PULLERS, VISES C-CLAMPS - mdmetric.commdmetric.com/prod/upt/537_upt13cat.pdf · B107.46M “stud,...

Pullers are tools used to remove pieces that were press-fitted when assembled. Vises and c-clamps allow the user to fasten two or more items to work on them. For example, machinery, internal combustion engines, transmissions, and at the woodworking, heavy, and oil industries. The majority of these tools have a threaded shaft; and straight, internal and external, fixed, adjustable and reversible jaws, forged for greater resistance.

Pullers, vises and c-clamps are particularly useful in applications where the pieces are press-fitted or if their operation requires pulleys, bearings, or bushings. They are also useful with power transmission devices like automobile engines, internal machinery parts, structures, industrial installations, and similar applications. This makes URREA pullers, vises and c-clamps indispensable tools in industry and for automotive servicing.

There are also specialized pullers mainly for automotive servicing, to install or remove pulleys, gears, pitman arms from vehicle steering, bearings, and bushings, among others.

The pullers, vises, and c-clamps presented in this chapter are classified as extraction and fastening tools because they are designed to extract and fasten pieces that by design were required to be press-fitted. Made of different materials and available in different sizes, there are jaw pullers, pulley pullers, steering wheel pullers, adjustable pullers, reversible pullers, gear and bearing separators, workbench vises, c-clamps, and much more.

URREA pullers, vises and c-clamps:

• Are a great line of products with more than 95 extraction and fastening tools.

- Adjustable, reversible, fixed and separators. - Steel c-clamps and jaws, internal and external jaws. - Capacity in tons. - From 2 to 10 tons.

• Great variety of designs, sizes, and materials.

• Manufactured with hot forged steel.

• Workbench vises made of heat-treated malleable iron, precision machined to offer the best combination of hardness, endurance, and resistance to high pressure.

• Workbench vise jaw pads have machined teeth for more reliable clamping.

• All URREA extraction tools have a resistant nickel-chrome plating. Vises and c-clamps have a paint coating preventing corrosion.

• They meet national and international, American and European, standards.

• The quality image of these products is reinforced by an indelible and permanent mark showing the country of origin.

The information in this chapter is organized as follows:

• Technical standards.• Detailed product specifications.• Recommended uses.

& C-CLAMPSPULLERS, VISES

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: [email protected] RFQ form: http://mdmetric.com/rfq.htm How to order Urrea Tools: R629-part number example: R629-5212M

Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

PULLERS

GEAR AND BEARING SEPARATORS

PULLERS FOR AUTOMOTIVE PARTS

NUT, BOLT, AND PIPE EXTRACTORS

WORKBENCH VISES

PRECISION VISES AND C-CLAMPS

541

547

547

550

551

552



538

TECHNICAL STANDARDS URREA manufactures

its tools following technical standards.

A product technical standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or government bodies and associations.

The only organization to issue international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related to quality systems, although it also issues product technical standards.

In the United States there are various associations that issue or used to issue standards, such as GSA/US FEDERAL and ASME.

Hand tool standards known as Federal (in Mexico) are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI.

Nowadays, ASME hand tool standards are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME.

Pullers are tools used to remove items that were press-fitted when assembled like pulleys, bearings, bushings, etc. Vises and c-clamps allow

the user to fasten two or more items so they can be worked on.

Pullers, vises, and c-clamps are manufactured with high-quality alloy steel. They undergo a heat treatment process in controlled atmosphere furnaces so they attain high resistance.

The technical specifications followed to design and make pullers, vises, and c-clamps are based on technical standards like those issued by ASME/ANSI and GSA/US FEDERAL.

URREA offers pullers with a wide range of load capabilities, from 2 to 10 tons, as well as vises and c-clamps with openings from 2" up to 12".

GGG-P-643 A “Specification puller kit, mechanical”GGG-P-0078IC “Puller attachment, Mechanical, and puller set, mechanical”GGG-P-78ID “Puller, mechanical, puller, attachment, and puller set mechanical”GGG-V-410A “Vise, bench, clamp base; sheet metal works; bench and pipe; jeweler’s machinist’s and multiposition”GGG-V-412A “Vise; hand; pin; Wire pope splicing; and square end sawing, tube”GGG-V-415A “Vise, pipe”

B107.46M “stud, screw, and pipe extractors: safety requirements”B107.52M “Nail Puller Bars: Safety Requirements”



539SUPERIOR QUALITY AFFORDABLE TOOLS

& C-CLAMPS

PULLERS, VISES

13

There are 3 basic extraction problems. Start by identifying the type of extraction problem at hand.

The following illustrations showcase the three most common cases:

NEED DESCRIPTION APPLICATION TOOL REQUIRED

PULL(SEPARATE)SOMETHINGFROM A SHAFT

PULLSOMETHINGFROM (OUT OF) A HOLE

PULL(OUT)A SHAFT

Removal of gears, bearings, pulleys, etc.To replace or take another part.

