata Silica (Si-1) 200 mg/3 mLPart No.: 8B-S012-FBJ
Strata Florisil 500 mg/3 mLPart No.: 8B-S013-HBJ
LC/MS/MS Chromatogram of Aflatoxin Standards at 50 ppb
0.5 1.0
1 2
3
4 5Counts
1.5 2.0 2.5 3.0 min 4.0 min0
100
200
300
400
500
600
700
800
900
1000
1100
1200
13001377
Ap
p ID
186
42
Column: Kinetex® 2.6 μm PFPDimensions: 50 x 2.1 mm
Part No.: 00B-4477-ANMobile Phase: A: 0.1 % Formic acid and 5 mM Ammonium acetate
in Water B: 0.1 % Formic acid and 5 mM Ammonium acetate in Methanol
Gradient: Time (min) B (%) 0 50 0.25 50 2 70 2.01 95 2.5 95 2.51 50 4.4 50
Flow Rate: 400 µl/minTemperature: 25 °C
Detection: Mass Spectrometer (MS)Sample: 1. Aflotoxins M1(IS)
2. Aflotoxins G23. Aflotoxins G14. Aflotoxins B25. Aflotoxins B1
Industry Applications
Food and Beverage
Strata® Si-1 (silica) and FL-PR (Florisil®)
A two-stage SPE procedure is effective in removing detector interfering contaminants from a peanut butter matrix while maintaining absolute recoveries of aflatoxins above 80 %.
Condition: 2 x 3 mL of hexane
Load: 2 mL of reconstituted sample from the Strata Florisil
Wash: 1. 2 x 2 mL of methanol/chloroform (1:1) 2. 1 x 1 mL of methanol/chloroform (1:1)
Load and wash solutions from the silica SPE were pooled together and dried down under nitrogen and reconstituted in 500 µL of the mobile phase used for LC/UV or LC/MS analysis
Pretreatment: To 5 g of peanut butter, add 40 mL Methanol/Water (80:20) containing 0.2 g of sodium chloride. Mechanically stir for 2 hours. Filter residual solids with a Whatman filter paper and rinse 3x with 5 mL Methanol. Dry extracts over anhydrous magnesium sulfate, dry solvent under Nitrogen at 45°C and reconstitute in 500 µL Methanol/Water (80:20).
Load: A 1.5 mL aliquot of peanut butter extract was spiked with aflatoxin standards and loaded
Condition: No conditioning was performed as this led to reduced recoveries of aflatoxins
Wash: 1. 2 x 3 mL of methanol/water (80:20)
2. 2 x 3 mL of 100 % methanol
Elute: 2 x 3 mL of acetone/water/0.5 % formic acid (96:3.5:0.5)
The combined eluate was dried under nitrogen and the residue reconstituted in 2 mL of 1:1 hexane/chloroform and loaded onto the Strata Silica cartridge for further cleanup
www.phenomenex.com16
Ordering Information
For Flash Analysis• Wide range of polar and non-polar
selectivities
• Gram to kilogram quantities
For On-line Screening• 1-3 minute run time
• Direct inject analysis
For Traditional Sample Preparation
• Compatible with most manifolds and robotic workstations
• Consistent well-to-well and tube-to-tube flow
For Large Scale Cleanup• Available in 12, 20, 60, and 150 mL
volume tube sizes
• Pre-packed formats eliminate excess labor associated with glass packed columns
www.phenomenex.com 17
