Energy Chain Systems®
PMAProtective Corrugated Tubing
HosesConnectors
System SupportsAccessories
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
PMA Protective Corrugated Tubing
11.2
Tubes, connectors, system supports, and accessories
Wide selection of
tubes and systems
igus® Energy Chain® Series 22combined with PMAFLEX protectivetubing and igus Chainflex® CF9
Advantages of PMA
• Wide range of tubes• Long service life of the tubes
especially through millions ofreverse bending cycles
• UL-approved products• Outstanding tear-out resistance of
the connections• PMAFIX safety locking system
PMA™ protective hoses can be used in applications
requiring flexible protection for electrical wires and
cables. They also provide outstanding protection for
cables within Energy Chain Systems®. Simple
applications include general mechanical and
automotive engineering systems. Advanced
applications include chemical plant technology with
temperatures ranging between -200°F and 482°F, to
robots that undergo several million cycles at high
speeds. PMA protective tubes are subjected to
extensive testing including resistance to impact,
reverse bending fatigue, peak load, heat aging, cold
wind, self-extinguishing, and tear out resistance.
Wide selection of Tubes, connectors and accessories
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
PMA Protective Corrugated Tubing
11.3
PMA-CO-FIX TN / PMA-CO-FIX TN
PMA-CO-FIX TN: two-piece connector
PMA-CO-FIX GTN: two-piece locking nut
PMA-CO-FIX BFH: Nylon System Support
Part No. Di B A SW Thread Suitable for PMA-CO-FIX in. (mm) in. (mm) in. (mm) in. (mm) PMA-CO-
FLEX NW
I-BTNO-P0910 .04 (09) .47 (12) 1.10 (28) .75 (19) 9 10I-BTNO-P1314 .51 (13) .67 (17) 1.38 (35) .94 (24) 13.5 14I-BTNO-P2120 .79 (20) .67 (17) 1.34 (34) 1.26 (32) 21 20I-BTNO-P2923 .94 (24) .83 (21) 1.65 (42) 1.61 (41) 29 23I-BTNO-P2937 1.22 (31) .87 (22) 1.97 (50) 1.97 (50) 29 37
Part No. C SW Thread Suitable for PMA-CO-FIX in. (mm) in. (mm) PG PMA-CO-
FIX TN
I-BGTN-P0910 .43 (11) .87 (22) 9 I-BTNO-P0910I-BGTN-P1314 .55 (14) 1.18 (30) 13.5 I-BTNO-P1314I-BGTN-P2120 .55 (14) 1.42 (36) 21 I-BTNO-P2120I-BGTN-P2923 .67 (17) 1.81 (46) 29 I-BTNO-P2923I-BGTN-P2937 .67 (17) 2.17 (55) 29 I-BTNO-P2937
Part No. NW A B H M Fits PMA-CO-FIX mm in. (mm) in. (mm) in. (mm) to PMA
Co-FLEXI-BFH-09 10 (19) .79 (20) .91 (23) M5 10I-BFH-01 14 .94 (24) .79 (20) 1.06 (27) M5 14I-BFH-20 20 1.38 (35) .79 (20) 1.57 (40) M6 20I-BFH-23 23 1.69 (43) .79 (20) 1.77 (45) M6 23I-BFH-37 37 2.05 (52) .79 (20) 2.05 (52) M6 37
Order example:
I-PACO-14BColor black (B)
Width
Series
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
PMA Protective Corrugated Tubing
11.4
PACO: split, flexible tubing
Temperature range:-22°F to 212°F (-30 °C to +100 °C), or a shorttime up to 266°F (+130°C)Material:PA6, modified, halogen-freeResistant to:Drilling, cutting machine apparatus, hydraulicand lubricating oils, emulsifying agents, electricaldischarge machining fluids, solvents and fuels,
general oils up to 212°F (+100 °C)Applications:Automotive industry, mechanical engineering,electrical industry
Part No. Ø d1 Ø d2 R (stat.) NW Suitable (Black) in (mm) in (mm) in (mm) for PG
I-PACO-10B .35 (8.9) .54 (13.6) 2.17 (55) 10 09I-PACO-14B .51 (12.9) .74 (18.7) 2.95 (75) 14 13.5I-PACO-20B .78 (19.8) 1.02 (25.9) 4.13 (105) 20 21I-PACO-23B .93 (23.7) 1.23 (31.3) 4.92 (125) 23 29.5I-PACO-37B 1.25 (31.7) 1.65 (41.9) 6.69 (170) 37 29I-PACO-45B 1.70 (43.1) 2.13 (54.2) 6.69 (170) 45
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
Order example:
I-PAST-17S/BColor black (B)
or grey (S)
Width
Profile standard (T)or broad (G)
Series
