8/22/2019 Gambella RRA D8R TTT Technical Compliance
1/16
CLAUSE BY CLAUSE COMMENTARY ON THE TECHNICALSPECIFICATION OF ONE UNIT OF TRACK TYPE TRACTOR
OFFERED TO GAMBELLA RURAL ROADSAUTHORITY.
1.General Requirement Statement of Compliance with Comments
1.1 ScopeIt is the intent of this specification, whetheror not specifically mentioned herein todescribe a diesel engine driven, crawlertractor, equipped with hydraulicallyoperated semi-universal Dozer with singleshank ripper having operating weight ofappr. 36,000 kgs including ROPS- canopy.
The tractor shall be tropicalized anddependable for operating under thecondition specified in the servicerequirement herein and rough as well asdusty and sand terrains.
We offer one unit of Caterpillar model D8R tractype tractor, which is diesel engine driven, anCrawler tractor, equipped with hydraulicaloperated semi-universal (8SU) bulldozer with tcylinder, single shank ripper and ROPS/FOPcanopy having operating weight of 37,875kg.
We offered ROPS Cab and air conditioner aquoted as optional for your decision.
The offered Caterpillar model D8R Track-typTractor is tropicalized and dependable foperating under the service requirement hereand rough as well as dusty and sand terrains.
1.2 Service RequirementThe dozer to be supplied shall be used inconstruction projects in Ethiopia where thefollowing climatic, altitude andtemperature variations experienced.
Climate varies from humid tropics
to arid desert
Temperature varies from 00c to
550c.
Altitude varies from sea level to an
average of 2200 mts.
The offered Caterpillar model D8R track typtractor can be used efficiently on ConstructioProject in Ethiopia where the following siconditions are experienced.
Climate varying from humid tropics to ar
desert.
Temperature varying between 00C to 500C.
Altitude varying from sea level to an average
3800 meters elevation.
1.3 ManufacturingRequirements
1.3.1GeneralAll parts, components, attachments andaccessories not specifically mentioned inthis specification but essential fordependable and efficient operation of theunit shall be furnished by the supplier aspart of this bid and shall be in accordancewith current engineering andmanufacturing practices and according toprevailing trade provisions in general.
All parts, components, attachments anaccessories which are essential for dependable anefficient operation of the offered track type tractwill be furnished in accordance with curreCaterpillar engineering and manufacturinpractices. All components and accessories will bmanufactured in according with current CaterpillaEngineering and manufacturing practices anaccording to prevailing trade provisions in genera
Page 1 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
2/16
1.3.2 MaterialsThe materials of which all parts,attachments, accessories and componentsof the unit bid upon are manufactured and
assembled shall be of the currenttechnology durable and reliable for theintended purpose. The finish shall be ofhigh quality and good workmanship withdependable operation.
The materials of all parts, attachments, accessorieand components of the offered track type tractowill be manufactured and assembled in accordancwith current Caterpillar engineering. They adurable and reliable for the intended purpose antheir finishes are of high quality and goo
workmanship and have dependable operation.
1.4 WarrantyThe supplier of the bidder shall guaranteethat all items included and/or furnishedwith the unit bid upon shall be new,unused, of the most recent or currentmodels and incorporate all recentimprovements in design and materials. Thebidder shall also guarantee to replace freeof charge (transport, labour and otherexpenses incurred thereof) any part ofcomponent that breaks or fail to function inany manner under the service conditionsdescribed herein due to defective orinferior materials or poor workmanshipwithin a period of 12 months or 2000hrswhichever comes last, from the date ofreceipt of the unit at final destination.
We guarantee that all items, parts ancomponents of the offered Track Type Tractor ibrand new, unused and of the most recenmodels/version and recent manufactureincorporate current Caterpillar improvements idesign and materials, are of high quality and usstate of the art workmanship.
We also guarantee to repair or replace free ocharge components or parts that may break or fato function under normal service conditionspecified in your tender due to defective or inferiomaterial or poor workmanship within a period 1months or 2000 hours whichever comes first fromthe date of delivery at final destination.
1.5 Recommended Spare Parts ListThe bidder must furnish the suggested listof recommended spare parts for the first4000 hrs of operation or to the value of15% of order, with price valid for a periodof one year.
