GOLDEN APARTMENTS COMPLETE RENOVATION PROJECT 2312 N. Golden Ave San Bernardino, CA 92404 SUPPLEMENT TO: PLUMBING SPECIFICATIONS
• 22 Plumbing
o Re-Pipe PEX o Fixtures
Kitchen • Kitchen sink -33x22 Double bowl, drop-in, self-rimming, 8"deep, three
hole, stainless steel. HDS#500872 • Kitchen sink faucets to be Delta Single Handle #100LFWF (no spray
hose). ADA NO SUBSTITUTIONS • Sink Faucet Delta aerator flow must be less than 1.5 GPM • InSink Erator Badger 500 1/2HP with cord Garbage Disposal
Bath • Lavatory Sink Kohler Bryant 20 1/8” x 16 ½” oval white drop-in
#K26994-4-0 • ADA Lavatory Sinks American Standard Lucerne Wall-Hung Lavatory
White 4” center hole #0356.041. Must support minimum of 400lbs. • Lav Bath Faucets to be Delta Single Handle #523LFHDF ADA • New Angle Stops shall be "1/4 turn" ball valve style • New shower valves to be Delta #R10000-UNWS. • Shower head not to exceed 1.5 GPM • Toilet – 1.28 GPF. ADA American Standard Cadet PRO ELONGATED
WHITE • Shower doors - Deluxe bi-pass doors with chrome finish & textured
glass. HD # 501724 or equivalent. o Water Heater – TBD o Hose bibs shall be 1/4 turn, ball valve style w/key. o Laundry room needs floor drain. o All laundry wall drain pipe to be 2" ABS.
M19© 2008 AS America Inc. Revised 2/08
To Be Specified:❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Black ❏ Linen❏ Faucet*:❏ Faucet Finish:❏ Supplies:❏ 1-1/4" Trap:❏ Nipple:❏ Bracket Support (by others):❏ Concealed Arms Support (by others):
* See faucet section for additional models available
LUCERNE™WALL-HUNG LAVATORY
VITREOUS CHINA
LUCERNE™ WALL-HUNG LAVATORY
• Wall-hung sink• Vitreous china• Front overflow• D-shaped bowl• Self-draining deck area with contoured back and side splash shields• Faucet ledge
Faucet holes on 203mm (8") centers (Illus.):❏ 0356.028 For exposed bracket support Shown with 4801.862 Amarilis Heritage faucet with Triune Cross handles (not included)❏ 0356.015 For wall hanger (included) or concealed arms support❏ 0356.037 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0356.073 For wall hanger (included) or concealed arms support • Extra left-hand hole
Faucet holes on 102mm (4") centers:❏ 0355.027 For exposed bracket support❏ 0355.012 For wall hanger (included) or concealed arms support❏ 0355.034 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0355.056 For wall hanger (included) or concealed arms support • Extra left-hand hole
Single center faucet hole (Illus.):❏ 0356.041 For exposed bracket support Shown with 1340.000 metering faucet (not included)❏ 0356.421 For wall hanger (included) or concealed arms support❏ 0356.137 For wall hanger (included) or concealed arms support • Extra right-hand hole❏ 0356.115 For wall hanger (included) or concealed arms support • Extra left-hand hole
Nominal Dimensions: 521 x 464mm(20-1/2" x 18-1/4")
Bowl sizes:381mm (15") wide254mm (10") front to back 165mm (6-1/2") deep
Compliance Certifications -Meets or Exceeds the Following Specifications:• ASME A112.19.2 for Vitreous China Fixtures
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-LINES AND ANSI A117.1 ACCESSIBLE AND USABLEBUILDINGS AND FACILITIES - CHECK LOCAL CODES.Top of front rim mounted 864mm (34") from finished floor.
0356.028
0356.041
BARRIER FREE
M20© 2008 AS America Inc.
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
203 mm(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*286 mm(11-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31) 864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
203 mm(8)
0356.015 8" CTRS FOR WALL HANGER OR CONCEALED ARMS
0356.037 8" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA RIGHT HAND HOLE
NOTES:* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.
