Information procedure - old.isrsm.gov.mk

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2015-10-01 to 2015-10-31

Register issued on : 2015-11-05

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A09: FACILITY MANAGEMENT

Subsector : A09 Registration Date : 2015-10-30Organization : BSICountry : United Kingdom

Project ID : 01502991/0001 Project Established

ICS :National Ref : BS 8536-2Title : Briefing for design and construction. Part 2: Code of practice for Asset

management (Linear and geographical infrastructure)

Relatedness :National : New :

** End of Subsector **

Subsector A11: SAFETY AND SECURITY



ICS :National Ref : BS 8517-1Title : Security dogs. Part 1: Code of practice for the use of general purpose security

dogs




ICS :National Ref : BS 8517-2Title : Security dogs. Part 2: Code of practice for the use of detection dogs


Subsector : A11 Registration Date : 2015-10-23Organization : TSECountry : Turkey

Project ID : ts100391/0001 Project Established

ICS : 03.080.30National Ref :Title : Rules for singboards using in institutions Scope : This standard includes rules specification of singboards used in institutions

Relatedness :

National : New :



ICS : 03.080.20National Ref :Title : Workplaces - Rules for test centers of road vehiclesScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing test centers of road vechicles




ICS : 03.080.30National Ref :Title : Competent services – Microfilm and electronic image processing system – RulesScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of competent services for microfilm and electronic image processing system.



Project ID : tst04182/0001 Project Established

ICS : 03.080.30National Ref :Title : Competent services – Air breathing systems and equipments – RulesScope : This standard includes rules for management, structural features, technical equipment,

personnel specifications and certification of competent services for air breathing systems and equipments.




ICS : 03.080.30National Ref :Title : Apricot processing and packaging places general rulesScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing apricot processing and packaging places




ICS : 03.080.30National Ref :Title : Large size wholesale markets for fruit and vegetabels, meat and chicken fisheries, dry

food-General rulesScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing large size wholesale markets




ICS : 03.080.30National Ref :Title : Authorized markets for automotive spare parts - General rulesScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing authorized markets for automotive spare parts




ICS : 03.080.30, 13.040.50National Ref :Title : Work places – For stationary exhaust emission measuring stations rules Scope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing stationary stationary exhaust emission measuring stations




ICS : 03.080.30National Ref :Title : Work places -Providing alarm monitoring services - General rules Scope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing alarm monitoring services




ICS : 03.080.30National Ref :Title : Work place - Raffination and Regeneration facilities for waste oil - General rules Scope : This standard covers in the minimum characteristics, healthy, safety and environmental

principles for waste oil regeneration facilities which is operated under continuous process, and produced qualified base oil.




ICS : 03.080.30National Ref :Title : Workplaces – Rules for medical waste sterilization facilities Scope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing medical waste sterilization facilities




ICS : 03.080.10National Ref :Title : Work places - Rules for mobile outlets on highwaysScope : This standard includes rules for structural characteristics, operating, personal and technical

equipment providing mobile outlets on highways



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR NF X50-116Title : Project management - Project based management - Presentation and implementation

recommendations

Relatedness :National : REV/AMD FD X50-116:200312 (X50-116) :

Subsector : A99 Registration Date : 2015-10-26Organization : AFNORCountry : France


ICS :National Ref : NF X50-900Title : Management systems integrating an ISO 9001:2008 quality management system -

Requirements for life science technology platforms


Subsector : A99 Registration Date : 2015-10-15Organization : IPQ Draft Issue Date : 2015-10-14Country : Portugal Latest Date for Comments : 2015-11-13

Project ID : 18615154/0001 Draft for public enquiry

ICS : 03.120.10National Ref : prNP 4543Title : Social care services management system. RequirementsScope : This Standard specifies the requirements for establishing, implementing, maintaining and

continuously improve one Social care services management system within the context of the organization. The requirements defined in this standard are generic and can be applicable to all organizations, regardless of type, size or nature.


Subsector : A99 Registration Date : 2015-10-28Organization : UNI

Country : Italy

Project ID : 8300A270/0001 Project Established

ICS : 03.060National Ref : U8300A270Title : Personal financial planning - Guideline for the application of UNI ISO 22222:2008 -

Terminology, classification and requirements of serviceScope : This standard specifies terminology, classification and requirements of personal financial

planning, adapting ISO 22222 to the Italian cultural situation and current legislation about the offering of proper solutions of life insurance and insurance against damages.

Relatedness :National : REV/AMD UNI/TS 11348:2010 :



ICS : 03.080.20National Ref :Title : Work places – Service provides for constructional cabling - General rulesScope : This standard includes the general rules of structural, technical equipment, management and

personnel characteristics of work places giving constructural cabling services.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2015-10-21Organization : ASICountry : Austria


ICS : 13.220.01, 13.320National Ref : ÖNORM F 3003Title : Fire alarm operation control systemsScope : This ÖNORM specifies requirements for fire alarm operation control systems for more

comfortable view of the condition and operation of control and indicating equipment in accordance with ÖNORM EN 54-2 and fire incident control systems actuated by fire detection and fire alarm systems in accordance with ÖNORM F 3001 used in fire alarm systems in accordance with ÖNORM F 3000.


Subsector : B01 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS :National Ref : 03100988Title : Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal

pressure PN 16




ICS :National Ref : 03101009Title : Delivery valve installation - Part 1: Wall hydrants with semi-rigid hose




ICS :National Ref : 03101011Title : Fire fighting equipment; two-pole connector, 16 A, 42 V, socket, connector socket

Relatedness :

National : New :



ICS :National Ref : 03101012Title : Fire fighting equipment; two-pole connector 16 A, 42 V, plug




ICS :National Ref : 03101022Title : Firefighting equipment - CAN interface for components in emergency vehicles - Part 7:

Generator




ICS :National Ref : 03101026Title : Firefighting equipment - Fire-brigade control panel for fire detection and fire alarm

systems




ICS :National Ref : 03101027Title : Firefighting equipment - Control panel for fire brigade inhouse radio systems



Subsector B02: STRUCTURES



ICS : 91.020National Ref : DIN 18205Title : Brief for building design


Subsector : B02 Registration Date : 2015-10-30Organization : BSI Draft Issue Date : 2015-10-01Country : United Kingdom Latest Date for Comments : 2015-10-31


ICS :National Ref : PD 6688-1-4Title : PD 6688-1-4. Background information to the National Annex to BS EN 1991-1-4 and

additional guidance



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2015-10-30Organization : BSICountry : United Kingdom


ICS :National Ref : BS 1881-211Title : Testing Concrete. Part 211: Procedure and terminology for the petrographic

examination of hardened concrete


Subsector : B03 Registration Date : 2015-10-08Organization : LSTCountry : Lithuania


ICS : 91.100.10National Ref :Title : Concrete. Test methods - Part 15: Determination of wear resistanceScope : This Lithuanian standard applies to the determination of wear resistance, of all species of

concrete which are used in roadway, street and airport surfacing, floors, stair treads and landings and other similar structures.