Itemized and priced list of recommended spaparts as per your tender requirement is attacheherewith for your reference and decision. The pricof these recommended spare parts will be valid foa period of one year from the date of bid opening,
1.6 Dealership PreferencePreference in making an award will usuallybe given to the equipment manufacturerhaving a well established dealership in
Addis Ababa, and is certified as the soleagent by the manufacturer, i.e, dealershipwith well organized maintenance center,mobile crews that fulfills the followingconditions.
Adequate holding of spare parts for
the equipment in the supply
Well equipped service center and
Ries Engineering S.Co. (RESCO) has been th
dealer in Ethiopia for Caterpillar products since i
establishment in Addis Ababa in 1967 G.C. RESChas well established facilities as well as qualifie
and experienced personnel that enable it provid
full and dependable pre delivery and after sale
support services to its esteemed customers.
Its facilities for the purpose include among others
Page 2 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
3/16
technical personnel, proficientenough to undertake repair andmaintenance service for theequipment
Spare parts warehouse where parts worover Birr 60,000,000 are stocked fCaterpillar machines at any point in time anreplenished regularly trough Caterpillar dealnetwork.
Maintenance workshop with facilities essentifor proper maintenance and overhaul of thoffered machine
Vehicles with radio communication for fieservices
Training center
We also have highly qualified, well traine
technical personnel having long years of hands o
experience on maintaining and servicing th
offered machine. We provide maintenance servic
on site or at our central workshop as deeme
necessary. Periodic preventive maintenanc
services can also be provided on contract basis.
For further details please refer to our faciliti
Brochure, and supporting document enclose
herewith, which confirms same and will also assi
you to compare our capabilities and facilities wit
those of others dealers and/or agents. You are als
welcome to visit our facilities and to verify the fac
on our product support capability for yourself.
We would like also to bring to your attention tha
Ries Engineering S.Co. (RESCO) stocks differe
sized Cat XT hoses in bulk and has set up hos
service facility and it provides hose assemb
services to its customers for hoses up to 2
diameter. When customers have a hose failu
problem it makes a new hose for them by re-fittin
the reusable couplings from the old hose or ne
couplings. You are welcome to make use of th
facility for any machine you have at any time. Th
facility is certified for supping contamination fredependable hoses.
Types of technical staff
The product support department of the compan
that carries out after sales support servic
including parts supply and warranty support
Page 3 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
4/16
staffed as follows for caterpillar products.
One product support manager (Mechanic
Engineer)
One technical service and training manag
(Mechanical Engineer)
Two workshop and field service manage
(Mechanical Engineers)
Three workshop foremen (Technical CollegDiploma)
One technical communicator product proble
management (Mechanical Engineer)
One technical communicator warran
(Mechanical Engineer)
Three field service Engineers (Mechanic
Engineer)
Fifteen field service men, mechanics an
electrician (Technical college diploma) Nineteen workshop technicians, mechanics an
electricians (technical college diploma)
Five apprentice service men (2 mechanic
Engineers and 3 technical college diplomas)
One training officer (Mechanical Engineer)
One assistant trainer (technical colleg
diploma)
Two machine operators trainers
Three welders and painters
Two track press operators
One hose press operator and two assistants Eight support personnel working on ful
computerized service management system
One parts marketing manager(mechanic
Engineer)
One parts operation manager Mechanica
Engineer)
Four parts and service representatives (PSSR
that inspect machines during operatio(Mechanical engineers)
Twenty parts staff including counter an
warehouse
In addition, the sales and marketing departme
has also the following personnel for supporting th
sales and follow up of sold caterpillar machines
the field.
Page 4 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
5/16
One Assistant Managing Director (Mechanic
Engineer)
One Sales and Marketing Director (Mechanic
Engineer)
One Sales Industrial Manager (Mechanic
Engineer) One Product Specialist Manager (Mechanic
Engineer)
Three Sales Engineers (Mechanical Engineers)
Workshop
Area: 1200 m2 new component workshop an
over 2300m2 other workshops equipped wirequired facilities.
Location: Addis Ababa, Sub city Akaki-Kali
Kebele 23, House No. 1044 at Debreziet Road.
