Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Register issued on : 2017-12-01
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector A : SERVICES
Register issued on : 2017-12-01
Page 3Subsector A01: TOURIST SERVICES
Subsector : A01 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027256/0001 Project Established
ICS : 03.080.30, 03.200National Ref : ÖNORM D 1150Title : Services of the leisure industry - Requirements for the training of dance teachers and
dance masters as well as for the management of ballroom dance schoolsScope : This ÖNORM sets minimum requirements for the training and exam of dance teachers and
dance masters as well as for the management of a dance school (facilities and curriculum).
Relatedness :National : New
** End of Subsector **
Subsector A05: MAINTENANCE SERVICES
Subsector : A05 Registration Date : 2017-11-09Organization : NENCountry : Netherlands
Project ID : 50002055/0001 Project Established
ICS : 97.020National Ref : NEN 2075:2017 nlTitle : Measuring system and process control system for cleaning performance Scope : This standard describes the measurement of quality for cleaning performance according to
objective criteria. With this sytem the performed quality can be compared with the prescribed quality.
Relatedness :National : New
** End of Subsector **
Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t1012426/0002 Project Established
ICS : 03.080.30, 11.040National Ref :Title : Competent services - Medical devices - Rules Scope :
This standard includes rules for management technical equipment structrural characteristics and personnel characteristics of the compenent services of medical equipments
Relatedness :National : New
Subsector : A11 Registration Date : 2017-11-17
Page 4
Organization : TSECountry : Turkey
Project ID : t1013011/0001 Project Established
ICS : 03.080.30, 11.040.30National Ref :Title : Competent services – Surgical instruments – RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel
specifications and certification of competent services of surgical instruments used in health sector
Relatedness :National : New
Subsector : A11 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t1013703/0002 Project Established
ICS : 03.080.30, 11.040National Ref :Title : Private services - Medical devices - Rules Scope : This standard includes rules for management, structural features, technical equipment,
personnel specifications and certification of special services for medical devices
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603735/0001 Project Established
ICS : 03.100.30National Ref : UNI1603735Title : Non-regulated professions - Professional profiles Human resources - Knowledge, skill
and competence requirementsScope : This standard specifies the requirements for the professional profiles Human resources, in
terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 5
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2017-12-01
Page 6Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027261/0001 Project Established
ICS :91.010.30, 91.080.40, 93.040
National Ref : ÖNORM B 1992-2Title : Eurocode 2 - Design of concrete structures - Part 2: Concrete bridges - Design and
detailling rules - National specifications concerning ÖNORM EN 1992-2, national comments and national supplements
Scope : This Austrian Standard specifies national parameters to ÖNORM EN 1992-2 and shall be applied jointly with ÖNORM EN 1992-2 in Austria. This standard describes the principles and requirements for safety, serviceability and durability of concrete structures, together with specific provisions for bridges.
Relatedness :National : New
Subsector : B02 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603704/0001 Project Established
ICS :91.060.40, 91.140.01, 97.100.30, 97.100.40
National Ref : UNI1603704Title : In-service installations for civil use powered by liquid and solid fuel - Guidelines for
verifying suitability for safe operationScope : The standard establishes the criteria for verifying that the safety requirements of in-service
installations powered by solid and/or liquid fuels are fulfilled, regardless of the time of their installation, in order to determine whether the verified plant can continue to be used in its currentstate,withoutcompromisingsafety.The standard deals exclusively with the aspects of verification of installations and therefore it cannotbeusedasadesignstandard,norasaninstallationstandardorforretrofitting.The standard applies to domestic heating and/or cooking systems powered by liquid or solid fuel, with or without the production of domestic hot water, including the works for the evacuation of combustion products.
Relatedness :National : New
Subsector : B02 Registration Date : 2017-11-06Organization : UNMZ Draft Issue Date : 2017-09-19Country : Czech Republic Latest Date for Comments : 2017-10-31
Project ID : 65000417/0002 Project Established
ICS :National Ref :Title :
Bitumen and bituminous binders – Modified bitumens – Part 2: Crumb rubber modified bitumens
Scope : This standard contains the requirements of the Czech Republic for modified asphalt binders
Page 7
usedinroadconstruction.Thisstandardconsistsofthreeparts:Part1:PolymersmodifiedbitumensPart2:CrumbrubbermodifiedbitumensPart3:SpecialmodifiedbitumenČSN657222-2specifiestypesofbitumensmodifiedwithcrumbrubber.Aninternationalstandard has not yet been developed for this part 2, only the draft CEN / TC 336 / N 689 that has been taken into account.