LUCERNE™WALL-HUNG LAVATORY
VITREOUS CHINA
0356.073 8" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA LEFT HAND HOLE
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
54mm(2-1/8) 203 mm
(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*286 mm(11-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31) 864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
203 mm(8)
165 mm(6-1/2)
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
54mm(2-1/8)
203 mm(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*286 mm(11-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31) 864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
203 mm(8)
165 mm(6-1/2)
Revised 8/05
BARRIER FREE
M21© 2008 AS America Inc. Revised 8/05
102 mm(4)
152 mm(6)
152 mm(6)
102 mm(4)
86 mm(3-3/8)
203 mm(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*260 mm(10-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
0355.012 4" CTRS FOR WALL HANGER OR CONCEALED ARMS
0355.034 4" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA RIGHT HAND HOLE
NOTES:* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.
LUCERNE™WALL-HUNG LAVATORY
VITREOUS CHINA
0355.056 4" CTRS FOR WALL HANGER OR CONCEALED ARMS EXTRA LEFT HAND HOLE
102 mm(4)
152 mm(6)
152 mm(6)
102 mm(4)
86 mm(3-3/8)
203 mm(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*260 mm(10-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
54 mm(2-1/8)
165 mm(6-1/2)
102 mm(4)
152 mm(6)
152 mm(6)
102 mm(4)
86 mm(3-3/8)
54 mm(2-1/8) 203 mm
(8)
8 mm(5/16)
464 mm(18-1/4)
521 mm(20-1/2)
13 mm(1/2)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
25 mm(1)
79 mm(3-1/8)
267 mm(10-1/2)
425 mm(16-3/4)
114 mm(4-1/2)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES203 mm
(8)
SUPPLIESAS REQUIRED
1-1/4 O.D. WASTEOUTLET FORDRAIN PLUG
1-1/4 O.D. WASTEOUTLET FORPOP-UP DRAIN
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
206 mm(8-1/8)
*260 mm(10-1/4)
298 mm(11-3/8)*
352 mm(13-7/8)*
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
165 mm(6-1/2)
BARRIER FREE
M22© 2008 AS America Inc. Revised 9/04
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
203 mm(8)
8 mm(5/16)
464 mm(18-1/4)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
79 mm(3-1/8)
425 mm(16-3/4)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES
206 mm(8-1/8)
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
25 mm(1)
267 mm(10-1/2)
114 mm(4-1/2)
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.PUNCHING
521 mm(20-1/2)
13 mm(1/2)
44mm (1-3/4) DIA.STD. OUTLET
0356.421 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS
0356.137 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS WITH EXTRA RIGHT HAND HOLE
NOTES:* DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.CONCEALED ARM SUPPORT AS REQUIRED TO BE FURNISHED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
LAVATORY DESIGNED TO MEET ADA HANDICAPPED GUIDELINES WITH MOUNTING HEIGHT SET AT 864MM (34") ABOVE FINISHED FLOOR.
LUCERNE™WALL-HUNG LAVATORY
VITREOUS CHINA
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
54 mm(2-1/8) 203 mm
(8)
8 mm(5/16)
464 mm(18-1/4)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
79 mm(3-1/8)
425 mm(16-3/4)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES
206 mm(8-1/8)
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
25 mm(1)
267 mm(10-1/2)
165 mm(6-1/2)
114 mm(4-1/2)
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.PUNCHING
521 mm(20-1/2)
13 mm(1/2)
44mm (1-3/4) DIA.STD. OUTLET
102 mm(4)
152 mm(6)
152 mm(6)
86 mm(3-3/8)
54 mm(2-1/8) 203 mm
(8)
8 mm(5/16)
464 mm(18-1/4)
FINISHEDWALL
(6) 25mm (1") DIA.ACCESS HOLES
FOR CONC. ARMS
102 mm(4)
79 mm(3-1/8)
425 mm(16-3/4)
44 mm(1-3/4)
38 mm(1-1/2)
10mm (3/8)DIA. ANCHOR
SCREW HOLES
206 mm(8-1/8)
787mm (31)864mm (34)
FINISHEDFLOOR
54mm (2-1/8) DIA.HOLES FORCONCEALED ARMS
25 mm(1)
267 mm(10-1/2)
165 mm(6-1/2)
114 mm(4-1/2)
27mm X 14mm(1-1/16 x 5/16) SLOTS
S-9 HANGER
25mm (1-3/8) DIA.PUNCHING
521 mm(20-1/2)
13 mm(1/2)
44mm (1-3/4) DIA.STD. OUTLET
0356.115 SINGLE CENTER HOLE FOR WALL HANGER OR CONCEALED ARMS WITH EXTRA LEFT HAND HOLE
BARRIER FREE
Features• With overflow.• 4" (102 mm) centers.• 20-1/8" (511 cm) x 16-1/2" (419 cm)
Material• Vitreous china.