Additional sizes and sorbent masses available. For a complete list of Strata SPE products visit: www.phenomenex.com/sampleprep
Strata CN (can also be used for Normal Phase)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S007-EAK 1 mL (100/Box) 200 mg 8B-S007-FBJ 3 mL (50/Box) 500 mg 8B-S007-HBJ 3 mL (50/Box) 500 mg 8B-S007-HCH 6 mL (30/Box)1 g 8B-S007-JCH 6 mL (30/Box)Giga Tube2 g 8B-S007-KDG 12 mL (20/Box) 96-Well Plate50 mg 8E-S007-DGB 2 Plates/Box100 mg 8E-S007-EGB 2 Plates/Box
Strata® C18-ESorbent Mass Part No. Unit/BoxTube50 mg 8B-S001-DAK 1 mL (100/Box) 100 mg 8B-S001-EAK 1 mL (100/Box) 100 mg 8B-S001-EBJ 3 mL (50/Box) 200 mg 8B-S001-FBJ 3 mL (50/Box) 200 mg 8B-S001-FCH 6 mL (30/Box)500 mg 8B-S001-HBJ 3 mL (50/Box) 500 mg 8B-S001-HCH 6 mL (30/Box)Giga™ Tube500 mg 8B-S001-HDG 12 mL (20/Box)2 g 8B-S001-KDG 12 mL (20/Box)5 g 8B-S001-LEG 20 mL (20/Box)10 g 8B-S001-MFF 60 mL (16/Box)20 g 8B-S001-VFF 60 mL (16/Box)50 g 8B-S001-YSN 150 mL (8/Box)70 g 8B-S001-ZSN 150 mL (8/Box)96-Well Plate25 mg 8E-S001-CGB 2 Plates/Box50 mg 8E-S001-DGB 2 Plates/Box100 mg 8E-S001-EGB 2 Plates/Box
On-Line Extraction Cartridge
Description Part No.Unit/Box
Strata C18 on-line extraction cartridge, 20 x 2.0 mm
00M-S039-B0-CB
ea
Cartridge holder, 20 mm
CH0-5845 ea
Strata C8Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S005-EAK 1 mL (100/Box) 200 mg 8B-S005-FBJ 3 mL (50/Box) 500 mg 8B-S005-HBJ 3 mL (50/Box) 500 mg 8B-S005-HCH 6 mL (30/Box)1 g 8B-S005-JCH 6 mL (30/Box)Giga Tube2 g 8B-S005-KDG 12 mL (20/Box)5 g 8B-S005-LEG 20 mL (20/Box)10 g 8B-S005-MFF 60 mL (16/Box)96-Well Plate25 mg 8E-S005-CGB 2 Plates/Box50 mg 8E-S005-DGB 2 Plates/Box100 mg 8E-S005-EGB 2 Plates/Box
On-Line Extraction Cartridge
Description Part No.Unit/Box
Strata C8 on-line extraction cartridge, 20 x 2.0 mm
00M-S101-B0-CB
ea
Cartridge holder, 20 mm
CH0-5845 ea
Strata C18-USorbent Mass Part No. Unit/BoxTube100 mg 8B-S002-EAK 1 mL (100/Box) 200 mg 8B-S002-FBJ 3 mL (50/Box) 500 mg 8B-S002-HBJ 3 mL (50/Box) 1 g 8B-S002-JCH 6 mL (30/Box) 96-Well Plate50 mg 8E-S002-DGB 2 Plates/Box100 mg 8E-S002-EGB 2 Plates/Box
Strata PhenylSorbent Mass Part No. Unit/BoxTube100 mg 8B-S006-EAK 1 mL (100/Box) 200 mg 8B-S006-FBJ 3 mL (50/Box) 500 mg 8B-S006-HBJ 3 mL (50/Box) 500 mg 8B-S006-HCH 6 mL (30/Box) 1 g 8B-S006-JCH 6 mL (30/Box) 96-Well Plate25 mg 8E-S006-CGB 2 Plates/Box50 mg 8E-S006-DGB 2 Plates/Box100 mg 8E-S006-EGB 2 Plates/Box
Strata SDB-LSorbent Mass Part No. Unit/BoxTube100 mg 8B-S014-EAK 1 mL (100/Box) 200 mg 8B-S014-FBJ 3 mL (50/Box) 200 mg 8B-S014-FCH 6 mL (30/Box) 500 mg 8B-S014-HBJ 3 mL (50/Box) 500 mg 8B-S014-HCH 6 mL (30/Box)1 g 8B-S014-JCH 6 mL (30/Box)Giga Tube2 g 8B-S014-MFF 60 mL (16/Box) 96-Well Plate50 mg 8E-S014-DGB 2 Plates/Box