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2017-11-27Organization : SNV Draft Issue Date : 2017-11-16Country : Switzerland Latest Date for Comments : 2018-01-31
Project ID : CH170022/0001 Draft for public enquiry
ICS : 91.080.30National Ref : SIA 179Title : Fixings in concrete and masonry
Relatedness :National : REV/AMD SIA 179:1998
Subsector : B03 Registration Date : 2017-11-27Organization : SNV Draft Issue Date : 2017-11-23Country : Switzerland Latest Date for Comments : 2018-02-16
Project ID : CH170023/0001 Draft for public enquiry
ICS : 91.080.40National Ref : SIA 262/1Title : Concrete Structures – Supplementary specifications
Relatedness :National : REV/AMD SIA 262/1:2013
** End of Subsector **
Subsector B04: CEMENT
Subsector : B04 Registration Date : 2017-11-24Organization : TSECountry : Turkey
Project ID : t0116141/0001 Project Established
ICS : 91.100.10National Ref :Title : Principles of Bulk Cement TransportationScope : This standard specifies the principles of transferring cement from the production line to the
transporting vehicle, transportation and preservation of the quality of bulk cement during these stages.
Page 8
Relatedness :National : New
** End of Subsector **
Subsector B13: SOLAR ENERGY
Subsector : B13 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027269/0001 Project Established
ICS : 91.140.10National Ref : ÖNORM M 7510-8Title : Checking of heating systems -- Part 8: Basic check of thermal solar systemsScope : The actual ÖNORM is to be used for basic checks of heating and warmwater Systems
combined with a thermal solar Systems and is only valid for the parts of the thermal solar system. The actual check described in this ÖNORM helps evaluating the correct functioning.
Relatedness :National : New
** End of Subsector **
Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY
Subsector : B17 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027264/0001 Project Established
ICS : 93.080.40National Ref : ÖNORM O 1051Title : Road lighting - Lighting of conflict areasScope : ÖNORM O 1051 is applicable to the construction of lighting system for safety crosswalk and
cyclists, roundabouts, divisional island and parking areas. Furthermore, Annex provides information on crossroads and lay-bys.
Relatedness :National : New
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 03200806/0001 Project Established
ICS :National Ref : 03200806Title : Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements
and testing
Relatedness :
Page 9
National : New
Subsector : B25 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 03200808/0001 Project Established
ICS :National Ref : 03200808Title : Gaskets for gas supply - Part 6: Gasket materials based on fibres, graphite or
polytetrafluoroethylene (PTFE) for gas valves, gas appliances and gas mains
Relatedness :National : New
Subsector : B25 Registration Date : 2017-11-10Organization : NSAICountry : Ireland
Project ID : NSAI1018/0001 Project Established
ICS : 91.140.40National Ref : I.S. 820:201xTitle : Non-domestic gas installations (Edition 3)Scope : This Irish Standard specifies the requirements for natural gas and LPG installations in
commercial and public access buildings at maximum operating pressures not exceeding 5 bar and industrial gas installations at maximum operating pressures not exceeding 0,5 bar, from the point of delivery up to and including the appliance(s) in non-domestic premises.
Relatedness :National : REV/AMD I.S. 820:2010
Subsector : B25 Registration Date : 2017-11-06Organization : NSAICountry : Ireland
Project ID : NSAI1026/0002 Project Established
ICS : 23.040.99National Ref : I.S. 328-2:201x Title : Gas transmission - Part 1, InstallationsScope : SeparationofcurrentparttwoofI.S.328intoaseparatestandard.
This Standard applies to the design, construction, inspection, testing, operation and maintenance of installations on pipelines used for the transmission of first and second family gases, i.e., manufactured towns gas, natural gas and substitute natural gas at maximum operatingpressureover16barandtemperaturesbetween-25oCand+120oCPipeline installations include but are not restricted to pressure-reduction stations, meter stations, pig-trap stations and block valves. Compressor stations and compressed gas filling stationsareexcluded.If the inlet pipework of the station is a service line and the maximum upstream operating pressure does not exceed 16 bar and the design flow rate is equal to or less than 200 m3/h undernormalconditions,EN12279applies.This Standard relates to conditions and practices currently in use in the transmission of gas. In addition materials and techniques of construction and operation are constantly being
Page 10
improved. It is intended to keep these factors under continuous review. As a result amendments and supplements may be issued by the National Standards Authority of Ireland (NSAI)fromtimetotime.All activities covered by this code in relation to gas transmission pipelines and installations should comply with the requirements of all relevant safety, planning and environmental legislation.
Relatedness :National : REV/AMD I.S. 328:2015
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2017-11-13Organization : ASROCountry : Romania
Project ID : 0NP187.2/0001 Project Established
ICS :National Ref :Title : Storable bituminous mixtures. Material specifications
Relatedness :National : New
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2017-11-08Organization : SIST Draft Issue Date : 2018-01-01Country : Slovenia Latest Date for Comments : 2018-02-08
Project ID : 00005515/0001 Project Established
ICS : 91.100, 91.100National Ref : oSIST 1031:2017Title : Flexible sheets for waterproofing - Bitumen sheets for waterproofing – RequirementsScope : SIST 1031 defines national requirements which supplement European standards and which
are not in conflict with them. The standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country.
Relatedness :National : New
Subsector : B27 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603784/0001 Project Established
ICS : 91.060.20National Ref : UNI1603784Title : Discontinuous roofing – Design criteria – Waterproofing elementScope : The standard takes in consideration the behaviour requirements of the waterproofing
element in a discontinuous roofing according to the effects and actions of the internal or
Page 11
external agents. The standard provides a guidance for design of the element.
