5
Level measurement – Radar
Contents Page
Overview ........................................................... 6
VEGAPULS series 60 ....................................... 8 ff.
Dimensions ....................................................... 18 ff.
Level measurement – Radar
6
Level measurement – Radar
VEGAPULS:
Non-contact measurement of liquids and solids under arduousprocess conditionsMeasuring principleExtremely short microwave impulses with low emitted power inthe C-band and K-band frequency range are emitted by theantenna system to the measured product, reflected by theproduct surface and received again by the antenna system. Theyspread with light velocity and the time from the emission to receiptof the signals is proportional to the level in the vessel. A specialtime spreading procedure enables a reliable and precisemeasurement of extremely short time periods.
Latest microprocessor technology and the proven ECHOFOXsoftware select the level echo reliably from a number of falsereflections and the echo is measured exactly.
By simply entering the vessel dimensions, a level-proportionalsignal can be displayed. An adjustment with emptied and filledvessel is no longer necessary!
Unaffected by temperature and pressureThe spreading of microwaves is virtually not affected by theambient temperature and ambient pressure. Radar sensors areideal for use under arduous process conditions. Pressures fromvacuum to 160 bar and temperatures between -40 and 400°C areno problem for a radar level measurement.
Unaffected by product propertiesFluctuating product compositions or complete changes of theproduct do not influence the measurement result. A newadjustment is not necessary.
7
Level measurement – Radar
Overview
K-Band VEGAPULS 61 VEGAPULS 62 VEGAPULS 63
Applications: aggressive liquids storage and process vessels aggressive liquidsin small vessel, under under arduous process under arduous processnormal process conditions conditions conditions
Meas. range: up to 10 m up to 30 m up to 20 m
Process fitting: G1½A of PVDF thread or flange flange or hygienic fitting
Process temperature: -40…130°C -40…200°C -40…150°C
Process pressure: -1…3 bar (-100…300 kPa) -1…40 bar (-100…4000 kPa) -1…16 bar (-100…1600 kPa)
Accuracy: +/- 5 mm +/- 3 mm +/- 3 mm
Replacement for: VEGAPULS 41 VEGAPULS 42 VEGAPULS 43VEGAPULS 44VEGAPULS 45
C-Band VEGAPULS 65 VEGAPULS 66
Applications: aggressive liquids storage and process vesselsunder normal process under arduous processconditions conditions
Meas. range: up to 30 m up to 30 m
Process fitting: G1½A or flange flange
Process temperature: -40…150°C -40…400°C
Process pressure: -1…16 bar (-100…1600 kPa) -1…160 bar (-100…16000 kPa)
Accuracy: +/- 10 mm +/- 10 mm
Replacement for: VEGAPULS 51 VEGAPULS 54VEGAPULS 52 VEGAPULS 56VEGAPULS 53
8
Level measurement – RadarVEGAPULS 61
VEGAPULS 61Radar sensor for continuous level measurementwith PVDF-encapsulated antenna system (K-Band, 26GHz)Especially suitable for small vessels for measurement ofAggressive liquids under easy process conditions
- wetted parts: PVDF- measurement up to 50mm to the antenna edge possible- accuracy +/- 5mm- ECHOFOX signal processing with Fuzzy-Logic- adjustment with PLICSCOM, HART handheld or PC- instrument from the plics® family
9
Level measurement – RadarVEGAPULS 61 (continuation)
Approval XX without ...........................................................................................................................................................................................XM Ship approval ..............................................................................................................................................................................CX ATEX II 1G, 1/2G, 2G EEx ia IIC T6 ..........................................................................................................................................CA ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + WHG ............................................................................................................................CM ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + Ship approval ............................................................................................................DX ATEX II 1/2G, 2G EEx d ia IIC T6 1) ...........................................................................................................................................
Version/Material A with encapsulated horn antenna PVDF / -40°C...130°C ...............................................................................................