Fully equipped workshop facilities for:
Washing and greasing
Hose press for re-fabrication of hydraulic hose
Track press for changing undercarriage an
truck link, rollers, etc.
Hydraulic cylinder disassembly and assemb
bench
Computer controlled Dynamometer test ftesting engine performance
SOS (lubricant analysis laboratory)
Fuel injection pumps test benches
Electrical test benches
Parts and component washing facility
Welding and painting facility
Special and diagnostic tools, which includ
electronic technician tools (ET) and lap tocomputer aided checks and diagnosis.
All essential material handling equipme
including workshop overhead crane and forklif
Field service vehicles equipped with heavy du
tools and communication radio.
Technical special tool room with all speci
diagnostic tools and equipment
Training center with audio visual equipmen
models and library.
Page 5 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
6/16
Types of services delivered
Complete machine overhaul
Periodic maintenance
Breakdown maintenance
Injection pump overhaul and calibration bcomputer controlled test bench
Engine performance test with dynamometer
Welding and painting
Track repair by means of track press
All electrical system maintenance using electr
test bench
Major overhaul of components like engin
transmission, torque converter, etc
Component overhauls
Scheduled Oil Sampling SOS, Lubricant analys
for trend of condition of machine componenfor the purpose of maintenance before failure
Hydraulic cylinder overhaul
Re-fabrication of hydraulic hoses
Mechanics and operators training
Customs track service (CTS) we
measurement on tracks
Technical analysis service (TAS)
Customer support Agreement (CSA) f
maintenance
1.7 Pre-Delivery InspectionThe manufacturer/supplier shall undertake
inspection and servicing of the unit
including washing, greasing, lubrication,
adjustment and calibration to our
satisfaction before delivery of the machine.
We will undertake inspection and servicing of th
unit free of charge at our premises at Addis Abab
or at your site before delivery of the machine. Th
including washing, greasing, lubricatio
adjustment and calibration (if any) to yo
Satisfaction.
We will bear all costs (parts, material, labor etc.) the pre-delivery service.
1.8 Non Compliance with
SpecificationIn the event that the unit bid upon doesnot fully comply with these specifications,the bidder shall state definitely whereinthe unit he proposed to furnish does notcomply, referring to the applicableparagraph of these specifications. When nostatement of the contrary is received, the
We have stated under each paragraph of thtechnical specification comparison documewhether we fully meet your requirements or noHence this technical specification comparisodocument will be binding on us.
Page 6 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
7/16
bidder shall be considered as meeting allthe provision of the specification underthat paragraph and shall be binding to anyclaims that the authority raises.
2 Engine2.1 General
The diesel engine shall perform smoothlyand efficiently under all conditions ofoperation described above and shalldevelop the rated horsepower whenoperating on deferent working condition.
2.2 TypeThe engine shall be four stroke cycles;water cooled; turbocharged with not lessthan six cylinders and should be equippedwith replaceable wet type cylinderssleeves.
2.3 Horse Power
The Cat 3406C engine perform smoothly anefficiently under all conditions of operatiodescribed in the service requirement section abovand develops the rated horsepower according the manufactures current standard when operatinon deferent working condition.
The Cat model 3406C engine is direct injectiofour stroke cycle, water-cooled, turbocharged anafter cooled. The engine has six (6) inline cylindewith replaceable wet type cylinder liners/sleeves.
Page 7 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
8/16
The engine shall deliver min. 300HP SAEJ1349 net, at flywheel at rated RPMequipped cooling fan, air cleaner,alternator, andot her required engineaccessories.
The Caterpillar 3406C engine deliver 303HP net flywheel at 2100 R.P.M under ISO9249 when thengine is equipped with a fan at maximum speeair cleaner, muffler and alternator
2.4 Required Engine DataThe manufacturer shall submit certifiedengine data with his bid showing netpower, torque at governed RPM.
The supplier shall also furnish certifiedaverage fuel consumption per hour whenthe dozer is working under different workmodes (heavy, medium and light).
The engine performance curve showing net powetorque and specific fuel consumption, at governeRPM is attached herewith for your reference ancomparison.
