STOPWATCHES
THELEGENDARY PIONEER IN PRECISIONTIMEKEEPING
P R E C I S I O N
3
Introduction
Pioneer in Precision Timekeeping 5
Precision Mechanics
Selection criteria 6-7
Split-seconds addition timer 8-9
Addition timer 10-13
Addition timerin ABS case 14-15
Crown stopper 16-17
Crown stopperin ABS case 18
Day timer 19
Felix-Amigo-TristopAddition timerin ABS case 20-21
Quality Electronics
Selection criteria 22-23
Memory stopwatches1-button operation 24
Thermal printer 25
Multi-function andmemory stopwatches1-button operation 26-27
Multi-function andmemory stopwatches2-button operation 28-29
Basic function stopwatch2-button operation 30-31
Industry and Laboratorytime measurement
Desktop timers 33-35
Industrial timing 36-38
Short period timers 38-39
Additional devices –Accessories 40
Contents
T I M E K E E P I N G
Q U A L I T Y A N D
Hanhart – today the leading manufac-turer of stopwatches, market leaderfor mechanical stopwatches and spe-cialist in high-precision, functionalinstrument watches for use in the air,on the land and on the sea – has itsroots in the traditional craftsmanshipand art of watchmaking in Switzerlandand southern Germany.
The company was founded in 1882 inDiessenhofen in Switzerland by JohannA. Hanhart. In 1902, the watchmakingbusiness moved to the watchmakingcapital of southern Germany,Schwenningen/Neckar.
It was as early as 1924 that Hanhartlaunched the world’s first affordablemechanical stopwatch. At that time,these timepieces came exclusivelyfrom Switzerland and were only avail-able – if at all – at very high prices,since they were virtually only everproduced as one-off items. The greatsuccess of this stopwatch laid thefoundations for further innovative tech-nical developments, such as the com-plicated split-second stopwatch or anultrafast oscillator with a balancewheel frequency of 360,000 vibrationsper hour, which enabled Hanhart tobecome one of the first manufacturersof watches capable of measuringhundredths of a second.
As the company grew, a second factorywas established in the southern Ger-man town of Gütenbach in 1934.This is still where the entire stopwatchcollection is manufactured today, andsome of the wristwatches.
Then in 1938 a new era began – thefirst Hanhart chronograph model, themono-pusher “Calibre 40”, went intoproduction. This was followed in 1939by the legendary pilot’s chronographs“Calibre 41” and “TachyTele”.
After the Second World War and thedismantling of the production facilitiesby the occupying forces, the hard workof reconstruction began in 1949.By the early 1950s, production wasalready in full swing again.Hanhart began to concentrate increas-ingly on making mechanical stop-watches. In 1962, Hanhart amazed themarket with its low-priced stopwatch“Amigo” – precision mechanics in aplastic case.
With the start of the era of the quartzwatch, Hanhart set up its own plasticsinjection moulding plant and developeda quartz movement which would sub-sequently be sold by the millions.During these years, the range of mech-anical and electronic stopwatches,quartz watches and alarm clocks beingproduced expanded steadily.
With the renaissance of traditionalwatchmaking in the mid-1990s,Hanhart was able to draw on its ownpioneering achievements from thepast: from 1997 onwards, it began tomake faithful reproductions of thelegendary pilot’s chronographs in newand limited editions, using the oldtools and specifications.These replica chronographs have beenenormously popular with collectorsand enthusiasts.
Nowadays high-quality mechanicaltimepieces, painstakingly manufac-tured in numerous individual stages atthe factory in Gütenbach, continue torepresent an important product seg-ment for Hanhart alongside its widerange of stopwatches for industry andsport. Just as they were used in thepast for all important car races,amongst other things, now they arethe essential rallying companion forambitious vintage car drivers.
The design and technology of the wrist-watches in the Pioneer and Primuscollections are also based on Hanhart’svast expertise and long tradition ofmaking chronographs.They combine historic features such asthe red button – Hanhart’s trademarksince 1939 – with the latest technologyand contemporary design.
P R E C I S I O N
A pioneer in precision timekeeping
5
6
Lever design
Pin lever design, 1 or 7 jewels,depending on the model
The pin lever escapement withshock-resistant balance wheel is avery robust and reliable technology.It guarantees superb accuracy thatwill last for decades.
P R E C I S I O N
Swiss lever escapement,7, 9 or 11 jewels, dependingon the model
The lever escapement (2 jewels onthe lever) and the shock-resistantbalance wheel increase the accu-racy and lifespan of these mechan-ical precision stopwatches. We usethe Swiss lever escapement forstopwatches which will run for longperiods and/or for fast-beat move-ments.
7
Quality and precision
The name Hanhart has for decadesbeen synonymous with precisiontimekeeping like no other.
In the field of mechanicalstopwatches, Hanhart is theacknowledged market leader,as demonstrated by its extensiveproduct range, which covers everypossible function.
There is a choice of shock-resistantmovements with high-quality Swisslever escapements or with the sim-pler pin lever technology. The casesare made of metal or ABS plastic,and certain models have extra dustand water protection.