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
PMA Protective Corrugated Tubing
11.5
PAS: medium wall, very flexible
Temperature range:-40°F to 221°F (-40 °C to +105 °C), for a shorttime up to 302°F (+150°C)Material:PA6, modifiedFire behavior according to UL:27, halogen-free, V2 (V0 ) self-extinguishingResistant to:Drilling, cutting machine apparatus, hydraulicand lubricating oils, emulsifying agents, electricaldischarge machining fluids, solvents and fuels,
general oils up to 212°F (+100 °C)Applications:general mechanical engineering
Profile: T
Profile: G
Part No. Ø d1 Ø d2 R (stat.) NW Profile Suitable for PMAFIXin. (mm) in. (mm) in. (mm) mm PG NPT
I-PAST-07B .24 (6.2) .39 (10.0) 59 (15) 07 T 7I-PAST-10B .38 (9.6) .51 (13.0) 79 (20) 10 T 9I-PAST-12B .47 (12.0) .62 (15.8) 1.18 (30) 12 T 11 1/2”I-PAST-17B .64 (16.2) .83 (21.2) 1.57 (40) 17 T 16 1/2”I-PAST-23B .89 (22.6) 1.12 (28.5) 1.77 (45) 23 T 21 3/4”I-PAST-29B 1.14 (29.0) 1.34 (34.5) 2.16 (55) 29 T 29 1”I-PAST-36B 1.44 (36.5) 1.67 (42.5) 2.36 (60) 36 T 36 1 1/4”I-PAST-48B 1.87 (47.5) 2.15 (54.5) 2.85 (70) 48 T 48 1 1/2”I-PASG-17B .60 (15.3) .83 (21.2) 1.57 (40) 17 G 16 1/2”I-PASG-23B .86 (21.9) 1.12 (28.5) 1.77 (45) 23 G 21 3/4“I-PASG-29B 1.09 (27.6) 1.36 (34.5) 2.16 (55) 29 G 29 1“I-PASG-36B 1.42 (36.0) 1.67 (42.5) 2.36 (60) 36 G 36 1 1/4“I-PASG-48B 1.85 (47.0) 2.15 (54.5) 2.76 (70) 48 G 48 1 1/2“I-PASG-56B 2.22 (56.3) 2.65 (67.2) 5.12 (130) 56 G PMAGRIPI-PASG-70B 2.66 (67.5) 3.15 (80.0) 6.30 (160) 70 G PMAGRIPI-PASG-95B 3.60 (91.5) 4.17 (106.0) 8.27 (210) 95 G PMAGRIPI-PASG-125B 4.98 (126.5) 5.77(146.5) 17.71 (450) 125 G PMAGRIP
UV-stabilized protective hoses are available at short notice, please consult igus® for delivery details.
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
PMA Protective Corrugated Tubing
11.6
PIS/PIH: medium wall, highly flexible (PIH very heavy wall)
Temperature range:-40°F to 212°F (-50 °C to +85 °C), for a shorttime up to 302°F (+150°C)Material:PA12, modifiedFire behavior sccording to UL:27, halogen-free, V2 (VO) self-extinguishingResistant to:Drilling, cutting machine apparatus, hydraulicand lubricating oils, emulsifying agents, electricaldischarge machining fluids, solvents and fuels,
general oils up to 212°F (+100 °C)Applications:especially suitable for robots> 4 Mio. reversed bends
Part No. Ø d1 Ø d2 R R NW Profile Suitable for(stat.) (dyn.) PMAFIX
in (mm) in (mm) in (mm) in (mm) PG NPTI-PIST-07B .24 (6.2) .39 (10.0) .59 (15) 1.57 (40) 07 T 7I-PIST-10B .38 (9.6) .51 (13.0) .79 (20) 1.97 (50) 10 T 9I-PIST-12B .47 (11.9) .62 (15.8) .98 (25) 2.56 (65) 12 T 11 1/2”I-PIST-17B .65 (16.4) .83 (21.1) 1.18 (30) 2.56 (65) 17 T 16 1/2”I-PIST-23B .89 (22.6) 1.12 (28.4) 1.38 (35) 3.54 (90) 23 T 21 3/4”I-PIST-29B 1.14 (29.0) 1.35 (34.3) 1.77 (45) 4.33 (110) 29 T 29 1”I-PIST-36B 1.44 (36.5) 1.67 (42.5) 2.36 (60) 6.50 (165) 36 T 36 1 1/4”I-PIST-48B 1.87 (47.5) 2.15 (54.5) 2.85 (70) 7.09 (180) 48 T 48 1 1/2”I-PISG-17B .60 (15.2) .83 (21.1) 1.18 (30) 3.15 (80) 17 G 16 1/2”I-PISG-23B .85 (21.7) 1.12 (28.4) 1.57 (40) 3.94 (100) 23 G 21 3/4“I-PISG-29B 1.08 (27.4) 1.35 (34.3) 1.97 (50) 4.72 (120) 29 G 29 1“I-PISG-36B 1.41 (35.8) 1.67 (42.3) 2.36 (60) 7.09 (180) 36 G 36 1 1/4“I-PISG-48B 1.83 (46.7) 2.13 (54.2) 2.85 (70) 7.87 (200) 48 G 48 1 1/2“I-PIHG-56B 2.21 (56.3) 2.65 (67.2) 4.33 (110) 10.63 (270) 56 G PMAGRIPI-PIHG-70B 2.65 (67.2) 3.13 (79.6) 5.91 (150) 13.78 (350) 70 G PMAGRIPI-PIHG-95B 3.59 (91.3) 4.17 (106.0) 6.69 (170) 17.71 (450) 95 G PMAGRIPI-PIHG-125B 4.98 (126.5) 5.77 (146.5) 13.78 (350) 22.83 (580) 125 G PMAGRIP
Order example
I-PIST-17B
Color black (B)
Width
Profile standard (T)or broad (G)