Extraction of internal bear-ing lids.Press fit oil retainers or seals are a good example.

Transmission drive shafts or sprockets.

*2 or 3 jaw puller*Side hammer puller*Combination of jaw puller and bearing separator

*Jaw puller with 2 or 3 revers-ible jaws.*Slide hammer puller with internal accessories.

*Slide hammer puller*Combination of jaw puller and bearing separator

Once the extraction problem has been identified you can select the puller that will meet those needs. For best results and greater safety, it is especially important to use the appropriate tool to tackle the problem. To select the appropriate extraction tool you need to:

1. Select the extraction tool or required combination.2. Determine the required reach (A). - The selected puller must have a reach equal to or greater than what you estimate necessary for removal of the item.3. Determine the spread (B) the item will require. - The item's width will determine the spread required.4. Consider the jaw's thickness (C) and width (D).5. Estimate the force required. A puller with the right reach and spread has to be strong enough for the job. However, it is always recommended to use a

puller with a spread and reach greater than those of the item that will be removed, especially when the part is rough or when the "resistance area" is big, since greater force might be required.

Manual extraction tools require that the puller's screw moves smoothly and that the item's reach and spread are known. These measurements have to be compared with those specified for each URREA puller presented in this chapter.

MOST COMMON PULLERS

SPECIFICATIONS AND STANDARDS

STRAIGHT JAW PULLER PERFORMANCE TEST

Our pullers are designed to support more than their nominal capacity when subjected to tension. Our 10 ton puller has a 14.8 ton average resistance.

TRACTION DEVICE 10 TON PULLER RESISTANCE TEST

10.0 11.5 13.0 14.5 16.0 17.5 19.0

RESULTS

Lower Spec Upper Spec

Ton.

AB



540

These pullers are commonly used for automotive repairs and for performing machinery maintenance. They can be extended using the holes and slots on each jaw.

Straight jaw pullers are more versatile because it is possible to combine different types of jaws on the puller's head. The following table shows the variety of URREA pullers, a small description of each part, and their respective codes and available components.

STRAIGHT JAW PULLERCHARACTERISTICS

FORCING SCREW: Threaded shaft with floating tip. This screw exerts the extraction force.

HEAD: Puller's body onto which the jaws and forcing screw are mounted.

CLIP: Die-cut and hardened metal clips hold the jaws to the puller's body.

SHORT JAW: For general purpose applications with no space, maneuverability or reach restrictions.

DOUBLE REACH JAWS: For deep applications, when the shaft of the piece being removed is long.

NARROW JAW: the jaw's toe is narrower, allowing an excellent grip in confined areas.

SCREW HEAD JAW: The jaw's tip is slotted so screws can be fastened by the head and pulled.

CASES

-1-1-1-1-1-

HEAD

11111111111

METALCLIPS

64444442222

FORCING SCREWS

11111111111

SHORT JAWS

32222----22

CODE

42164212SJB4212SJ4030B40304234B42344238B42384232SJB4232SJ

DOUBLE REACH JAWS

32222222222

NARROW JAWS

3222222----

SCREW HEAD JAW

3 22222222--

1 2 3 4 5 6 7 8

TOTAL PIECES

201414141412128888

TONS

666

1010101010101010




& C-CLAMPS

PULLERS, VISES

13For extracting different diameters of pulleys.Forcing screw with sharp, reinforced tip.Forged head of high-resistance steel, 3-way 4216.6-ton strength.

4216 SPECIFICATIONS

MAXIMUM JAW

REACH

SCREW'S

EXPOSED

LENGTH

E

JAWS'

MAXIMUM

SPREAD

F

HEAD

HEIGHT

G

6-TON STRAIGHT JAW PULLERS

20-PIECE SET

DESCRIPTION3-way headClipsForcing screwsShort jawsLong jawsNarrow jawsScrew head jaws

QTY.1613333

42166-TON STRAIGHT JAW PULLER,

3-WAY, 12 JAWS,NO BOX

A B C Din.

1 1/8in.6

in.4 5/8

in.2 5/8

in.5 7/16

in.4

in.5 1/2

mm28.58

mm152.4

mm117.4

mm66.68

mm138

mm101.6

mm139

gm3,500

lb.7.71

ASME / ANSI B107.46M, ASME / ANSI B107.52M, FEDERAL GGG-P-781

These pullers are mainly for the automotive industry where parts like pulleys, gears, and large sprockets are used in assembly lines, making their extraction easier and safer.

Forged head made of high-resistance steel.

Treated steel forcing screw; features a hex head that can be turned with socket and ratchet. Has a floating tip that exerts the extraction force.