When choosing a stopwatch,the following criteria should beconsidered:• Function• Movement type(lever, pin lever, jewels)
• Case (metal, ABS, dust andwater protection)
• Metal or plastic buttons• Mineral glass or acrylic glass
24 month Hanhart guaranteeMade in Germany
Split-seconds addition timer (hand wound at crown) Page 8For time measurement with interrupt option,drag indicator for split time measurement
Start CrownStop the split time with drag indicator Right buttonReset and zero-setting ofthe drag indicator Right buttonStop CrownZero-setting Left buttonFlyback (Tempo) optional on all models
No. Movement type Quality featuresAccurate Accuracy Accurate Accuracyrunning time 1/5 + 1/100 1/5 + 1/100 running time 1/10 1/10
135 19���pin lever 07 jewels 16-18 hours 0.02 % 8-9 hours 0.03 %
Addition timer (hand wound at crown) Page 10For time measurement with interrupt option
Start CrownStop CrownZero-setting Side buttonFlyback (Tempo) optional on all models
No. Movement type Quality featuresAccurate Accuracy Accurate Accuracyrunning time 1/5 + 1/100 1/5 + 1/100 running time 1/10 1/10
121 19���pin lever 01 jewel 10-12 hours 0.04 % 5-6 hours 0.06 %122 19���pin lever 07 jewels 10-12 hours 0.04 % 5-6 hours 0.06 %126 19��� lever 11 jewels 16-18 hours 0.02 % – –185 19��� lever 07 jewels 16-18 hours 0.02 % 8-9 hours 0.03 %
Crown stopper (hand wound at crown) Page 16Simple time measurement with no interrupt option
Start CrownStop CrownZero-setting Crown
No. Movement type Quality featuresAccurate Accuracy Accurate Accuracyrunning time 1/5 + 1/100 1/5 + 1/100 running time 1/10 1/10
111 19���pin lever 01 jewel 10-12 hours 0.04 % 5-6 hours 0.06 %112 19���pin lever 07 jewels 10-12 hours 0.04 % 5-6 hours 0.06 %115 19���pin lever 07 jewels 10-12 hours 0.03 % 5-6 hours 0.06 %115 19��� lever 07 jewels 10-12 hours 0.03 % 8-9 hours 0.08 %
Addition timer (hand wound at crown) Page 20For time measurement with interrupt option
Start Green buttonStop Red buttonZero-setting White or
black buttonFlyback (Tempo) standard on “Amigo” models (except Allsport)
No. Movement type Quality featuresAccurate Accuracy Accurate Accuracyrunning time 1/5 + 1/100 1/5 + 1/100 running time 1/10 1/10
164 19���pin lever 00 jewels 60 minutes 0.08 % 30 minutes 0.14 %174 19���pin lever 00 jewels 60 minutes 0.08 % 30 minutes 0.14 %141 19���pin lever 00 jewels 10-12 hours 0.06 % 5-6 hours 0.08 %152 19���pin lever 07 jewels – – 8-9 hours 0.08 %
M E C H A N I C S
8
P R E C I S I O N
Split-secondsaddition timer
Addition timer for time measure-ment with interrupt option, withdrag indicator for split timemeasurement.
All models have a diamond-cut,chrome-plated brass case,polished or matt.
All models feature a lever escape-ment with 7 jewels. They are shock-resistant and have additional dustand water protection.
CalibrationSee description on page 40.
135.0101-0SPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 130 g
135.0401-0SPin lever, 7 jewels1/10 sec. 15 min.
Case � 55 mm, weight 130 g
135.0201-0SIndustry modelPin lever, 7 jewels1/100 min. 30 min.
Case � 55 mm, weight 130 g
135.0301-0SIndustry modelPin lever, 7 jewels
1/5 sec. + 1/100 min. 30 min.Case � 55 mm, weight 130 g
9
M E C H A N I C S
135.4101-5SIndustry modelPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
135.5709-0SHorsemen’s
Pin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 130 g
135.0165-XSSplit-seconds addition timer with
flyback and rotating countdown bezelPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
Addition timerwith drag indicator
Industry model
Precision mechanics with mineralglass, metal crown and metal com-fort button.
“Horsemen’s“
Extra-large numbers, crown and1 button, with drag indicator andleather wrist loop for equestriansports.
Split-seconds addition timer withflyback and rotating countdownbezel
The numerals ring on the rotatingcountdown bezel helps achieveexactly the correct time specifica-tions (seconds) for individual meas-uring processes. The drag indicatorallows split times to be measured,while the flyback function allowstiming to be started immediatelywith no time lost from the currentmeasuring process.
135.0101-5SIndustry modelPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
10
Addition timer
Addition timer for time measure-ment with interrupt option.
All models have a diamond-cut,chrome-plated brass case,polished or matt.All models are protected againstshock, dust and water.
The models with lever escapementhave additional case seals to giveadded protection against dust andwater.
CalibrationSee description on page 40.
122.0101-00Pin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
122.0401-00Pin lever, 7 jewels1/10 sec. 15 min.
Case � 55 mm, weight 120 g
122.0201-00Industry modelPin lever, 7 jewels1/100 min. 30 min.
Case � 55 mm, weight 120 g
122.0301-00Industry modelPin lever, 7 jewels
1/5 sec. + 1/100 min. 30 min.Case � 55 mm, weight 120 g
P R E C I S I O N
125.4101-5SIndustry modelPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
125.0101-5SWhite dial
11
Addition timer
“Robust 200“
Precision mechanics with mineralglass, metal crown and button.With this special model, Hanharthas taken account of the require-ments of industry and craftsmen.
The glass parts are resistant toscratching and acid. The metalbuttons and crowns are extremelyrobust and resistant to solventsand thinners.
Especially suitable for use in thechemical industry, paint workshopsor photographic laboratories.
“Allsport“
Universal referee’s stop watch.
Scale goes up to 60 min.20, 35, 45 and 60 min. marked inyellow.
Addition timer with flyback androtating countdown bezel
The numerals ring on the rotatingcountdown bezel helps achieveexactly the correct time specifica-tions (seconds) for individual meas-uring processes. The flyback func-tion allows timing to be startedimmediately with no time lost fromthe current measuring process.The large numerals on the whitedial make the watch very easy toread.
Industry model
With tough metal crown and metalbutton.
125.0165-XSAddition timer
with flyback and rotatingcountdown bezelPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
122.6401-00Allsport
Pin lever, 7 jewels1/5 sec. 60 min.