Series
Profile: T
Profile: G
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
PMA Protective Corrugated Tubing
11.7
VOH: heavy wall, flexible (NW 70, 95, 125 = very heavy wall)
Temperature range:-40°F to 221°F (-40 °C to +105 °C), for a shorttime up to 302°F (+150°C)Material:PA6, modifiedFire behavior sccording to UL:27, halogen-free, V2 (VO) self-extinguishingResistant to:Drilling, cutting machine apparatus, hydraulicand lubricating oils, emulsifying agents, electricaldischarge machining fluids, solvents and fuels,
general oils up to 212°F (+100 °C)Applications:Heavy mechanical engineering, rail vehiclesCharacteristics:USA export, UL-recognized, File E 80294,+221°F, 600V, NW 7-95
Order example:
I-VOH D-17B
Color black (B)
Width
Profile standard (T)
or broad (G)
Series
Profile: T
Profile: G
Part No. Ø d1 Ø d2 R (stat.) NW Profile Suitable for in. (mm) in. (mm) in. (mm) mm PMAFIX
PG NPTI-VOHD-07B .22 (5.5) .39 (10.0) .79 (20) 07 T 7I-VOHD-10B .35 (9.0) .51 (13.0) .98 (25) 10 T 9I-VOHD-12B .46 (11.6) .62(15.8) 1.18 (30) 12 T 11 1/2”I-VOHG-17B .57 (14.5) .83 (21.0) 1.57 (40) 17 G 16 1/2”I-VOHG-23B .83 (21.1) 1.12 (28.5) 1.97 (50) 23 G 21 3/4“I-VOHG-29B 1.05 (26.6) 1.36 (34.5) 2.36 (60) 29 G 29 1“I-VOHG-36B 1.38 (35.0) 1.67 (42.5) 2.75 (70) 36 G 36 11/4“I-VOHG-48B 1.83 (46.5) 2.14 (54.5) 3.15 (80) 48 G 48 11/2“I-VOHG-70B 2.64 (67.0) 3.15 (80.0) 7.87 (200) 70 G PMAGRIPI-VOHG-95B 3.56 (90.5) 4.17 (106.0) 11.81 (300) 95 G PMAGRIPI-VOHG-125B 4.96 (126.0) 5.77 (146.5) 18.90 (480) 125 G PMAGRIP
UV-stabilized protective hoses are available at short notice, please consult igus® for delivery details.
PMA ConnectorsIn
tern
et:
htt
p:/
/ww
w.ig
us.
com
emai
l: sa
les@
igu
s.co
mQ
uic
kSp
ec:
htt
p:/
/ww
w.ig
us.
com
/qs/
ech
ain
.asp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.8
PMAFIX: Connectors, tables and codes
Table 3
Protection PMA CodeSelf-sealing IP 66 DWith sealing gasket, on tube, reinforced IP67 VWith seal cap on conduit and flat gasket for thread IP68
Table 2: Thread Codes
Thread PMA CodeMetal tube thread PMetric thread MMetric fine-pitch thread FNPT thread (USA) NGas-tube thread (Italiy) GUNEF circular plugs U
Table 1: PMAFLEX / PMAFIX codesPMAFLEX PMA PMAFIX PMA
Width Code Thread PG Code07 m PG-07 P0710 0 PG-09 P0912 2 PG-11 P11
PG-13.5 P1317 7 PG-16 P1623 3 PG-21 P2129 9 PG-29 P2936 6 PG-36 P3648 8 PG-48 P48
I-BVND-P167GT Connectors with external thread
Profile PMAFLEX: GT=Universal Safety Clip
Width PMAFLEX Tube: 17 (see Table 1)
Thread size
Thread coding: P (see Table 2)
D = without seal IP 66 (see Table 3)
PMA-version: N = straight, W = 90° angle, A = 45° angle
PMAFIX-patented lock: V = reinforced
Color: B = black,
I-BVOD-P167GT 90° angle with flange
Profile PMAFLEX: GT=Universal Safety Clip
Width PMAFLEX Tube: 17 (see Table 1)
Thread size
Thread coding: P (see Table 2)
D = without seal IP 66 (see Table 3)
PMA-Version: O = 90° angle with flange
PMAFIX-patented lock: V = reinforced
Color: B = black
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
PMAFIX: Connectors
Assembly examples IP 65 - IP 67
Tube and mounting bracket for degree
of protection IP 65 or IP 67. One-piece
fittings are also available - please
consult igus®.
11.9
1. Attaching seal caps
2. Attaching the mounting bracket
3. Attaching the retaining clip
PMAFIX FN: connectors, straight, with PG external thread
Connectors for IP 54, IP 65 and IP 67 protection,
as well as for other threads, are available with
short lead times. Please consult igus® for delivery
details.
Profile: T G
g
in. (mm)
Ø D max.
in. (mm)
L
in. (mm)
SW
in. (mm)
Thread
PG
Suitablefor
PMA-FLEXNW
ProfilePart No.