Strata C18-T (wide pore)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S004-EAK 1 mL (100/Box) 200 mg 8B-S004-FBJ 3 mL (50/Box) 500 mg 8B-S004-HBJ 3 mL (50/Box) 500 mg 8B-S004-HCH 6 mL (30/Box)1 g 8B-S004-JCH 6 mL (30/Box)96-Well Plate25 mg 8E-S004-CGB 2 Plates/Box50 mg 8E-S004-DGB 2 Plates/Box
Reversed Phase
18 www.phenomenex.com
Strata Screen-C (mixed-mode cation-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S016-EAK 1 mL (100/Box) 100 mg 8B-S016-EBJ 3 mL (50/Box) 150 mg 8B-S016-SBJ 6 mL (30/Box) 150 mg 8B-S016-SCH 6 mL (30/Box)200 mg 8B-S016-FBJ 3 mL (50/Box) 300 mg 8B-S016-RBJ 3 mL (50/Box) 500 mg 8B-S016-HCH 6 mL (30/Box)
Strata® NH2 / WAX (can also be used for anion-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S009-EAK 1 mL (100/Box) 200 mg 8B-S009-FBJ 3 mL (50/Box) 500 mg 8B-S009-HBJ 3 mL (50/Box) 500 mg 8B-S009-HCH 6 mL (30/Box)1 g 8B-S009-JCH 6 mL (30/Box)Giga™ Tube500 mg 8B-S009-HDG 12 mL (20/Box)2 g 8B-S009-KDG 12 mL (20/Box)5 g 8B-S009-LEG 20 mL (20/Box)10 g 8B-S009-MFF 60 mL (16/Box)20 g 8B-S009-VFF 60 mL (16/Box)96-Well Plate25 mg 8E-S009-CGB 2 Plates/Box50 mg 8E-S009-DGB 2 Plates/Box100 mg 8E-S009-EGB 2 Plates/Box
Normal PhaseStrata WCX (weak cation-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S027-EAK 1 mL (100/Box) 200 mg 8B-S027-FBJ 3 mL (50/Box) 500 mg 8B-S027-HBJ 3 mL (50/Box) 500 mg 8B-S027-HCH 6 mL (30/Box)1 g 8B-S027-JCH 6 mL (30/Box)Giga Tube2 g 8B-S027-KDG 12 mL (20/Box)5 g 8B-S027-LEG 20 mL (20/Box)10 g 8B-S027-MFF 6 mL (16/Box)96-Well Plate25 mg 8E-S027-CGB 2 Plates/Box50 mg 8E-S027-DGB 2 Plates/Box100 mg 8E-S027-EGB 2 Plates/Box
Cation-Exchange
Strata Silica
(Si-1)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S012-EAK 1 mL (100/Box) 200 mg 8B-S012-FBJ 3 mL (50/Box) 500 mg 8B-S012-HBJ 3 mL (50/Box) 500 mg 8B-S012-HCH 6 mL (30/Box)1 g 8B-S012-JCH 6 mL (30/Box)Giga Tube500 mg 8B-S012-HDG 12 mL (20/Box)1 g 8B-S012-JDG 12 mL (20/Box)2 g 8B-S012-KDG 12 mL (20/Box)5 g 8B-S012-LEG 20 mL (20/Box)10 g 8B-S012-MFF 60 mL (16/Box)20 g 8B-S012-VFF 60 mL (16/Box)50 g 8B-S012-YSN 150 mL (8/Box)70 g 8B-S012-ZSN 150 mL (8/Box)96-Well Plate50 mg 8E-S012-DGB 2 Plates/Box100 mg 8E-S012-EGB 2 Plates/Box
Strata Florisil®
(pesticide residue grade)
Sorbent Mass Part No. Unit/BoxTube500 mg 8B-S013-HBJ 3 mL (50/Box) 500 mg 8B-S013-HCH 6 mL (30/Box)1g 8B-S013-JCH 6 mL (30/Box)Giga Tube1 g 8B-S013-JEG 20 mL (20/Box)2 g 8B-S013-KDG 12 mL (20/Box)5 g 8B-S013-LEG 20 mL (20/Box)10 g 8B-S013-MFF 60 mL (16/Box)
Strata CN(See under Reversed Phase for ordering information)
Strata SCX (strong cation-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S010-EAK 1 mL (100/Box) 100 mg 8B-S010-EBJ 3 mL (50/Box) 200 mg 8B-S010-FBJ 3 mL (50/Box) 500 mg 8B-S010-HBJ 3 mL (50/Box) 500 mg 8B-S010-HCH 6 mL (30/Box)1 g 8B-S010-JCH 6 mL (30/Box)Giga Tube2 g 8B-S010-KDG 12 mL (20/Box)5 g 8B-S010-LEG 20 mL (20/Box)10 g 8B-S010-MFF 60 mL (16/Box)20 g 8B-S010-VFF 60 mL (16/Box)96-Well Plate25 mg 8E-S010-CGB 2 Plates/Box50 mg 8E-S010-DGB 2 Plates/Box100 mg 8E-S010-EGB 2 Plates/Box