Relatedness :National : REV/AMD UNI 9308-1:1988
Subsector : B27 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603785/0001 Project Established
ICS : 91.060.20National Ref : UNI1603785Title : Building – Roofing – Terminology and classification of functional schemes, conform
solutions and technological solutions of discontinuous roofingScope : The standard show, defines and classifies the discontinuous roofing functional schemes,
reports the matrix of complying solutions and identifies the main conditions of characteristics design of the roofing complying solutions.
Relatedness :National : REV/AMD UNI 8627:2012
Subsector : B27 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603786/0001 Project Established
ICS : 91.060.20National Ref : UNI1603786Title : Builiding – Roofings – Analysis of functional components of discontinuous roofing and
design specifications for definition of technological solutionsScope : This standard provides instructions for design and choice of elements and layers of
discontinuous roof cooverings.
Relatedness :National : REV/AMD UNI 8178:2012
Subsector : B27 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603836/0001 Project Established
ICS : 91.060.20National Ref : UNI1603836Title : Building – Roofing – Terminology and classification of functional schemes, conform
solutions and technological solutions of continuous roofingScope : The standard show, defines and classifies the continuous roofing functional schemes, reports
the matrix of complying solutions and identifies the main conditions of characteristics design of the roofing complying solutions.
Relatedness :National : REV/AMD UNI 8627:2012
** End of Subsector **
Page 12Subsector B32: PRECAST CONCRETE PRODUCTS
Subsector : B32 Registration Date : 2017-11-28Organization : NBNCountry : Belgium
Project ID : BE664050/0001 Project Established
ICS : 91.100.30National Ref : prNBN B 21-606:2017Title : Precast concrete products – Floor plates – National application document to NBN EN
13747+A2:2010 and to NBN EN 15050+A1:2012
Relatedness :National : REV/AMD NBN B 21-606:2012European : Not Equivalent to EN 13747:2005+A2:2010
Subsector : B32 Registration Date : 2017-11-28Organization : NBNCountry : Belgium
Project ID : BE664050/0001 Project Established
ICS : 91.100.30National Ref : prNBN B 21-606:2017Title : Precast concrete products – Floor plates – National application document to NBN EN
13747+A2:2010 and to NBN EN 15050+A1:2012
Relatedness :National : REV/AMD NBN B 21-606:2012European : Not Equivalent to EN 15050:2007+A1:2012
Subsector : B32 Registration Date : 2017-11-28Organization : NBNCountry : Belgium
Project ID : BE664051/0001 Project Established
ICS : 91.100.30National Ref : prNBN B 21-612:2010/prA1:2017Title : Precast concrete products – Wall elements – National application document to NBN EN
14992+A1:2012
Relatedness :National : REV/AMD NBN B 21-612:2010European : Not Equivalent to EN 14992:2007+A1:2012
** End of Subsector **
Subsector B33: BUILDING DESIGN
Subsector : B33 Registration Date : 2017-11-28Organization : LVSCountry : Latvia
Project ID : 00058759/0001 Project Established
ICS : 91.080National Ref : prLVS 1053Title : Independent verification of construction design. Structural design checking.Scope : The standard regulates procedures for carrying out expert examination of building’s
structural components. The document describes the compulsory checking procedures and
Page 13
the scope of office calculations stemming from the respective class of the building in question. The aim of the standard is to promote the standardization of the expertise process of the building structural units, making this process transparent and understandable to all the participants in the construction process.
Relatedness :National : New
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027254/0001 Project Established
ICS : 91.100.50National Ref : ÖNORM B 3662Title : Flexible sheets for waterproofing - Underlays for walls - National implementation of
ÖNORM EN 13859-2Scope : This standard is used for the implementation of ÖNORM EN 13859-2; It determines in clause
5 the minimum technical requirements for flexible sheets for waterproofing as underlays for discontinuous underlays for walls in terms of basic usability in Austria. The specific requirements for bitumen and plastic sheets that come in Austria for the application are in clause 6 and clause 7.
Relatedness :National : New
Subsector : B99 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027262/0001 Project Established
ICS : 91.100.50National Ref : ÖNORM B 3667Title : Flexible sheets for waterproofing - Synthetic vapour control layers - National
implementation of ÖNORM EN 13894Scope : This ÖNORM serves for implementation of the ÖNROM EN 13984. It determines in clause 5
the technical minimum-requirements for Synthetic vapour control layers in regarding to the in principal usability in Austria. The specific requirements on Synthetic sheets, which are used in Austria, are in clause 6.
Relatedness :National : New
Subsector : B99 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027263/0001 Project Established
ICS : 91.100.50National Ref : ÖNORM B 3668
Page 14
Title : Flexible sheets for waterproofing - Synthetic damp proof courses - National implementation of ÖNORM EN 14909
Scope : This ÖNORM serves for implementation of the ÖNROM EN 14909. It determines in clause 5 the technical minimum-requirements for Synthetic damp proof courses in regarding to the in principal usability in Austria. The specific requirements on Synthetic sheets, which are used in Austria, are in clause 6.
