Pullers are tools used to remove pieces that were press-fitted when assembled. Vises and c-clamps allow the user to fasten two or more items to work on them. For example, machinery, internal combustion engines, transmissions, and at the woodworking, heavy, and oil industries. The majority of these tools have a threaded shaft; and straight, internal and external, fixed, adjustable and reversible jaws, forged for greater resistance.
Pullers, vises and c-clamps are particularly useful in applications where the pieces are press-fitted or if their operation requires pulleys, bearings, or bushings. They are also useful with power transmission devices like automobile engines, internal machinery parts, structures, industrial installations, and similar applications. This makes URREA pullers, vises and c-clamps indispensable tools in industry and for automotive servicing.
There are also specialized pullers mainly for automotive servicing, to install or remove pulleys, gears, pitman arms from vehicle steering, bearings, and bushings, among others.
The pullers, vises, and c-clamps presented in this chapter are classified as extraction and fastening tools because they are designed to extract and fasten pieces that by design were required to be press-fitted. Made of different materials and available in different sizes, there are jaw pullers, pulley pullers, steering wheel pullers, adjustable pullers, reversible pullers, gear and bearing separators, workbench vises, c-clamps, and much more.
URREA pullers, vises and c-clamps:
• Are a great line of products with more than 95 extraction and fastening tools.
- Adjustable, reversible, fixed and separators. - Steel c-clamps and jaws, internal and external jaws. - Capacity in tons. - From 2 to 10 tons.
• Great variety of designs, sizes, and materials.
• Manufactured with hot forged steel.
• Workbench vises made of heat-treated malleable iron, precision machined to offer the best combination of hardness, endurance, and resistance to high pressure.
• Workbench vise jaw pads have machined teeth for more reliable clamping.
• All URREA extraction tools have a resistant nickel-chrome plating. Vises and c-clamps have a paint coating preventing corrosion.
• They meet national and international, American and European, standards.
• The quality image of these products is reinforced by an indelible and permanent mark showing the country of origin.
The information in this chapter is organized as follows:
• Technical standards.• Detailed product specifications.• Recommended uses.
& C-CLAMPSPULLERS, VISES
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PULLERS
GEAR AND BEARING SEPARATORS
PULLERS FOR AUTOMOTIVE PARTS
NUT, BOLT, AND PIPE EXTRACTORS
WORKBENCH VISES
PRECISION VISES AND C-CLAMPS
541
547
547
550
551
552
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
538
TECHNICAL STANDARDS URREA manufactures
its tools following technical standards.
A product technical standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or government bodies and associations.
The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards.
In the United States there are various associations that issue or used to issue standards, such as GSA/US FEDERAL and ASME.
Hand tool standards known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI.
Nowadays, ASME hand tool standards are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME.
Pullers are tools used to remove items that were press-fitted when assembled like pulleys, bearings, bushings, etc. Vises and c-clamps allow
the user to fasten two or more items so they can be worked on.
Pullers, vises, and c-clamps are manufactured with high-quality alloy steel. They undergo a heat treatment process in controlled atmosphere furnaces so they attain high resistance.
The technical specifications followed to design and make pullers, vises, and c-clamps are based on technical standards like those issued by ASME/ANSI and GSA/US FEDERAL.
URREA offers pullers with a wide range of load capabilities, from 2 to 10 tons, as well as vises and c-clamps with openings from 2" up to 12".
GGG-P-643 A “Specification puller kit, mechanical”GGG-P-0078IC “Puller attachment, Mechanical, and puller set, mechanical”GGG-P-78ID “Puller, mechanical, puller, attachment, and puller set mechanical”GGG-V-410A “Vise, bench, clamp base; sheet metal works; bench and pipe; jeweler’s machinist’s and multiposition”GGG-V-412A “Vise; hand; pin; Wire pope splicing; and square end sawing, tube”GGG-V-415A “Vise, pipe”
B107.46M “stud, screw, and pipe extractors: safety requirements”B107.52M “Nail Puller Bars: Safety Requirements”
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
539SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
There are 3 basic extraction problems. Start by identifying the type of extraction problem at hand.
The following illustrations showcase the three most common cases:
NEED DESCRIPTION APPLICATION TOOL REQUIRED
PULL(SEPARATE)SOMETHINGFROM A SHAFT
PULLSOMETHINGFROM (OUT OF) A HOLE
PULL(OUT)A SHAFT
Removal of gears, bearings, pulleys, etc.To replace or take another part.
Extraction of internal bear-ing lids.Press fit oil retainers or seals are a good example.
Transmission drive shafts or sprockets.
*2 or 3 jaw puller*Side hammer puller*Combination of jaw puller and bearing separator
*Jaw puller with 2 or 3 revers-ible jaws.*Slide hammer puller with internal accessories.
