Interface integration (1/2) (IP over ETH)Enable/Interrogate IP forwarding for ICSU and NPGEZQRT ZQRH
Interrogate/Create VLAN for every IFGE in NPGE(P)ZQRM ZQRE
Interrogate/Define IFGE NPGE(P) IP address (if IFGE in VLAN define VLAN IP address)ZQRN ZQRI
Interrogate/Create QoS profile ZQ8LZQ8B
SIGNALLINGUSER DATA O&M
?
Interrogate/Add IP based route identifier (IUPS, IUCS, IUB)ZQRU ZQRL
MTP SERVICES
OWN SPC
ZNPC
ZNRP
ZNPI
ZNRI
Interrogate/Create internal ICSU loopback IP address for SCTP Multi-Homing
Interrogate/Define internal ICSU interface AAx IP address towards IFGE NPGE(P)
ZQRN
ZQRN
ZQRI
ZQRI
Interrogate/Create internal IFAI NPGE(P) interface IP address towards AAx ICSU
Interrogate/Create static route IFAI/IFGE NPGE(P) -> MSS/SGSN via Gateway (Cisco Router)
Define QoS profile for Eth interfaceZQ8S
ZQRN ZQRI
ZQKBZQKC
Interrogate/Create static route ICSU -> MSS/SGSN via gateway (IFAI/IFGE NPGE(P)) ZQKBZQKC
Interrogate/Define internal IPoATM interfaces (IFAIx/IFGEx/AAx/LOx)ZQMC ZQMQ
SIGNALLING USER DATA
O&M
Interrogate/Create logical interface for subnet whose is responsible for SIG
on IUB (AA and IFAI addressing instead using the procedure above)
ZQMN
Interrogate/Create static route from ICSU to IFAI of NPGEPZQKC ZQKB
Iub
only Iu
ZQML
Iu
Interface integration (2/2) (IP over ETH)
Interrogate/Create IP signalling link set
Interrogate/Create signalling route set
Interrogate/Allow activation and activate signalling link state
Interrogate/Allow activation and activate signalling route set
Interrogate/Define local & remote subsystem
Interrogate/Activate local & remote SCCP
Interrogate/Activate local & remote subsystem
BROADCASTING
ZNSP
ZNRC
ZNFD
ZNGC
ZNHC
ZOBM; ZOBC
ZNSI
ZNRI
ZNLI
ZNVI
ZNFI; ZNFJ
ZNGI
ZNHI
ZOBI; ZOBL
ZNLA & ZNLC
Interrogate/Create association set
Interrogate/Add association in ass set
Interrogate/Configure source IP address for SCTP
ZOYC
ZOYA
ZOYN
ZOYI
ZOYL
ZOYI
Interrogate/Manage Association IP addressZOYP ZOY
Interrogate/Modify Association stateZOYS ZOY
ZNVA & ZNVC
Interrogate/Configure IP based route networkZQRC ZQRL
Interrogate/Create a static route from
NPGE(P) IFGE to IUB UP&CP with GATEWAY
(Cisco Router) for CP&UP
ZQKC ZQKB
Interrogate/Create a static route from
NPGE(P) IFGE to BTS TRS with GATEWAY (Cisco
Router) for ToP
ZQKC ZQKB
Create object IUPS/ IUCS (AL) (insert the
IU-PS/IU-CS UP IP address)
Create IPNB, WBTS, FMCS, WCEL object
Create IPQM object for Diffserve DSCP
selection
Define RNC object(i.e. RNC id : 26name : RNC26)
Iub:
MM
L co
mm
ands
IP address for OMU AAx Interface
Interrogate/Create a static route from OMU AAx to WTBS IP Address via gateway
(IFAI0 of NPGEP)•IF IS USED ESA24 the command will be used for specifing the SITE ROUTER and
ROUTING DESTINATION
ZQRN
ZQKC
ZQRI
ZQKB
Iu:
APPL
ICAT
ION
LA
UN
CHER
SIGNALLING USER DATAO&M
Application Launcher
•Start Application Launcher– NE: OMS IP address– Login: Nemuadmin– Password: nemuuser
•Start RNC Object Browser
Object Browser View
•Read/modify RNC object settings
•Read/modify WBTS object settings
•Read/modify HOPS object settings
•Read/modify FMC object settings
•Read/modify COCO object settings
RNC Object
•Set the RNC ID
•Set the RNC Name
RNC Object
•Configure digit analysis tree index for Iub and Iur interfaces
•Define A2EA (AAL type 2 Endpoint Address) for the RNC in AESA format
RNC Object (Handover and Power Control)
RNC Object (Admission Control)
RNC Object (Packet Scheduler)
Frequency Measurement Control (FMC) Object
•Set the FMC ID
•FMC is a logical object which includes a collection of parameters to control measurements for different types of handovers
– FMCS– FMCI– FMCG
Handover Path (HOP) Object
•HOP is a logical object, which includes a collection of parameters for controlling different types of handovers
– HOPS– HOPI– HOPG
•Set the HOP ID
WBTS Object
•Click to set defaults for all parameters
•Click to select view
•Click to add new WCELL
WBTS Object
•Define WBTS ID
•Set WBTS name
•Specify related COCO ID/CNBAP ID
•Select COCO ID or CNBAP link ID
WBTS Object
WCEL Object
•Define Local Cell Resource ID
•Define Cell ID
•Define LAC, SAC, RAC
•Select UTRA Absolute Frequency Channel number (UARFCN)
•Select Circuit and Packet Switched core networks
•Define primary DL scrabbling code•Select Cell range
•Select frame timing offset of a cell
WCEL Object
•Select UTRAN Registration Area ID
WCEL Object (Handover control)
•Select real time FMC ID
•Select non real time FMC ID
WCEL Object (Power Control)
WCEL Object (Load Control)
WCEL Object (Admission Control)
•Select WRAB object
WRAB Object
WCEL Object (Packet Scheduler)
IPQM Object
IPNB Object
TQM Object
IUCS (1/2)
IUCS (2/2)
IUPS (1/2)
IUPS (2/2)
IUB (IPNB)
Top Related