Installation• Drop-in
Recommended AccessoriesK- 7107 Decorative DrainK- 7108 Decorative DrainK- 7129 Drain
CSA B651K- 9018 P-Trap
Codes/StandardsASME A112.19.2/CSA B45.1ADAICC/ANSI A117.1CSA B651
KOHLER® One-Year Limited WarrantySee website for detailed warranty information.
Available Color/FinishesColor tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice™ Grey95
SandbarG9
Mexican Sand™33
CashmereK4
Thunder™ Grey58
Black Black™7
USA/Canada: 1-800-4KOHLER (1-800-456-4537)Kohler Co. reserves the right to make revisions without notice to product specifications.For the most current Specification Sheet, go to www.kohler.com.3-28-2016 03:38
Bryant®
Bathroom SinkK-2699-4
16-1/2"
NotesTechnical InformationInstall this product according to the installationguide.
All product dimensions are nominal.Drop-InInstallation:
Spout must be 5" (12.7 cm) long (min) foradequate clearance into the lavatory wheninstalled with the centerline as shown.
Length: 17-3/8" (441 mm)Width: 11-1/8" (283 mm)Water depth: 5-5/8" (143 mm)
Bowl area
Spout must be tall enough to clear 3" (7.6 cm)rim height and provide a 1" (2.5 cm) air gap perASME A112.1.1.
3Number of deck holes:1-1/4" (32 mm)Faucet hole(s):7/8" (22 mm)Drain hole:
NOTICE: Countertop manufacturer or cutter mustuse the cut-out template provided with the
Drop-in, 1155261-7, required, includedTemplate:
product, or a current one provided by Kohler Co.(call 1-800-4-KOHLER). Kohler Co. is notresponsible for cutout errors when the incorrectcut-out template is used.
ADA, CSA B651 compliant when installed to thespecific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)Kohler Co. reserves the right to make revisions without notice to product specifications.For the most current Specification Sheet, go to www.kohler.com.3-28-2016 03:38
Bryant®
Bathroom SinkK-2699-4
COMPLIES WITH:• ASME A112.18.1 / CSA B125.1• ASME A112.18.2 / CSA B125.2 Indicates compliance to ICC/ANSI A117.1• EPA WaterSense®
• Verified compliant with .25% weighted average Pb content regulations.
lavatory FaUCEtS■ Single Handle■ 3 Hole Sink Applications ■ 4" (102 mm) CentersetSubmitted Model No.: _______________________________________________
Specific Features: __________________________________________________ STANDARD SPECIFICATIONS: • Single handle lavatory deck faucets for exposed mounting on three hole sinks.• 4" (102 mm) centerset.• All metal fabricated body.• 5" (127 mm) spout.• Vandal resistant aerator or spray outlet.• Metal grid strainer (523).• Metal pop-up drain (520).• Lift rod hole (520).• Vandal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature.• Control mechanism is the diamond embedded ceramic disc cartridge.• Control handle shall return to the neutral position when valve is turned off.• Adjustable handle limit stop.• 3/8" O.D. straight, staggered copper supply tubes with 3/8" fittings.• Available options for field conversion: 6" (152 mm) long elbow handle-red/blue colored graphics indicate hot/cold temperature. Order RP54687.