I-BVND-P07MGT .43 (11) .65 (16.5) 1.36 (34.5) .59 (15) 07 07 G/TI-BVND-P090GT .43 (11) .79 (20) 1.44 (36.5) .67 (17) 09 10 G/TI-BVND-P112GT .43 (11) .93 (23.5) 1.54 (39) .79 (20) 11 12 G/TI-BVND-P167GT .43 (11) 1.16 (29.5) 1.87 (47.5) 1.02 (26) 16 17 G/TI-BVND-P213GT .47 (12) 1.46 (37) 1.97 (50) 1.26 (32) 21 23 G/TI-BVND-P299GT .47 (12) 1.73 (44) 2.01 (51) 1.50 (38) 29 29 G/TI-BVND-P366GT .51 (13) 2.11 (53.5) 2.62 (66.5) 1.97 (50) 36 36 G/TI-BVND-P488GT .51 (13) 2.60 (66) 2.52 (64) 2.56 (65) 48 48 G/T
Order example:
I-BVND-P167GT
GT=Universal Safety Clip
Width PMAFLEX tube (Coding see Table 1)
Thread size
Thread type (See Table 2, Page 10.8)
Degree of protection (See Table 3, Page 10.8)
PMA-version: N = straight, W = 90° angle, A = 45° angle
PMAFIX-patented lock standard (F) or reinforced (V)
Color black (B)
PMA Connectors
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
PMA Connectors
PMAFIX FW: connectors, 90° angle, with PG external thread
Profile: T G
g
in. (mm)
Ø D
in. (mm)
A
in. (mm)
B
in. (mm)
Thread
PG
Suitablefor
PMA-FLEXNW
ProfilePart No.
I-BVWD-P07MGT .43 (11) .65 (16.5) 1.26 (32) 1.44 (36.5) 07 07 G/TI-BVWD-P090GT .43 (11) .79 (20) 1.34 (34) 1.56 (39.5) 09 10 G/TI-BVWD-P112GT .43 (11) .93 (23.5) 1.52 (38.5) 1.81 (46) 11 12 G/TI-BVWD-P167GT .43 (11) 1.16 (29.5) 1.71 (43.5) 2.30 (58.5) 16 17 G/TI-BVWD-P213GT .43 (11) 1.46 (37) 2.13 (54) 2.64 (67) 21 23 G/TI-BVWD-P299GT .47 (12) 1.73 (44) 3.21 (61.5) 293 (74.5) 29 29 G/TI-BVWD-P366GT .51 (13) 2.11 (53.5) 2.83 (72) 3.86 (98) 36 36 G/TI-BVWD-P488GT .51 (13) 2.60 (66) 3.37 (85.5) 4.37 (111) 48 48 G/T
GT=Universal Safety Clip
Width PMAFLEX tube (Coding see Table 1)
Thread size
Thread type (See Table 2, Page 10.8)
Degree of protection (See Table 3, Page 10.8)
PMA Version straight (N), 90° angle (W), 45° angle (A)
PMAFIX-patented lock standard (F) or reinforced (V)
Color black (B)
Order example
I-BVWD-P167GT
11.10
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.11
PMA Connectors
PMAFIX VO: connectors, 90° angle, with flange
Profile: T G
Connectors for IP 68 protection are available
with short lead times. Please consult igus® for
delivery details.
I-BVOD-P167GT 1.14 (29) 1.97 (50) 1.77 (45) .87 (22) 1.42 (36) 1.34 (34) 2xM5 .77 (19.5) 17 G/TI-BVOD-P213GT 1.46 (37) 2.76 (70) 2.48 (63) 1.22 (31) 2.09 (53) 1.65 (42) 2xM6 .93 (23.5) 23 G/TI-BVOD-P299GT 1.69 (43) 3.07 (78) 2.64 (67) .83 (21) 1.42 (36) 2.13 (54) 1.89 (48) 4xM6 1.04 (26.5) 29 G/TI-BVOD-P366GT 2.09 (53) 4.01 (102) 3.35 (85) 1.14 (29) 1.18 (30) 2.87 (73) 2.52 (64) 4xM6 1.48 (37.5) 36 G/TI-BVOD-P488GT 2.56 (65) 4.69 (119) 3.39 (86) 1.69 (43) 1.18 (30) 2.87 (73) 2.99 (76) 4xM6 1.71 (43.5) 48 G/T
Part No. Ø D
in. (mm)
L
in. (mm)
C
in. (mm)
G
in. (mm)
E
in. (mm)
F
in. (mm)
H
in. (mm)
M T
in. (mm)
Suitablefor
PMA-FLEXNW
Profile
Order example:
I-BVOO-P167T
Profile standard (T) or broad (G)
Width PMAFLEX tube (Coding see Table 1)
Size definition of the fittings:
P16=NW17, P21=NW23, P29=NW29, P36=NW36, P48=NW48
Degree of Protection D=IP 50, V=IP 68
PMA Version O= 90° angle with flange
PMAFIX-patented lock ,reinforced (V)
Color black (B)
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.12
PMA Accessories
PMACLIP FH: system supports(with optional clip for additional safety)
I-BFH-07 BFH-07-020 BFH-07-000 .39 (10) .59 (15) .79 (20) .71 (18) 1 x M4 07I-BFH-09 BFH-09-020 BFH-09-000 .51 (13) .75 (19) .79 (20) .91 (23) 1 x M5 10I-BFH-11 BFH-11-020 BFH-11-000 .63 (16) .87 (22) .79 (20) 1.02 (26) 1 x M5 12I-BFH-16 BVH-16-020 BVH-16-000 .83 (21) 1.10 (28) .79 (20) 1.30 (33) 1 x M6 17I-BFH-21 BVH-23-020 BVH-23-000 1.14 (29) 1.38 35) .79 (20) 1.57 (40) 1 x M6 23I-BFH-29 BVH-29-020 BVH-29-000 1.38 (35) 1.69 (43) .79 (20) 1.77 (45) 1 x M6 29I-BFH-36 BVH-36-020 BVH-36-000 1.61 (41) 2.05 (52) .79 (20) 2.09 (53) 1 x M6 36I-BFH-48 BVH-48-020 BVH-48-000 2.20 (55) 2.60 (66) .79 (20) 2.60 (66) 1 x M6 48
Order No.SupportOnly
Order No.Locking Clip
Order No.Complete
Ø Din. (mm)
Ain. (mm)
Bin. (mm)
Hin. (mm)
M Suitable forPMAFLEX
NW
PMACLIP system supports for PMA-CO-FLEX are available with short lead times.Please consult igus® for delivery details. Thesystem supports can also be pushed directlyinto certain profile rails for space-savingfastening.