*Slide hammer puller*Combination of jaw puller and bearing separator
Once the extraction problem has been identified you can select the puller that will meet those needs. For best results and greater safety, it is especially important to use the appropriate tool to tackle the problem. To select the appropriate extraction tool you need to:
1. Select the extraction tool or required combination.2. Determine the required reach (A). - The selected puller must have a reach equal to or greater than what you estimate necessary for removal of the item.3. Determine the spread (B) the item will require. - The item's width will determine the spread required.4. Consider the jaw's thickness (C) and width (D).5. Estimate the force required. A puller with the right reach and spread has to be strong enough for the job. However, it is always recommended to use a
puller with a spread and reach greater than those of the item that will be removed, especially when the part is rough or when the "resistance area" is big, since greater force might be required.
Manual extraction tools require that the puller's screw moves smoothly and that the item's reach and spread are known. These measurements have to be compared with those specified for each URREA puller presented in this chapter.
MOST COMMON PULLERS
SPECIFICATIONS AND STANDARDS
STRAIGHT JAW PULLER PERFORMANCE TEST
Our pullers are designed to support more than their nominal capacity when subjected to tension. Our 10 ton puller has a 14.8 ton average resistance.
TRACTION DEVICE 10 TON PULLER RESISTANCE TEST
10.0 11.5 13.0 14.5 16.0 17.5 19.0
RESULTS
Lower Spec Upper Spec
Ton.
AB
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
540
These pullers are commonly used for automotive repairs and for performing machinery maintenance. They can be extended using the holes and slots on each jaw.
Straight jaw pullers are more versatile because it is possible to combine different types of jaws on the puller's head. The following table shows the variety of URREA pullers, a small description of each part, and their respective codes and available components.
STRAIGHT JAW PULLERCHARACTERISTICS
FORCING SCREW: Threaded shaft with floating tip. This screw exerts the extraction force.
HEAD: Puller's body onto which the jaws and forcing screw are mounted.
CLIP: Die-cut and hardened metal clips hold the jaws to the puller's body.
SHORT JAW: For general purpose applications with no space, maneuverability or reach restrictions.
DOUBLE REACH JAWS: For deep applications, when the shaft of the piece being removed is long.
NARROW JAW: the jaw's toe is narrower, allowing an excellent grip in confined areas.
SCREW HEAD JAW: The jaw's tip is slotted so screws can be fastened by the head and pulled.
CASES
-1-1-1-1-1-
HEAD
11111111111
METALCLIPS
64444442222
FORCING SCREWS
11111111111
SHORT JAWS
32222----22
CODE
42164212SJB4212SJ4030B40304234B42344238B42384232SJB4232SJ
DOUBLE REACH JAWS
32222222222
NARROW JAWS
3222222----
SCREW HEAD JAW
3 22222222--
1 2 3 4 5 6 7 8
TOTAL PIECES
201414141412128888
TONS
666
1010101010101010
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
541SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13For extracting different diameters of pulleys.Forcing screw with sharp, reinforced tip.Forged head of high-resistance steel, 3-way 4216.6-ton strength.
4216 SPECIFICATIONS
MAXIMUM JAW
REACH
SCREW'S
EXPOSED
LENGTH
E
JAWS'
MAXIMUM
SPREAD
F
HEAD
HEIGHT
G
6-TON STRAIGHT JAW PULLERS
20-PIECE SET
DESCRIPTION3-way headClipsForcing screwsShort jawsLong jawsNarrow jawsScrew head jaws
QTY.1613333
42166-TON STRAIGHT JAW PULLER,
3-WAY, 12 JAWS,NO BOX
A B C Din.
1 1/8in.6
in.4 5/8
in.2 5/8
in.5 7/16
in.4
in.5 1/2
mm28.58
mm152.4
mm117.4
mm66.68
mm138
mm101.6
mm139
gm3,500
lb.7.71
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
These pullers are mainly for the automotive industry where parts like pulleys, gears, and large sprockets are used in assembly lines, making their extraction easier and safer.
Forged head made of high-resistance steel.
Treated steel forcing screw; features a hex head that can be turned with socket and ratchet. Has a floating tip that exerts the extraction force.
Die-cut and hardened metal clip holds the jaws to the puller's body.
Interchangeable and adjustable jaws, great for different types of extractions.