Relatedness :National : New
Subsector : B99 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027274/0001 Project Established
ICS : 91.100.23National Ref : ÖNORM B 3407Title : Planing and execution of laying of tiles, flags and mosaicsScope : This Austrian Standard includes rules for design and execution of laying of tiles, flags and
mosaicsintheinteriorandexterioralsoonheatingfloorscreeds.ThewaterproofingforbuildingsisregulatedinÖNORMB3691andÖNORMB3692.ThecleaningservicesareregulatedinÖNORMD2210.The requirement for slipping is defined in ÖNORM Z 1261.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 15
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2017-12-01
Page 16Subsector C01: Food products
Subsector : C01 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 05701991/0001 Project Established
ICS : 07.100.30National Ref : DIN 10164-1Title : Microbiological examination of meat and meat products - Determination of
Enterobacteriaceae - Part 1: Spatula method (reference method)
Relatedness :National : New
Subsector : C01 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 05701992/0001 Project Established
ICS : 07.100.30National Ref : DIN 10164-2Title : Microbiological examination of meat and meat products - Determination of
Enterobacteriaceae - Part 2: Drop plating method
Relatedness :National : New
Subsector : C01 Registration Date : 2017-11-20Organization : LSTCountry : Lithuania
Project ID : 10002574/0001 Project Established
ICS : 67.120.10National Ref :Title : Meat productsScope : This standard gives general quality requirements for human consumption meat products
supplied to the market.
Relatedness :National : New
Subsector : C01 Registration Date : 2017-11-15Organization : SNCountry : Norway
Project ID : NOT17034/0001 Project Established
ICS : 67.120.30National Ref : NS 9444Title : Fish and fish products - Norwegian filet of white fish, frozen at sea - Product
requirementsScope : This standard specifies requirements and documentation of filet frozen at sea of white fish
with and without skin, with and without bones and with different cutting pattern
Page 17
Relatedness :National : New
Subsector : C01 Registration Date : 2017-11-24Organization : TSECountry : Turkey
Project ID : t3013645/0001 Project Established
ICS : 67.060National Ref :Title : Turkish BaklavaScope : This standard specifies Turkish Baklava
Relatedness :National : New
** End of Subsector **
Subsector C02: PAINTS AND RELATED PRODUCTS
Subsector : C02 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 07800635/0001 Project Established
ICS : 87.060.10National Ref : DIN 55912-2Title : Pigments - Titanium dioxide pigments - Part 2: Analytical methods
Relatedness :National : New
** End of Subsector **
Subsector C99: UNDETERMINED
Subsector : C99 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 01200612/0001 Project Established
ICS : 71.120.10National Ref : DIN 28125-1Title : Round hinged closures - Part 1: Nominal diameter DN 150 to DN 800
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 18
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2017-12-01
Page 19Subsector F99: UNDETERMINED
Subsector : F99 Registration Date : 2017-11-09Organization : NENCountry : Netherlands
Project ID : 50002051/0001 Project Established
ICS : 29.240.01, 91.140.50National Ref : NEN 9191:2017 Concept nlTitle : Energy efficiency of low voltage installations Scope : NEN 9191 gives additional requirements, measures and recommendations for the design, the
construction and verfification of electrical low-voltage installations among which the local production and storage of energy for more efficiënt use of electricity.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 20
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE
Register issued on : 2017-12-01
Page 21Subsector H09: FURNITURE
Subsector : H09 Registration Date : 2017-11-24Organization : TSECountry : Turkey
Project ID : tst05729/0001 Project Established
ICS : 97.130.10, 97.140National Ref :Title : Steel single tier bolted shelvingScope : This standard covers steel cabinets up to 1000 mm x 400 mm table dimension.
Relatedness :National : New
** End of Subsector **
Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES
Subsector : H19 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027259/0001 Project Established
ICS : 97.100.30National Ref : ÖNORM B 8311Title : Installation and construction of domestic heat generating systemsScope : This ÖNORM contains requirements for the installation and assembly of small furnaces
(heating appliances) for solid and liquid fuels up to maximum 50 kW of nominal heat output. These requirements apply to heating appliances according to of ÖNORM EN 1, ÖNORM EN 12815, ÖNORM EN 13229, ÖNORM EN 13240, ÖNORM EN 14785 and ÖNORM EN 15250 as well as to individually planned plants according to ÖNORM EN 15544.