Subsector : B03 Registration Date : 2015-10-16Organization : AENORCountry : Spain Latest Date for Comments : 2015-11-25

Project ID : P0035317/0002 Draft for public enquiry

ICS :National Ref : PNE 83160-1 INTitle : Determination of concrete strength at early-ages, Part 1: Applicable methods.Scope : This report describes the existing procedures to predict the concrete strength at early ages

as well as its evolution.


Subsector : B03 Registration Date : 2015-10-16Organization : AENORCountry : Spain Latest Date for Comments : 2015-11-25


ICS :National Ref : PNE 83517Title : Concrete with fibers. Recommendations for determining the fiber content in the concreteScope : This standard gives some general recommendations for the determination of the fiber

content in the concrete and the homogeneity of distribution of fibers in the concrete matrix. These parameters are directly related to the final mechanical properties of concrete. Recommendations are valid to concrete with macro synthetic fibers and metal fibers of at least 30 mm in length.


Subsector : B03 Registration Date : 2015-10-23Organization : TSECountry : Turkey

Project ID : ts1475-2/0001 Project Established

ICS :91.060.10, 91.100.10, 91.180

National Ref :Title : Plasterbaoard applications - Part 2:Lining wall wall application rulesScope : This standard, specifies application rules for plasterboards lining walls used interior.

Relatedness :National : NewEuropean : Not Equivalent to DIN 18180:2007

Subsector : B03 Registration Date : 2015-10-23

Organization : TSECountry : Turkey


ICS :91.060.10, 91.100.10, 91.180


Relatedness :National : NewEuropean : Not Equivalent to DIN 18182-1:2007



ICS :91.060.10, 91.100.10, 91.180





ICS :91.060.10, 91.100.10, 91.180

National Ref :Title : Plasterbaoard applications - Part 3:Suspended ceiling application rules Scope : This standard, specifies application rules for plasterboards suspended ceiling used interior.




ICS :91.060.10, 91.100.10, 91.180

National Ref :Title : Plasterbaoard applications - Part 3:Suspended ceiling application rules Scope : This standard, specifies application rules for plasterboards suspended ceiling used interior.

Relatedness :

National : NewEuropean : Not Equivalent to DIN 18182-2:2010



ICS :91.060.10, 91.100.10, 91.180

National Ref :Title : Plasterbaoard applications - Finishing works application rulesScope : This standard, specifies systems defined in TS 1475-1, TS 1475-2 and TS 1475-3




ICS :91.060.10, 91.100.10, 91.180





ICS :91.060.10, 91.100.10, 91.180




Subsector B06: GYPSUM

Subsector : B06 Registration Date : 2015-10-21Organization : ASICountry : AustriaProject ID : 00026614/0001 Project

EstablishedICS : 91.100.10National Ref : ÖNORM B 3410Title : Plasterboards for dry construction systems (gypsum plasterboards) - Types,

requirements and testsScope : This ÖNORM applies together with ÖNORM EN 520 for gypsum board. It shall apply mutatis

mutandis to factory machined plate types, such as cut-perforated plasterboard and plasterboard.



Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2015-10-26Organization : AFNORCountry : France


ICS :National Ref : PR NF DTU 34.5 P2Title : Building work - Power operated pedestrian doorsets works - Part 2 : Contract bill of

special administrative model clauses




ICS :National Ref : PR NF DTU 34.5 P1-2Title : Building works - Power operated pedestrian doorsets works - Part 1-2 : General criteria

for selection of materials




ICS :National Ref : PR NF DTU 34.5 P1-1Title : Building works - Power operated pedestrian doorsets works - Part 1-1 : Contract bill of

technical model clauses


Subsector : B08 Registration Date : 2015-10-30Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8214Title : Code of practice for fire door assemblies


Subsector : B08 Registration Date : 2015-10-26Organization : PKNCountry : Poland


ICS : 91.060.50National Ref : prPN-B-06079Title : Doors -- Resistance to shocks -- Requrements and test methodScope : This standard applies to external or internal hinged/pivoted doorsets of any material, as well

as to door leaves and door frames intended to selling on the market as separate products.This standard specifies requirements and test method for assessment of resistance to shocks, where a test specimen is subjected to repeated cycles of shocks. This standard does not apply to doorsets with door closing devices.



Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2015-10-28Organization : UNICountry : Italy

Project ID : 0201F290/0001 Project Established

ICS : 03.100.30National Ref : E0201F290Title : Exterior Insulation and Finishing System (EIFS) - Professionals performing installation of

Exterior Insulation and Finishing System (EIFS) - Knowledge, skill and competence requirements

Scope : The standard defines the knowledge, competence, formation and valuation requirements for qualification of operators for Exterior Insulation and Finishing System installers.



Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2015-10-26Organization : AFNOR

Country : France


ICS :National Ref : PR NF B52-001-2/A2Title : Regulations governing the use of timber in structure - Visual classification for the use of

french softwood and hardwood species in structures - Part 2: Alternative method for massif wood used for manufacturing glued laminated timber BLC and glued solid timber BMR




ICS :National Ref : PR NF B52-001-1/A3Title : Regulations governing the use of timber in structure - Visual classification for the use of

french softwood and harwood species in structure - Part 1: Massive wood


Subsector : B10 Registration Date : 2015-10-15Organization : IPQ Draft Issue Date : 2015-10-14Country : Portugal Latest Date for Comments : 2015-11-13


ICS : 79.040National Ref : prNP 4544Title : Structural sugi sawn timber. Visual strength gradingScope : This standard is intended for visual grading of sawn timber of cryptomeria (Cryptomeria

japonica (L.f.) d. Don) from the Autonomous Region of the Azores, for structural purposes. Therefore this standard defines the visual grading classes and respective mechanical characteristic values. This standard has been prepared according to the requirements of the European Standard EN 14081-1:2005+A1:2011 relating to CE marking of solid timber with rectangular cross-section for structural purposes



Subsector B12: MASONRY



ICS :

National Ref : PR NF DTU 20.13 P3/A1Title : Building works - Small masonry partition walls - Part 3 : Memento



Subsector B14: GEOTECHNICS



ICS :National Ref : PR NF DTU 14.1 P2Title : Building work - Private markets - Tanking works - Part 2 : Contract bill of special

administrative model clauses




ICS :National Ref : PR NF DTU 14.1 P1-2Title : Building works - Tanking works - Part 1-2 : General criteria for selection of materials




ICS :National Ref : PR NF DTU 14.1 P1-1Title : Building works - Tanking works - Part 1-1 : Contract bill of technical model clauses



Subsector B27: WATERPROOFING MATERIALS



ICS :National Ref : Pr NF P95-101Title : Engineering structures ¿ Repair and strengthening of concrete and masonry

constructions - Consolidation of the deteriorated concrete skin ¿ Specification pertaining to the technique and the materials used




ICS :National Ref : PR NF DTU 40.21 P1-2/A1Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1-2 : General

criteria for selection of materials




ICS :National Ref : PR NF DTU 40.21 P1-1/A1Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1-1 : Contract

bill of technical model clauses



Subsector B30: FLOOR AND SURFACING



ICS :National Ref : PR NF P 11-101Title : Exploitation for industrial floors ? Method of measuring rolling wear resistance



Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2015-10-28Organization : UNICountry : Italy


ICS : 03.100.30National Ref : E0206F300Title : Non-regulated professions - Professionals performing installation and maintenance of

BACS systems - Knowledge, skill and competence requirementsScope : The standard defines the knowledge, competence, formation and valuation requirements for

qualification of BACS installers.



Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS

Subsector : B34 Registration Date : 2015-10-28Organization : SNV Draft Issue Date : 2015-10-19Country : Switzerland Latest Date for Comments : 2016-01-15

Project ID : CH150019/0001 Draft for public enquiry

ICS : 91.040.01National Ref : prSIA 112/1Title : Sustainability in building construction

Relatedness :National : REV/AMD SIA 112/1:2004 :


Subsector B99: UNDETERMINED



ICS : 13.100, 91.010.01National Ref : ÖNORM B 2107-1Title : Contractual design of the coordination of civil works - Part 1: Functions and obligations in

the coordination of construction worksScope : This Austrian Standard regulates the functions and obligations supporting the coordination

of construction works. The procedure for drawing up safety and health plans and documents for subsequent work is regulated in ÖNORM B 2107-2.




ICS : 13.100, 91.010.01National Ref : ÖNORM B 2107-2Title : Coordination of construction works for the safety and health of persons - Part 2:

Procedure for the preparation of safety and health care plans and of documents for subsequent work

Scope : This Austrian Standards regulates the creation of user-friendly safety and health plans (SiGe) plans and documents for subsequent work. The functions and responsibilities the implementation of coordination of construction works are regulated in ÖNORM B 2107-1.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR XP V03-147Title : Foodstuffs - Determination of mycotoxines - Guide of use of immunoenzymatiques kits

microplate format (kits ELISA)




ICS :National Ref : PR NF U47-900Title : Breedings - Breedings disinfection after an infectious episode - Good practices and

controls




ICS :National Ref : PR XP T60-750Title : Pre-standard test method - Animal and vegetable fats and oils - Determination of

omega-3 and omega-6 fatty acid content


Subsector : C01 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 67.140.20National Ref : DIN 10764-3Title : Testing of coffee and coffee products - Determination of dry matter content of soluble

coffee - Part 3: Sea sand method for liquid coffee extracts


Subsector : C01 Registration Date : 2015-10-23Organization : TSECountry : Turkey

Project ID : t1002970/0001 Project Established

ICS : 67.180.20National Ref :Title : Edible StarchScope : This standard covers edible starch. It doesn't cover modified starch and starch for industry

other than food sector.




ICS : 67.080.10National Ref :Title : MarmaladesScope : This standard specifies marmelades.




ICS : 67.080.20National Ref :Title : Pepper PickleScope : This standard applies to pepper pickle.




ICS : 67.080.20National Ref :Title : Mixed PickleScope : This standard specifies mixed pickle.




ICS : 67.080.20National Ref :Title : Cucumber PickleScope : This standard applies to cucumber pickle.




ICS : 67.060National Ref :Title : Baby BiscuitsScope : This standard covers baby biscuits




ICS : 67.180.10National Ref :Title : Edible StarchScope : This standard covers edible starch. It doesn't cover modified starch and starch for industry

other than food sector.




ICS : 67.220.10National Ref :Title : MayonnaiseScope : This standard covers mayonnaise. It does not cover the salad saures and salads which is

prepared with mayonnaise.

Relatedness :National : New

:



ICS : 67.060National Ref :Title : Dough Leaves For Börek ProductionScope : This standard applies to dough leaves for börek production.It does not apply to dough

leaves which is used as bread.




ICS : 67.060National Ref :Title : TortillaScope : This standart contains tortilla. It doesn't contains tortilla that is selled non-packaged at

produced place.




ICS : 67.060National Ref :Title : Tel Kadayif (Special Turkish Dessert)Scope : This standard applies to tel kadayıf which is produced with flour It does not apply to dough

products like ekmek kadayıfı and other kadayıf products.