Die-cut and hardened metal clip holds the jaws to the puller's body.

Interchangeable and adjustable jaws, great for different types of extractions.

4216

PULLERS, VISES AND C-CLAMPS

GEAR/BEARING SEPARATORS

SCREW EXTRACTORS

PREC. VISES & C-CLAMPS

PULLERS



542

SPARE PARTS FOR 6-TON STRAIGHT JAW PULLERS

DESCRIPTIONCODE

4215Q4216Q4217Q4218Q

Short jaw 4” reachLong jaw 5 1/2” reach

Angular jaw 5 7/16” reachScrew head jaw 2 5/8” reach

4211S

4212

4215Q

4211

4211HEAD FOR 6-TON PULLER

lb.1.020739

gm463

LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS

in.7 3/8

in.1 1/8

in.1 1/8

mm187.33

mm28.58

mm28.58

tons6

SAE5132M

HRC36-40

4211SJAW SAFETY CLIP FOR 6-TON PULLER

lb.0.01056

gm4.79

LENGTH HEIGHT WIDTH CALIBRE HARDNESSMATERIAL

in.7/8

in.5/8

in.13/32

mm22.225

mm15.88

mm10.31

mm0.64

in.0.025

HRC35-401075

#24



AUTOMOTIVE PULLERS

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS

4212FORCING SCREW FOR 6-TON PULLER

lb.0.4762

gm216

LENGTH DIAMETER & THREAD

HEXAGON CAPACITY

in.7 7/8 9/16-12UNC-2A

in.5/8

mm200.03

mm15.88

tons6

MATERIAL HARDNESS

SAE5132M

HRC42-46


For extracting different diameters of pulleys.Forcing screw with sharp, reinforced tip.Forged head of high-resistance steel, 2-way 4212SJ.6-ton strength.

4212SJB4212SJ

WITH METAL BOXWITH OUT METAL BOX

14-PIECE SET

DESCRIPTIONHeadClipsForcing screwShort jawsLong jawsNarrow jawsScrew head jawsMetal box (code 4219)

QTY.14122221

6-TON PULLER 2-WAY, 6 JAW


4212SJB AND 4212SJ SET CONTENTS

4216SJB, 4121SJ SPECIFICATIONS

MAXIMUM JAW

REACH

SCREW'S

EXPOSED

LENGTH

E

JAWS'

MAXIMUM

SPREAD

F

HEAD

HEIGHT

GA B C Din.

1 1/8in.6

in.4 5/8

in.2 5/8

in.5 7/16

in.4

in.5 1/2

mm28.58

mm152.4

mm117.4

mm66.68

mm138

mm101.6

mm139

gm2,650

lb.5.84




& C-CLAMPS

PULLERS, VISES

13

4030B, 4030 SPECIFICATIONS

CODE

4030B4030

JAW MAXIMUM REACH

A B C D

gm3,8003,800

lb.14.9914.99

HEAD HEIGHT

G

in.1 5/81 5/8

mm41.341.3

JAW'S MAXIMUM SPREAD

F

in.1010

mm254254

SCREW'S EXPOSED LENGTH

E

in.8 9/168 9/16

mm217.5217.5

in.33

mm76.276.2

in.4 23/324 23/32

mm119.9119.9

in.77

mm177.8177.8

in.7 9/327 9/32

mm184.9184.9



AUTOMOTIVE PULLERS

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS

4030BWITH METAL BOX


CODE

4234B4234

JAW MAXIMUM REACH

A B C

SCREW'S EXPOSED DISTANCE

D


E

HEAD HEIGHT

Fgm

5,1004,540

lb.11.2410.01

in.33

mm76.276.2

in.77

mm177.8177.8

in.7 9/327 9/32

mm184.9184.9

in.8 9/168 9/16

mm217.5217.5

in.1010

mm254254

in.1 5/81 5/8

mm41.341.3

4234BWITH METAL BOX

4234WITH OUT METAL BOX



CODE

4238B4238

JAW MAXIMUM REACH

A B gm

4,2003,650

lb.9.268.05

in.33

mm76.276.2

in.7 9/327 9/32

mm184.9184.9


Cin.

8 9/168 9/16

mm217.5217.5

JAWS MAXIMUM SPREAD

Din.1010

mm254254

HEAD HEIGHT

Ein.