4216
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
SCREW EXTRACTORS
PREC. VISES & C-CLAMPS
PULLERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
542
SPARE PARTS FOR 6-TON STRAIGHT JAW PULLERS
DESCRIPTIONCODE
4215Q4216Q4217Q4218Q
Short jaw 4” reachLong jaw 5 1/2” reach
Angular jaw 5 7/16” reachScrew head jaw 2 5/8” reach
4211S
4212
4215Q
4211
4211HEAD FOR 6-TON PULLER
lb.1.020739
gm463
LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS
in.7 3/8
in.1 1/8
in.1 1/8
mm187.33
mm28.58
mm28.58
tons6
SAE5132M
HRC36-40
4211SJAW SAFETY CLIP FOR 6-TON PULLER
lb.0.01056
gm4.79
LENGTH HEIGHT WIDTH CALIBRE HARDNESSMATERIAL
in.7/8
in.5/8
in.13/32
mm22.225
mm15.88
mm10.31
mm0.64
in.0.025
HRC35-401075
#24
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS
4212FORCING SCREW FOR 6-TON PULLER
lb.0.4762
gm216
LENGTH DIAMETER & THREAD
HEXAGON CAPACITY
in.7 7/8 9/16-12UNC-2A
in.5/8
mm200.03
mm15.88
tons6
MATERIAL HARDNESS
SAE5132M
HRC42-46
6-TON STRAIGHT JAW PULLERS
For extracting different diameters of pulleys.Forcing screw with sharp, reinforced tip.Forged head of high-resistance steel, 2-way 4212SJ.6-ton strength.
4212SJB4212SJ
WITH METAL BOXWITH OUT METAL BOX
14-PIECE SET
DESCRIPTIONHeadClipsForcing screwShort jawsLong jawsNarrow jawsScrew head jawsMetal box (code 4219)
QTY.14122221
6-TON PULLER 2-WAY, 6 JAW
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
4212SJB AND 4212SJ SET CONTENTS
4216SJB, 4121SJ SPECIFICATIONS
MAXIMUM JAW
REACH
SCREW'S
EXPOSED
LENGTH
E
JAWS'
MAXIMUM
SPREAD
F
HEAD
HEIGHT
GA B C Din.
1 1/8in.6
in.4 5/8
in.2 5/8
in.5 7/16
in.4
in.5 1/2
mm28.58
mm152.4
mm117.4
mm66.68
mm138
mm101.6
mm139
gm2,650
lb.5.84
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
543SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
4030B, 4030 SPECIFICATIONS
CODE
4030B4030
JAW MAXIMUM REACH
A B C D
gm3,8003,800
lb.14.9914.99
HEAD HEIGHT
G
in.1 5/81 5/8
mm41.341.3
JAW'S MAXIMUM SPREAD
F
in.1010
mm254254
SCREW'S EXPOSED LENGTH
E
in.8 9/168 9/16
mm217.5217.5
in.33
mm76.276.2
in.4 23/324 23/32
mm119.9119.9
in.77
mm177.8177.8
in.7 9/327 9/32
mm184.9184.9
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS
4030BWITH METAL BOX
4234B, 4234 SPECIFICATIONS
CODE
4234B4234
JAW MAXIMUM REACH
A B C
SCREW'S EXPOSED DISTANCE
D
JAW'S MAXIMUM SPREAD
E
HEAD HEIGHT
Fgm
5,1004,540
lb.11.2410.01
in.33
mm76.276.2
in.77
mm177.8177.8
in.7 9/327 9/32
mm184.9184.9
in.8 9/168 9/16
mm217.5217.5
in.1010
mm254254
in.1 5/81 5/8
mm41.341.3
4234BWITH METAL BOX
4234WITH OUT METAL BOX
10-TON STRAIGHT JAW PULLERS
4238B, 4238 SPECIFICATIONS
CODE
4238B4238
JAW MAXIMUM REACH
A B gm
4,2003,650
lb.9.268.05
in.33
mm76.276.2
in.7 9/327 9/32
mm184.9184.9
SCREW'S EXPOSED DISTANCE
Cin.
8 9/168 9/16
mm217.5217.5
JAWS MAXIMUM SPREAD
Din.1010
mm254254
HEAD HEIGHT
Ein.
1 5/81 5/8
mm41.341.3
4238BWITH METAL BOX
4238WITH OUT METAL BOX
4030WITH OUT METAL BOX
14-PIECE SET
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
DESCRIPTIONHeadClipsForcing screwShort jawsDouble reach jawsNarrow jawsScrew head jawsMetal box (code 4019)
QTY.14122221
10-TON PULLERS2-WAY, 8 JAWS
4030B AND 4030 SET CONTENTS
DESCRIPTIONHeadClipsForcing screwDouble reach jawsNarrow jawsScrew head jawsMetal box (code 4019)
QTY.1412221
10-TON PULLERS2-WAY, 6 JAWS
12-PIECE SET
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
4234B AND 4234 SET CONTENTS
DESCRIPTIONHeadClipsForcing screwDouble reach jawsScrew head jawsMetal box (code 4019)
QTY.121221
10-TON PULLERS2-WAY, 4 JAWS
8-PIECE SET
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
4238B AND 4238 SET CONTENTS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
544
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS
4232SJBWITH METAL BOX
4232SJWITH OUT METAL BOX
4232SJB, 4232SJ SPECIFICATIONS
CODE
4232SJB4232SJ
JAW MAXIMUM REACH
A B gm
5,2005,200
lb.11.4611.46
in.4 23/324 23/32
mm119.9119.9
in.7 9/327 9/32
mm184.9184.9
SCREW'S EXPOSED DISTANCE
Cin.