ICS : 03.100.30National Ref :Title : Work places-For human resources servis-Rules

Scope : This standard includes rules for physical structure, management rules and personnel characteristics of Work places-For human resources servis-Rules



Subsector C02: PAINTS AND RELATED PRODUCTS



ICS :National Ref : PR NF T 30-074Title : Paints and varnishes - Paints in solvant phase - Determination ofthebinder and extender

contents




ICS :National Ref : PR NF T 30-094Title : Paints and varnishes - Waterborne paints - Determination ofthe binder and extender

contents




ICS :National Ref : PR NF T 36-005Title : Paints and varnishes - Characterization of coating materials




ICS :National Ref : PR NF T 30-901Title : Paints and varnishes - Paint for nuclear industry - Performance test for susceptibility to

contamination and fitness to decontamination




ICS :National Ref : PR NF T 30-085Title : Paints and varnishes - Determination of the dry extract and ofthe dry coating density -

determination of the dry coating volumic ratio




ICS :National Ref : PR NF T30-049Title : Peintures et vernis - Revêtements à usage extérieur - Essai de vieillissement artificiel




ICS : 87.040National Ref : DIN 55655-3Title : Paints and varnishes - Electro-deposition paints - Part 3: Compatibility of electro-

deposition paints with a reference oil




ICS :National Ref : 00200911

Title : Paints, varnishes and their raw materials - Analysis by near infrared spectrometry - General working principles



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2015-10-15Organization : ISSCountry : Serbia Latest Date for Comments : 2015-12-14


ICS :National Ref : SRPS H.B8.702Title : Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-

Purity Ethylene by Gas ChromatographyScope : This test method covers the determination of carbon dioxide, methane, ethane, acetylene,

and other hydrocarbons in high-purity ethylene. Hydrogen, nitrogen, oxygen, and carbon monoxide are determined in accordance with Test Method D2504. The percent ethylene is obtained by subtracting the sum of the percentages of the hydrocarbon and nonhydrocarbon impurities from 100. The method is applicable over the range of impurities from 1 to 500 parts per million volume (ppmV).



Subsector C06: ESSENTIAL OILS



ICS :National Ref : 00200913Title : Binders for paints and varnishes - Dehydrated castor oil - Requirements and methods of

test



Subsector C13: FERTILIZERS



ICS :National Ref : PR NF U44-051/A2

Title : Organic soil improvers ¿ Designations, specifications and marking



Subsector C18: ADHESIVES



ICS :National Ref : PR NF T76-011Title : Adhesifs - Classification of principal adhesifs



Subsector C21: COSMETICS

Subsector : C21 Registration Date : 2015-10-16Organization : UNMZ Draft Issue Date : 2015-11-30Country : Czech Republic Latest Date for Comments : 2016-03-31


ICS :National Ref :Title : Cosmetics-Packaging-Part 1: Requirements on plastic packaging of cosmetec productsScope : This standard specifies requirements on plastic packaging coming into contact with a

cosmetic product with regard to the interaction of the packaging material and the cosmetic product.


Subsector : C21 Registration Date : 2015-10-16Organization : AENORCountry : Spain Latest Date for Comments : 2015-11-25


ICS :National Ref : PNE 84777Title : Cosmetic raw materials. Plants Extracts. Hydroglycolic extract mallow (Malva sylvestris

L.)Scope : This standard includes the specifications required by the Hydroglycolic extract mallow in

cosmetic uses.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F01: TECHNICAL DRAWINGS

Subsector : F01 Registration Date : 2015-10-26Organization : AFNORCountry : France


ICS :National Ref : PR NF P03-001Title : Private contracts - Typical specifications - Contract procedure for building works, private

contracts


Subsector : F01 Registration Date : 2015-10-30Organization : BSICountry : United Kingdom


ICS :National Ref : BS 6465-2Title : Sanitary installations. Part 2 - Code of practice for space requirements for

sanitary appliances



Subsector F04: SIEVES

Subsector : F04 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 19.120National Ref : DIN 66118Title : Particle size analysis - Size analysis by air classification - Fundamentals




ICS : 19.120National Ref : DIN 66119Title : Particle size analysis - Size analysis by air classification with gravitation-counterflow

elutriator

Relatedness :

National : New :



ICS : 19.120National Ref : DIN 66120Title : Particle size analysis - Size analysis by air classification with centrifugal counterflow

classifier



Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2015-10-14Organization : TSECountry : Turkey


ICS : 17.040.30National Ref :Title : Snap GaugesScope : This standard covers snap gauges.



Subsector F12: INFORMATION PROCESSING SYSTEMS



ICS :National Ref : PR XP S74-303Title : Test procedure for damping perforating and not perforating shocks applied to thorax,

arm, forearm, leg, thigh protective equipment




ICS : 35.040National Ref : DIN 16587Title : Information technology - Automatic identification and data capture techniques - Data

Matrix Rectangular Extension




ICS :National Ref : 04300783Title : Information technology - Software document evaluation - Quality characteristics



Subsector F99: UNDETERMINED



ICS :National Ref : PR NF X50-275Title : Exchanges of data on intellectual property titles


Subsector : F99 Registration Date : 2015-10-23Organization : LSTCountry : Lithuania


ICS :National Ref :Title : Technical maintenance and repair of road vehicles and trailersScope : This standard specifies reguirements for technical maintenance and repair services of road

vehicles and trailers.



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR NF S52-204Title : Leisure accommodation vehicles ¿ Caravan holiday homes ¿ Requirements for low-

voltage electrical installations


Subsector : H04 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR NF S54-217Title : General requirements for control playgrounds and sports facilities for public use and skills

associated inspectors


Subsector : H04 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 97.220.20National Ref : DIN 11088Title : Alpine ski bindings - Selection of torque values with the tibia-width method


Subsector : H04 Registration Date : 2015-10-15Organization : IPQ Draft Issue Date : 2015-07-15Country : Portugal Latest Date for Comments : 2015-08-14


ICS : 97.220.10National Ref : prNP 4542Title : Swimming pools. Quality requirements and treatment of the water used in the poolsScope : This standard is intended to establish the characteristics to be complied with the water used

in swimming pools for public use to ensure that their physicochemical and microbiological composition is compatible with the intended uses, without endangering human health


:


Subsector H05: OIL AND GAS BURNERS

Subsector : H05 Registration Date : 2015-10-23Organization : TSECountry : Turkey


ICS : 75.160.20, 95.020National Ref :Title : Military fuels - Naval distillate fuels (F-76) - Guide specification (minimum quality

standards) Scope : This standard covers the F-76 naval diesel fuel with anti-icing additive to be used for military

naval.