Process connection/Material GP Thread G1½A PN3/PVDF ...........................................................................................................................................NP Thread 1½NPT PN3/PVDF .........................................................................................................................................CA Tri-Clamp 2" PN3/1.4435(316L) ................................................................................................................................CB Tri-Clamp 3"/1.4435(316L) .........................................................................................................................................RA Bolting DN50 PN3,DIN 11851 1.4435(316L) .........................................................................................................RB Bolting DN80 PN3,DIN 11851 1.4435(316L) .........................................................................................................
Electronics H 4...20mA HART® ....................................................................................................................................................V Four wire 20...72VDC,20...250VAC/4...20mA HART® 1) .................................................................................P Profibus PA ..............................................................................................................................................................F Foundation Fieldbus ..............................................................................................................................................
Housing/Protection K Plastic/IP66/IP67 ..............................................................................................................................................A Aluminium/IP66 ................................................................................................................................................D Aluminium double chamber/IP66/IP67 ........................................................................................................V Stainless steel 1.4435(316L)/IP66/IP67 ......................................................................................................
Cable entry/Plug connection M M20x1.5/without .........................................................................................................................................N ½NPT/without .............................................................................................................................................
Indicating-adjustment module (Plicscom) X without ...................................................................................................................................................A mounted ................................................................................................................................................
PS61.
1) Only in conjunction with housing version "D"
10
Level measurement – RadarVEGAPULS 62
VEGAPULS 62Radar sensor for continuous level measurementwith horn antenna or mounted 1/2" standpipe (K-Band, 26GHz)Especially suitable for storage tanks or process vessels for measurement of virtually all substances under arduous process conditions
- non-contact measurement unaffected by the process pressure, process temperature and process gas- measurement up to 50mm to the antenna edge possible- accuracy +/- 3mm- ECHOFOX signal processing with Fuzzy-Logic- adjustment with PLICSCOM, HART handheld or PC- instrument from the plics® family
11
Level measurement – RadarVEGAPULS 62 (continuation)
Approval XX without .........................................................................................................................................................................................XM Ship approval .............................................................................................................................................................................CX ATEX II 1G, 1/2G, 2G EEx ia IIC T6 ........................................................................................................................................CA ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + WHG ..........................................................................................................................CM ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + Ship approval ..........................................................................................................DX ATEX II 1/2G, 2G EEx d ia IIC T6 1) .........................................................................................................................................
Version/Material B with horn antenna ø 40 mm/1.4435(316L) .....................................................................................................................C with horn antenna ø 48 mm/1.4435(316L) .....................................................................................................................D with horn antenna ø 75 mm/1.4435(316L) .....................................................................................................................E with horn antenna ø 95 mm/1.4435(316L) .....................................................................................................................F with ½"-standpipe/1.4435(316L) 2) ...................................................................................................................................
Process connection/Material GA Thread G¾A PN40/1.4435(316L) 3) ........................................................................................................................NA Thread ¾NPT PN40/1.4435(316L) 3) ......................................................................................................................GD Thread G1½A PN40/1.4435(316L) ........................................................................................................................ND Thread 1½NPT PN40/1.4435(316L) ......................................................................................................................FB Flange DN40PN40 Form C,DIN2501/1.4435(316L) ...........................................................................................FC Flange DN50PN40 Form C,DIN2501/1.4435(316L) ...........................................................................................FD Flange DN80PN40 Form C,DIN2501/1.4435(316L) ...........................................................................................FE Flange DN100PN16 Form C,DIN2501/1.4435(316L) ........................................................................................FK Flange DN150PN16 Form C,DIN2501/1.4435(316L) ........................................................................................AC Flange 1½"150lb RF,ANSI B16.5/1.4435(316L) ..................................................................................................AE Flange 2"150lb RF,ANSI B16.5/1.4435(316L) .....................................................................................................AI Flange 3"150lb RF,ANSI B16.5/1.4435(316L) .....................................................................................................