1 5/81 5/8

mm41.341.3

4238BWITH METAL BOX



14-PIECE SET


DESCRIPTIONHeadClipsForcing screwShort jawsDouble reach jawsNarrow jawsScrew head jawsMetal box (code 4019)

QTY.14122221

10-TON PULLERS2-WAY, 8 JAWS

4030B AND 4030 SET CONTENTS

DESCRIPTIONHeadClipsForcing screwDouble reach jawsNarrow jawsScrew head jawsMetal box (code 4019)

QTY.1412221


12-PIECE SET



DESCRIPTIONHeadClipsForcing screwDouble reach jawsScrew head jawsMetal box (code 4019)

QTY.121221


8-PIECE SET





544



AUTOMOTIVE PULLERS

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS

4232SJBWITH METAL BOX

4232SJWITH OUT METAL BOX

4232SJB, 4232SJ SPECIFICATIONS

CODE

4232SJB4232SJ

JAW MAXIMUM REACH

A B gm

5,2005,200

lb.11.4611.46

in.4 23/324 23/32

mm119.9119.9

in.7 9/327 9/32

mm184.9184.9


Cin.

8 9/168 9/16

mm217.5217.5


Din.1010

mm254254

HEAD HEIGHT

Ein.

1 5/81 5/8

mm41.341.3

SPARE PARTS FOR 10-TON STRAIGHT JAW PULLERS

DESCRIPTIONCODE

4015401640174018

Short jaw 4 11/16” reachDouble jaw 4 11/16” reachAngular jaw 7 3/16” reach

Screw head jaw 2 15/16” reach

4011S

4012S

4015

4011

4011HEAD FOR 10-TON PULLER

lb.2,799867

gm1270

LENGTH HEIGHT WIDTH CAPACITY MATERIAL HARDNESS

in.11

in.1 5/8

in.1 5/8

mm279.4

mm41.27

mm41.27

tons10

SAE5132M

HRC36-40

4011SJAW SAFETY CLIP FOR 10-TON PULLER

lb.0.01446

gm6.56

LENGTH HEIGHT WIDTH CALIBRE HARDNESSMATERIAL

in.1 3/16

in.3/4

in.1/2

mm30.16

mm19.05

mm12.7

mm0.64

in.0.025

HRC35-401075

#24

4012SFORCING SCREW FOR 10-TON PULLER

lb.1.0802

gm490

LENGTH DIAMETER & THREAD

HEXAGON CAPACITY

in.10 9/16 3/4-10UNC-2A

in.3/4

mm268.27

mm19.05

tons10

MATERIAL HARDNESS

SAE5132M

HRC42-46


DESCRIPTIONHeadClipForcing screwShort jawDouble reach jawMetal box (code 4019)

QTY.121221


8-PIECE SET


4232SJB AND 4232SJ SET CONTENTS




& C-CLAMPS

PULLERS, VISES

13

REVERSIBLE JAW PULLERS These pullers feature an self fastening system, making them ideal for countless jobs.

It is important to select the tool that will fasten as strongly as possible to the piece being pulled. The decision between a puller with two or three jaws depends on the piece that will be removed and its location. However, whenever space allows it we recommend the use of a 3-jaw puller because its fastening points are better and the force is better distributed when pulling.

4033 4034

4044 4046

Adjustable jaw pullers feature a wider spread than their straight jaw counterparts.In addition, they can reach places that straight jaw pullers are unable to.

ADJUSTABLE ADJUSTABLE STRAIGHT STRAIGHT

Available puller types:2 Adjustable Jaws (A)2 Reversible Jaws (A)3 Adjustable Jaws (B)2/3 Combination Jaws (C)



AUTOMOTIVE PULLERS

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS

TYPE

ABAACC

POSSIBLESPREAD

in.44697

10

REACH

in.3 1/23 1/23 1/25 1/23 1/25 1/2

CAPACITY

tons225757

MINIMUM TEST LOAD

lb.2,5002,5008,0008,0008,0008,000

CODE

403340344044404540464047

STANDARD: FEDERAL GGG-P-781

Adjustable puller

DESCRIPTION

2-way adjustable

JAW TYPE

2

NUMBER OF

JAWS

SPREAD CAPACITY

REACH

2

CAPACITYTONS

B

A

A

gm415

lb.0.91

2-JAW PULLER WITH 2 POSITIONS

4033

in.4

mm101.6

mm88.90

in.3 1/2

(A)

(A)

For pulling different diameter pulleys.


Adjustable puller

DESCRIPTION

3-way adjustable

JAW TYPE

3

NUMBER OF

JAWS

SPREAD CAPACITY

B

CAPACITYTONS

gm750

lb.1.65

3-JAW PULLER WITH 2 POSITIONS

4034

in.4

mm101.6

mm88.90 2

in.3 1/2

(B)

(B)

Pulls pulleys with different diameters.