Subsector H18: CENTRAL HEATING BOILERS

Subsector : H18 Registration Date : 2015-10-12Organization : NBNCountry : Belgium

Project ID : BE063251/0001 Project Established

ICS : 91.060.40National Ref : prNBN B 61-001, ed 2Title : Heating boilers with a total nominal heat output greater than or equal to 70 kW - General

provisions

Relatedness :National : REV/AMD NBN B 61-001:1986, ed 1 :


Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES

Subsector : H19 Registration Date : 2015-10-28Organization : UNICountry : Italy


ICS : 03.100National Ref : E0206F320Title : Non-regulated professions - Professionals performing installation, maintenance and

sweeping of heating appliances fired by wood or other solid biofuels included products of combustion flue system - Knowledge, skill and competence requirements

Scope : The standard defines qualification requirements for professionals acting on heating appliances fired by wood or other solid biofuels included products of combustion flue system. It adresses the installation, maintenance and sweeping activities.


:


** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS :National Ref : 06702173Title : Bolts and screws with external hexalobular driving feature with small flange




ICS :National Ref : 06702174Title : Hexalobular socket set screws




ICS :National Ref : 06702244Title : Cup head square neck bolts




ICS :National Ref : 06702245Title : Flat countersunk head nib bolts


Subsector : I02 Registration Date : 2015-10-14Organization : TSE

Country : Turkey


ICS : 21.040.10National Ref :Title : Metric taper external and mating parallel internal, Threads - Basic sizes, limit deviations

and limits of sizeScope : Specifies the geometrical tests for these woodworking planing machines, and gives the

corresponding permissible deviation which apply to machines for general purpose use and normal accuracy. Gives also the terminology appropriate to each part of the machine (in english and french as well as the equivalent terms in german, spanish, italian and...


Subsector : I02 Registration Date : 2015-10-14Organization : TSECountry : Turkey


ICS : 21.040.10National Ref :Title : Fasteners-Wire Thread Inserts For ISO Metric Screw ThreadScope : This standard covers ISO metric wire thread inserts with basic profile according to TS 61-20,

bolt thread according to TS 61-15 and tolerance grade 6 H.



Project ID : tst79-20/0001 Project Established

ICS : 21.060.30National Ref :Title : Washers-Part 20:Plain washersScope : This standard specifies defination, classification requirements, sampling, testing and

packaging for plain washers



Subsector I04: ROLLING BEARINGS



ICS :National Ref : 11800483

Title : Linear motion rolling bearings - Flat cage rail guide - Dimensions and tolerances



Subsector I06: PRESSURE VESSELS



ICS : 23.020.10, 23.020.30National Ref :Title : Tanks-Vertical, Steel, For Use In Chemical Process (From 0,063 m³ to 25³

Capacity)Construction Design Requirements Scope : This standard covers the constructional requirements For the Tanks made of steel and

mounted in vertical position and used in chemical processes.



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2015-10-28Organization : UNICountry : Italy

Project ID : 0323B460/0001 Project Established

ICS : 65.060.80National Ref : E0323B460Title : Forestry machinery - Safety - Flail MowersScope : This standard specifies the safety requirements and their verification for the design and

construction of flail mowers for use in forestry only, that are mounted or semi-mounted to self-propelled. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.



Subsector I09: SMALL TOOLS



ICS : 25.100.30

National Ref :Title : Twist Drills-Alloyed Cold Work Tool Steel Or Hrd Metal Brazing TipsScope : This standard covers parallel shank twist drills




ICS : 79.120.20National Ref :Title : Woodworking Chisels and GougesScope : This standard covers woodworking chisels and gauges

Relatedness :National : NewInternational : Modified ISO 2729:1995



ICS : 25.100.30National Ref :Title : Parallel Shank Twist Drills For Use In Jig BushesScope : This standard, specifies the dimensions of paralled shank twist drills for use in jig bushes.

Diameter (d) range and overall length (l1) for these drills are 1mm



Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2015-10-26Organization : AFNORCountry : France


ICS :National Ref : PR NF E29-732Title : Gas containers - Cylinders and containers for compressed hydrogen -Test method for

selecting construction materials



Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)

Subsector : I17 Registration Date : 2015-10-21Organization : ASICountry : Austria


ICS : 13.030.40, 71.100.45National Ref : ÖNORM EN 16811-1/ATitle : Winter service equipment - De-icing agents - Part 1: Sodium chloride - Requirements and

test methods (Amendment)Scope : The amendment specifies the salt purity to sodium chloride in Austria.




ICS : 67.260National Ref : DIN 9802Title : Food processing machinery - Bore of cylinder head for mincers - System Unger




ICS : 67.260National Ref : DIN 9803Title : Food processing machinery - Knifes for mincers - System Unger




ICS : 67.260National Ref : DIN 9805Title : Food processing machinery - Precutter and holeplates for mincers - System Unger


Subsector : I17 Registration Date : 2015-10-13Organization : DIN

Country : Germany


ICS : 67.260National Ref : DIN 9809Title : Food processing machinery - Distance and supporting rings for mincers - System Unger




ICS :National Ref : 06003603Title : Food processing machinery - Knife stud for mincers - System Unger, sizes R70 to X400



Subsector I18: MINING



ICS :National Ref : 00802342Title : Pipes for use in freezing shaft sinking; dimensions and technical delivery conditions


Subsector : I18 Registration Date : 2015-10-02Organization : PKNCountry : Poland


ICS : 01.080.30, 73.020National Ref : prPN-G-09008Title : Mine maps – Conventional marks for underground transportation devices, face machines

and energy devicesScope : The conventional marks of vertical transport devices, carriage, haulage, mining face

machines, energy and tele-technical devices used in the mine maps were described



Subsector I19: NUCLEAR ENERGY



ICS : 13.280, 91.040.01National Ref : ÖNORM S 5280-2Title : Radon - Part 2: Technical preventive measures for buildingsScope : This ÖNORM describes functional and already tested conceptual, constructive and technical

measures for radon precaution. It is applicable during planning and construction of new buildings foreseen for living, working and residence purposes (e.g. dwellings, schools, kindergardens, workplaces) as well as at annexes and renovations.