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.13
PMA Accessories
Tube clamp
Part No. Ain. (mm)
Bin. (mm)
Ø Din. (mm)
Mmm
Suitable forPMAFLEX
NW
I-SGB-07 .98 (25) .51 (13) .35 (9) 1xM4 07I-SGB-09 1.02 (26) .51 (13) .47 (12) 1xM4 10I-SGB-11 1.22 (31) .51 (13) .55 (14) 1xM4 12I-SGB-16 1.57 (40) .67 (17) .79 (20) 1xM5 17I-SGB-21 1.97 (50) .67 (17) 1.02 (26) 1xM5 23I-SGB-29 2.56 (65) .83 (21) 1.26 (32) 1xM6 29I-SGB-36 2.76 (70) .83 (21) 1.57 (40) 1xM6 36I-SGB-48 3.43 (87) .83 (21) 2.05 (52) 1xM6 48
These tube clamps used for mountingconduits, are produced from galvanizedsteel according to DIN 3016. The steel-bandis covered by a halogen-free elastomer, andhas very good weather and aging resistance.
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.14
PMA Accessories
NVN3: sealing cap
By using sealing caps on the end of the tube in
conjunction with SVN4 flat gaskets, it is possible
to convert standard connectors to the IP68 degree
of protection.
Temperature range:
-22°F to 221°F (-30°C to +105°C)
Material:
Polyester elastomer, oil-resistant
SVN4: flat gasket
By using the flat gasket on the threaded
connector in conjunction with NVN3 sealing
caps, it is possible to convert standard
connectors to the IP68 degree of protection.
Temperature range:
-49°F to 392°F (-45°C to +200°C)
Material:
Asbestos-free sealing material
Part No. IP 68 Suitable for PMAFLEX NW
I-NVN3-07 07I-NVN3-09 10I-NVN3-11 12I-NVN3-16 17
Part No. IP 68 Suitable for PMAFLEX NW
I-NVN3-21 23I-NVN3-29 29I-NVN3-36 36I-NVN3-48 48
I-SVN4-07 07I-SVN4-09 09I-SVN4-11 11I-SVN4-13 13.5I-SVN4-16 16
Part No. IP 68 Suitable for PMAFIX PG
I-SVN4-21 21I-SVN4-29 29I-SVN4-36 36I-SVN4-48 48
Part No. IP 68 Suitable for PMAFIX PG
Visit “PMA Helper” at www.igus.com and it will automatically helpyou choose which connectors to use with which tubing
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.15
PMA Accessories
GMN/GMM: Hexagon locking nut
The hexagon locking nut is used to
additionally secure the connectors in
place.
Material:
Typ I-BMN Polyamid (black)
Typ I-GMN Polyamid (light grey)
Typ I-GMM Brass, nickel-plated
Part No.Polyamid (black)
Part No.Polyamid (lt. grey)
Part No.Brass
Suitable for PMAFiXPG Inch
I-BMN-07 I-GMN-07 I-GMM-07 07I-BMN-09 I-GMN-09 I-GMM-09 09I-BMN-11 I-GMN-11 I-GMM-11 11I-BMN-13 I-GMN-13 I-GMM-13 13.5I-BMN-16 I-GMN-16 I-GMM-16 16I-BMN-21 I-GMN-21 I-GMM-21 21I-BMN-29 I-GMN-29 I-GMM-29 29I-BMN-36 I-GMN-36 I-GMM-36 36I-BMN-48 I-GMN-48 I-GMM-48 48I-BMN-GO0 1/4”I-BMN-GO1 3/8”I-BMN-GO2 1/2”I-BMN-GO3 3/4”
SV04: sealing ring
By using the sealing rings on the flangedconnector, it is possible to convert thestandard connectors to the IP 68 degree ofprotection.