Ordering Information
www.phenomenex.com 19
Terms and Conditions Subject to Phenomenex Standard Terms and Conditions, which may be viewed at www.phenomenex.com/TermsAndConditions
Trademarks Strata, Kinetex, and Luna are registered trademarks of Phenomenex. Zebron, Giga and Sepra are trademarks of Phenomenex. Agilent, Bond Elut, Bond Elut Certify, and SampliQ are registered trademarks of Agilent Technolo-gies. Waters and Sep-Pak are registered trademarks of Waters Corp. Varian is a trademark of Varian, Inc. Sigma-Aldrich and Discovery are registered trade-marks of Sigma-Aldrich, Inc. UCT, StyreScreen, Clean Screen and Xtract are registered trademarks of United Chemical Technologies. JT BAKER and POLAR PLUS are registered trademarks of Avantor Performance Materials. Narc is a trademark of Avantor Performance Materials. Biotage, IST and Isolute are registered trademarks of Biotage. Macherey-Nagel and CHROMABOND are regis-tered trademarks of Macherey-Nagel GmbH & Co. Florisil is a registered trademark of U.S. Silica Co. Teflon is a registered trademark of E.I. du Pont de Nemours and Co.
Disclaimer Comparative separations may not be representative of all applications.
Phenomenex is not affiliated with Waters Corp., Agilent, Varian, Inc., Sigma-Aldrich, Inc., United Chemical Technologies, Avantor Performance Materials, Biotage, Macherey-Nagel GmbH & Co., or U.S. Silica Co.
© 2013 Phenomenex, Inc. All rights reserved.
If Phenomenex products in this brochure do not provide at least an equivalent separation as compared to other products of the same phase and comparable dimensions, return the product with your comparative data within 45 days for a Full REFuND.
Additional sizes and sorbent masses available. For a complete list of Strata SPE products visit: www.phenomenex.com/sampleprep
Strata EPH
Sorbent Mass Part No. Unit/BoxTube500 mg 8B-S031-HBJ 3 mL (50/Box) Giga Tube5 g 8B-S031-LEG 20 mL (20/Box)Teflon Giga Tube5 g 8B-S031-LEG-T 20 mL (20/Box)
Strata Alumina-N (AL-N)
Sorbent Mass Part No. Unit/BoxTube500 mg 8B-S313-HBJ 3 mL (50/Box) 1 g 8B-S313-JCH 6 mL (30/Box)Giga Tube2 g 8B-S313-KDG 12 mL (20/Box)
MelamineSorbent Mass Part No. Unit/BoxTube100 mg 8B-S049-EBJ 3 mL (50/Box) 200 mg 8B-S049-FBJ 6 mL (30/Box)96-Well Plate50 mg 8E-S049-DGB 2 Plates/box
Sodium SulfateSorbent Mass Part No. Unit/BoxTube1 g 8B-S124-JCH 6 mL (30/Box) Giga Tube1 g 8B-S124-JEG 20 mL (20/Box)5 g 8B-S124-LEG 20 mL (20/Box)
Strata Eco-ScreenSorbent Mass Part No. Unit/BoxTube1 g 8B-S046-JBJ 3 mL (50/Box)
