Copyright © Chul-Goo Kang
Mechatronics Design Lab 1
Decade Counter Design using Two 7-sement LEDs.
Design two-digit decade counter (00-99) using two 7490 counter chips, two 7-
segment LEDs and driver chips, which can be used in many applications such as
external event counting in mechanical systems. Generate 10 Hz square wave using a
function generator, and then count and display the number of pulses using your
designed decade counter.
.
Necessary devices and components
Function generator, Power supply, Oscilloscope, Multimeter,
Two 7490, Two 74HC4511, Two 7-LED
Procedure
1.Design a digital logic circuit using pin diagrams and truth tables (refer to TTL Data
Book in the lab) of supplied chips as follows.
2. Generate a 10 Hz square wave using the function generator prepared in the lab.
Check the generated pulse using oscilloscope or multimeter, and make the amplitude
be 5V.
3. Connect the function generator signal to your designed circuit input, and count the
pulse numbers and display it in two 7-segment LEDs.
Copyright © Chul-Goo Kang
Copyright © Chul-Goo Kang
Copyright © Chul-Goo Kang
Copyright © Chul-Goo Kang
74HC4511N, 74LS47
Copyright © Chul-Goo Kang
Copyright © Chul-Goo Kang
Breadboard
Vcc (5V): red
GND (0V): black
Wire stripper Power supply
Copyright © Chul-Goo Kang
Demonstration
Copyright © Chul-Goo Kang
Protus simulation
Top Related