Relatedness :National : New
** End of Subsector **
Subsector H26: SEALING MATERIALS
Subsector : H26 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 03200807/0001 Project Established
ICS :National Ref : 03200807Title : Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas
armatures and gas appliances; safety requirements, tests
Relatedness :National : New
Subsector : H26 Registration Date : 2017-11-17Organization : DINCountry : Germany
Page 22
Project ID : 03200809/0001 Project Established
ICS :National Ref : 03200809Title : Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic
foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector H27: EDUCATIONAL EQUIPMENT
Subsector : H27 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 09500451/0001 Project Established
ICS :National Ref : 09500451Title : Satchels - Requirements and testing
Relatedness :National : New
** End of Subsector **
Subsector H30: EQUIPMENT FOR CHILDREN
Subsector : H30 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603279/0001 Project Established
ICS : 97.190National Ref : UNI1603279Title : Child use and care articles - Baby carriers - Safety requirements and test methods –
Baby slingsScope : This Standard specifies the safety requirements and test methods for baby slings without a
framedsupportdesignedtocarryachildwhenattachedtothecarer’storso.This standard applies to the following product categories: baby wrap; one-shoulder baby sling;meitai.This Standard does not apply to products covered by EN 13209-2. Baby slings are designed to allow the carer a hands free operation when standing and/or walking. These slings are for useuptoamaximumweightof18kg.
Relatedness :National : New
Subsector : H30 Registration Date : 2017-11-28Organization : UNICountry : ItalyProject ID : 01603838/0001 Project
Page 23
EstablishedICS : 97.190National Ref : UNI1603838Title : Child use and care articles - Baby carriers - Safety requirements and test methods – Soft
carrier without incorporated integral leg openingsScope : This Standard specifies the safety requirements and test methods for soft carriers without a
framed support and without incorporated integral leg openings designed to carry a child whenattachedtothecarer’storso.This Standard does not apply to products covered by EN 13209-2. Children slings are designed to allow the carer a hands free operation when standing and/or walking. These slingsareforuseuptoamaximumweightof18kg.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 24
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector I : MECHANICAL ENGINEERING
Register issued on : 2017-12-01
Page 25Subsector I02: FASTENERS
Subsector : I02 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 02001089/0001 Project Established
ICS : 21.060.70National Ref : DIN 3016-1Title : Fastening clamps - Part 1: With tongue
Relatedness :National : New
Subsector : I02 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06702299/0001 Project Established
ICS :National Ref : 06702299Title : Round wire snap rings for shafts
Relatedness :National : New
Subsector : I02 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06702300/0001 Project Established
ICS :National Ref : 06702300Title : Round wire snap rings for bores
Relatedness :National : New
Subsector : I02 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06702301/0001 Project Established
ICS :National Ref : 06702301Title : Snap rings with rectangular profile for shafts
Relatedness :National : New
Subsector : I02 Registration Date : 2017-11-17Organization : DIN
Page 26
Country : Germany
Project ID : 06702302/0001 Project Established
ICS :National Ref : 06702302Title : Snap rings with rectangular profile for bores
Relatedness :National : New
** End of Subsector **
Subsector I04: ROLLING BEARINGS
Subsector : I04 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027270/0001 Project Established
ICS : 21.100.20National Ref : ÖNORM M 6320-1 Beiblatt 2Title : Rolling bearings - Explanation of the calculation method of the dynamic load rating and
basic rating lifeScope : This supplement provides additional background information on the derivation of formulas
and factors specified in ÖNORM M 6320-1 and ISO 281-1:2007 " Rolling bearings - Dynamic load ratings and rating life".
Relatedness :National : New
** End of Subsector **
Subsector I06: PRESSURE VESSELS
Subsector : I06 Registration Date : 2017-11-27Organization : LVS Draft Issue Date : 2017-11-28Country : Latvia Latest Date for Comments : 2018-01-26
Project ID : 00058767/0001 Draft for public enquiry
ICS : 23.020.30National Ref : prLVS 416Title : Boiler equipment. Safety examination of existing assembliesScope : Standart defines the procedures of the technical supervision of the new and used boilers
installations. Standart is rrelevant relevant to the inspection`s institutions what according with the normative acts carry out the technical supervision. Sandart allows to make controls and defines the safety level of the boilers installation.
Relatedness :National : REV/AMD LVS 416:2012
Subsector : I06 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603813/0001 Project Established
Page 27
ICS : 23.020.30, 27.060.30National Ref : UNI1603813Title : Pressure equipment - Putting into service and use of pressure equipment and assemblies
- Part 10: Supervision of steam boilers and/or super-heated water generators excluded from the scope of UNI/TS 11325-3
Scope : This technical specification provides procedures for the supervision of fired or otherwise heated pressure equipment with the risk of overheating, intended for generation of steam and/or super-heated water at temperatures higher than 110 °C (“steam boilers and/or hot water generators”) at a maximum allowable pressure PS greater than 0,5 bar included in the scope of the Italian decree D.M. 329/2004 and excluded from the scope of UNI/TS 11325-3, and,also,havingthefollowingrequirements:a) unfired steam boilers and/or hot water generators in which the design temperature of the pressure bearing parts, that will come into contact with the heating fluid, is not lower than theheatingfluiditself;b)lowcapacityforced-circulationsteamboilersand/orhotwatergeneratorshavingPSxV≤3000bar·LandPS≤12bar;c)lowpressuresteamboilershavingPS≤1bar,heatingarea≤100m2andcapacity≤2t/h;d)lowpressurehotwatergeneratorshavingPS≤5bar,watermaximumtemperature≤120°Candcapacity≤2t/h;e)electricallypoweredsteamboilersand/orhotwatergenerators.The technical specification gives recommendations of operation and testing of the boiler both with and without the continuous presence of the boiler attendant, with a maximum time of operation without manual intervention of 72 hours.