Temperature range:
-22°F to 221°F (-30 °C to +105°C)
Material:
Nitril
I-SVO4-16 I-BVOD-P167GTI-SVO4-21 I-BVOD-P213GTI-SVO4-29 I-BVOD-P299GT
Part No. IP 65 Suitable for PMAFIX B/SVO
I-SVO4-36 I-BVOD-P366GTI-SVO4-48 I-BVOD-P488GT
Part No. IP 65 Suitable for PMAFIX B/SVO
PMAFLEX™PMAGRIP™ - Jumbo
ORDER NO. ORDER NO.NW Black Grey
56 I-PIHG-56B I-PIHG-56S70 I-PIHG-70B I-PIHG-70S95 I-PIHG-95B I-PIHG-95S
125 I-PIHG-125B I-PIHG-125B
56 ON REQUEST I-VOHG-56S70 I-VOHG-70B I-VOHG-70S95 I-VOHG-95B I-VOHG-95S
125 I-VOHG-125B I-VOHG-125S
56 I-PASG-56B ON REQUEST70 I-PASG-70B I-PASG-70S95 I-PASG-95B I-PASG-95S
125 I-PASG-125B I-PASG-125S
56 I-CYLG-56B I- CYLG-56S70 I-CYLG-70B I-CYLG-70S95 I-CYLG-95B I-CYLG-95S
125 ON REQUEST ON REQUEST
BGG/SGGNW Black Grey
56 I-BGG-56 I-SGG-5670 I-BGG-70 I-SGG-7095 I-BGG-95 I-SGG-95
125 I-BGG-125 I-SGG-125
BGO/SGONW Black Grey
70 I-BGO-70 I-SGO-7095 I-BGO-95 I-SGO-95
SGSNW
36 I-SGS-3648 I-SGS-4856 I-SGS-5670 I-SGS-7095 I-SGS-95
125 I-SGS-125
SG03 at protecting conduitNW
56 I-SG03-5670 I-SG03-7095 I-SG03-95
125 I-SG03-125
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.16
PMAGRIP™BGG/SGGStraight
PMAGRIP™BGO/SGO90°
Tube Clamp SGS, Gal-vanized steel, withelastomer profile
Seal RingsSGO3/SGO4
BGG2SGG2
BGG1SGG1
SG03
PMAFLEX™PMAGRIP™ - Jumbo
ID OD R m
(56.3) 2.22 (67.2) 2.65 (110) 4.33 30(67.2) 2.65 (79.6) 3.13 (150) 5.91 30/10(91.3) 3.59 (106.0) 4.17 (170) 6.69 30/10
(126.5) 4.98 (146.5) 5.77 (350) 13.78 20
(55.5) 2.19 (67.2) 2.65 (135) 5.31 10(67.0) 2.64 (80.0) 3.15 (200) 7.87 10(90.5) 3.56 (106.0) 4.17 (300) 11.81 10
(126.5) 4.96 (146.5) 5.77 (480) 18.90 6
(56.3) 2.22 (67.2) 2.65 (110) 4.33 30(67.5) 2.66 (80.0) 3.15 (160) 6.30 10(91.5) 3.60 (106.0) 4.17 (210) 8.27 10
(126.5) 4.98 (146.5) 5.77 (450) 17.72 6
(56.5) 2.22 (67.2) 2.65 (110) 4.33 30(68.0) 2.68 (80.0) 3.15 (160) 6.30 10(91.5) 3.62 (106.0) 4.17 (210) 8.27 10
(126.9) 5.00 (146.5) 5.77 (450) 17.72 6
BGG/SGGA B H E F ød M
(80) 3.15 (98) 3.86 (39) 1.54 (60) 2.36 (66) 2.60 • 4 x M6(95) 3.74 (112) 4.41 (43) 1.69 (60) 2.36 (80) 3.15 • 4 x M6
(125) 4.92 (146) 5.75 (50) 1.96 (74) 2.91 (108) 4.25 • 4 x M6(192) 7.56 (192) 7.92 (76) 2.99 • • • 6 x M6
BGO/SGOA B H E F L M
(96) 3.78 (112) 4.41 (107) 4.21 (60) 2.36 (80) 3.15 (132) 5.17 4 x M6(125) 4.92 (146) 5.75 (142) 5.59 (74) 2.91 (108) 4.25 (173) 6.81 4 x M6
SGSA B H E M
(80) 3.15 (19) .75 (48) 1.89 (65) 2.56 2 x M6(94) 3.70 (19) .75 (58) 2.28 (78) 3.07 2 x M6
(118) 4.65 (24) .94 (72) 2.83 (98) 3.86 2 x M8(130) 5.17 (24) .94 (85) 3.35 (110) 4.33 2 x M8(156) 6.14 (24) .94 (110) 4.33 (136) 5.35 2 x M8(200) 7.87 (24) .94 (152) 5.98 (180) 7.09 2 x M8
SG04
SG04-56SG04-70SG04-95SG04125
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.17
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.18
Product Range
Available combinations of PMAFLEX™ and PMAFIX™ with standard IP50/IP65 degree of protection
