8/14/2019 Project_SMJM1013_20132014.pdf
1/2
1
PROJECT:
APPLICATIONS OF MATHEMATICAL
CONCEPTS IN ENGINEERING
LECTURER(s):
1.
2.
Title
NAMES IC NUMBER MATRIC NO.1.
2.
3.
4.
Date of submission:
Subject Marks (9%)1. Selection of Case Study (3%)
2. Sample calculations (3%)
3. References(3%)
TOTAL
SMJM 1013
Engineering Mathematics 1
Malaysia-Japan InternationalInstitute of Technology
8/14/2019 Project_SMJM1013_20132014.pdf
2/2
2
Group Assignment (9% of course marks).
The purpose of this assignment is to allow you to relate the mathematical concepts
that are covered in class to the real world engineering problems. You have to find a
sample case study where the mathematical concepts are used effectively to solve an
engineering problem. In your assignment, you must:
1. Identify one or more mathematical concepts of your interest.2. State how these concepts are actually used in the case study you selected.
For example, you may choose the topic of complex numbers and the case study that
you have selected might be related to how the concept is being used to calculate
power dissipation of an element in a circuit involving alternating currents. If possible,include some sample calculations as to how the concepts are used in your case study.
Include some computer simulations to validate your calculations (optional).
Marks for the assignment will be given based on the criteria explained in Table 2:
Table 2: Marking criteria
Subject Marks criteria %
1. Selection of
a relevant case
study and clear
explanationprovided.
3: Relevant case study and clear explanation with appropriate
diagrams are provided.
1-2: Explanation is provided but still difficult to understand the
case study presented or case study is not entirely relevant.0: Answer difficult to read. Points are not clear. Plagiarism
detected.
3
2. Providing
sample
calculations
and correct
implementation
of the chosen
concepts.
3-4: Sample calculations are done excellently. Correct solution
found. Solutions are validated.
1-2: Some errors found in the calculations.
0: No sample calculations. A lot of errors or plagiarism
detected.
3
3. Properreferences are
provided with
correct citation
methods used.
3: Proper references are provided with correct citation methodsused.
1-2: Too few references used. References are not cited
properly.
0: No references provided. A lot of errors in citation or
plagiarism detected.
3
TOTAL 9
Submission
Your report must be typed and submitted by 6 December 2013.
WARNING: Plagiarized work will receive ZERO (0%).
Malaysia-Japan InternationalInstitute of Technology
Top Related