ICS : 11.040.50National Ref : ÖNORM S 5240-10Title : Image quality assurance in diagnostic X- Ray departments - Part 10: Acceptance testing

of medical radiographic equipment for image recording and radioscopy including digital subtraction angiography (DSA) and volumic tomography

Scope : (Partially) Acceptance testing of medical radiographic equipment for direct and indirect image recording, digital subtraction angiography and volumic tomography




ICS : 11.020, 13.100, 13.280National Ref : ÖNORM S 5227Title : Radiation protection tests for handling of sealed radioactive sourcesScope : This ÖNORM describes rules for radiation protection tests for handling of sealed radioactive

sources and aims to standardize the tests. The ÖNORM shall apply at initial type and repeating testing at arrangements according §§ 6 and/or 7 as well as § 10 of radiation protection law. Radiation protection tests are for evaluating the compliance with requirements of the law.



Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 Registration Date : 2015-10-08Organization : NENCountry : Netherlands


ICS : 23.040.01National Ref : NTA 8036:2015 Concept nlTitle : Requirements for the joint location of pipelinesystems and other infrastructure in a

pipeline corridor Scope : In the Netherlands corridors are indicated by the Government for the installation of

pipelines and other infrastructure. In this technical agreement specifications are given for the pipeline systems, the corridors and the other infrastructure.



Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2015-10-26Organization : AFNORCountry : France


ICS :National Ref : PR NF E68-001Title : Equipment for the manufacture of products made of composite materials - Terminology




ICS : 29.220.20, 95.020National Ref :Title : Lead-Acid batteries-Maintenance free, sealed, lead-Acid batteries for military usesScope : This standard covers the lead-acid batteries, maintenance free, sealed for military uses.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M16: MECHANICAL TESTS FOR METALS

Subsector : M16 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 19.060National Ref : DIN 50100Title : Load controlled fatigue testing - Execution and evaluation of cyclic tests at constant load

amplitudes on metallic specimens and components


Subsector : M16 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 19.060National Ref : DIN 51200Title : Materials testing machines - Design and application of holding devices for test pieces in

hardness testing machines



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2015-10-14Organization : TSECountry : Turkey


ICS : 85.080National Ref :Title : Paper TowelsScope : This standard specifies type and characteristics sampling and test and marking of the paper

towels made of tissue paper.




ICS : 85.080National Ref :Title : Paper Table NapkinsScope : This standard covers table napkins made of paper. It doesn't cover facial tissues used for

other purposes and napkins made of fabric.

Relatedness :National : NewInternational : Modified ASTM D 4560:1992





Relatedness :National : NewInternational : Modified SABS 792:1970





Relatedness :National : NewInternational : Modified SI 834:1972


Subsector N02: SOLID FUELS

Subsector : N02 Registration Date : 2015-10-16Organization : ISSCountry : Serbia Latest Date for Comments : 2015-12-14


ICS :National Ref : naSRPS B.H8.392:2015Title : Standard Test Method for Moisture in the Analysis Sample of Coal and CokeScope : This test method covers the determination of moisture in the analysis sample of coal or

coke. It is used for calculating other analytical results to a dry basis.


Subsector : N02 Registration Date : 2015-10-28Organization : UNICountry : Italy


ICS : 01.040.75National Ref : E0209F260Title : Solid biofuels - By-products from grapes processing for energy use - Classification and

specificationsScope : This standard defines classification and specifications for by-products from grapes

processing for energy use.



Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2015-10-15Organization : ISSCountry : Serbia Latest Date for Comments : 2015-12-14


ICS :National Ref : SRPS H.B8.700Title : Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon

Products by Gas ChromatographyScope : This test method covers the determination of hydrogen, nitrogen, oxygen, and carbon

monoxide in the parts per million volume (ppmV) range in C2 and lighter hydrocarbon products. This test method should be applicable to light hydrocarbons other than ethylene, but the test program did not include them.


Subsector : N03 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR NF M07-203Title : Petroleum products - Determination of the total hydrocarbon index in aqueous effluents

by Infra-Red spectrometry - Petroleum refineries. Industries, warehouses and transportation of petroleum products


Subsector : N03 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS : 75.100National Ref : DIN 51808Title : Testing of lubricants - Determination of oxidation stability of greases - Oxygen method




ICS :National Ref : 06234869Title : Testing of mineral oils - Determination of sulfated ash



Subsector N09: PLASTICS



ICS : 91.100.50National Ref :

Title : Termoplastic waterstops for sealing joints in concrete - Part 1: Terms and definitions, shapes, dimensions, marking

Scope : This document applies to joint tapes made of thermoplastics that are completely or partially concreted

Relatedness :National : NewEuropean : Modified DIN 18541-1:2014



ICS : 91.100.50National Ref :Title : Termoplastic waterstops for sealing joints in concrete - Part 2: Material requirements,

testing and inspectionScope : This document applies to joint tapes made of thermoplastics tst 3078-1, which are wholly or

partially concreted. This document specifies requirements for materials and for their inspection and surveillance

Relatedness :National : NewEuropean : Modified DIN 18541-2:2014-11


Subsector N11: WOOD-BASED PANELS



ICS : 79.060.10National Ref : DIN 52376Title : Testing of plywood - Determination of compression strength parallel to the surfaces




ICS : 79.060.10National Ref : DIN 52377Title : Testing of plywood - Determination of modulus of elasticity in tension and of tensile

strength


Subsector : N11 Registration Date : 2015-10-13

Organization : DINCountry : Germany


ICS : 79.080National Ref : DIN 68740-2Title : Panels - Part 2: Veneer outer layers on wood-based panels




ICS : 01.040.79National Ref : DIN 68740-1Title : Panels - Part 1: Terms and definitions, designations




ICS : 79.060.10National Ref : DIN 68791Title : Large area shuttering panels of core plywood for concrete and reinforced concrete




ICS : 79.060.10National Ref : DIN 68792Title : Large area shuttering panels of veneer plywood for concrete and reinforced concrete



Subsector N99: UNDETERMINED

Subsector : N99 Registration Date : 2015-10-28Organization : UNI

Country : Italy


ICS : 67.200.10National Ref : E0209F270Title : Liquid biofuels - Animal and vegetable oils and fats and their intermediates and derivates

used as fuels for energy production - Specifications and classification for energy useScope : The standard defines classificazion and specifications of animal and vegetable oils and fats

and their main intermediates and derivates used as fuels for energy production. Intermediates (Glycerine) of Fatty Acids Methyl Ester (FAME) are within the scope of this standard. Fatty Acids Methyl Ester (FAME) is out of the scope of this standard. Classification and specifications here defined are addressed only to animal and vegetable oils and fats and their intermediate and derivates used as fuels for thermal and electric energy production. No other use has been taken into account (e.g automotive).