PMAFLEX™ Ød1 Ød2 PMAFIX™ PMAFIX™ Seal cap Flat gasket PMAFIX™ NW Profile Type mm mm Model FN Model FW Short at thread Distributors
Inner Outer straight 90° Model FV
PAS Standard07 T PAST-07B 6.2 10.0 BFN*-P07mT BFW*-P07mT NFN3-07 SFN4-07 –10 T PAST-10B 9.6 13.0 BFN*-P090T BFW*-P090T NFN3-09 SFN4-09 BFV*-0709T 12 T PAST-12B 12.0 15.8 BFN*-P112T BFW*-P112T NFN3-11 SFN4-11 BFV*-0911T 17 T PAST-17B 16.2 21.2 BFN*-P167T/G BFW*-P167T/G NFN3-16 SFN4-16 BFV*-1116T/G 23 G PASG-23B 21.9 28.5 BFN*-P213T/G BFW*-P213T/G NFN3-21 SFN4-21 BFV*-1621T/G 29 G PASG-29B 27.6 34.5 BFN*-P299T/G BFW*-P299T/G NFN3-29 SFN4-29 –36 G PASG-36B 36.0 42.5 BFN*-P366G BFW*-P366G NFN3-36 SFN4-36 –48 G PASG-48B 47.0 54.0 BFN*-P488G BFW*-P488G NFN3-48 SFN4-48 –
PIS Robot07 T PIST-07B 6.2 10.0 BFN*-P07mT BFW*-P07mT NFN3-07 SFN4-07 –10 T PIST-10B 9.6 13.0 BFN*-P090T BFW*-P090T NFN3-09 SFN4-09 BFV*-0709T 12 T PIST-12B 11.9 15.8 BFN*-P112T BFW*-P112T NFN3-11 SFN4-11 BFV*-0911T 17 T PIST-17B 16.4 21.1 BFN*-P167G BFW*-P167G NFN3-16 SFN4-16 BFV*-1116T/G 23 G PISG-23G 21.7 28.4 BFN*-P213T/G BFW*-P213T/G NFN3-21 SFN4-21 BFV*-1621T/G 29 G PISG-29B 27.4 34.3 BFN*-P299T/G BFW*-P299T/G NFN3-29 SFN4-29 –36 G PISG-36B 35.8 42.3 BFN*-P366G BFW*-P366G NFN3-36 SFN4-36 –48 G PISG-48B 46.7 54.2 BFN*-P488G BFW*-P488G NFN3-48 SFN4-48 –
VOH UL-Recognized07 T VOHD-07B 5.8 10.0 BFN*-P07mT BFW*-P07mT NFN3-07 SFN4-07 –10 T VOHD-10B 9.0 13.0 BFN*-P090T BFW*-P090T NFN3-09 SFN4-09 BFV*-0709T 12 T VOHD-12B 11.6 15.8 BFN*-P112T BFW*-P112T NFN3-11 SFN4-11 BFV*-0911T 17 T VOHD-17B 14.5 21.1 BFN*-P167G BFW*-P167G NFN3-16 SFN4-16 BFV*-1116T/G 23 G VOHG-23G 21.1 28.5 BFN*-P213T/G BFW*-P213T/G NFN3-21 SFN4-21 BFV*-1621T/G 29 G VOHG-29B 26.6 34.5 BFN*-P299T/G BFW*-P299T/G NFN3-29 SFN4-29 –36 G VOHG-36B 35.0 42.5 BFN*-P366G BFW*-P366G NFN3-36 SFN4-36 –48 G VOHG-48B 46.5 54.5 BFN*-P488G BFW*-P488G NFN3-48 SFN4-48 –
CYL07 T CYLT-07B 6.2 10.0 BFN*-P070T BFW*-P07mT NFN3-07 SFN4-07 –10 T CYLT-10B 9.6 13.0 BFN*-P090T BFW*-P090T NFN3-09 SFN4-09 BFV*-0709T 12 T CYLT-12B 12.0 15.8 BFN*-P112T BFW*-P112T NFN3-11 SFN4-11 BFV*-0911T 17 T CYLT-17B 16.2 21.2 BFN*-P167T BFW*-P167T NFN3-16 SFN4-16 BFV*-1116T/G 23 G CYLG-23G 21.9 28.5 BFN*-P213G BFW*-P213G NFN3-21 SFN4-21 BFV*-1621T/G 29 G CYLG-29B 27.6 34.5 BFN*-P299G BFW*-P299G NFN3-29 SFN4-29 –36 G CYLG-36B 36.0 42.5 BFN*-P366G BFW*-P366G NFN3-36 SFN4-36 –48 G CYLG-48B 47.0 54.5 BFN*-P488G BFW*-P488G NFN3-48 SFN4-48 –
70 JUMBO1 70B BGG-70 BGO-70 SG03-70 SG04-70 –95 JUMBO1 95B BGG-95 BGO-95 SG03-95 SG04-95 –125 JUMBO1 125B BGG-125 – SG03-125 SG04-125
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.19
Product Range
Available combinations for PMAFLEX™ and PMAFIX™ for reinforced IP50/IP67 degree of protection
PMAFIX™ PMAFIX™ PMAFIX™ PMAFIX™ PMAFIX™ PMAFIX™Distributors Distributor Model Fl Model Fl Model Fl Model FlModel FT Model VY fits Burndy fits AMP Transparent
M NW