The fuel consumption usually depends on thenvironmental conditions, type of machine, futype and operator skills. The average fuconsumption of the caterpillar model D8R tractype tractor when working under different workinload is as follows:-
Heavy work load ..46 lit/hr
Moderate work load.. 36 lit/hr
Light work load 27 lit/hr2.5 Lubrication SystemEngine lubrication system shall be of a fullforce type oil pump through oil clarificationby a replaceable cartridges shall beprovided
The lubrication system of the 3406C engine is fu
force feed type by gear driven. Oil filtration done by one high efficiency replaceable full flocartridge filter.
The engine lubrication system incorporate
bypass valve to protect sensitive parts of thengine from damage in case of oil filter clogged
2.6 Starting SystemThe engine shall be equipped with heavyduty 24v direct electric starting system.
An electric motor shall start the enginesatisfactorily at temperatures as low as 00cwithout recourse to any auxiliary heatingor starting device, glow plugs, or fluidpriming system.
The offered Caterpillar model D8R track typtractor is equipped with heavy-duty 24volt direelectric system.
The electric starting motor has sufficient crankinpower, which can start the engine satisfactory temperature as low as 0oc without recourse to anauxiliary heating or starting device, glow plugs, ofluid-priming system required.
3 Fuel System
3.1 Fuel tankThe fuel tank or tanks shall be properlyventilated, protected both internally andexternally from corrosion and mustincorporate a baffled sump to collect waterformed by condensation, properlysupported with an underside sheet metalfor protection.
The fuel tank is properly ventilated and protecteboth internally and externally from corrosion. also incorporates a baffled sump to collect wateformed by condensation and properly supportewith an underside sheet metal for protection.
Page 8 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
9/16
3.2 Injection PumpThe injection pump shall be mechanicallydrive with current technology governcontrolled driven with all necessaryregulatory and controlling attachments.
3.3 InjectionInjectors shall be accessible,interchangeable and readily removable.
3.4 Fuel filterThe fuel filters shall be dual with water andsediment trap and shall be accessible,replaceable and readily removable forquick maintenance.
3.5 Water SeparatorA water separator shall be installed in
diesel supply system to prevent the waterfrom going to the fuel system. It shall alsoretain rust, metal and dirty particles.
The Caterpillar 3406C engine fuel injection pump mechanically driven scroll type direct injectiopump equipped with all necessary regulatory ancontrolling devices.
All the injectors are adjustment free, easaccessible, interchangeable and readily removable
The fuel system has dual filters in series with watand sediment trap which are accessible and readiremovable for quick maintenance.
A water separator is also installed in diesel fusupply system to separate water and fuel an
prevent dirt from going to fuel system. It alsretains rust, metal & dirt particles.
4 Cooling SystemThe cooling system shall be tropicalized,closed, pressurized, pump forced typewater medium with ample capacity topermit continuous full load operation of theengine without boiling of the coolant underthe conditions specified in the servicerequirement herein. The cooling system
shall incorporate an efficient tropicalizedthermostat.
4.1 RadiatorThe radiator shall be tropicalized of theheavy duty construction, properly mountedto withstand shocks and strains likely to beencountered in operation.
The radiator shall have adequate capacityand flow area, plus a compensation for thealtitudes and temperatures in Ethiopia.
The radiator shall be easily removable andaccessible for maintenance.
The cooling system is tropicalized, closepressurized pump forced type water medium anhas ample capacity to permit continuous full loaoperation of the engine without boiling of thcoolant under the conditions specified in thservice requirement section of the tender. ThCooling System incorporates an efficietropicalzed thermostat for prompt warming of thcoolant during cold start.
The radiator is a tropicallized heavy-duconstruction property mounted on the front of thmachine frame to with stand shocks and strainlikely to be encountered in operation.
The radiator has 92 liters refill capacity which adequate flow areas and equipped with altitude pressure compensator & temperatures in Ethiopia
The cooling system is an Advanced ModulCooling System (AMOCS) and multi-row/core typwhich utilizes an exclusive two pass cooling surfacarea to provide significantly more cooling capacithan conventional system. Each core module of thradiator is easily removable and accessibindividually for cleaning and maintenance, so it ca
Page 9 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
10/16
save considerable cost and repair time.4.2 Cooling Fan
The cooling system shall be fitted withadequate size direct drive cooling fanblowing away from the engine in forwarddirection to the radiator.