8 9/168 9/16
mm217.5217.5
JAW'S MAXIMUM SPREAD
Din.1010
mm254254
HEAD HEIGHT
Ein.
1 5/81 5/8
mm41.341.3
SPARE PARTS FOR 10-TON STRAIGHT JAW PULLERS
DESCRIPTIONCODE
4015401640174018
Short jaw 4 11/16” reachDouble jaw 4 11/16” reachAngular jaw 7 3/16” reach
Screw head jaw 2 15/16” reach
4011S
4012S
4015
4011
4011HEAD FOR 10-TON PULLER
lb.2,799867
gm1270
LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS
in.11
in.1 5/8
in.1 5/8
mm279.4
mm41.27
mm41.27
tons10
SAE5132M
HRC36-40
4011SJAW SAFETY CLIP FOR 10-TON PULLER
lb.0.01446
gm6.56
LENGTH HEIGHT WIDTH CALIBRE HARDNESSMATERIAL
in.1 3/16
in.3/4
in.1/2
mm30.16
mm19.05
mm12.7
mm0.64
in.0.025
HRC35-401075
#24
4012SFORCING SCREW FOR 10-TON PULLER
lb.1.0802
gm490
LENGTH DIAMETER & THREAD
HEXAGON CAPACITY
in.10 9/16 3/4-10UNC-2A
in.3/4
mm268.27
mm19.05
tons10
MATERIAL HARDNESS
SAE5132M
HRC42-46
10-TON STRAIGHT JAW PULLERS
DESCRIPTIONHeadClipForcing screwShort jawDouble reach jawMetal box (code 4019)
QTY.121221
10-TON PULLERS2-WAY, 4 JAWS
8-PIECE SET
ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781
4232SJB AND 4232SJ SET CONTENTS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
545SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
REVERSIBLE JAW PULLERS These pullers feature an self fastening system, making them ideal for countless jobs.
It is important to select the tool that will fasten as strongly as possible to the piece being pulled. The decision between a puller with two or three jaws depends on the piece that will be removed and its location. However, whenever space allows it we recommend the use of a 3-jaw puller because its fastening points are better and the force is better distributed when pulling.
4033 4034
4044 4046
Adjustable jaw pullers feature a wider spread than their straight jaw counterparts.In addition, they can reach places that straight jaw pullers are unable to.
ADJUSTABLE ADJUSTABLE STRAIGHT STRAIGHT
Available puller types:2 Adjustable Jaws (A)2 Reversible Jaws (A)3 Adjustable Jaws (B)2/3 Combination Jaws (C)
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS
TYPE
ABAACC
POSSIBLESPREAD
in.44697
10
REACH
in.3 1/23 1/23 1/25 1/23 1/25 1/2
CAPACITY
tons225757
MINIMUM TEST LOAD
lb.2,5002,5008,0008,0008,0008,000
CODE
403340344044404540464047
STANDARD: FEDERAL GGG-P-781
Adjustable puller
DESCRIPTION
2-way adjustable
JAW TYPE
2
NUMBER OF
JAWS
SPREAD CAPACITY
REACH
2
CAPACITYTONS
B
A
A
gm415
lb.0.91
2-JAW PULLER WITH 2 POSITIONS
4033
in.4
mm101.6
mm88.90
in.3 1/2
(A)
(A)
For pulling different diameter pulleys.
STANDARD: FEDERAL GGG-P-781
Adjustable puller
DESCRIPTION
3-way adjustable
JAW TYPE
3
NUMBER OF
JAWS
SPREAD CAPACITY
B
CAPACITYTONS
gm750
lb.1.65
3-JAW PULLER WITH 2 POSITIONS
4034
in.4
mm101.6
mm88.90 2
in.3 1/2
(B)
(B)
Pulls pulleys with different diameters.
STANDARD: FEDERAL GGG-P-781
2-JAW PULLER
40444045
Reversible pullerReversible puller
DESCRIPTION
ReversibleReversible
JAW TYPE
22
NUMBER OF
JAWS
57
CAPACITYTONS
CODE SPREAD CAPACITY
in.69
mm152.40228.60
mm88.90139.7
REACH
in.3 1/25 1/2
gm893
1,865
lb.1.974.11
B
A
A
(A)
STANDARD: FEDERAL GGG-P-781
2- OR 3-JAW PULLER
40464047
Reversible pullerReversible puller
DESCRIPTION
ReversibleReversible
JAW TYPE
2 or 32 or 3
NUMBER OF
JAWS
57
CAPACITYTONS
CODE
710
SPREAD CAPACITY
B
in.3 1/25 1/2
REACH
A
in. gm.1,2552,664
lb.2.775.87
(C)
(C)
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
546
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS
SLIDE HAMMER PULLERS Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws.