AK Flange 4"150lb RF,ANSI B16.5/1.4435(316L) .....................................................................................................AM Flange 6"150lb RF,ANSI B16.5/1.4435(316L) .....................................................................................................
Seal/Process temperature 2 Viton/-40...130°C ..................................................................................................................................................3 Kalrez 6375/-15...130°C .....................................................................................................................................4 Viton/-40...200°C with temperature adapter ....................................................................................................5 Kalrez Spectrum/-15...200°C w. temperature adapter ..................................................................................
Electronics H 4...20mA HART® ............................................................................................................................................V Four wire 20...72VDC,20...250VAC/4...20mA HART® 1) .........................................................................P Profibus PA ......................................................................................................................................................F Foundation Fieldbus ......................................................................................................................................
Housing/Protection K Plastic/IP66/IP67 ......................................................................................................................................A Aluminium/IP66 ........................................................................................................................................D Aluminium double chamber/IP66/IP67 ................................................................................................V Stainless steel 1.4435(316L)/IP66/IP67 ..............................................................................................
Cable entry/Plug connection M M20x1.5/without .................................................................................................................................N ½NPT/without .....................................................................................................................................
Indicating-adjustment module (Plicscom) X without ...........................................................................................................................................A mounted ........................................................................................................................................
PS62.
1) Only in conjunction with housing version "D"2) only in conjunction with seal/process temperature "4" or "5"3) only in conjunction with version "F"
Length standpipe in mm per 100 mm of 1.4435(316L)
12
Level measurement – RadarVEGAPULS 63
VEGAPULS 63Radar sensor for continuous level measurementwith PTFE-encapsulated antenna system (K-Band, 26GHz)Especially suitable for measurement of very aggressive liquidsunder arduous process conditions
- only one material for wetted parts: TFM-PTFE- measurement up to 50mm to the antenna edge possible- accuracy +/- 3mm- ECHOFOX signal processing with Fuzzy-Logic- adjustment with PLICSCOM, HART handheld or PC- instrument from the plics® family
13
Level measurement – RadarVEGAPULS 63 (continuation)
Approval XX without ...........................................................................................................................................................................................XM Ship approval ...............................................................................................................................................................................CX ATEX II 1G, 1/2G, 2G EEx ia IIC T6 ..........................................................................................................................................CA ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + WHG ............................................................................................................................CM ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + Ship approval .............................................................................................................DX ATEX II 1/2G, 2G EEx d ia IIC T6 1) ............................................................................................................................................
Version/Material P with encapsulated horn antenna/PTFE / -40°C...150°C .................................................................................................
Process connection/Material CA Tri-Clamp 2"/1.4435(316L) .........................................................................................................................................CB Tri-Clamp 3"/1.4435(316L) .........................................................................................................................................CC Tri-Clamp 4"/1.4435(316L) .........................................................................................................................................RA Bolting DN50 PN16,DIN 11851 1.4435(316L) .......................................................................................................RB Bolting DN80 PN16,DIN 11851 1.4435(316L) .......................................................................................................FC Flange DN50PN40 Form C,DIN2501/1.4435(316L) .............................................................................................FD Flange DN80PN40 Form C,DIN2501/1.4435(316L) .............................................................................................FE Flange DN100PN16 Form C,DIN2501/1.4435(316L) ...........................................................................................FK Flange DN150PN16 Form C,DIN2501/1.4435(316L) ...........................................................................................AE Flange 2"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AI Flange 3"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................
AK Flange 4"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AM Flange 6"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................
Electronics H 4...20mA HART® ....................................................................................................................................................V Four wire 20...72VDC,20...250VAC/4...20mA HART® 1) .................................................................................P Profibus PA ..............................................................................................................................................................F Foundation Fieldbus ..............................................................................................................................................