2-JAW PULLER

40444045

Reversible pullerReversible puller

DESCRIPTION

ReversibleReversible

JAW TYPE

22

NUMBER OF

JAWS

57

CAPACITYTONS

CODE SPREAD CAPACITY

in.69

mm152.40228.60

mm88.90139.7

REACH

in.3 1/25 1/2

gm893

1,865

lb.1.974.11

B

A

A

(A)


2- OR 3-JAW PULLER

40464047

Reversible pullerReversible puller

DESCRIPTION

ReversibleReversible

JAW TYPE

2 or 32 or 3

NUMBER OF

JAWS

57

CAPACITYTONS

CODE

710

SPREAD CAPACITY

B

in.3 1/25 1/2

REACH

A

in. gm.1,2552,664

lb.2.775.87

(C)

(C)



546



AUTOMOTIVE PULLERS

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS

SLIDE HAMMER PULLERS Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws.

T-handle provides better control.

Sliding hammer extracts by blows delivered to the adjusting cone.

Micro-alloy steel jaws are heat-treated for greater resistance to traction.

Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly.

4270A

6 TON HAMMER PULLER, INTERCHANGEABLE TIPS

4277

CIRCULAR SCREW RANGE

4 1/2” to 5 1/2”

ACCESSORIES:5 lb. hammer5/8"-18" Bar with 22" strokeExtracts lugs and components in transmission driveshafts

PULLS

ITS DESIGN ALLOWS USE IN AXLES WITH 4, 5, OR 6 LUGS IN A CIRCLE


gm4,250

lb.9.37

4277

4285

6-TON, 2- OR 3-WAY HAMMER PULLER WITH 3 ACCESSORIES

EXTERNAL CAPACITY

INTERNAL CAPACITY

JAWS SHAFT LENGTH

JAWS' TOE REACH

DISTANCE

in.22 7/1622 7/16

in.2 15/162 15/16

in.5 1/25 5/16

in.4 5/165 5/16

in.1 31/3225/32

in.1 3/8

1 31/32

mm570570

mm74.6174.61

mm140135

mm110135

mm5020

mm3550

23

HammerMax.Max. Min.Min. Total Wt.


gm4,2504,250

gm2,2682,268

lb.9.379.37

lb.5.005.00

4270A

6-TON 3-WAY HAMMER PULLER

EXTERNAL CAPACITY

INTERNAL CAPACITY

JAWS SHAFT LENGTH

JAWS' TOE REACH

DISTANCE

in.22 7/16

in.1 7/8

in.4 1/2

in.4 1/4

in.1 1/2

in.1 1/2

mm570

mm47.63

mm114.30

mm107.75

mm38.10

mm38.103

HammerMax.Max. Min.Min. Total Wt.


gm.3,200

gm.2,268

lb.7.05

lb.5.00

Adjusting coneapplies constant pressure.

4285

ACCESSORIES:A hook jaw that removes gears, bushings, fasteners, and bearing tracks.A jaw that pulls generator and starter bearings.A bar that pulls pulleys and gears with threaded holes.




& C-CLAMPS

PULLERS, VISES

13

GEAR AND BEARING SEPARATORS Gear and bearing separators are designed to remove generator gears and tapered bearings. Their design allows them to reach in places where jaw pullers cannot. The fastening angle of their internal faces helps hold onto and remove bearings without any damage. It is very easy to place it behind the piece needing adjustment or removal and this ensures a good grip, even if the available space is narrow.

CODE FORCING SCREWSLENGTH

CAPACITY

4331433243334334

in.4.845.2010.0013.00

mm123132

254.0330.2

MAX.mm

57.15114.30149.23200.03

in.2 1/44 1/25 7/87 7/8

MIN.in.

1 1/43

3 7/85 7/8

mm31.7576.2098.43149.23

HOLE THREADTYPE

M 10 x 2.412 M x 20

3/4” - 16 NF1” - 12 NF

M 10 x 2.412 M x 20

3/4 - 16 NF1 - 12 NF

GEAR AND BEARING SEPARATORS

STANDARDS: FEDERAL GGG-P-781


TOTAL PIECES

27

PIECES

3333322311121

CONTENTS

3/8” - 16” x 4” bolt3/8” - 24” x 2” bolt5/16” - 18” x 2” boltM8 x 1.25 x 80 mm boltM10 - 1.50 x 50 mm bolt1/4” - 28” x 3” bolt5/16” - 24” x 3 1/2” bolt5/16” - 18” x 4 1/2” bolt5/8” x 5” center bolt (pointed) 5/8” x 6 1/2” center bolt (pointed)YokeRotating capsPlastic box

* Packaged in plastic tray

gm2,015

lb.4.44

HARMONIC BALANCER PULLER SET

4205A 27-PIECE SET

Forcing screw made of micro-alloy steel, offering a perfect fit onto the object being removed.

Adjusting nut controls base separation.

Separating base adjusts to pieces where a conventional puller cannot reach.

4205A

The forcing screw is designed to create strong pushing force so the object being removed comes loose.

Fastening screws are made of heat-treated steel.