Case � 55 mm, weight 120 g
125.0104-0SRobust 200Lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 135 gMineral glass, metal crown
and button
M E C H A N I C S
12
126.7701-00Hours counterLever, 11 jewels
1/5 sec. 60 min. + 10 hoursCase � 55 mm, weight 130 g
126.7801-00Hours counterLever, 11 jewels
1/5 sec. + 1/100 min. 60 min. + 10 hoursCase � 55 mm, weight 130 g
126.4365-50Hours counterLever, 11 jewels
1/5 sec. 60 min. + 10 hoursRotating countdown bezelCase � 55 mm, weight 120 g
126.7765-50White dial
P R E C I S I O N
Addition timer
Hours counter
Specially designed for measuringlong periods of time, this additiontimer is fitted with a 10-hour coun-ter, a black seconds hand and ared, jumping minutes hand.
Fast running timer1/100 sec. gradation
126.0801-00Fast running timerlever, 11 jewels
1/100 sec. gradation,90 sec. display timeHand revolution 3 sec.Runs approx. 16 min.
Case � 55 mm, weight 125 g
185.4765-5EMega Minute
with flyback and rotatingcountdown bezelLever, 7 jewels1/5 sec. 60 min.
Case � 55 mm, weight 120 g
13
185.7901-00Mega MinuteLever, 7 jewels1/5 sec. 60 min.
Case � 55 mm, weight 125 g
185.8001-00Mega Minute - Industry model
Lever, 7 jewels1/100 min. 60 min.
Case � 55 mm, weight 125 g
185-7965-5EMega Minute
with flyback and rotatingcountdown bezelLever, 7 jewels1/5 sec. 60 min.
Case � 55 mm, weight 120 g
Addition timer
“Mega Minute“
Stopwatch with sprung centralminutes hand for measuring upto 60 minutes.
Excellent readability thanks todouble-sized minute scale incontrasting colour, and sprungminutes hand.
All models have precision levermovements (7 jewels). Shock-protection, additional dust andwater protection.
All models have a diamond-cut,chrome-plated and polished brasscase.
“Mega Minute“ with flyback androtating countdown bezel
Stopwatch with sprung centralminutes hand for measuring up to60 minutes. The numerals ring onthe rotating countdown bezelhelps achieve exactly the correcttime specifications (seconds) forindividual measuring processes.The flyback function allows timingto be started immediately with notime lost from the current measur-ing process.
M E C H A N I C S
14
Addition timerin ABS case
As well as its stopwatches in metalcases, Hanhart also offers moreinexpensive addition timers infunctional ABS plastic cases. Verylightweight and easy to handle.
CalibrationSee description on page 40.
121.0117-00Pin lever, 1 jewel1/5 sec. 30 min.
Case � 55 mm, weight 80 g
121.0417-00Pin lever, 1 jewel1/10 sec. 15 min.
Case � 55 mm, weight 80 g
121.0217-00Industry modelPin lever, 1 jewel1/100 min. 30 min.
Case � 55 mm, weight 80 g
121.0317-00Pin lever, 1 jewel
1/5 sec. + 1/100 min. 30 min.Case � 55 mm, weight 80 g
P R E C I S I O N
185.8616-00Mega MinuteLever, 7 jewels1/10 sec. 30 min.
Case � 64 mm, weight 85 g
15
Addition timerin ABS case
“Lumen“
For use in industry and, especially,in laboratories, Hanhart offers twowatches in its precision mechanicsrange with luminous dials.
Once the special dial has been“charged” with light (takes approx.1 hr.), the face will glow in thedark for approx. 3-4 hours so it isclearly readable. This requires noadditional energy or radiatingmaterials. This useful property isachieved by using an innovativeplastic material containing light-storing pigments.
The practical ABS case of the“Lumen” has additional dust andwater protection.
In a special production process, theglass and the glass fixing ring aremoulded together and then firmlyscrewed to the case.
Of course, these watches are alsopopular with athletes, as theyalways have been.
“Mega Minute“
Excellent readability thanks todouble-sized minute scale andsprung minutes hand.
All models have precision levermovements (7 jewels).Shock-protection, additional dustand water protection.Unlike rival products, all Hanhart“Mega Minute“ stopwatches havea sprung minutes hand.
ABS special case � 64 mm.The glass is injected directly intothe glass fixing ring, and the ringand case are screwed together.
185.8416-00Mega MinuteLever, 7 jewels1/5 sec. 60 min.
Case � 64 mm, weight 85 g
121.1515-00Lumen
Pin lever, 1 jewel1/5 sec. 30 min.
Case � 55 mm, weight 80 g
121.1615-00Lumen
Pin lever, 1 jewel1/10 sec. 15 min.
Case � 55 mm, weight 80 g
M E C H A N I C S
16
Crown stopper
All models have a diamond-cut,chrome-plated and polished brasscase. All models are protectedagainst shock, dust and water.
These models have additional caseseals to give extra protectionagainst dust and water.
CalibrationSee description on page 40.
112.0101-00Pin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 g
112.0201-00Industry modelPin lever, 7 jewels1/100 min. 30 min.
Case � 55 mm, weight 120 g
112.0301-00Industry modelPin lever, 7 jewels
1/5 sec. + 1/100 min. 30 min.Case � 55 mm, weight 120 g
112.0401-00Pin lever, 7 jewels1/10 sec. 15 min.
Case � 55 mm, weight 120 g
P R E C I S I O N
17
Crown stopper
“Robust 100“
Precision mechanics with mineralglass and metal crown.
With this special model, Hanharthas taken account of the require-ments of industry and craftsmen.The glass parts are resistant toscratching and acid. The metalcrown is extremely resistant tosolvents and thinners.
Especially suitable for use in thechemical industry, paint workshopsor photographic laboratories.
“Big 1/10 sec.“
A particular speciality of Hanhartprecision mechanics is the stop-watch with large-scale 1/10 sec.gradation.
“Pulse/breathing rate“
Specially for measuring pulse andbreathing rate. Based on 15 pulsebeats or 5 breaths.
“Tachy/Telemeter“
This stopwatch with its specialtachy- and telemeter scales is idealfor accurate speed control.
Outer scale: Tachymeter,speedometer
Measuring distance: 200 m
Middle scale: 1/5 sec.gradation
Inner scale: Telemeter,noise levelmeterup to 20 km
CalibrationSee description on page 40.