Housing/Protection K Plastic/IP66/IP67 ..............................................................................................................................................A Aluminium/IP66 ................................................................................................................................................D Aluminium double chamber/IP66/IP67 ........................................................................................................V Stainless steel 1.4435(316L)/IP66/IP67 ......................................................................................................
Cable entry/Plug connection M M20x1.5/without .........................................................................................................................................N ½NPT/without .............................................................................................................................................
Indicating-adjustment module (Plicscom) X without ...................................................................................................................................................A mounted ................................................................................................................................................
PS63.
1) Only in conjunction with housing version "D"
14
Level measurement – RadarVEGAPULS 65
VEGAPULS 65Radar sensor for continuous level measurementwith rod antenna system (C-Band, 6GHz)Especially suitable for vessels with small process connectionFor measurement of aggressive liquids under easy process conditions
- wetted parts: PVDF or PTFE- measurement up to 100mm to the antenna edge possible- accuracy +/- 10mm- ECHOFOX signal processing with Fuzzy-Logic- adjustment with PLICSCOM, HART handheld or PC- instrument from the plics® family
15
Level measurement – RadarVEGAPULS 65 (continuation)
Approval XX without ............................................................................................................................................................................................XM Ship approval ................................................................................................................................................................................CX ATEX II 1G, 1/2G, 2G EEx ia IIC T6 ...........................................................................................................................................CA ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + WHG .............................................................................................................................CM ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + Ship approval .............................................................................................................DX ATEX II 1/2G, 2G EEx d ia IIC T6 1) ............................................................................................................................................
Version/Material K Rod antenna for socket 50 mm/PVDF a.PTFE/-40°C...130°C 2) ....................................................................................L Rod antenna for socket 100 mm/PTFE / -40°C...150°C 3) ...............................................................................................M Rod antenna for socket 250 mm/PTFE/-40°C...150°C 3) .................................................................................................
Process connection/Material GD Thread G1½A PN16/1.4435(316L) ...........................................................................................................................GP Thread G1½A PN3/PVDF ...........................................................................................................................................ND Thread 1½NPT PN16/1.4435(316L) ........................................................................................................................NP Thread 1½NPT PN3/PVDF .........................................................................................................................................FC Flange DN50PN40 Form C,DIN2501/1.4435(316L) .............................................................................................FD Flange DN80PN16 Form C,DIN2501/1.4435(316L) .............................................................................................FE Flange DN100PN16 Form C,DIN2501/1.4435(316L) ...........................................................................................FK Flange DN150PN16 Form C,DIN2501/1.4435(316L) ...........................................................................................AE Flange 2"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AI Flange 3"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................
AK Flange 4"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AM Flange 6"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................
Electronics H 4...20mA HART® ....................................................................................................................................................V Four wire 20...72VDC,20...250VAC/4...20mA HART® 1) .................................................................................P Profibus PA ..............................................................................................................................................................F Foundation Fieldbus ..............................................................................................................................................
Housing/Protection K Plastic/IP66/IP67 ..............................................................................................................................................A Aluminium/IP66 ................................................................................................................................................D Aluminium double chamber/IP66/IP67 ........................................................................................................V Stainless steel 1.4435(316L)/IP66/IP67 ......................................................................................................
Cable entry/Plug connection M M20x1.5/without .........................................................................................................................................N ½NPT/without .............................................................................................................................................
Indicating-adjustment module (Plicscom) X without ...................................................................................................................................................A mounted ................................................................................................................................................
PS65.