T-handle provides better control.
Sliding hammer extracts by blows delivered to the adjusting cone.
Micro-alloy steel jaws are heat-treated for greater resistance to traction.
Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly.
4270A
6 TON HAMMER PULLER, INTERCHANGEABLE TIPS
4277
CIRCULAR SCREW RANGE
4 1/2” to 5 1/2”
ACCESSORIES:5 lb. hammer5/8"-18" Bar with 22" strokeExtracts lugs and components in transmission driveshafts
PULLS
ITS DESIGN ALLOWS USE IN AXLES WITH 4, 5, OR 6 LUGS IN A CIRCLE
STANDARD: FEDERAL GGG-P-781
gm4,250
lb.9.37
4277
4285
6-TON, 2- OR 3-WAY HAMMER PULLER WITH 3 ACCESSORIES
EXTERNAL CAPACITY
INTERNAL CAPACITY
JAWS SHAFT LENGTH
JAWS' TOE REACH
DISTANCE
in.22 7/1622 7/16
in.2 15/162 15/16
in.5 1/25 5/16
in.4 5/165 5/16
in.1 31/3225/32
in.1 3/8
1 31/32
mm570570
mm74.6174.61
mm140135
mm110135
mm5020
mm3550
23
HammerMax.Max. Min.Min. Total Wt.
STANDARD: FEDERAL GGG-P-781
gm4,2504,250
gm2,2682,268
lb.9.379.37
lb.5.005.00
4270A
6-TON 3-WAY HAMMER PULLER
EXTERNAL CAPACITY
INTERNAL CAPACITY
JAWS SHAFT LENGTH
JAWS' TOE REACH
DISTANCE
in.22 7/16
in.1 7/8
in.4 1/2
in.4 1/4
in.1 1/2
in.1 1/2
mm570
mm47.63
mm114.30
mm107.75
mm38.10
mm38.103
HammerMax.Max. Min.Min. Total Wt.
STANDARD: FEDERAL GGG-P-781
gm.3,200
gm.2,268
lb.7.05
lb.5.00
Adjusting coneapplies constant pressure.
4285
ACCESSORIES:A hook jaw that removes gears, bushings, fasteners, and bearing tracks.A jaw that pulls generator and starter bearings.A bar that pulls pulleys and gears with threaded holes.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
547SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
GEAR AND BEARING SEPARATORS Gear and bearing separators are designed to remove generator gears and tapered bearings. Their design allows them to reach in places where jaw pullers cannot. The fastening angle of their internal faces helps hold onto and remove bearings without any damage. It is very easy to place it behind the piece needing adjustment or removal and this ensures a good grip, even if the available space is narrow.
CODE FORCING SCREWSLENGTH
CAPACITY
4331433243334334
in.4.845.2010.0013.00
mm123132
254.0330.2
MAX.mm
57.15114.30149.23200.03
in.2 1/44 1/25 7/87 7/8
MIN.in.
1 1/43
3 7/85 7/8
mm31.7576.2098.43149.23
HOLE THREADTYPE
M 10 x 2.412 M x 20
3/4” - 16 NF1” - 12 NF
M 10 x 2.412 M x 20
3/4 - 16 NF1 - 12 NF
GEAR AND BEARING SEPARATORS
STANDARDS: FEDERAL GGG-P-781
PULLERS, VISES AND C-CLAMPS
TOTAL PIECES
27
PIECES
3333322311121
CONTENTS
3/8” - 16” x 4” bolt3/8” - 24” x 2” bolt5/16” - 18” x 2” boltM8 x 1.25 x 80 mm boltM10 - 1.50 x 50 mm bolt1/4” - 28” x 3” bolt5/16” - 24” x 3 1/2” bolt5/16” - 18” x 4 1/2” bolt5/8” x 5” center bolt (pointed) 5/8” x 6 1/2” center bolt (pointed)YokeRotating capsPlastic box
* Packaged in plastic tray
gm2,015
lb.4.44
HARMONIC BALANCER PULLER SET
4205A 27-PIECE SET
Forcing screw made of micro-alloy steel, offering a perfect fit onto the object being removed.
Adjusting nut controls base separation.
Separating base adjusts to pieces where a conventional puller cannot reach.
4205A
The forcing screw is designed to create strong pushing force so the object being removed comes loose.
Fastening screws are made of heat-treated steel.
HARMONIC BALANCER PULLERS This set contains all the necessary accessories to remove steering wheels from domestic and foreign vehicles, as well as from light
SUV's. It is also useful to pull out things such as bearings, gears, and pulleys. Made of steel. Universal design fits a great variety of removable pieces.
SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
PULLERS GEAR/BEARING SEPARATORS
AUTOMOTIVE PULLERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
548
HARMONIC BALANCER PULLERS
PITMAN ARM PULLER FOR SMALL VEHICLES
4051
DESCRIPTION
Light duty PITMAN arm puller
USE
Small vehicles
CAPACITYOPENING EXTRACTION
gm448
lb.0.99
in.1 1/16
in.1 3/4
mm27
mm45
4050
GOATLEG PULLEY PULLER
4053
MIN.OPENING
MAX.OPENING
REACH
mm35
mm45
mm65
in.1 3/8
in.1 3/4
in.2 9/16
lb.2.43
gm1,100
Extracts pulleys with one or two grooves from alternators and starters.
This tool set removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines, (a common problem). The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder.
40534052
4051
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
PULLERS SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
AUTOMOTIVE PULLERS
4205
HARMONIC BALANCER PULLER SET
4205
PIECES
323331
111
CONTENTS
3/8” - 16” x 4” bolt3/8” - 24” x 2” bolt5/16” - 18” x 2” boltM8 x 1.25 x 80 mm boltM10 - 1.50 x 50 mm bolt5/8” x 5” center bolt (pointed)YokeTightening capPlastic box
gm1,500
lb.3.31
17-PIECE SET
HARMONIC DAMPER PULLEY PULLER
4050
PIECES
3
11
11
CONTENTS
Forcing rods, sizes 5/16” x 4”, 5/16” x 5 7/16” and 5/16” x 7 7/16”.3-jaw puller.Harmonic balancer holding tool.Forcing screw.Plastic box.
lb.3.31
gm1,500
6-PIECE SET
BROKEN PLUG REMOVER FOR FORD 3 VALVE
UEXBT
PIECES
111111
CONTENTS
Pusher body.Pusher screw.Tip.Puller housing.Puller screw.Left hand hex nut.
lb.1.76
gm800
6-PIECE KIT
* Packaged in plastic case
PITMAN ARM PULLER FOR LARGE VEHICLES AND TRUCKS
4052
DESCRIPTION
Heavy duty PITMAN arm puller
USE
Largevehicles
gm950
lb.2.09
CAPACITYOPENING EXTRACTIONin.
1 5/16in.
2 1/2mm33
mm64
Extracts steering assembly pitman arms.
UEXBT
Set Includes a Unique Porcelain Pusher Tool.
Porcelain pusher is used to press the porcelain piece, without breaking the porcelain, farther into the plug tip. This provides space for the left hand thread remover to bite into the stainless steel plug tip so it can then be pulled.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
549SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
SCREW BOLT AND PIPE EXTRACTORS Puller sockets are designed to easily remove damaged, stripped, or corroded nuts. They can be used on lugs, nuts, bolts, pipe unions, etc. Simply place the puller on the nut that needs to be removed and apply torque with a ratchet, impact bar, air wrench, etc.
• Includesstandardpunch.• Removesthemostcommonhexnuts.• 6-flutedesignfitsperfectlyonhexnuts.
• Foruseonthemostcommerciallugnuts.• Thedriveislocatedinthemiddleofthesocket.
74HLR
PULLERS, VISES AND C-CLAMPS
GEAR/BEARING SEPARATORS
PULLERS SCREW EXTRACTORS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
AUTOMOTIVE PULLERS
End with twist opening
End with hex opening
WHEEL LOCK REMOVAL KIT
74HLR
PIECES
3122
111111
CONTENTS
Hubcap locking lug nut removers.Hubcap locking lug nut remover.Chrysler, Ford and GM lug lock removers.7/8" and 3/8" removers for large and damaged lug locks.Large after-market locking lug nut remover.GM wheel locking lug nut removerExtractor punch.18 mm smooth nut remover.3" Extension.Plastic box
Lb4.850
Kg2.2
13-PIECE KIT
TWIST SOCKET SET3/8" DRIVE
7200S
SIZESDRIVE
in.3/8
mm9.5 9/16, 15 mm, 5/8-16 mm, 17 mm,
11/16, 3/4-19 mm, 3/8, 10 mm, 7/6-11 mm, 12 mm, 13 mm, 14 mm
lb.2.43
gm1,100
14-PIECE KIT
Extractor punchPlastic box
1/2"
3/8"
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
550
PULLERS, VISES AND C-CLAMPS
AUTOMOTIVE PULLERS
WORKBENCH VISES
PREC. VISES & C-CLAMPS
GEAR/BEARING SEPARATORS
PULLERS SCREW EXTRACTORS
STRAIGHT FLUTE PIPE EXTRACTORS
CODE
95219522952395249525
PIPE DIAMETERin. mm
1/8 3.11/8 3.11/8 3.11/4 6.33/8 9.5
ASME / ANSI B107.46M
TIP WIDTH
1/8 3.111/64 4.313/64 5.119/64 7.511/32 8.7
in. mm
3/16 4.73/16 4.71/4” 6.35/16 7.93/8 9.5
BUTT END WIDTH
in. mm
LENGTH
2 5/16 47.02 5/8 57.02 7/8 64.03 73.03 1/4 81.0
in. mm gm
9.09.018.131.749.8
0.020.020.040.070.11
lb.