115.0501-00Big 1/10 sec.Lever, 7 jewels1/10 sec. 5 min.
Running time approx. 3 hoursCase � 55 mm, weight 120 g
112.7001-00Pulse/breathing ratePin lever, 7 jewels1/10 sec. 30 min.
Case � 55 mm, weight 120 g
115.6701-5STachy/TelemeterPin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 120 gmetal crown
115.0104-0SRobust 100
Pin lever, 7 jewels1/5 sec. 30 min.
Case � 55 mm, weight 135 gMineral glass, metal crown
M E C H A N I C S
18
Crown stopperin ABS case
As well as its stopwatches in metalcases, Hanhart also offers moreinexpensive crown stoppers infunctional ABS plastic cases withpendant ring. Very lightweight andeasy to handle.
CalibrationSee description on page 40.
111.0117-00Pin lever, 1 jewel1/5 sec. 30 min.
Case � 55 mm, weight 75 g
111.0417-00Pin lever, 1 jewel1/10 sec. 15 min.
Case � 55 mm, weight 75 g
111.0317-00Industry modelPin lever, 1 jewel
1/5 sec. + 1/100 min. 30 min.Case � 55 mm, weight 75 g
111.0217-00Industry modelPin lever, 1 jewel1/100 min. 30 min.
Case � 55 mm, weight 75 g
P R E C I S I O N
19
Day timer
Modelled on the traditionalHanhart pocket watches, thesewatches show hours and minutesand have a small seconds.
850.0901-50Day timer
Movement: ETA 6497/2Lever, 17 jewels, small secondsCase � 55 mm, weight 120 g
850.4901-00Day timer
Movement: ETA 6497/2Lever, 17 jewels, small secondsCase � 55 mm, weight 120 g
M E C H A N I C S
20
Addition timerin ABS case
“Felix“
“Felix” is a technically simpleand robust addition timer in theHanhart mechanical range.The winding mechanism for theshock-protected pin lever move-ment is located on the reverse.The robust ABS case comes with acord for hanging round the neck.
164.3120-00Felix red
Pin lever, 0 jewels1/5 sec., display time 10 min.Case � 55 mm, weight 75 g
164.3119-00Felix black
164.3419-00Felix black
Pin lever, 0 jewels1/10 sec., display time 5 min.Case � 55 mm, weight 75 g
164.3420-00Felix red
174.3219-00Felix black
Pin lever, 0 jewels1/5 sec., display time 30 min.Case � 55 mm, weight 75 g
174.3220-00Felix red
174.3620-00Felix red
Pin lever, 0 jewels1/10 sec., display time 15 min.Case � 55 mm, weight 75 g
174.3619-00Felix black
F E L I X - A M I G
21
Addition timerin ABS case
“Amigo”
The “Amigo” is the classic amongthe more inexpensive additiontimers in the mechanical range.The winding mechanism for theshock-protected pin lever move-ment is located on the reverse.The robust ABS case comes witha cord for hanging round the neck.
“Tristop”
The “Tristop” in Hanhart’s mechan-ical range is designed as a 3-scalestopwatch. This means that thetime is even easier to read thanksto a 10-times enlarged 1/10 sec.display.The winding mechanism for theshock-protected pin lever move-ment is located on the reverse.The robust ABS case comes witha cord for hanging round the neck.
152.8335-00Tristop
Chrome-plated backPin lever, 7 jewels, 1/10 sec. 30 min.
Case � 55 mm, weight 85 g
141.0134-00Amigo
Pin lever, 1 jewel, 1/5 sec. 30 min.Case � 55 mm, weight 85 g
141.0135-00Chrome-plated back
141.0434-00Amigo
Pin lever, 1 jewel, 1/10 sec. 15 min.Case � 55 mm, weight 85 g
141.0435-00Chrome-plated back
141.6434-00Amigo
Pin lever, 1 jewel, 1/5 sec. 60 min.Case � 55 mm, weight 85 gReferee’s watch 20, 35, 45 and60 min. marked in yellow
141.6435-00Chrome-plated back
O - T R I S T O P
22
Model Catalogue +/- sec.- Time Display Battery change Water protection page month measuring times warning
buttons
Stratos 2 31 30 2 1 •Stopstar 2 31 30 2 1 •Profil 1 30 30 2 1 yes Profil 25 30 7 2 1.5 yesSprint 31 30 2 1 •Modul 1 26 14 1 1.5 • yesModul 3 24 14 1 1.5 • yes Magma 10 26 7 1 2 yesMagma Pro 27 7 1 2 yes
Delta E 100 28 7 2 2.5 • water protectedDelta E 200 28/29 7 2 2.5 • water protected Spectron 37 7 2 2.5 • water protected Accord 1 38 14 1 1 • yesAccord 2 38 14 1 1 • yes Compact 38 30 1Labor 3 39 30 3Labor 2 39 30 1Labor 1 39 30 1
Selection criteria
Hanhart has been one of the leadingproducers of electronic stopwatchessince 1976. Initially, the companymade them with LED displays (lightdiodes), but since 1982 it has beenusing LCD technology. This kind ofdisplay brings significant benefits interms of information content andenergy consumption, and so in-creases running times.Since 1989, Hanhart has been using“chip on-board” technology, due tothe smaller and more ergonomiccase designs combined with muchincreased functionality. It bringswith it significant improvements inquality.
Brief description of the functions
Start/stop: individual time measure-ment with no interruption.
Addition: time measurement withinterrupt option.
Split: split time measurement whiletiming continues.
Dual measurement: for measuringtwo times in quick succession.
Lap: circuit or section times. Aftereach stop, a new measuring processbegins automatically at time “0”.
Short lap: shortest lap time.
Countdown: count down for a freelyprogrammable period of time, at“0” a signal sounds.
Count-up: incremental counting/ stopwatch function.