1) Only in conjunction with housing version "D"2) only for process fitting "GP" or "NP"3) with process fitting "GP" or "NP" process temperature -40...130°C
16
Level measurement – RadarVEGAPULS 66
VEGAPULS 66Radar sensor for continuous level measurementwith horn antenna or with mounted 2" standpipe (C-Band, 6GHz)Especially suitable for the measurement of liquids and solidsunder arduous or extreme process conditions
- non-contact measurement unaffected by the process pressure, process temperature and process gas- measurement up to 100mm to the antenna edge possible- accuracy +/- 10mm- ECHOFOX signal processing with Fuzzy-Logic- adjustment with PLICSCOM, HART handheld or PC- instrument from the plics® family
17
Level measurement – RadarVEGAPULS 66 (continuation)
Approval XX without ...........................................................................................................................................................................................XM Ship approval ..............................................................................................................................................................................CX ATEX II 1G, 1/2G, 2G EEx ia IIC T6 ..........................................................................................................................................CA ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + WHG ............................................................................................................................CM ATEX II 1G, 1/2G, 2G EEx ia IIC T6 + Ship approval ............................................................................................................DX ATEX II 1/2G, 2G EEx d ia IIC T6 1) ...........................................................................................................................................
Version/Material A without horn antenna for standpipe ...................................................................................................................................D with horn antenna ø 75 mm/1.4435(316L) .......................................................................................................................E with horn antenna ø 96 mm/1.4435(316L) .......................................................................................................................H with horn antenna ø 145 mm/1.4435(316L) ....................................................................................................................I with horn antenna ø 195 mm/1.4435(316L) ....................................................................................................................
J with horn antenna ø 240 mm/1.4435(316L) ....................................................................................................................F with ø50mm-standpipe/1.4435(316L) ...............................................................................................................................
Process connection/Material FC Flange DN50PN40 Form C,DIN2501/1.4435(316L) ............................................................................................FD Flange DN80PN40 Form C,DIN2501/1.4435(316L) ............................................................................................FE Flange DN100PN16 Form C,DIN2501/1.4435(316L) ..........................................................................................FK Flange DN150PN16 Form C,DIN2501/1.4435(316L) ..........................................................................................FL Flange DN200PN16 Form C,DIN2501/1.4435(316L) ..........................................................................................FI Flange DN250PN16 Form C,DIN2501/1.4435(316L) ..........................................................................................
AE Flange 2"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AI Flange 3"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................
AK Flange 4"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AM Flange 6"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AN Flange 8"150lb RF,ANSI B16.5/1.4435(316L) .......................................................................................................AP Flange 10"150lb RF,ANSI B16.5/1.4435(316L) ....................................................................................................
Seal/Process temperature 2 Viton/-40...150°C ...................................................................................................................................................3 Kalrez 6375/-15...150°C .......................................................................................................................................G Graphite and ceramic -60...250°C ......................................................................................................................H Graphite and ceramic -60...400°C ......................................................................................................................
Electronics H 4...20mA HART® .............................................................................................................................................V Four wire 20...72VDC,20...250VAC/4...20mA HART® 1) ...........................................................................P Profibus PA .......................................................................................................................................................F Foundation Fieldbus .......................................................................................................................................
Housing/Protection K Plastic/IP66/IP67 ........................................................................................................................................A Aluminium/IP66 ..........................................................................................................................................D Aluminium double chamber/IP66/IP67 ..................................................................................................V Stainless steel 1.4435(316L)/IP66/IP67 ................................................................................................
Cable entry/Plug connection M M20x1.5/without ..................................................................................................................................N ½NPT/without ......................................................................................................................................
Indicating-adjustment module (Plicscom) X without .............................................................................................................................................A mounted ..........................................................................................................................................
Additional equipment X without .......................................................................................................................................1 Antenna extension single section 2) .....................................................................................
PS66.