Relatedness :National : New
** End of Subsector **
Subsector I13: GAS CONTAINERS
Subsector : I13 Registration Date : 2017-11-10Organization : NSAICountry : Ireland
Project ID : NSAI1023/0001 Project Established
ICS : 75.160.30National Ref : I.S. 3213:201xTitle : Code of Practice for the Storage of LPG Cylinders and CartridgesScope : This code applies to the keeping of LPG in containers where the total quantity stored
exceeds 15kg, but the general principles may be used when keeping smaller quantities. It also applies to containers on loaded vehicles parked other than on a public highway. The requirements of the Building regulations shall take precedence over any requirements of this Code.The contents of this document represent the general requirements for the safe storage of LPG cylinders and cartridges. However in specific circumstances the fire authorities may find it necessary ti impose additional safeguards.
Relatedness :National : REV/AMD I.S. 3213:1987
** End of Subsector **
Subsector I19: NUCLEAR ENERGY
Subsector : I19 Registration Date : 2017-11-21
Page 28
Organization : ASICountry : Austria
Project ID : 00027265/0001 Project Established
ICS : 11.040.50National Ref : ÖNORM S 5240-12Title : Image quality assurance in X-ray diagnosis - Part 12: Acceptance testing of
mammographic X-ray equipmentScope : This ÖNORM contains parameter for acceptance testing of digital mammography systems,
describes testing methods, and defines extreme values as well as testing periods.
Relatedness :National : New
Subsector : I19 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027266/0001 Project Established
ICS : 11.040.50, 11.060.20National Ref : ÖNORM S 5240-5Title : Image quality assurance in X-ray diagnostics - Part 5: Constancy test in dental
radiographic technologyScope : This ÖNORM describes the constancy test in dental radiographic technology.
Relatedness :National : New
Subsector : I19 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027267/0001 Project Established
ICS : 11.040.50National Ref : ÖNORM S 5240-11Title : Image quality assurance in X-ray diagnosis - Part 11: Acceptance testing of dental
radiographic equipment - Limit valuesScope : This ÖNORM describes testing methods, parameter, extreme values for acceptance testing
on analog and digital dental radiographic equipment including DVT and defines testing periods.
Relatedness :National : New
Subsector : I19 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027268/0001 Project Established
ICS : 11.040.50National Ref : ÖNORM S 5240-7Title : Image quality assurance in X-ray diagnostics - Constancy testing on medical X-ray
equipments for mammographyScope : This ÖNORM contains parameter for constancy testing of digital mammography systems,
Page 29
describes testing methods, and defines extreme values as well as testing periods.
Relatedness :National : New
** End of Subsector **
Subsector I99: UNDETERMINED
Subsector : I99 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 01200665/0001 Project Established
ICS :National Ref : 01200665Title : Dispense systems for draught beverages - Part 1: General requirements
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 30
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector N : NON-METALLIC MATERIALS
Register issued on : 2017-12-01
Page 31Subsector N01: PAPER AND BOARD
Subsector : N01 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t3012440/0001 Project Established
ICS : 85.080, 85.080.10National Ref :Title : Facsimile papersScope : This standard specifies the roll and sheet papers used to record in facsimile machines.
Relatedness :National : New
** End of Subsector **
Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235092/0001 Project Established
ICS :National Ref : 06235092Title : Lubricants - Lubricating oils - Part 3: Lubricating oils CLP, Minimum requirements
Relatedness :National : New
Subsector : N03 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235158/0001 Project Established
ICS :National Ref : 06235158Title : Testing of liquid fuels - Determination of bromine acceptance by electrometric Dead-
Stop-method of samples with a bromine acceptance of more than 0,5 g/100 g (BA)
Relatedness :National : New
Subsector : N03 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235260/0001 Project Established
ICS :National Ref : 06235260Title : Lubricants - Lubricating oils - Part 1: Lubricating oils C, Minimum requirements
Relatedness :National : New
Page 32
Subsector : N03 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235261/0001 Project Established
ICS :National Ref : 06235261Title : Lubricants - Lubricating oils - Part 2: Lubricating oils CL, Minimum requirements
Relatedness :National : New
Subsector : N03 Registration Date : 2017-11-24Organization : TSECountry : Turkey
Project ID : t4013369/0001 Project Established
ICS : 75.100National Ref :Title : Lubricating oils, industrial oils and related products (Class L) - Base oilsScope : This standard specifiee requirements and test methods for base oils
Relatedness :National : New
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235059/0001 Project Established
ICS : 59.080.30National Ref : DIN 53894-2Title : Testing of textiles - Determination of dimensional change of textile fabrics - Part 2:
Steaming on ironing machines
Relatedness :National : New
** End of Subsector **
Subsector N06: RUBBER
Subsector : N06 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027260/0001 Project Established
ICS : 83.060National Ref : ÖNORM ISO 2230
Page 33
Title : Rubber products - Guidelines for storage (ISO 2230:2002)Scope : This International Standard gives guidelines for the inspection, recording procedures,
packaging and storage of products, assemblies and components made from vulcanized or thermoplasticrubberpriortobeingputintocirculation.It is applicable to both solid and cellular rubber products prepared from dry raw rubber, latex or other sources.
