INSPECTION ANDACCEPTANCE CRITERIA

PRODUCT CONFORMANCE

Dimensional conformance - within tolerances as defined on product drawing

Structural conformance - defined by "Acceptance Criteria"

PROCESS SPECIFICATION FOR VISUAL INSPECTION OF COMPOSITE PARTS

link to document

NONCONFORMING (REJECT) PART

Quality Assurance applies acceptance criteria during in-process inspection, final inspection, and/or field inspection → part may be discrepant (defective) and rejected

Discrepancy report (DR) written Requires disposition (in accordance with

standard repair procedure or by MRB/Engineering)

Part to be– reworked– repaired– scrapped