• Maximum 1.5 gpm flowrate @ 60 PSI. HGM (models only) max. 0.5 gpm flowrate @ 60 PSI. TGM (models only) max. 0.35 gpm flowrate @ 60 PSI.
DSP-L-501LF-HDF Rev. C
2" (51 mm) Max. Deck Thickness6 13/32"
(163 mm)
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure (PSI)
Flo
w (
U.S
. Gal
lon
s P
er M
inu
te) 6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flo
w (L
iters Per M
inu
te)
HGM Models OnlyTGM Models Only
®
®
U P C
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
5"(127 mm)
6 9/16"(167 mm)
1 13/16"(46 mm)
55 E. 111th Street, Indianapolis, Indiana 46280350 South Edgeware Road, St. Thomas, ON N5P 4L1© 2012 Masco Corporation of Indiana
WARRANTy• Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship.• 5 Year Limited Warranty for usage in all industrial, commercial and business applications.
5"(127 mm)
5 5/16"(135 mm)
▲ Designate proper finish suffix
Min. 1 1/2"
(38 mm)Dia. Hole
Size
Min. 2 1/2" (64 mm) Clearanceto Back Splash
501LF-HDF▲501LF-HGMHDF▲501LF-TGMHDF
520LF-HDF▲520LF-HGMHDF▲520LF-TGMHDF
523LF-HDF▲523LF-HGMHDF▲523LF-TGMHDF
4" Centers(102 mm)
6 1/2"(165 mm)
Metal Grid Strainer
1 5/8" (42 mm)
to2 3/8"
(61 mm)
2 1/8" (54 mm)
Dia.
1 3/8" (35 mm)
Dia.8"
(203 mm)
1 1/4" (32 mm)
Dia.
3 3/8"(86 mm)
1 3/8"(35 mm) Dia.
1 1/4"(32 mm) Dia.
2 1/8"(54 mm) Dia.
4 5/8"(117 mm)
1 5/8" (41 mm) to2 3/8" (60 mm)
Metal Pop-Up
1″ (25 mm) Max. Deck Thickness
3/8″ (10 mm) Dia.Tubes 10″ (254 mm) Long
1 3/16″ (30 mm)
Dia.
7 13/16″ (198 mm)
8 3/4″ (221 mm)
Max.
4″(102 mm) -6″(152 mm) -8″(203 mm)360 Swing Spout
CL 2 1/16″ (52 mm)
8″ (203 mm) Centers 1/2″-14 NPSM - Adapter Suffix WF Models Only
3/8″ (10 mm)
Dia.
1 1/4″ (32 mm) Max. DeckThickness
7/8″ (22 mm)
Dia.
2″ (51 mm)
Dia.
4 3/4″(121 mm)
A
KITCHEN FAUCETS■ Classic Series■ Single Handle Deck Mount■ 3 and 4 Hole Sink Applications
Submitted Model No.: _______________________________________________Specific Features: __________________________________________________
STANDARD SPECIFICATIONS: • Maximum flow rate 1.8 gpm @ 60 PSI, 6.8 L/min @ 414 kPa.• Solid brass fabricated body.• Standard 8" (203 mm) long spout swings 360°.• Control handle shall return to neutral position when faucet is turned off.• Lever handle. Control mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets.• Model 400 series with spray attachement has anti- siphon device as integral part of valve body.• Model 100 and 400 series without dispenser can be field converted from 8" (203 mm) to 6" (152 mm) centers.• 3/8" O.D. copper tube inlets - 10" (854 mm) long.• Vegetable sprayer hose with chrome sprayhead on model 400 series - 45" (1143 mm) long threaded hose.• Models supplied with 1/2"-14 NPSM adapters.
400LF-WF100LF-WF
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.deltafaucet.com for finish options and product availability.DSP-K-100LF-WF Rev. C
Dimension A1 7/8" (48 mm) -4" (102 mm) Spout (RP5881)3 1/2" (89 mm) -6" (152 mm) Spout (RP9633)5" (127 mm) -8" (203 mm) Spout (Standard)
WARRANTY• Lifetime limited warranty on parts (other than electronic parts and batteries) and inishes; or, for commercial users, for 5 years from the date of purchase. • 5 year limited warranty on electronic parts (other than batteries); or for commercial users, for 1 year from the date of purchase. No warranty is provided on batteries.