Relatedness :National : New
** End of Subsector **
Subsector N09: PLASTICS
Subsector : N09 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 06235142/0001 Project Established
ICS :National Ref : 06235142Title : Testing of adhesives for metals and adhesively bonded metal joints - Determination of
the resistance to liquids
Relatedness :National : New
** End of Subsector **
Subsector N14: PLASTICS PIPES
Subsector : N14 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 05401941/0001 Project Established
ICS :National Ref : 05401941Title : Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for cable ducting -
Dimensions and technical delivery conditions
Relatedness :National : New
Subsector : N14 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 05401942/0001 Project Established
ICS :National Ref : 05401942Title : Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions
and technical delivery conditions
Relatedness :National : New
Page 34
** End of Subsector **
** End of Sector **
Information procedure Page 35
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2017-12-01
Page 36Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT
Subsector : S04 Registration Date : 2017-11-27Organization : SIS Draft Issue Date : 2018-01-23Country : Sweden Latest Date for Comments : 2018-01-23
Project ID : 08760123/0001 Project Established
ICS : 11.140National Ref : 8760123Title : Health care textiles - Dress for staffScope : This standard specifies requirements, design and cutting patterns for dress for stafff in health
care.
Relatedness :National : New
Subsector : S04 Registration Date : 2017-11-27Organization : SIS Draft Issue Date : 2018-01-23Country : Sweden Latest Date for Comments : 2018-01-23
Project ID : 08760125/0001 Project Established
ICS : 11.140National Ref : 8760125Title : Health care textiles - Maternity trousers for staffScope : This standard specifies requirements, design and cutting patterns for maternity trousers for
staff in health care.
Relatedness :National : New
** End of Subsector **
Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT
Subsector : S07 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603600/0001 Project Established
ICS : 11.040.10National Ref : UNI1603600Title : Pipeline systems for compressed medical gases and vacuum - Terminal units for
compressed medical gases and vacuumScope : This standard applies to terminal units in compliance with UNI EN ISO 9170-1 that are
intended to be used in pipeline systems for compressed medical gases and vacuum. This standard specifies dimensions of probes, sockets and gas specific connections points.
Relatedness :National : REV/AMD UNI 9507:2004;UNI 9507:2004
** End of Subsector **
Subsector S08: AIR QUALITY
Subsector : S08 Registration Date : 2017-11-09Organization : NEN
Page 37
Country : Netherlands
Project ID : 50002053/0001 Project Established
ICS : 81.060.30National Ref : NEN 9102:2017 Concept nlTitle : Ceramic fibres - Determination of the presence and the concentration of respirable
refractory ceramic fibres Scope : NEN 9102 describes a method for: - the sampling and determination of the presence of
respirable refractory ceramic fibres; - the sampling and determination of the presence of the concentration of and exposure to respirabe refractory ceramic fibres.
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11904269/0001 Project Established
ICS :National Ref : 11904269Title : German standard methods for the examination of water, waste water and sludge - Sludge
and sediments (group S) - Part 18: Determination of adsorbed organically bound halogens (AOX) (S 18)
Relatedness :National : New
Subsector : S09 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11904271/0001 Project Established
ICS :National Ref : 11904271Title : German standard methods for the examination of water, waste water and sludge - Sludge
and sediments (group S) - Part 15: Determination of the specific residual beta activity a<(Index)R><Index beta>in sludge, sediment and suspended matter (S 15)
Relatedness :National : New
Subsector : S09 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11904272/0001 Project Established
ICS :National Ref : 11904272Title : German standard methods for the examination of water, waste water and sludge - Sludge
and sediments (group S) - Part 22: Determination of dry residue by freezing and
Page 38
preparation of the freeze dried mass of sludge (S 22)
Relatedness :National : New
Subsector : S09 Registration Date : 2017-11-09Organization : NENCountry : Netherlands
Project ID : 50002052/0001 Project Established
ICS : 13.060.70National Ref : NEN 9406:2017 Concept nlTitle : Water - Methods in hydrobiology - Field analyses of macrofytes Scope : NEN 9406 describes the method for the analysis of samples of macrofytes in the field, the
processing of the collected data and the reporting of the metadata.
Relatedness :National : New
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027257/0001 Project Established
ICS : 13.080.10National Ref : ÖNORM L 1087Title : Chemical analysis of soils - Determination of "plant-available" phosphorus and potassium
by the calcium-acetate-lactate (CAL)-methodScope : This Austrian Standard is used for the determination of the von "plant-available" phosphorus
and potassium in soils with pH >= 6. Excepted are soils used for forestal purposes.