1) Only in conjunction with housing version "D"2) only in conjunction with version "D","E","H","I" or "J"
Length standpipe/ in mm per 100 mm of 1.4435(316L)
18
Level measurement – RadarDimensions
ø 77~ 69
117
(*12
8)
M20x1,5
ø 84~ 116
116
(*12
5)
~ 87ø
120
(*12
9)
~ 69
112
(*123
)
ø 77
½
M2½ N M20x1,5/
½ NPT
M20x1,5/½ NPT
M16x1,5
VEGAPULS 61
Aluminium housingPlastic housing Stainless steelhousing
Aluminium doublechamber housing
* with display
20
ø 39
4310
6
22
ø 40
118
122
22
ø 40
3812
2
SW50G1½/1½ NPT
VEGAPULS 62
SW50
SW50
19
Level measurement – RadarDimensions
VEGAPULS 62 standpipe antenna
ø 4,2
ø 21,3
32
172
L
22
ø 4,2
k
D
ø 21,3
32
172
L
b
SW50G1½/1½ NPT
Flange connection acc. to DIN 2501,seal ledge acc. to DIN 2526 Form D
Flange HolesSize D b k No. d2
DN 40 PN 40 150 18 110 4 18
DN 50 PN 40 165 20 125 4 18
DN 80 PN 40 200 24 160 8 18
DN 100 PN 16 220 20 180 8 18
DN 150 PN 16 285 22 240 8 22
Flange connection acc. toANSI B16,5, RF
Flange HolesSize D b k No. d
2
2“ 150 lb 152,4 19,1 120,7 4 19,1
3“ 150 lb 190,5 23,9 152,4 4 19,1
4“ 150 lb 228,6 23,9 190,5 8 19,1
6“ 150 lb 279,4 25,4 241,3 8 22,4
20
Level measurement – RadarDimensions
VEGAPULS 62 flanges
Flange connection acc. to DIN 2501, seal ledgeacc. to DIN 2526 Form D
Flange Holes AntennaSize D b k No. d
2x y
DN 40 PN 40 150 18 110 4 18 40 100
DN 50 PN 40 165 20 125 4 18 48 120
DN 80 PN 40 200 24 160 8 18 75 200
DN 100 PN 16 220 20 180 8 18 95 300
DN 150 PN 16 285 22 240 8 22 95 300
Flange connection acc. to ANSI B16,5, RFFlange Holes Antenna
Size D b k No. d2 x y
2“ 150 lb 152,4 19,1 120,7 4 19,1 48 120
3“ 150 lb 190,5 23,9 152,4 4 19,1 75 200
4“ 150 lb 228,6 23,9 190,5 8 19,1 95 300
6“ 150 lb 279,4 25,4 241,3 8 22,4 95 300
b
x
k
D
60y
140
21
VEGAPULS 63
Flange connection acc. to DIN 2501, seal ledgeacc. to DIN 2526 Form D
Flange Holes Flangecoating
Size D b k No. d2 x y
DN 50 PN 40 165 20 125 4 18 102 8
DN 80 PN 40 200 24 160 8 18 138 14
DN 100 PN 16 220 20 180 8 18 158 14
DN 150 PN 16 285 22 240 8 22 212 14
Flange connection acc. to ANSI B16,5, RFFlange Holes Flange
coatingSize D b k No. d
2x y
2“ 150 lb 152,4 19,1 120,7 4 19,1 91,9 8
3“ 150 lb 190,5 23,9 152,4 4 19,1 127 14
4“ 150 lb 228,6 23,9 190,5 8 19,1 157,2 14
6“ 150 lb 279,4 25,4 241,3 8 22,4 215,9 14
Level measurement – RadarDimensions
ø 44
x
k
D
b 4
98y
b 4
ø 75
x
k
D
161
y
22
VEGAPULS 65
Level measurement – RadarDimensions
22 82
ø 40
ø 33
352
41
120
(270
)22
7041
5 (5
65)
ø 33
SW50G1½/1½ NPT
SW 46: 1.4435SW 50: PVDF
23
VEGAPULS 65
Flange connection acc. to DIN 2501,seal ledge acc. to DIN 2526 Form D