Strata PAH (Polycyclic Aromatic Hydrocarbons)Sorbent Mass Part No. Unit/BoxTube750 mg 8B-S130-WCH 6 mL (30/Box)1.5 g 8B-S130-7CH 6 mL (30/Box)
Speciality Phases
Strata ABW (specialty phase)
Sorbent Mass Part No. Unit/BoxTube1 g 8B-S030-JCH 6 mL (30/Box)Giga Tube2 g 8B-S030-KDG 12 mL (20/Box)5 g 8B-S030-LEG 20 mL (20/Box)10 g 8B-S030-MFF 60 mL (16/Box)20 g 8B-S030-VFF 60 mL (16/Box)
Strata Screen-A (mixed-mode anion-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S019-EAK 1 mL (100/Box) 200 mg 8B-S019-FBJ 3 mL (50/Box) 200 mg 8B-S019-FCH 6 mL (30/Box) 500 mg 8B-S019-HCH 6 mL (30/Box)96-Well Plate25 mg 8E-S019-CGB 2 Plates/Box
Anion-ExchangeStrata® SAX (strong anion-exchange)
Sorbent Mass Part No. Unit/BoxTube100 mg 8B-S008-EAK 1 mL (100/Box) 100 mg 8B-S008-EBJ 3 mL (50/Box) 200 mg 8B-S008-FBJ 3 mL (50/Box) 500 mg 8B-S008-HBJ 3 mL (50/Box) 500 mg 8B-S008-HCH 6 mL (30/Box)1 g 8B-S008-JCH 6 mL (30/Box)Giga™ Tube500 mg 8B-S008-HDG 12 mL (20/Box)2 g 8B-S008-KDG 12 mL (20/Box)5 g 8B-S008-LEG 20 mL (20/Box)10 g 8B-S008-MFF 60 mL (16/Box)20 g 8B-S008-VFF 60 mL (16/Box)96-Well Plate25 mg 8E-S008-CGB 2 Plates/Box50 mg 8E-S008-DGB 2 Plates/Box100 mg 8E-S008-EGB 2 Plates/Box
Strata NH2 / WAX(See under Normal Phase for ordering information)
www.phenomenex.comPhenomenex products are available worldwide. For the distributor in your country, contact Phenomenex USA, International Department at [email protected]
t: f:
Australia02-9428-6444 02-9428-6445 [email protected]
t: f:
Austria 01-319-1301 01-319-1300 [email protected]
t: t: f:
Belgium02 503 4015 (French) 02 511 8666 (Dutch) +31 (0)30-2383749 [email protected]
t: f:
Canada(800) 543-3681 (310) 328-7768 [email protected]
t: f:
Denmark4824 8048 +45 4810 6265 [email protected]
t: f:
Finland09 4789 0063 +45 4810 6265 [email protected]
t: f:
France01 30 09 21 10 01 30 09 21 11 [email protected]
t: f:
Germany 06021-58830-0 06021-58830-11 [email protected]
t: f:
India 040-3012 2400 040-3012 2411 [email protected]
t: f:
Ireland 01 247 5405 +44 1625-501796 [email protected]
t: f:
Italy 051 6327511 051 6327555 [email protected]
t: f:
Luxembourg+31 (0)30-2418700 +31 (0)30-2383749 [email protected]
t: f:
Mexico001-800-844-5226 001-310-328-7768 [email protected]
t: f:
The Netherlands030-2418700 030-2383749 [email protected]
t: f:
New Zealand09-4780951 09-4780952 [email protected]
t: f:
Norway 810 02 005 +45 4810 6265 [email protected]
t: f:
Puerto Rico (800) 541-HPLC (310) 328-7768 [email protected]
t: f:
Sweden 08 611 6950 +45 4810 6265 [email protected]
t: f:
United Kingdom 01625-501367 01625-501796 [email protected]
t: f:
United States(310) 212-0555 (310) 328-7768 [email protected]
t: f:
All other countries: Corporate Office USA (310) 212-0555 (310) 328-7768 [email protected]
BR
8710
0213
_W
Top Related