Autorepeat: automatic repeating atthe end of the programmed time.
Pacer: acoustic pace-setter, freelyadjustable.
Memory: memories which can beretrieved separately after the timerecording has finished.
Reset: zero-setting.
Memory reset: deletes memory.
System reset: complete resetting ofthe stopwatch functions.
24-month Hanhart guarantee.
Stopwatches with relatively fewfunctions mainly use one-line displays,while multifunction stopwatchesusually use multi-line displays.
One-line displayLarge numerals and symbols.Clear display!
Multi-line displayWhere there is a wide range offunctions, more information isshown on the display.
Water protectionThe watches shown in the tablebelow as having water protection“yes” have additional seals and aretherefore resistant to sprayed orsplashing water. The watchesmarked as “water resistant” aretested by Hanhart at a pressure of2 bar. They remain undamaged afterlong periods in water up to 10 mdeep.
In order to keep the watches water-resistant over many years, theyshould be serviced by a specialistapprox. every 2 years.
Start/Stop, Split and Lap timing arethe most important operations whenusing a stopwatch. Depending on themodel, these can be carried out using1 or 2 buttons.
1-button operationAll the above operations are carriedout using one button. No accidentalmistakes!
2-button operationStart/Stop and Split or Lap are oper-ated using two separate buttons.
Temperature rangeAll Hanhart electronic stopwatcheswork in a temperature range fromabout -15° to +55°C.
Temperature range for“Labor 1, 2, 3”Ambient temperature from +5°Cto +40°C, storage temperature from-20°C to +70°C.
Q U A L I T Y E L
Addition Split Lap Short lap Memory Countdown Count-up after Auto- Time Date Special featureswith signal countdown repeat
• •S • •
• • Can be calibrated • • • 25 •
• • • • •M • • • 60 • •
• • • 60 • auto • • With external connector • • • • 10 • • • • • • 10 • auto • • Pacer and display light
also with external connector d • • • • 65 • •
D d • • • • 65 • auto • • Pacer, also with external connector d • • • (•) 65 • auto • • 1/100 min. + 1/100 sec. (•)
• • 60 • • 1/100 min. • • 60 • • 1/100 min. Printer connection for Printo
• • • • • • •
L • • • • •
E C T R O N I C S
24
Memory stopwatches1-button operation
“Modul 3“
Measuring range: 1/100 sec.LCD display: 1.5 linesTop line: 7-digitBottom line: 2 digits for
memory displayNumeral height: 6 mmDisplay range: 9 hrs., 59 min.,
59.99 sec.Internally: 23 hrs., 59 min.,
59.99 sec.Memories: 60 per time typeSize: 82 x 61 x 28 mmWeight: approx. 90 gBattery: AA 1.5 VBattery life: approx. 2 years
Functions:Start/Stop/ResetSplit/Lap/Addition – all three timescan be switched at any timeSplit time can be set in advance ofthe actual timeSeparate system and memory resetCountdown with repeatTime of day, date
60 memories:for Split/Lap/Addition
If a “Printo” is purchased at alater date, the “Modul 3” can beconnected straightaway with nomodification.
“Modul 3“
With connection for 1/100 sec.light barrier.
Supplied with protective pouchand cord.
262.1762-00Modul 31/100 sec.
262.1763-00Modul 31/100 sec.
With light barrier connection
Q U A L I T Y E L
25
Thermal printer
“Printo“ thermal printer
Scope of delivery as for the “Printo”set without the “Modul 3” stopwatch.16 digits per line, approx. 8000printouts per battery set.
Sequential no.: 3-digitPrintout if stopwatch startsat “0”: 9 hrs., 59 min.,
59.99 sec.Printout if stopwatch startsfrom actual time: 23 hrs., 59 min.,
59.99 sec.Temperaturerange: -5°C to +50°CSize: 120 x 85 x 35 mmWeight: approx. 200 gBattery: 4 x AAA, 1.5 V
Alkaline
Functions:Can be connected to “Modul 3”Printout of: Split, Lap and AdditiontimesMarker for time type, sequentialnumber printout
Two basic functions:a) The memory of the “Modul 3” isreleased again after outputtingto the printer (to record times ofmore than 60 participants).
b) Memory content of the stopwatchis preserved. (Advantage: memo-ry content can be printed outmore than once with differenttime types.)
Thermal paper rollsLight barrier connection
“Printo” set
Consists of: “Printo” thermalprinter plus “Modul 3”.Case with foam insert, 2 rollsof paper for the printer, sparebatteries and connecting cable.
The “Modul 3” (60 memories) isconnected to the “Printo” printerby a connecting cable (plug-inconnection). The data recorded bythe stopwatch can be printedduring or after the recording.
CalibrationSee description on page 40.
902.1324-20Printo thermal printer
600.1700-00Printo set
E C T R O N I C S
Multi-function andmemory stopwatches1-button operation
“Modul 1”
Measuring range: 1/100 sec.LCD display: 1.5 linesTop line: 7-digitBottom line: 2-digitNumeral height: 6 mmDisplay range: 9 hrs., 59 min.,
59.99 sec.Internally: 23 hrs., 59 min.,
59.99 sec.Memories: 60 per time typeSize: 82 x 61 x 28 mmWeight: approx. 90 gBattery: AA, 1.5 VBattery life: approx. 2 years
Functions:Start/Stop/ResetSplit/Lap/Addition – all three timescan be switched at any timeSeparate system and memory resetTime of day, date
60 memories:for Split/Lap/Addition
“Magma 10” and “Magma Pro”
These models have two-line LCDdisplays for easy reading. Thanksto 1-button operation, there can beno accidental mistakes during timemeasurement. With 10 memorieseach, these two stopwatches arehighly versatile.
Supplied with protective pouchand cord.
26
260.1760-00Modul 11/100 sec.
236.1950-00Magma 101/100 sec.
Q U A L I T Y E L
27
“Magma 10” and “Magma Pro”have a robust, water-resistant ABScase and a very clear display andcome with a pouch and cord.