55 E. 111th Street, Indianapolis, Indiana 46280350 South Edgeware Road, St. Thomas, Ontario Canada N5P 4L1© 2015 Masco Corporation of Indiana
COMPLIES WITH:• ASME A112.18.1 / CSA B125.1
Indicates compliance to ICC/ANSI A117.1
• Verified compliant with .25% weighted average Pb content regulations.
K174© 2013 AS America Inc. Rev. 5/13
CADET® PRO™ ELONGATED TOILET
❑ 215CA.104•FeaturestheCadet® Flushing System•Vitreouschina•HighEfficiencyToilet(HET),ultra-low consumption(4.8Lpf/1.28gpf),utilizes20% lesswater•MeetsEPAWaterSense®criteria•Tradeexclusivetank•PowerWash®rimscrubsbowlwitheachflush•Robustmetaltriplever&metalshankfillvalve•IncludesEZ-InstallToolsw/colormatchbowlcaps•EverClean®surfaceincluded•3"flushvalve•Fully-glazed2-1/8"trapway•12"(305mm)rough-in•Generous9"x8"watersurfacearea•Chromefinishtripleverissupplied•1,000gMaPScore**at1.28gpf•5yearwarranty
❑ 3517C.101ElongatedBowl❑ 4188A.104Tank
Nominal Dimensions: 767x441x733mm(30-1/8"x17-3/8"x28-7/8")
Fixtureonly,seatandsupplysoldseparately
Alternative Tank Configurations Available:❑ 4188A.154TankcompletewithAquaguardLiner❑ 4188A.155TankcompletewithAquaguardLinerandtripleverlocatedonrightside❑ 4188A.164Tankcompletewithtankcoverlockingdevice❑ 4188A.174TankcompletewithAquaguardLinerandtankcoverlockingdevice❑ 4188A.105Tankcompletewithtripleverlocatedonrightside❑ 4188A.165Tankcompletewithtankcoverlockingdeviceandtripleverlocatedonrightside
Compliance Certifications -Meets or Exceeds the Following Specifications:•ASMEA112.19.2-2008/CSAB45.1-08forVitreousChinaFixtures
•USEPAWaterSense®SpecificationforHETs
CADET® PRO™ ELONGATED TOILET
VITREOUS CHINA
To Be Specified:❏Color:❏White❏Bone❏Linen❏Black❏Seat:#5321.110EverClean®ElongatedSeatwith
SlowCloseSnap-OffHinges❏Supplywithstop:
Certified byIAPMO R&T
NOTES:THISTOILETISDESIGNEDTOROUGH-INATAMINIMUMDIMENSIONOF305MM(12")FROMFINISHEDWALLTOC/LOFOUTLET.SUPPLYNOTINCLUDEDWITHFIXTUREANDMUSTBEORDEREDSEPARATELY.*DIMENSIONSHOWNFORLOCATIONOFSUPPLYISSUGGESTED.
IMPORTANT: DimensionsoffixturesarenominalandmayvarywithintherangeoftolerancesestablishedbyANSIStandardA112.19.2.Thesemeasurementsaresubjecttochangeorcancellation.Noresponsibilityisassumedforuseofsupersededorvoidedpages.
1-1/
16"
(27m
m)
3-5/
8" (
92m
m)
SUPPLYAS
REQ'D
C/L OF OUTLET
6"(152mm)
*8"(203mm)
FINISHED WALL
FINISHED FLOOR
C/L OF SEAT POST HOLES140mm (5-1/2" CENTERS)
7-7/16"(189mm)
13-5/8"(347mm)
8-7/8"(226mm)
30-1/8"(767mm)
18-1/2"(470mm)
15"(381mm)
28-7/8"(733mm)
9-5/8"(244mm)
17-3/8"(441mm)
12"(305mm)
14"(356mm)
** Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.
Top Related