The cooling system has an adequate size diredrive cooling fan and blowing away air from thengine in the forward direction.
5 Air CleanerHeavy duty of a two stage dry type aircleaner preferably fitted with a pre-cleanerwith restriction gauge/indicator of amplecapacity shall be furnished. The air cleanershall be well protected from externaldamage and strong enough to with standshock and impact.
Heavy duty, two stages dry type air cleaner thcomprises primary and secondary filtration elemefitted with a pre-cleaner for superior cleaninService/restriction gauge indicator of ampcapacity furnished with the offered machine. Thair cleaner IS well protected from external damagand strong enough to with stand shock and impac
6 Electrical SystemThe electrical system shall be composed ofbut not limited to complete 24v electricstarting, charging and lighting systems,electric switches and two keys. All wiringshall be enclosed in non metallic loom.
The electric system is composed of 24V direelectric starting system, charging alternatobatteries and lights and protection devices. Thelectrical system incorporates electric switches antwo key systems-i.e. battery disconnect anstarting. All wiring is enclosed in a non-metalloom and the system is protected by fuses againshort circuit.
6.1 Alternator
The alternator shall be heavy duty; fanventilated with electronic voltage regulatorand shall be of adequate capacity toprovide service under operating conditions.Approximate rated capcity of alternatorshall be 24v/50Amp.
The alternator is heavy-duty, fan ventilated with aelectronic voltage regulator provided within thsystem. The alternator has an adequate capacity provide service under normal operating condition
The alternator has rated capacity of 24v/75Amp.
6.2 BatteriesThe batteries shall be maintenance free,heavy duty of ample power to start theengine when cold at sufficient speed down
to ambient temperature of 00c .
The offered caterpillar model D8R Track typtractors are equipped with Caterpillar heavy dutmaintenance free batteries of ample power to sta
the engine when cold at sufficient speed down ambient temperature of 00C.
The batteries are four 4 x 6volt connected in serieand parallel and each battery has 750 cocranking amps (CCA)and 100Apm at 20 hourating.
6.3 Battery MountingThe batteries shall be mounted at a The batteries are mounted at a convenient place
Page 10 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
11/16
convenient place in a metal box providedwith hold down device and shall be locatedso as to provide easy access for servicing.Proper cushion shall be provided forbattery seat.
metal box with hold down device and are locateso as to provide easy access for servicing. Propecushions are provided for battery seat.
7, SteeringThe steering system shall be a differentialsteering design, which deliversuninterrupted power to both track, andturns the machine by speeding up onetrack and slowing the other. It shall allowthe operator to steer and change directionseasily.
The offered Caterpillar model D8R Track TypTractor is equipped with differential steerinsystem which delivers uninterrupted power to bottrack, and turns the machine by speeding up ontrack and slowing the other. It also allows thoperator to steer and change directions easily.
8.TransmissionFull power shift, with minimum three
forward and three reverse speeds, havinga top speed of at least 10km/hr capable ofinstantaneous shifting under full load in allgears and directions.
The offered Caterpillar model D8R Track TypTractor is equipped with a planetary type, fu
power shift transmission with single stage torquconverter. The transmission has three speeforward and three speed reverse .The maximuforward speed and reverse speeds are 10.8km/and 13.9km/hr respectively.
The transmission is capable of instantaneoushifting under full load in all gears and directioFurthermore, special modulation systeincorporated in the transmission hydraulic systethat permits fast speed and direction changes.
9.BrakesThe manufacturer current standard isacceptable.
The offered Caterpillar Model D8R track typtractor is equipped with oil cooled, hydraulicalactuated, multi-disk brake designed service brakoperated by a single pedal that simultaneousapplies brakes to both tracks for fast stops.
The parking brake is spring applied hydraureleased by transmission lock lever.
10. UndercarriageThe track frame shall be ruggedly
constructed to resist shock loads andpermit oscillation between tracks. Allcomponents sealed against entry ofabrasives and foreign material to give longservice life, with minimum maintenance.