Measuring range: 1/100 sec.LCD display: 2 linesTop line: 6-digit + 2-digit
memory displayBottom line: 7-digit
Date, time,countdown pace-setter with“Magma Pro”
Numeral height: 6 mmDisplay range:Top line: 59 min., 59.99 sec.Bottom line: 9 hrs., 59 min.,
59.99 sec.Memories: 10 per time typeSize: 82 x 61 x 28 mmWeight: approx. 90 gBattery: AA, 1.5 VBattery life: approx. 2-4 years
“Magma 10”
Functions:Start/Stop/Reset –Addition/Split/Lap/Short LapSplit time can be set in advance ofthe actual timeTime of day, date
10 memories:10 each for Split/Lap/Addition(the first 9 times + the lastmeasured time)
“Magma Pro”With LCD light
Functions:Start/Stop/Reset –Addition/Split/Lap/Short LapSplit time can be set in advance ofthe actual timePacer (acoustic beat, 1-300 beats/min.)2 different countdowns (inter-ruptible and non-interruptible)with signalTime of day (can also be called upduring measuring)Split/Lap and time can be alternatedduring measurementDate
10 memories:10 each for Split/Lap/Addition(the first 9 times + the lastmeasured time)
237.1952-00Magma Pro1/100 sec.
With light barrier connection
237.1950-00Magma Pro1/100 sec.
With LCD light
E C T R O N I C S
Multi function andmemory stopwatches2-button operation
“Delta E 100” and “Delta E 200”
With its electronic hand-heldstopwatch range “Delta E 100”and “Delta E 200”, Hanhart isintroducing a new generation ofhigh-performance time measuringinstruments. The Delta series usessoftware specially developed byHanhart. These stopwatches arewater-resistant.
ABS plastic case, protective pouchwith cord.
Measuring range: 1/100 sec.LCD display: 2.5 linesTop line: 6-digit + battery
status displayBottom line: 7-digit
Function windowfor: Lap, ShortLap, normaltime, date,countdown,pacer2-digit memorydisplay
Numeral height: 7 mm/5 mmDisplay range:Top line: 59 min., 59.99 sec.Bottom line: 9 hrs., 59 min.,
59.99 sec.Memories: 65 per time typeSize: 90 x 60 x 19 mmWeight: approx. 85 gBattery: AAA, 1.5 VBattery life: approx.
5 to 7 years
CalibrationSee description on page 40.
28
245.1945-00Delta E 100
245.1944-00Delta E 100Black case
245.1946-00Delta E 200
Q U A L I T Y E L
“Delta E 100”
Functions:Start/Stop/ResetAddition/Split/Lap/Short LapSplit time can be set in advance ofthe actual timeTime of daySplit, Lap, Short Lap and time canbe alternated during measurementDate
65 memories:with evaluation, fast search
“Delta E 200”
Functions:Start/Stop/ResetAddition/Split/Lap/Short LapSplit time can be set in advance ofthe actual timePacer (1-300 beats/min.)Countdown Countdown and stopwatch can beused at the same timeTime of daySplit, Lap, Short Lap and time canbe alternated during measurementDate
65 memories:with evaluation, fast search
29
245.1947-00Delta E 200
With light barrier connection
E C T R O N I C S
Basic functionstopwatch2-button operation
“Profil 1” and “Profil 25”
All models have a robust, water-protected ABS case and a clearlyreadable LCD display, and theycome with a protective pouch andcord.
Measuring range: 1/100 sec.LCD display: 7-digit + 2 for
Event CounterNumeral height: 8 mmDisplay range: 9 hrs., 59 min.,
59.99 sec.Size: 82 x 61 x 28 mmWeight: approx. 90 gBattery: AA, 1.5 VBattery life: approx.
2-5 years
Functions of “Profil 1”:Start/Stop/Reset –Addition/Split/Dual measurement
“Profil 1” also comes ina version that can becalibrated. Your own Officeof Weights and Measurescan arrange this.
Functions of “Profil 25”:Start/Stop/Reset –Addition/Split/LapTime of day
25 memories:25 split times and 25 lap times
The “Profil 25” also has a functionwindow for Split, Lap and normaltimes.
CalibrationSee description on page 40.
30
220.1721-00Profil 11/100 sec.
225.1721-00Profil 251/100 sec.
221.1723-00Profil 11/100 sec.
Can be calibrated
19.202.01
19.202.01
Q U A L I T Y E L
“Sprint”
The “Sprint” is a very lightweightand easy to use stopwatch. Here,too, the normal time and date canbe called up.
Measuring range: 1/100 sec.LCD display: 6-digitNumeral height: 5 mmDisplay range: 59 min., 59.99 sec.Size: 55 x 58 x 16 mmWeight: approx. 35 g
Functions:Start/Stop/Reset –Addition/Split/Dual measurementTime of day: (2x12 hrs. a.m./p.m.)Date
The “Sprint” comes with an SR 44button cell battery.Battery life: approx. 2 years.
“Stopstar 2”
Measuring range: 1/100 sec.LCD display: 7-digitNumeral height: 7 mmDisplay range: 9 hrs., 59 min.,
59.99 sec.Size: 82 x 61 x 28 mmWeight: approx. 70 gBattery: AA, 1.5 VBattery life: approx.
2 to 5 years
Functions:Start/Stop/Reset –Addition/Split/Dual measurement
“Stratos 2”
Measuring range: 1/100 sec.LCD display: 7-digitNumeral height: 6.5 mmDisplay range: 9 hrs., 59 min.,
59.99 sec.Size: 66 x 70 x 21 mmWeight: approx. 62 gBattery: button cell SR 54Battery life: approx. 2 years
Functions:Start/Stop/Reset –Addition/Split/Dual measurement
31
205.1705-00Stratos 21/100 sec.
211.1710-00Stopstar 21/100 sec.
211.1712-00Stopstar 2Black case
280.1680-00Sprint
1/100 sec.