950019521
FLIP LUG NUT SOCKET SET 1/2" DRIVE
7400SWL
SIZESDRIVE
in.1/2
mm12.7 17 mm, 3/4"-19 mm, 13/16", 21 mm, 7/8",
1/2"-3" extensionPlastic box
6-PIECE SET
7400SVW
STRAIGHT FLUTE EXTRACTOR SET
9500A
TYPE
Straight flute
CONTENTS
1/8” to 3/8” pipe extractorsVinyl pouch
ASME / ANSI B107.46M
5-PIECE SET
9500A
7400SWL
5-PIECE SETSPIRAL FLUTE SCREW EXTRACTOR SET
9500B
TYPE
Spiral flute
CONTENTS
1/8” to 3/4” screw extractorsVinyl pouch
ASME / ANSI B107.46M
NUTS, BOLTS AND PIPE PULLERS
SPIRAL FLUTE SCREW EXTRACTORS
CODE
9500195002950039500495005
DESCRIPTION
1/8” to 1/4”1/4” to 5/16”5/16” to 7/16”7/16” to 9/16”9/16” to 3/4”
HOLE SIZE
in. mm
5/64 2.07/64 2.85/32 4.07/32 5.617/64 6.8
SCREW/NUT SIZE
in. mm
1/8-1/4 3.2-6.31/4-5/16 6.3-7.95/16-7/16 7.9-11.17/16-9/16 11.1-14.39/16-3/4 14.3-19.0
LENGTH
1 27/32 47.02 1/4 57.02 1/2 64.02 7/8 73.03 3/16 81.0
in. mm gm
26122247
lb.0.000.010.030.050.10
ASME / ANSI B107.46M
1/2" DRIVE FLIP LUG NUT SOCKET SET WITH EXTENSION
7400SVW
SIZESDRIVE
in.1/2
mm12.7 17 mm, 19 mm, 1/2"-3" extension
pouch
3-PIECE SET
9500B
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
551SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
WORKBENCH VISES
WORKBENCH VISES
STANDARD: FEDERAL GGG-V-410B
CODE
424425426427
JAW WIDTH
Ain.4567
mm101.6127.0152.4177.8
MAX. OPENING
Bin.46
7 1/210
mm101.6152.4190.5254.0
in.7 7/89 1/210 5/8
11 13/16
mm200.0241.3269.9300.0
HEIGHT
Cin.
15 3/420 5/6423 1/3224 13/16
mm400.0510.0585.0630.2
TOTAL LENGTH
Lgm
21,00032,50044,50058,000
lb.46.371.798.1127.9
Robust and reinforced, they are ideal for heavy-duty work. The jaws are made of tempered steel and the U-shaped guide is made of steel, providing greater resistance while protecting the screw and bronze nut. The dismountable jaws hold circular pieces better. The base swivels 360 degrees.
Sliding handle applies optimal torque onto the clamped piece.
Dismountable tempered steel jaws
U-shaped steel guide protects the screw and bronze nuts.
L
A
B
C
SWIVEL BASE
SCREW EXTRACTORS
AUTOMOTIVE PULLERS
GEAR/BEARING SEPARATORS
PULLERS SCREW EXTRACTORS
AUTOMOTIVE PULLERS
PREC. VISES & C-CLAMPS
GEAR/BEARING SEPARATORS
WORKBENCH VISES
PULLERS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
552
PULLERS, VISES AND C-CLAMPS
SCREW EXTRACTORS
AUTOMOTIVE PULLERS
GEAR/BEARING SEPARATORS
WORKBENCH VISES PRECISION VISES
& C-CLAMPS
PULLERS
Bottom groove guide on the base for precision installation on workbench.