Relatedness :National : New
Subsector : S24 Registration Date : 2017-11-21Organization : ASICountry : Austria
Project ID : 00027258/0001 Project Established
ICS : 13.080.20National Ref : ÖNORM L 1061Title : Physical analysis of soils - Determination of particle size distribution in mineral soilsScope : This ÖNORM is to be used for the determination of the mass fractions of grain size classes of
the mineral soil.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 39
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2017-12-01
Page 40Subsector T03: ROAD VEHICLES
Subsector : T03 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t1008646/0001 Project Established
ICS : 43.060.20National Ref :Title : Road Vehicles - Exhaust Pipes Muffler Scope : This standard covers exhaust pipes muffler used in road vehicles except motorcycle, moped,
tructors and military vehicles.
Relatedness :National : NewInternational : Modified SAE J 261:1987
Subsector : T03 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t1008646/0001 Project Established
ICS : 43.060.20National Ref :Title : Road Vehicles - Exhaust Pipes Muffler Scope : This standard covers exhaust pipes muffler used in road vehicles except motorcycle, moped,
tructors and military vehicles.
Relatedness :National : NewInternational : Modified SAE J 262:1987
Subsector : T03 Registration Date : 2017-11-17Organization : TSECountry : Turkey
Project ID : t1008646/0001 Project Established
ICS : 43.060.20National Ref :Title : Road Vehicles - Exhaust Pipes Muffler Scope : This standard covers exhaust pipes muffler used in road vehicles except motorcycle, moped,
tructors and military vehicles.
Relatedness :National : NewInternational : Modified SAE J 97:1987
** End of Subsector **
Subsector T09: MATERIALS HANDLING AND STORAGE EQUIPMENT
Subsector : T09 (Secondary Subsector)
Registration Date : 2017-11-24
Organization : TSECountry : Turkey
Project ID : t0116141/0001 Project Established
Page 41
ICS : 91.100.10National Ref :Title : Principles of Bulk Cement TransportationScope : This standard specifies the principles of transferring cement from the production line to the
transporting vehicle, transportation and preservation of the quality of bulk cement during these stages.
Relatedness :National : New
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11501223/0001 Project Established
ICS :National Ref : 11501223Title : Packaging test - Compression test - Part 1: Test with a constant conveyance-speed
Relatedness :National : New
Subsector : T14 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11501224/0001 Project Established
ICS :National Ref : 11501224Title : Packaging test - Leakage test on flexible packagings - Part 2: Colour method
Relatedness :National : New
Subsector : T14 Registration Date : 2017-11-17Organization : DINCountry : Germany
Project ID : 11501225/0001 Project Established
ICS :National Ref : 11501225Title : Packaging test - Leakage test on flexible packagings - Part 3: Pressure drop method
Relatedness :National : New
** End of Subsector **
Subsector T19: ROAD SAFETY
Page 42
Subsector : T19 Registration Date : 2017-11-13Organization : ASROCountry : Romania
Project ID : 001848-1/0002 Project Established
ICS : 93.080.01National Ref : SR 1848-1:2018Title : Road signalisation. Road traffic signs and signalisation tools Part 1: Classification,
symbols and locations
Relatedness :National : REV/AMD SR 1848-1:2011
Subsector : T19 Registration Date : 2017-11-13Organization : ASROCountry : Romania
Project ID : 001848-2/0002 Project Established
ICS : 93.080.01National Ref : SR 1848-2:2018Title : Road signalisation. Road traffic signs and signalisation tools Part 2: Technical
requirements
Relatedness :National : REV/AMD SR 1848-2:2011
Subsector : T19 Registration Date : 2017-11-13Organization : ASROCountry : Romania
Project ID : 001848-3/0002 Project Established
ICS : 93.080.01National Ref : SR 1848-3:2018Title : Road signalisation. Road traffic signs and signalisation tools. Part 3: Design and
description
Relatedness :National : REV/AMD SR 1848-3:2011
** End of Subsector **
** End of Sector **
Information procedure Page 43
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector X : UNDETERMINED STANDARDIZATION AREA
Register issued on : 2017-12-01
Page 44
Information procedure Page 45
Monthly Notifications Register
Notifications registered at CCMC from 2017-11-01 to 2017-11-30
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2017-12-01
Page 46Subsector Z99: UNDETERMINED
Subsector : Z99 Registration Date : 2017-11-28Organization : UNICountry : Italy
Project ID : 01603705/0001 Project Established
ICS : 35.020National Ref : UNI1603705Title : Enabling Technologies for Industry 4.0 – Integration and interconnection: main issues
and examplesScope : The Technical Report specifies operational definitions, and provides clarification and
examples to foster a convergent and converging interpretation of integration and interconnectionrequirements.The technical report introduces some definitions, provides some guidance on the main architectures and needs to be analyzed in the implementation of an integrated and connectedsystem,andsomesimplecases.
Relatedness :National : New
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027
F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;
CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR
Top Related