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2015-10-30Organization : BSICountry : United Kingdom


ICS :National Ref : BS 6068-2.29:1987 CorrigendumTitle : Water quality. Physical, chemical and biochemical methods. Determination of

cobalt, nickel, copper, zinc, cadmium and lead: flameatomic absorption spectrometric methods. Corrigendum



Subsector S13: ERGONOMICS

Subsector : S13 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : PR NF X35-102Title : Ergonomic design of work spaces in offices



Subsector S17: RESPIRATORY PROTECTIVE DEVICES

Subsector : S17 Registration Date : 2015-10-30Organization : BSI Draft Issue Date : 2015-10-22Country : United Kingdom Latest Date for Comments : 2015-12-22


ICS :National Ref : BS 8547Title : BS 8547. Respiratory equipment. Breathing gas demand regulator used for diving

to depths greater than 50 metres. Requirements and test methods



Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS

Subsector : S19 Registration Date : 2015-10-13Organization : DINCountry : GermanyProject ID : 06301739/0001 Project

EstablishedICS :National Ref : 06301739Title : Adhesives for first aid - Dimensions



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2015-10-21Organization : ASICountry : Austria


ICS : 13.030.99National Ref : ÖNORM S 2088-1Title : Contaminated sites - Risk assessment concerning the pollution of groundwater which is

to be safeguardedScope : This ÖNORM applies for the evaluation of contaminated sites with a view to the risk to

groundwater. The purpose of this ÖNORM is to define the basis for the assessment of test results on contaminated sites and the resulting estimate of the risk to groundwater. The aim of the assessment of contaminated sites is to determine the need for action (De-contamination, securing, monitoring, use restriction).




ICS : 13.030.40, 83.140.99National Ref : ÖNORM S 2073Title : Landfills - Polymer membrane liners - Requirements and testsScope : On the basis of ÖNORM EN 13493 and taking into account the specific geological conditions

at a national level, this ÖNORM defines requirements for the characteristics of thermoplastic liners used for sealing landfill structures and having a minimum useful life of more than 50 years. It is also applicable to the proper installation, conditions for installation and the protection of polymer membrane liners used for sealing landfills.




ICS : 13.030.40, 59.080.70National Ref : ÖNORM S 2076

Title : Landfills - Sealing systems with flexible plastics liners - System requirements and conditions for installation for geotextile protection layers

Scope : On the basis of ÖNORM EN 13257 and taking into account the specific geological conditions at a national level (in accordance with Table 2), this Austrian Standard (ÖNORM) defines requirements for the characteristics of geotextile protection layers having a minimum useful life of more than 25 years. It is also applicable to the proper installation, conditions for installation and the protection of geotextile protection layers used for sealing landfills.




ICS : 65.020.40, 97.220.10National Ref : ONORM L 1134Title : Golf course care - Development and conservation care taking into account the

environmental needsScope : This Austrian Standard specifies the requirements for the development and conservation

care of golf courses, taking into account the environmental needs.


Subsector : S99 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS :National Ref : 08000276Title : Image quality assurance in diagnostic X-ray departments - Part 159: Acceptance and

constancy testing in teleradiology according to RöV


Subsector : S99 Registration Date : 2015-10-23Organization : TSECountry : Turkey


ICS : 03.100.01, 13.100National Ref :Title : Occupational health and safety management systems for small and medium-sized

enterprises (SMEs) – Requirements Scope : This Occupational Health and Safety Management System Standard specifies requirements

for Occupational Health and Safety Management System of Small and Medium Size Enterprises (SMEs) for requirements. All the requirements in this OHS-MS Standard are intended to be incorporated into any OHS management system.

Relatedness :

National : NewInternational : Not Equivalent to BS OHSAS 18001:2007


** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2015-10-13Organization : DINCountry : Germany


ICS :National Ref : 13202534Title : Inland navigation vessels - Minimum requirements for habitations



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2015-10-05Organization : AFNORCountry : France


ICS :National Ref : 2713-012Title : Aerospace series - Cables, electrical, single and multicore for general purpose -

Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard




ICS :National Ref : PR NF R10-025-4Title : Road vehicles - Measurement of the opacity of exhaust gas from compression ignition

(diesel) engines - Part 4: Monitoring procedures





(diesel) engines - Part 1: Standard (reference) opacimeter





(diesel) engines - Part 2: Technical specifications for partial flow commercial opacimeters





(diesel) engines - Part 3: Monitoring procedure of visible pollutants (opacity of exhaust gas)


Subsector : T02 Registration Date : 2015-10-23Organization : TSECountry : Turkey


ICS : 71.100.30, 95.020National Ref :Title : Propellant, solid - Stability testsScope : This standard covers sampling, examining, and stability tests of solid propellants.




ICS : 71.100.30, 95.020National Ref :Title : Propellant, solid - Physical test methods

Scope : This standard covers sampling, examining, and physical test methods of solid propellants.




ICS : 71.100.30, 95.020National Ref :Title : Propellant, solid - Special test methodsScope : This standard covers sampling, examining, and special test methods of solid propellants.



Subsector T03: ROAD VEHICLES




Gateway





Warning signal unit





Lighting column





Battery charger





Portable pump





Frequency converter




ICS :

National Ref : 03101024Title : Firefighting equipment - CAN interface for components in emergency vehicles - Part 9:

Winch handle





Water cannon




ICS : 43.040.50National Ref :Title : Clutch Linings for Motor VehiclesScope : This standard covers clutch linings for motor vehicles.