PRECISION MILLING VISES2 AXES
STANDARD: FEDERAL GGG-V-410B
CODE
4520245203452044520545206
in.1/29/169/1611/1611/16
in.1
1 5/161 1/21 3/41 3/4
in.23456
in.23456
in.1/4 x 201/4 x 201/4 x 205/16 x 185/16 x 18
mm12.7014.2914.2917.4617.46
mm2534384545
mm50
76.2101.6127
152.4
mm50
76.2101.6127
152.4
mm6.35 x 5086.35 x 5086.35 x 5087.94 x 4577.94 x 457
BOTTOM GROOVE
JAW DEPTH
JAW OPENING
JAW WIDTH
THREAD
gm3,5009,35017,00029,45042,800
lb.7,7220,6137,4864,9394,36
PRECISION MILLING VISES1 AXIS
STANDARD: FEDERAL GGG-V-410B
CODE
45103451044510545106
in.9/169/1611/1611/16
in.1 5/161 1/21 3/41 3/4
in.3456
in.3456
in.1/4 x 201/4 x 205/16 x 185/16 x 18
mm14.2914.2917.4617.46
mm34384545
mm76.2101.6127
152.4
mm76.2101.6127
152.4
mm6.35 x 5086.35 x 5087.94 x 4577.94 x 457
BOTTOM GROOVE
JAW DEPTH
JAW OPENING
JAW WIDTH
THREAD
gm9,35017,00029,00038,800
lb.20.6137.4863.9385.53
PRECISION MILLING VISES3 AXES
STANDARD: FEDERAL GGG-V-410B
CODE
4530545306
in.11/1611/16
in.1 3/41 3/4
in.56
in.56
in.5/16 x 185/16 x 18
mm17.4617.46
mm4545
mm127
152.4
mm127
152.4
mm7.94 x 4577.94 x 457
BOTTOM GROOVE
JAW DEPTH
JAW OPENING
JAW WIDTH
THREAD
gm36,00054,000
lb.79,37119.00
Hardened jaws (53 to 59 HRc). Squareness and parallelism precise to within 0.0012" (30 microns).
Precision vises are casted of high-tension, close-grained cast steel. They have a scratch- and rust-proof gray polychromatic finish.
Ergonomic steel crank handle minimizes user effort. Spring-loaded ball detent allows quick and better attachment.
High-precision threaded screw provides the optimal tightening mechanism for firm clamping and smooth operation.
These precision vises use high grade bolts, providing greater strength and rigidity.
Bolt holes provide great anchoring points on workbenches.
Base squareness and parallelism precise to within 0.0012" (30 microns).
360 degree graduated swivel base. Graduation in 1 degree increments.
45104
PRECISION MILLING VISES
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
553SUPERIOR QUALITY AFFORDABLE TOOLS
& C-CLAMPS
PULLERS, VISES
13
412PRO
412
C-CLAMPS Heavy-duty c-clamps are forged in high-quality alloy steel. Their highly engineered proportions perform better on resistance tests. Screws
with ACME rolling threads provide more strength and smooth operation. These heavy-duty c-clamps allow greater precision, better performance and high efficiency.
These deep-throated forged body c-clamps are ideal for safely fastening pieces so you can work on them. Mainly used for welding and soldering, in workshops or for industrial purposes.
Deeper throats
They feature a large diameter
screw, a comfortable
sliding T-handle and ACME thread
that makes turning easy.
Reinforced corners.
PULLERS, VISES AND C-CLAMPS
SCREW EXTRACTORS
AUTOMOTIVE PULLERS
GEAR/BEARING SEPARATORS
WORKBENCH VISES
PULLERS
Design provides greater reach and throat depth.
ASME / ANSI B107.46M, FEDERAL GGG-C-4060
DEEP THROAT C-CLAMPSFORGED BODY
402403404406408410412
mm120.65146.05193.67247.01314.25314.25342.9
in.4 3/45 3/47 5/89 7/812 3/812 3/813 1/2
lb.3,3003,5004,1005,4005,9006,2009,300
mm12.712.719.119.119.119.122.2
in.1/21/23/43/43/43/47/8
mm50.860.369.966.7114.3136.5146.1
in.2
2 3/82 3/43 5/84 1/25 3/85 3/4
A BC D
gm600850
1,4502,1833,4504,7506,100
lb.1.321.873.204.817.6110.4713.45
CODE SCREW LENGTH
B
SCREW DIAMETER
C
THROAT DEPTH
D
CAPACITY
A
MAXIMUM CAPACITY
in.0 - 20 - 30 - 40 - 60 - 80 - 100 - 12
mm0 - 50.80 - 76.20 - 101.60 - 152.40 - 203.20 - 254.00 - 304.8
PRECISION VISES & C-CLAMPS
HEAVY-DUTY FORGED C-CLAMPS
CODE
404PRO406PRO408PRO410PRO412PRO
mm155
198.4240.5329.8360
in.6 1/8
7 13/169 15/3212 63/6414 11/64
SCREWLENGTH
B
mm15.822.225.425.428.5
in.5/87/811
1 1/8
SCREWDIAMETER
C
mm50.869.896124130
lb.3,357,6311,7916,3423,84
in.2
2 3/43 3/44 7/85 1/8
THROAT DEPTH
D
CAPACITY
A
in.0 - 40 - 60 - 80 - 100 - 12
mm0 - 101.60 - 152.40 - 203.20 - 254.00 - 304.8
MAXIMUM CAPACITY
lb.8,52010,77111,20911,41116,559
gm1,2502,8504,4006,1008,900
ASME / ANSI B107.46M, FEDERAL C-4060
A BC
D
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Top Related