HARMONIC BALANCER PULLERS This set contains all the necessary accessories to remove steering wheels from domestic and foreign vehicles, as well as from light

SUV's. It is also useful to pull out things such as bearings, gears, and pulleys. Made of steel. Universal design fits a great variety of removable pieces.

SCREW EXTRACTORS

WORKBENCH VISES


PULLERS GEAR/BEARING SEPARATORS

AUTOMOTIVE PULLERS



548

HARMONIC BALANCER PULLERS

PITMAN ARM PULLER FOR SMALL VEHICLES

4051

DESCRIPTION

Light duty PITMAN arm puller

USE

Small vehicles

CAPACITYOPENING EXTRACTION

gm448

lb.0.99

in.1 1/16

in.1 3/4

mm27

mm45

4050

GOATLEG PULLEY PULLER

4053

MIN.OPENING

MAX.OPENING

REACH

mm35

mm45

mm65

in.1 3/8

in.1 3/4

in.2 9/16

lb.2.43

gm1,100

Extracts pulleys with one or two grooves from alternators and starters.

This tool set removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines, (a common problem). The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without leaving the porcelain in the engine cylinder.

40534052

4051



PULLERS SCREW EXTRACTORS

WORKBENCH VISES


AUTOMOTIVE PULLERS

4205

HARMONIC BALANCER PULLER SET

4205

PIECES

323331

111

CONTENTS

3/8” - 16” x 4” bolt3/8” - 24” x 2” bolt5/16” - 18” x 2” boltM8 x 1.25 x 80 mm boltM10 - 1.50 x 50 mm bolt5/8” x 5” center bolt (pointed)YokeTightening capPlastic box

gm1,500

lb.3.31

17-PIECE SET

HARMONIC DAMPER PULLEY PULLER

4050

PIECES

3

11

11

CONTENTS

Forcing rods, sizes 5/16” x 4”, 5/16” x 5 7/16” and 5/16” x 7 7/16”.3-jaw puller.Harmonic balancer holding tool.Forcing screw.Plastic box.

lb.3.31

gm1,500

6-PIECE SET

BROKEN PLUG REMOVER FOR FORD 3 VALVE

UEXBT

PIECES

111111

CONTENTS

Pusher body.Pusher screw.Tip.Puller housing.Puller screw.Left hand hex nut.

lb.1.76

gm800

6-PIECE KIT

* Packaged in plastic case

PITMAN ARM PULLER FOR LARGE VEHICLES AND TRUCKS

4052

DESCRIPTION

Heavy duty PITMAN arm puller

USE

Largevehicles

gm950

lb.2.09

CAPACITYOPENING EXTRACTIONin.

1 5/16in.

2 1/2mm33

mm64

Extracts steering assembly pitman arms.

UEXBT

Set Includes a Unique Porcelain Pusher Tool.

Porcelain pusher is used to press the porcelain piece, without breaking the porcelain, farther into the plug tip. This provides space for the left hand thread remover to bite into the stainless steel plug tip so it can then be pulled.




& C-CLAMPS

PULLERS, VISES

13

SCREW BOLT AND PIPE EXTRACTORS Puller sockets are designed to easily remove damaged, stripped, or corroded nuts. They can be used on lugs, nuts, bolts, pipe unions, etc. Simply place the puller on the nut that needs to be removed and apply torque with a ratchet, impact bar, air wrench, etc.

• Includesstandardpunch.• Removesthemostcommonhexnuts.• 6-flutedesignfitsperfectlyonhexnuts.

• Foruseonthemostcommerciallugnuts.• Thedriveislocatedinthemiddleofthesocket.

74HLR




WORKBENCH VISES


AUTOMOTIVE PULLERS

End with twist opening

End with hex opening

WHEEL LOCK REMOVAL KIT

74HLR

PIECES

3122

111111

CONTENTS

Hubcap locking lug nut removers.Hubcap locking lug nut remover.Chrysler, Ford and GM lug lock removers.7/8" and 3/8" removers for large and damaged lug locks.Large after-market locking lug nut remover.GM wheel locking lug nut removerExtractor punch.18 mm smooth nut remover.3" Extension.Plastic box

Lb4.850

Kg2.2

13-PIECE KIT

TWIST SOCKET SET3/8" DRIVE

7200S

SIZESDRIVE

in.3/8

mm9.5 9/16, 15 mm, 5/8-16 mm, 17 mm,

11/16, 3/4-19 mm, 3/8, 10 mm, 7/6-11 mm, 12 mm, 13 mm, 14 mm

lb.2.43

gm1,100

14-PIECE KIT

Extractor punchPlastic box

1/2"

3/8"



550


AUTOMOTIVE PULLERS

WORKBENCH VISES




STRAIGHT FLUTE PIPE EXTRACTORS

CODE

95219522952395249525

PIPE DIAMETERin. mm

1/8 3.11/8 3.11/8 3.11/4 6.33/8 9.5

ASME / ANSI B107.46M

TIP WIDTH

1/8 3.111/64 4.313/64 5.119/64 7.511/32 8.7

in. mm

3/16 4.73/16 4.71/4” 6.35/16 7.93/8 9.5

BUTT END WIDTH

in. mm

LENGTH

2 5/16 47.02 5/8 57.02 7/8 64.03 73.03 1/4 81.0

in. mm gm

9.09.018.131.749.8

0.020.020.040.070.11

lb.