Flange HolesSize D b k No. d
2
DN50 PN16/40C 165 20 125 4 18
DN80 PN16/40C 200 24 160 8 18
DN100 PN16C 220 20 180 8 18
DN150 PN16C 285 22 240 8 22
Flange connection acc. toANSI B16,5, RF
Flange HolesSize D b k No. d
2
2“ 150 lb 152,4 19,1 120,7 4 19,1
3“ 150 lb 190,5 23,9 152,4 4 19,1
4“ 150 lb 228,6 23,9 190,5 8 19,1
6“ 150 lb 279,4 25,4 241,3 8 22,4
Level measurement – RadarDimensions
ø 33
395
(545
)94
120
(270
)
b
D
k
24
VEGAPULS 66 horn antenna
Level measurement – RadarDimensions
x
k
D
b
80y
200
337
Flange connection acc. to DIN 2501, seal ledgeacc. to DIN 2526 Form D
Flange Holes AntennaSize D b k No. d2 x y
DN 50 PN 16/40 165 20 125 4 18 – –
DN 80 PN 16/40 200 24 160 8 18 75 75
DN 100 PN 16 220 20 180 8 18 96 113
DN 150 PN 16 285 22 240 8 22 146 205
DN 200 PN 16 340 24 295 12 22 196 296
DN 250 PN 16 405 26 355 12 26 242 380
Flange connection acc. to ANSI B16,5, RFFlange Holes Antenna
Size D b k No. d2
x y
2“ 150 lb 152,4 19,1 120,7 4 19,1 – –
3“ 150 lb 190,5 23,9 152,4 4 19,1 75 75
4“ 150 lb 228,6 23,9 190,5 8 19,1 96 113
6“ 150 lb 279,4 25,4 241,3 8 22,4 146 205
8“ 150 lb 342,9 28,4 298,5 8 22,4 196 296
10“ 150 lb 406,4 30,2 362 12 25,4 242 380
25
VEGAPULS 66 standpipe antenna
Level measurement – RadarDimensions
k
D
b
47
80L
56
ø 52
ø
200
Flange connection acc. to DIN 2501,seal ledge acc. to DIN 2526 Form D
Flange HolesSize D b k No. d2
DN 50 PN 16/40 165 20 125 4 18
DN 80 PN 16/40 200 24 160 8 18
DN 100 PN 16 220 20 180 8 18
DN 150 PN 16 285 22 240 8 22
DN 200 PN 16 340 24 295 12 22
DN 250 PN 16 405 26 355 12 26
Flange connection acc. toANSI B16,5, RF
Flange HolesSize D b k No. d
2
2“ 150 lb 152,4 19,1 120,7 4 19,1
3“ 150 lb 190,5 23,9 152,4 4 19,1
4“ 150 lb 228,6 23,9 190,5 8 19,1
6“ 150 lb 279,4 25,4 241,3 8 22,4
8“ 150 lb 342,9 28,4 298,5 8 22,4
10“ 150 lb 406,4 30,2 362 12 25,4
26
VEGAPULS 66 standpipe antenna
Level measurement – RadarDimensions
337
Flange connection acc. to DIN 2501, seal ledgeacc. to DIN 2526 Form D
Flange Holes AntennaSize D b k No. d
2x y
DN 50 PN 16/40 165 20 125 4 18 – –
DN 80 PN 16/40 200 24 160 8 18 75 75
DN 100 PN 16 220 20 180 8 18 96 113
DN 150 PN 16 285 22 240 8 22 146 205
DN 200 PN 16 340 24 295 12 22 196 296
DN 250 PN 16 405 26 355 12 26 242 380
Flange connection acc. to ANSI B16,5, RFFlange Holes Antenna
Size D b k No. d2
x y
2“ 150 lb 152,4 19,1 120,7 4 19,1 – –
3“ 150 lb 190,5 23,9 152,4 4 19,1 75 75
4“ 150 lb 228,6 23,9 190,5 8 19,1 96 113
6“ 150 lb 279,4 25,4 241,3 8 22,4 146 205
8“ 150 lb 342,9 28,4 298,5 8 22,4 196 296
10“ 150 lb 406,4 30,2 362 12 25,4 242 380
Top Related