Conex >B< Press
Features & Benefits
• Extensive range of reducers and reducing tees.
• Both Copper and Red Brass for drinking water
• Fittings for gas, solar and stainless steel available
• 15mm -108mm
• Manufactured in accordance with EN 1254 & EN.ISO.9000.2001
IBP’s unique Pressing indicator
• O-ring seal has reduced cord section with tri-lobal support bands either side
• 15-54mm fittings
Tri-lobal support bands
• Provide support between tube and body
• Maintain central position in the groove
• Ensure that a leak path remains open before pressing
• Leaks at very low pressures (from 0.1 bar)
• When pressed the material compresses into the gaps filling the missing material
• Makes a permanent secure joint
Pressing indicator
• Specially designed o-ring, patent applied• Leaks from 0.1 bar pressure when not pressed
• For hot and cold water applications
• Fully tested to 40 bar pressure and approved by DVGW and WRAS
• Uses existing jaws approved by IBP, no visual change to body appearance
• Available in dimensions 12mm to 54mm
Installation guide
• Ensure the tube and fitting sizes are compatible. Cut the tube end square, and ensure it retains its shape.
• Deburr the inside, and out of the tube.
• Check o-rings are present in the fitting.
• Insert the tube into the fitting until the tube stop, ensure the o-rings are not dislodged.
• If the joint(s) is (are) not pressed, when pressure tested they will leak profusely.
• Insert the correct jaw size into the >B< Press Tool
• Open the press jaw, and align with the o-ring bead, allow the jaw to close.
• Operate the press machine to press the fitting.
The machine will stop at the end of its pressing cycle.
• Open the jaw, and remove from the fitting.
• Make sure all joints have been pressed.
Temperature and pressure ratings
• Stainless Steel Range
• For drinking water installations
• EPDM o-ring
• DVGW approval
• Available 15-54mm
Conex >B< Press Gas
• Yellow HNBR o-ring• For liquid gas, foil oil & compressed gas installations• Available 15-54mm• Advantica approved
Temperature and pressure ratings
Conex >B< Press Solar
• Green FKM o-ring with pressing indicator
• Suitable for continuous operating temperatures up to 140C and short term excursions up to 230C
• Pressing indicator
• Available in sizes 15-28mm
• Pre-assembled
• Tested & Approved by SPF
Temperature and pressure ratings
Top Related