280.1681-00SprintRed case
E C T R O N I C S
I N D U S T R Y A N D L A B O R A T
Desktop timers
“Mesotron”
For all applications, includingschool, sport, laboratory andindustry use.
With the “Mesotron”, Hanhart isoffering a clearly readable, quartz-controlled analogue table-top/wall-mounted timer.The ergonomic design of this timermakes it very stable.The hands are luminous.
Measuring range: 0-60 sec. +1/100 min.
Analogue display:Outer scale: 0-60 sec.,
+ 0-60 min.Inner scale: 0-100/100 min.Dial: � 110 mmTemperature range:
-10°C to +70°CSize: 175 x 130 x 40/
95 mmWeight: approx. 375 gBattery: AA, 1.5 VBattery life: approx. 1-2 years
Functions:Start/Stop/Reset –Addition – Flyback
CalibrationSee description on page 40.
24-month Hanhart guarantee
“Mesotron“
+/- sec.-month 14Time measuring buttons 2Battery change warning •Addition •
33
T O R Y T I M E M E A S U R E M E N T
631.4031-00Mesotron
0-60 sec. + 1/100 min.
Desktop timers
“Prisma 200“ and “Prisma 400“
The desktop timers “Prisma 200”and “Prisma 400” are two practicalinterval up/down timers for use inindustry, laboratories and schools,and for sport and domestic pur-poses.
The “Prisma” range comes witha strong plastic case and anadjustable acoustic alarm.
Measuring range: 1/100 sec. or1/100 min.
LCD display: 2-line plusfunction window
Top line: 3-digitBottom line: 5-digitFunction window: 2-line, with
6 positionsNumeral height: 22/8 mmDisplay range:selectable a) 999 min.,
99/100 min.b) 9 hrs.,59 min.,59 sec.,1/10 sec.
Temperaturerange: -10°C to +55°CSize: 175 x 130 x 40/
95 mmWeight: 390 gBattery: AA, R 6Battery life: approx. 1-2 years
34
626.2626-00Prisma 400Blue case4 timers
Selectable: 1/10 sec. or 1/100 min.
I N D U S T R Y A N D L A B O R A T
35
T O R Y T I M E M E A S U R E M E N T
“Prisma 200“
2 timersSelectable: 1/10 sec. or 1/100 min.
Functions:Start/Stop/Reset –Addition – Flyback – Countdownwith adjustable acoustic alarm2 timers, fully programmable, withstart/stop activation either togetheror separatelyRepeat, manual or automaticTime of day
“Prisma 400”
4 timersSelectable: 1/10 sec. or 1/100 min.
Functions:Start/Stop/Reset –Addition – Flyback – Countdownwith adjustable acoustic alarm4 timers, fully programmable,with start/stop activationeither together or separatelyRepeat, manual or automaticTime of day
CalibrationSee description on page 40.
24-month Hanhart guarantee
“Prisma 200“ and “Prisma 400“
+/- sec.-month 7Time measuring buttons 2Display lines 2Battery change warning •Addition •Lap •Countdown with signal •Autorepeat •Time •Adjustable acoustic signal •
626.2625-00Prisma 400White case4 timers
Selectable: 1/10 sec. or 1/100 min.
625.2626-00Prisma 200Blue case2 timers
Selectable: 1/10 sec. or 1/100 min.
625.2625-00Prisma 200White case2 timers
Selectable: 1/10 sec. or 1/100 min.
Industrial timing1/100 min.
“Robotimer“
Industrial design
3 or 4 precision stopwatches with1/100 min. and item counter forwork processes or cycle counter.
• All times in a work process canbe recorded with no loss of data.
• Always ready for use thanks touse of reliable mechanical stop-watches.
201.6683-00Robotimer
3 crown stoppers Lever, 7 jewelsfor 3 x separate 30 minutes
times plus 1 addition timer Lever, 11 jewelsfor total time 10 hours
923.0748-00Item counter
4-digit with rotation to zero
I N D U S T R Y A N D L A B O R A T
36
251.1951-00Spectron
1/100 min. + 1/100 sec.
Industrial timing1/100 min., 1/100 sec.
“Spectron“
2-button operation
Selectable: 1/100 min.,1/100 sec.
LCD display: 2.5 linesTop line: 6-digit plus
battery statusdisplay
Bottom line: 7-digitFunction window: for Lap/normal
timeMemory display: 2-digitNumeral height: 7 mm/5 mmDisplay range:Top line: 9999.99 min.Bottom line: 99999.99 min.Size: 82 x 61 x 28 mmWeight: 85 gBattery: AAA, 1.5 VBattery life: approx.
5-7 years
Functions at 1/100 min.:Start/Stop/Reset –Split/Lap/AdditionSplit and Lap can be read at thesame timeTime of day, date
65 memories:for Split and Lap
Functions if switchedto 1/100 sec.Technical data as for the“Delta E 200”(see description on page 28-29).Start/Stop/Reset –Addition/Split/Lap/Short LapSplit time can be set in advanceof the actual timeCountdownCountdown and stopwatch can beused at the same timeTime of day, date
65 memories:with evaluation, fast search
Supplied with protective pouchand cord.
CalibrationSee description on page 40.
T O R Y T I M E M E A S U R E M E N T
37
Industrial timing1/100 min.“Accord 1”1-button operation
Measuring range: 1/100 min.LCD display: 1.5 linesTop line: 7-digitMemory display:Bottom line: 2-digitNumeral height: 6 mmDisplay range: 99999.99 min.Size: 82 x 61 x 28 mmWeight: 90 gBattery: AA, 1.5 VBattery life: 2-5 yearsFunctions:Start/Stop/Reset – Split/LapThe two times can be switched atany time. Separate system andmemory resetTime of day, date60 memories: for Split and Lap
“Accord 2“Extra: option of connecting toprinter, plug-in connection in thebattery cover. Technical data asfor the “Accord 1”. Supplied withprotective pouch and cord.