950019521

FLIP LUG NUT SOCKET SET 1/2" DRIVE

7400SWL

SIZESDRIVE

in.1/2

mm12.7 17 mm, 3/4"-19 mm, 13/16", 21 mm, 7/8",

1/2"-3" extensionPlastic box

6-PIECE SET

7400SVW

STRAIGHT FLUTE EXTRACTOR SET

9500A

TYPE

Straight flute

CONTENTS

1/8” to 3/8” pipe extractorsVinyl pouch


5-PIECE SET

9500A

7400SWL

5-PIECE SETSPIRAL FLUTE SCREW EXTRACTOR SET

9500B

TYPE

Spiral flute

CONTENTS

1/8” to 3/4” screw extractorsVinyl pouch


NUTS, BOLTS AND PIPE PULLERS

SPIRAL FLUTE SCREW EXTRACTORS

CODE

9500195002950039500495005

DESCRIPTION

1/8” to 1/4”1/4” to 5/16”5/16” to 7/16”7/16” to 9/16”9/16” to 3/4”

HOLE SIZE

in. mm

5/64 2.07/64 2.85/32 4.07/32 5.617/64 6.8

SCREW/NUT SIZE

in. mm

1/8-1/4 3.2-6.31/4-5/16 6.3-7.95/16-7/16 7.9-11.17/16-9/16 11.1-14.39/16-3/4 14.3-19.0

LENGTH

1 27/32 47.02 1/4 57.02 1/2 64.02 7/8 73.03 3/16 81.0

in. mm gm

26122247

lb.0.000.010.030.050.10


1/2" DRIVE FLIP LUG NUT SOCKET SET WITH EXTENSION

7400SVW

SIZESDRIVE

in.1/2

mm12.7 17 mm, 19 mm, 1/2"-3" extension

pouch

3-PIECE SET

9500B




& C-CLAMPS

PULLERS, VISES

13

WORKBENCH VISES

WORKBENCH VISES

STANDARD: FEDERAL GGG-V-410B

CODE

424425426427

JAW WIDTH

Ain.4567

mm101.6127.0152.4177.8

MAX. OPENING

Bin.46

7 1/210

mm101.6152.4190.5254.0

in.7 7/89 1/210 5/8

11 13/16

mm200.0241.3269.9300.0

HEIGHT

Cin.

15 3/420 5/6423 1/3224 13/16

mm400.0510.0585.0630.2

TOTAL LENGTH

Lgm

21,00032,50044,50058,000

lb.46.371.798.1127.9

Robust and reinforced, they are ideal for heavy-duty work. The jaws are made of tempered steel and the U-shaped guide is made of steel, providing greater resistance while protecting the screw and bronze nut. The dismountable jaws hold circular pieces better. The base swivels 360 degrees.

Sliding handle applies optimal torque onto the clamped piece.

Dismountable tempered steel jaws

U-shaped steel guide protects the screw and bronze nuts.

L

A

B

C

SWIVEL BASE

SCREW EXTRACTORS

AUTOMOTIVE PULLERS



AUTOMOTIVE PULLERS



WORKBENCH VISES

PULLERS



552


SCREW EXTRACTORS

AUTOMOTIVE PULLERS


WORKBENCH VISES PRECISION VISES

& C-CLAMPS

PULLERS

Bottom groove guide on the base for precision installation on workbench.