Track rollers, carrier rollers and idlers shallbe life time lubricated. Track chains to be
The track frame is ruggedly constructed to resishock loads and permit oscillation between trackAll components are sealed to avoid entry abrasive and foreign material and to give lonservice life with minimum maintenance.
Track rollers and idlers are life time lubricatetype. The track chains are provided with hydrauladjusters.
Page 11 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
12/16
provided with hydraulic adjusters.
Each track shall be equipped withminimum 560mm width grouser shoesmade of heat treated steel.
The track shoe is 610mm width extreme servicgrouser shoes made of heat treated steel.
11. DozingEquipment
The semi-u blade dozer shall behydraulically operated with push-pull armsand tilting arrangement. It shall be made ofhigh grade heavy duty arc welded boxframed steel construction suitable for usewith the track tractor specified herein.
The weight of the semi-u blade dozer with
hydraulic control unit shall not be less than4500kg and capacity shall not be less than8.5m3.
The offered Caterpillar model D8R Track TypTractor is equipped with semi universal tilt typdozer blade (8SU).
The dozing blade is hydraulically operated wipush-pull arms & tilting arrangement & it is madof high grade, heavy-duty arc welded box framesteel construction suitable for use with the tractractor specified herein.
The weight of the semi-universal dozer witho
hydraulic control is 4570Kg and blade capacity the semi universal blade is 8.7m3.
11.1 Moldboard Dimension
Width, minimum ..3900mm
Height, minimum..1600mm
Hydraulic tilt,minimum.900mm
Digging depth, minimum.500mm
Ground clearance, minimum 1200mm
Moldboard Dimension
Width..3937 mm
Height.....1690mm
Maximum tilt.951mm
Digging depth.....582 mm
Ground clearance.1231 mm
11.2 Cutting EdgeCutting edge shall be of the reversible typewith separate heavy duty end bits. Cuttingedge and end bits shall be bolted on to themoldboard with counter sunk head bolts.
The Cutting edges are reversible type and separaheavy duty end-bits. Cutting edges and end biare bolted on to the mould board with counter sunhead bolts.
12. RipperThe rear-mounted ripper shall be a single-shank of adjustable parallelogram design,actuated hydraulically from the operatorseat.
The offered track type tractor is equipped wi
adjustable parallelogram single-shank ripp
actuated hydraulically from the operator seat.
Page 12 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
13/16
13.Hydraulic SystemThe hydraulic system shall consist ofseparate pumping sections for steering,transmission, dozing equipment, ripperoperation, equipped with adequate
capacity of tank, filters, strainers andvalves.
The offered Caterpillar model D8R track typ
tractor is equipped with separate hydraulic pump
section for steering, transmission, for hydrau
implements, and ripper operation with adequa
capacity of tank, lines and return filters, straineand valves.
13.1 Hydraulic Pressure HosesThe hose shall consist of a seamless oil
resistant synthetic rubber tube, one braid
or high tensile steel wire and a weather oil
resistant rubber cover with hydraulic hose
fittings at either end.
The hydraulic hoses are CAT XT hoses wi
reusable coupling, and meet the critical flexibili
and strength demand requirements. These hos
are high temperature and oil resistant type and a
reinforced by high tensile steel wire braid and a
covered (protected) from external damage
wherever they are exposed to danger.
14. Operators SeatUpholstered cushioned seat with arm restsplaced for good visibility of the operatorand for efficient operation of the machineis required.
A comfortable suspension seat with adjustable fo& aft and arm rests are fitted on the unit fgreater operator comfort, good visibility of thoperator and for efficient operation of the machine
15. CabThe dozer shall be equipped with ROPSCanopy. Bidders shall quote for enclosedROPS Cab and air conditioner as optional.
The offered Caterpillar model D8R track typtractor is equipped with ROPS/FOPS canopy.
We offered fully enclosed ROPS cab and a
conditioner as an optional for your decision.16. Controls
All operating controls shall be easilyaccessible to normal sized operator andshall not require an exorbitant amount ofeffort for activities.
The operator workstation is equipped wiergonomic control placement and convenieadjustments, low lever and pedal effort, that areasily accessible to a normal size operator and dnot require exorbitant amount of effort factivities.