Relatedness :National : NewInternational : Modified DIN 73451:2011



ICS : 43.040.50National Ref :Title : Clutch Linings for Motor VehiclesScope : This standard covers clutch linings for motor vehicles.

Relatedness :National : NewInternational : Modified JIS B 4301:2007



ICS : 43.060.50

National Ref :Title : Road Vehicles-Spark Plugs-MetricScope : This standard covers metric spark plugs for road vehicles.




ICS : 43.060.50National Ref :Title : Road Vehicles-Spark Plugs-MetricScope : This standard covers metric spark plugs for road vehicles.

Relatedness :National : NewInternational : Modified ISO 11565:2006/Corr1:2007








Relatedness :National : NewInternational : Modified SAE J 548/1:2013



ICS : 43.060.10

National Ref :Title : Pistons for Reciprocating Internal Combustion EnginesScope : This standard covers pistons for reciprocating internal combustion engines.

Relatedness :National : NewInternational : Modified BS 3356:1990



ICS : 43.060.10National Ref :Title : Pistons for Reciprocating Internal Combustion EnginesScope : This standard covers pistons for reciprocating internal combustion engines.

Relatedness :National : NewInternational : Modified JIS D 3104:1996


Subsector T04: TYRES

Subsector : T04 Registration Date : 2015-10-28Organization : UNICountry : Italy


ICS : 83.160.10National Ref : E0331B430Title : Pneumatic tyres for motorvehicles and their trailers, having a gross vehicle mass up to

3,5 t - Instructions for the correct use and maintenanceScope : This standard provides prescriptions and instructions aimed at assuring performance of the

in service tyres by means of a correct use and of a suitable maintenance, and provides also criteria for their replacement

Relatedness :National : REV/AMD UNI 10587:2003 :



ICS : 83.160.10National Ref : E0331B440Title : Commercial vehicles and trailers tyres - Instructions for the correct use and maintenance.Scope : This standard provides prescriptions and instructions aimed at assuring performance of the

in service tyres by means of a correct use and of a suitable maintenance, and provides also criteria for their replacement.

Relatedness :National : REV/AMD UNI 10588:2005

:



ICS : 83.160.10National Ref : E0331B450Title : Recommendations on storage of tyres, tubes and flapsScope : This standard provides instructions aimed at assuring storage of tyres, tubes and flaps.

Relatedness :National : REV/AMD UNI 11061:2003 :



ICS : 43.040.10National Ref : E0331B470Title : Testing of passenger cars and motorcycles on roller test rigs - Tyres requirementsScope : The standard is intended to alert users of roller test rigs on damages that may result to the

tyres when testing passenger cars and motorcycles.



Subsector T13: LIFTING CHAINS, HOOKS AND ROPES



ICS : 53.020.30National Ref : U36002470Title : Cranes and related accessories - Flat woven webbing slings made of man-made fibres. -

Oneway use slingsScope : This standard specifies requirement about production and safety of flat woven webbing

oneway use slings.



Subsector T14: PACKAGING



ICS :National Ref : PR NF H03-003-2Title : Wooden packaging - Rectangular parallelepipedal packages forfresh fruit and vegetables

transport, tray - Part 2 :Programme of tests on palletized loads




ICS :National Ref : PR NF H13-045Title : Cardboard packaging - Fuide for the drafting of specifications for corrugated cardboard

packagings




ICS :National Ref : PR NF H13-046Title : Closure and opening of corrugated board packagings




ICS :National Ref : PR NF H20-008Title : Wood and composite-material packaging - Deviees for gripping transport packages




ICS :National Ref : prNF H34-011Title : Plastic packaging-Woven bags of a maximum net mass of 75 kg




ICS :National Ref : PR NF H03-003-1Title : Wooden packaging-Rectangular parallelepipedal packages forfresh fruit and vegetables

transport, tray - Part 1 :Specifications and tests on individual package




ICS : 55.180.20National Ref : DIN 15159-1Title : Transportation chain for trade products - Thermoplastic pallets - Part 1: 800 mm x 600

mm x 160 mm, Dimensions and weights



Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2015-10-07Organization : UNMZ Draft Issue Date : 2015-12-15Country : Czech Republic Latest Date for Comments : 2016-02-28


ICS :National Ref :Title : Manipulační jednotky - Zásady pro tvorbu, bezpečnou manipulaci a skladováníScope : Unit loads - Principles of forming and of security in the handling and storaging

Relatedness :National : REV/AMD ČSN 269030(1998) :


Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2015-10-30

Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8586 CorrigendumTitle : Pin code allocation for BR 930 series relays - Specification.

Corrigendum



Subsector T99: UNDETERMINED

Subsector : T99 Registration Date : 2015-10-15Organization : SNV Draft Issue Date : 2015-10-14Country : Switzerland Latest Date for Comments : 2015-11-25

Project ID : CH150018/0001 Draft for public enquiry

ICS : 93.100National Ref : prSN 671560Title : Maintenance of green areas at railway facilities -

vegetation free of coppice, hedges and bushes

Relatedness :National : REV/AMD SN 671560:1999 :


** End of Sector **




Sector Z : INFORMATION TECHNOLOGY


Subsector Z01: RADIOCOMMUNICATION FOR IT

Subsector : Z01 Registration Date : 2015-10-23Organization : TSECountry : Turkey


ICS : 33.060.20, 95.020National Ref :Title : The multi- Chanel tactical digital gate way - System control standardsScope : This standard covers the system control standards of multi-channel tactical digital gateway.



Subsector Z99: UNDETERMINED



ICS : 35.040National Ref :Title : Administrative criteria for penetration testers and organizations conducting penetration

testsScope : This standard includes administrative criteria for penetration testers and organizations

conducting penetration tests.




ICS : 35.080National Ref :Title : Requirements for Cloud Computing Security and ImplementationScope : This standard addresses security problems of cloud computing and covers solutions.



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

Information procedure - old.isrsm.gov.mk

Documents

Transcript of Information procedure - old.isrsm.gov.mk