Short period timers1/1 sec.“Compact“
A short period timer with stop-watch function for industry andlaboratory use.
LCD display: 6-digitNumeral height: 8 mmDisplay range: 23 hrs., 59 min.,
59 sec.Size: 64 x 60 x 16 mmWeight: approx. 40 gBattery: button cell SR 44Battery life: approx. 2 yearsFunctions:Stopwatch (counting upwards)Countdown with alarm and repeatTime of day (24 hrs.)This model comes with a buttoncell battery (SR 44).Battery life: approx. 1-2 years.The timer has a clip for hanging orstanding it up and a magnet
38
291.4690-00Compact1/1 sec.
265.6765-00Accord 11/100 min.
265.6766-00Accord 21/100 min.
610.6700-00“Printo“-Set
“Accord 2“ + “Printo“Describtion of “Printo“ printer
see page 25
I N D U S T R Y A N D L A B O R A T
39
292.4492-00Labor 11/1 sec.
293.4693-00Labor 21/1 sec.
294.4994-00Labor 31/1 sec.
T O R Y T I M E M E A S U R E M E N T
Short interval timers1/1 sec.
“Labor 1, 2, 3“
Three short interval timers forindustry and laboratory use.
“Labor 1” is the model with aprogrammable countdown. Thepre-set time can be called uprepeatedly.LCD display: 4-digitNumeral height: 18 mmDisplay range: 59 min., 59 sec.Size: 76.2 x 66 x 18 mmWeight: approx. 60 g
Functions:Countdown (alarm at “0”)
“Labor 2” offers two programma-ble countdown or count-up timesor a normal time display. 2 timersin one device.LCD display: 6-digitNumeral height: 18 mm/10 mmDisplay range: 99 hrs., 59 min.,
59 sec.Size: 76.2 x 66 x 18 mmWeight: approx. 60 g
Functions:Countdown (alarm at “0”)Count-upTime of day: 12/24 hr. switchableDate
“Labor 3” has a triple display forthree separate, programmablecountdown or count-up times.The “Labor 3” also displays thenormal time.3 separate timers in one device.LCD display: 3 x 6-digitNumeral height: 8 mm/6 mmDisplay range: 99 hrs. 59 min.,
59 sec.Size: 83 x 70 x 22 mmWeight: approx. 80 g
Functions:Countdown (3x) (alarm at “0”)Count-upTime of day: 12/24 hr. switchableDateThese models come with a buttoncell battery (SR 44).Battery life: approx. 1-2 years.
All timers have a clip for hangingor standing them up and a magnet.
A D D I T I O N A L D E V I C
“Systema“
The “Systema” clipboard is a well-designed, useful item to help withtime-recording. The top sectionalso has an interchangeable partfor fitting an electronic stopwatch(with a clip) or a mechanical one(with a holding bracket) (see pho-to), so that both right- and left-handed people can use the stop-watch in an ergonomically correctposition.
“Systema” has an integral pen-holder and a clamp for an A4 padof paper. The device is easy to holdusing the carry strap or handle.
Colour: light grey
Size: 400 x 330 x 18/11 mm
Weight: approx. 770 g
Stopstand
For mechanical stopwatches inmetal or plastic cases(not incl. stopwatch).
CalibratingstopwatchesThe calibration of measuring devi-ces (including stopwatches) isbecoming ever more important inthe light of the monitoring of testequipment for compliance withISO 9000 ff.
Hanhart offers a calibrationservice which includes calibrationof watches and a CERTIFICATEof their accuracy.
Calibration certificates can beissued for the following watches:
• All mechanical stopwatchesexcept for the “Felix” range.
• The electronic stopwatches“Delta”, “Modul”, “Accord”,“Profil”, “Magma”, “Stopstar”,“Spectron”, “Mesotron”,“Prisma”.
40
901.0677-90Systema
Basic board excl. stopwatch holder
921.0582-40Carry strap
For hanging the “Systema”clipboard round your neck
(no illustration)
904.1389-40Calibration certificate
41
E S – A C C E S S O R I E S
905.0752-00Stopstand
For metal cases
905.0755-90Stopstand
For plastic casesCal. 111 + 121
901.0678-10Systema
With holding bracket formechanical metal stopwatches
(not incl. stopwatch)
901.0678-30Systema
With clip for electronic stopwatches(not incl. stopwatch)
905.0698-40Holding bracket
Metal holding bracket formechanical stopwatches(not incl. backing plate)
905.0752-20Plastic clip
For electronic stopwatches.Suitable for Stopstar, Profil, Accord,Magma 10 + Magma Pro, Modul, Delta,Spectron (not incl. backing plate)
A D D I T I O N A L D E V I C
Metal mountingplates for mechanicalstopwatches
Freely interchangeable, stopwatch-es can be easily fitted to the cardashboard using these speciallymade mounting plates.
Clever mechanics make handlingstopwatches easy as you fit themand remove them.
The stopwatches are held in placeby sturdy little supports with rub-ber pads and a fixing element withspring-loaded bearings. The stop-watches are pushed gently into thesprung mounting.
Stainless steel, polished.
Delivery does not includestopwatches.
Dimensions ofmetal mounting plate:
Single plateSize: 80 x 62 x 3 mm
Double plateSize: 140 x 62 x 3 mm
Triple plateSize: 200 x 62 x 3 mm
Leather clipboard
With paper holder and dashboardmounting plate for 3 mechanicalstopwatches.
Delivery does not includestopwatches.
42
901.0101-00Plate for 1 watch
901.0201-00Plate for 2 watches
901.0301-00Plate for 3 watches
43
E S – A C C E S S O R I E S
901.0301-60Leather clipboard
A. Hanhart GmbH & Co. KGWatch Manufactory
Hauptstraße 33 · 78148 Gütenbach/GermanyTelephone +49(0) 77 23 /93 44-0 · Telefax +49(0) 77 23 /93 44-40
www.hanhart-stopwatches.com
Top Related