PRECISION MILLING VISES2 AXES


CODE

4520245203452044520545206

in.1/29/169/1611/1611/16

in.1

1 5/161 1/21 3/41 3/4

in.23456

in.23456

in.1/4 x 201/4 x 201/4 x 205/16 x 185/16 x 18

mm12.7014.2914.2917.4617.46

mm2534384545

mm50

76.2101.6127

152.4

mm50

76.2101.6127

152.4

mm6.35 x 5086.35 x 5086.35 x 5087.94 x 4577.94 x 457

BOTTOM GROOVE

JAW DEPTH

JAW OPENING

JAW WIDTH

THREAD

gm3,5009,35017,00029,45042,800

lb.7,7220,6137,4864,9394,36

PRECISION MILLING VISES1 AXIS


CODE

45103451044510545106

in.9/169/1611/1611/16

in.1 5/161 1/21 3/41 3/4

in.3456

in.3456

in.1/4 x 201/4 x 205/16 x 185/16 x 18

mm14.2914.2917.4617.46

mm34384545

mm76.2101.6127

152.4

mm76.2101.6127

152.4

mm6.35 x 5086.35 x 5087.94 x 4577.94 x 457

BOTTOM GROOVE

JAW DEPTH

JAW OPENING

JAW WIDTH

THREAD

gm9,35017,00029,00038,800

lb.20.6137.4863.9385.53

PRECISION MILLING VISES3 AXES


CODE

4530545306

in.11/1611/16

in.1 3/41 3/4

in.56

in.56

in.5/16 x 185/16 x 18

mm17.4617.46

mm4545

mm127

152.4

mm127

152.4

mm7.94 x 4577.94 x 457

BOTTOM GROOVE

JAW DEPTH

JAW OPENING

JAW WIDTH

THREAD

gm36,00054,000

lb.79,37119.00

Hardened jaws (53 to 59 HRc). Squareness and parallelism precise to within 0.0012" (30 microns).

Precision vises are casted of high-tension, close-grained cast steel. They have a scratch- and rust-proof gray polychromatic finish.

Ergonomic steel crank handle minimizes user effort. Spring-loaded ball detent allows quick and better attachment.

High-precision threaded screw provides the optimal tightening mechanism for firm clamping and smooth operation.

These precision vises use high grade bolts, providing greater strength and rigidity.

Bolt holes provide great anchoring points on workbenches.

Base squareness and parallelism precise to within 0.0012" (30 microns).

360 degree graduated swivel base. Graduation in 1 degree increments.

45104

PRECISION MILLING VISES




& C-CLAMPS

PULLERS, VISES

13

412PRO

412

C-CLAMPS Heavy-duty c-clamps are forged in high-quality alloy steel. Their highly engineered proportions perform better on resistance tests. Screws

with ACME rolling threads provide more strength and smooth operation. These heavy-duty c-clamps allow greater precision, better performance and high efficiency.

These deep-throated forged body c-clamps are ideal for safely fastening pieces so you can work on them. Mainly used for welding and soldering, in workshops or for industrial purposes.

Deeper throats

They feature a large diameter

screw, a comfortable

sliding T-handle and ACME thread

that makes turning easy.

Reinforced corners.


SCREW EXTRACTORS

AUTOMOTIVE PULLERS


WORKBENCH VISES

PULLERS

Design provides greater reach and throat depth.

ASME / ANSI B107.46M, FEDERAL GGG-C-4060

DEEP THROAT C-CLAMPSFORGED BODY

402403404406408410412

mm120.65146.05193.67247.01314.25314.25342.9

in.4 3/45 3/47 5/89 7/812 3/812 3/813 1/2

lb.3,3003,5004,1005,4005,9006,2009,300

mm12.712.719.119.119.119.122.2

in.1/21/23/43/43/43/47/8

mm50.860.369.966.7114.3136.5146.1

in.2

2 3/82 3/43 5/84 1/25 3/85 3/4

A BC D

gm600850

1,4502,1833,4504,7506,100

lb.1.321.873.204.817.6110.4713.45

CODE SCREW LENGTH

B

SCREW DIAMETER

C

THROAT DEPTH

D

CAPACITY

A

MAXIMUM CAPACITY

in.0 - 20 - 30 - 40 - 60 - 80 - 100 - 12

mm0 - 50.80 - 76.20 - 101.60 - 152.40 - 203.20 - 254.00 - 304.8

PRECISION VISES & C-CLAMPS

HEAVY-DUTY FORGED C-CLAMPS

CODE

404PRO406PRO408PRO410PRO412PRO

mm155

198.4240.5329.8360

in.6 1/8

7 13/169 15/3212 63/6414 11/64

SCREWLENGTH

B

mm15.822.225.425.428.5

in.5/87/811

1 1/8

SCREWDIAMETER

C

mm50.869.896124130

lb.3,357,6311,7916,3423,84

in.2

2 3/43 3/44 7/85 1/8

THROAT DEPTH

D

CAPACITY

A

in.0 - 40 - 60 - 80 - 100 - 12

mm0 - 101.60 - 152.40 - 203.20 - 254.00 - 304.8

MAXIMUM CAPACITY

lb.8,52010,77111,20911,41116,559

gm1,2502,8504,4006,1008,900

ASME / ANSI B107.46M, FEDERAL C-4060

A BC

D



PULLERS, VISES C-CLAMPS - mdmetric.commdmetric.com/prod/upt/537_upt13cat.pdf · B107.46M “stud,...

Documents

Transcript of PULLERS, VISES C-CLAMPS - mdmetric.commdmetric.com/prod/upt/537_upt13cat.pdf · B107.46M “stud,...