17. InstrumentsThe following instruments shall be requiredbut not be limited to:
Ammeter
Fuel level gauge
Oil pressure gauge indicator
Water, temperature indicator,
Hour meter.
The offered Caterpillar model D8R Track TypTractor instrument panel consists of a
Electronic Monitoring System (EMS), gaugeand indicators for monitoring critical machinfunctions.Gauges
Engine coolant temperature
Hydraulic oil temperature
Power train oil temperature
Page 13 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
14/16
Fuel level
Electric Hour/service meter
EMS control and alert indicators formonitoring
Coolant/water temperature Engine oil pressure
Transmission oil temperature
Transmission oil filter
Alternator
Hydraulic oil filter
Air cleaner service indicator
18. Additional essentialaccessories required:
1. Power train guard2. Heavy duty muffler with rainprotection3. Front and rear work lights
4. Back up alarm5. Electric horn6. Multipurpose fire extinguisher
The offered Caterpillar model D8R Track typtractor comprises the followings:-
1. Power train guard2. Vertical heavy-duty muffler with rain cup3. Four front (2 cylinder & 2 Canopy mounte
& Two Rear work lights.4. Back up alarm5. Electric horn6. Multipurpose fire extinguisher
19. ColorThe tractor and all accessories shall bepainted highway color.
The offered Caterpillar model D8R track typtractor will be painted with Caterpillar standa
Yellow colour.20.Manuals
One copy of each of the following shall besupplied with the machine
a) Operators manualb) Spare parts catalogc) Shop/repair manual
Descriptive CoverageManuals shall cover the equipment itselfand all the components, attachments &accessories thereof. Advertising literatures
will not be acceptable in lieu of thesemanuals.
General Language RequirementAll manuals, charts, drawings andmanufactures specifications literatureincluded with the bid offer are required to
One copies of the following manual will be suppliewith the machine
a) Operators manualb) Spare parts cataloguec) Shop/ repair manual
The manuals that will be supplied with thmachines give all essential details and cover thmain equipment itself, all the component
attachments and accessories thereof.
All manuals, charts, drawings and manufacturerspecification literature to be supplied in Englislanguage. They will be correctly worded so that n
Page 14 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
15/16
be in English and correctly worded so thatno misinterpretation of manufacturesspecification terms or intent is possible inanalyzing the bid.
misinterpretation of manufacturers specificatiodoes not occur.
21.ToolsSet of ordinary and special tools withlubrication gun shall be supplied with themachine. Tools to be supplied should belisted.
One set of standard tool kit including grease gun wbe provided with the machine. The list of such toois attached herewith for your reference.
22. Proven PerformanceThe track type tractor offered shall becurrent standard model of production,Which is substantially the same and insuccessful use for not less than one year or2000 working hours.
The offered Caterpillar model D8R Track typ
tractor is current standard model in productio
which will be manufactured on placement of orde
This model has been in successful use for lon
years all over the world including Ethiopia and ha
a proven performance.
We attached herewith list of customers in thSALES REFERENCE Section, who purchase througdealership net work and own D8R Track typtractors for your reference.
23. Field Kits of SpareParts1. 2 each sets of all required belts.2. 12 each sets of engine oil filter
elements.3. 12 each sets of all hydraulic and
transmission oil filter elements.4. 2 each sets of all hydraulic ram
seals, packing and gaskets.5. 5 each sets of air cleaner
elements.6. 2 each sets of end bits and
cutting edges with bolts.7. 10 each sets of engine fuel filter
elements.8. 2 each sets of all hydraulic hoses.
9. 2 each sets of all cooling hoses.10.1 each set of all electric fuses
and bulbs.11.1 each sets of water pump repair
kit.12.1 each radiator cap and fuel tank
cap.13.1 each set of turbocharger repair
Itemized and priced list of field kits of spare paras per your tender requirement which is applicabfor the offered Caterpillar model track type tractor attached herewith for your reference and decision
Page 15 of16
8/22/2019 Gambella RRA D8R TTT Technical Compliance
16/16
kit.14.2 each sets of track master-link
bolts
Page 16 of16
Top Related