– – BFIO-P07mT BFIOB-U13mT BFIOA-U15mT 8x1 07 TFIO-F08mT– BVYO-100707T BFIO-P090T BFIOB-U130T BFIOA-U180T 12x1 07 TFIO-F12mT– BVYO-121010T BFIO-P112T BFIOB-U202T BFIOA-U232T 18x1 07 TFIO-F18mTBFT*-1616T/G BVYO-171212T/G BFIO-P167T/G BFIOB-U237T/G BFIOA-U237T/G 30x1.5 07 TFIO-F30mTBFT*-2129T/G BVYO-231717T/G BFIO-P213T/G BFIOB-U293T/G – 12x1 10 TFIO-F120TBFT*-2929T/G BVYO-292323T/G BFIO-P299T/G BFIOB-U359T/G – 18x1 10 TFIO-F180T– BVYO-362929T/G BFIO-P366G – – 30x1.5 10 TFIO-F300T– BVYO-483636G BFIO-P488G – – –
– – BFIO-P07mT BFIOB-U13mT BFIOA-U15mT 8x1 07 TF O-F08mT– BVYO-100707T BFIO-P090T BFIOB-U130T BFIOA-U180T 12x1 07 TFIO-F12mT– BVYO-12101OT BFIO-P112T BFIOB-U202T BFIOA-U232T 18x1 07 TFIO-F18mTBFT*-1616T/G BVYO-171212T/G BFIO-P167T/G BFIOB-U237T/G BFIOA-U237T/G 30x1.5 07 TFIO-F30mTBFT*-2129T/G BVYO-231717T/G BFIO-P213T/G BFIOB-U293T/G – 12x1 10 TFIO-F120TBFT*-2929T/G BVYO-292323T/G BFIO-P299T/G BFIOB-U359T/G – 18x1 10 TFIO-F180T– BVYO-362929T/G BFIO-P366G – – 30x1.5 10 TFIO-F300T– BVYO-483636G BFIO-P488G – – –
– – BFIO-P07mT BFIOB-U13mT BFIOA-U15mT 8x1 07 TFIO-F08mT– BVYO-100707T BFIO-P090T BFIOB-U130T BFIOA-U180T 12x1 07 TFIO-F12mT– BVYO-121010T BFIO-P112T BFIOB-U202T BFIOA-U232T 18x1 07 TFIO-F18mTBFT*-1616G BVYO-171212T/G BFIO-P167G BFIOB-U237G BFIOA-U237G 30x1.5 07 TFIO-F30mTBFT*-2129T/G BVYO-231717T/G BFIO-P213T/G BFIOB-U293T/G – 12x1 10 TFIO-F120TBFT*-2929T/G BVYO-292323T/G BFIO-P299T/G BFIOB-U359T/G – 18x1 10 TFIO-F180T– BVYO-362929T/G BFIO-P366G – – 30x1.5 10 TFIO-F300T– BVYO-483636G BFIO-P488G – – –
– – BFIO-P07mT BFIOB-U13mT BFIOA-U15mT 8x1 07 TFIO-F08mT– BVYO-100707T BFIO-P090T BFIOB-U130T BFIOA-U180T 12x1 07 TFIO-F12mT– BVYO-121010T BFIO-P112T BFIOB-U202T BFIOA-U232T 18x1 07 TFIO-F18mTBFT*-1616T/G BVYO-171212T/G BFIO-P167T/G BFIOB-U237T/G BFIOA-U237T/G 30x1.5 07 TFIO-F30mTBFT*-2129T/G BVYO-231717T/G BFIO-P213T/G BFIOB-U293T/G – 12x1 10 TFIO-F120TBFT*-2929T/G BVYO-292323T/G BFIO-P299T/G BFIOB-U359T/G – 18x1 10 TFIO-F180T– BVYO-362929T/G BFIO-P366G – – 30x1.5 10 TFIO-F300T– BVYO-483636G BFIO-P488G – – –
– – – – – –– – – – – –– – – – – –
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.20
PMAFLEX™ Ød1 Ød2 PMAFIX™ PMAFIX™ PMAFIX™NW Profile Type mm mm Model VN Model VA Model VW
Inner Outer straight 45° 90°
PAS Standard07 T PAST-07B 6.2 10.0 – – –10 T PAST-10B 9.6 13.0 BVN*-P090T BVA*-P090T BVW*-P090T12 T PAST-12B 12.0 15.8 BVN*-P112T BVA*-P112T BVW*-P112T17 T PAST-17B 16.2 21.2 BVN*-P167T/G BVA*-P167T/G BVW*-P167T/G23 G PASG-23B 21.9 28.5 BVN*-P213T/G BVA*-P213T/G BVW*-P213T/G29 G PASG-29B 27.6 34.5 BVN*-P299T/G BVA*-P299T/G BVW*-P299T/G36 G PASG-36B 36.0 42.5 BVN*-P366G BVA*-P366G BVW*-P366G48 G PASG-48B 47.0 54.0 BVN*-P488G BVA*-P488G BVW*-P488G
PIS Robot07 T PIST-07B 6.2 10.0 – – –10 T PIST-10B 9.6 13.0 BVN*-P090T BVA*-P090T BVW*-P090T12 T PIST-12B 11.9 15.8 BVN*-P112T BVA*-P112T BVW*-P112T17 T PIST-17B 16.4 21.1 BVN*-P167T/G BVA*-P167T/G BVW*-P167T/G23 G PISG-23G 21.7 28.4 BVN*-P213T/G BVA*-P213T/G BVW*-P213T/G29 G PISG-29B 27.4 34.3 BVN*-P299T/G BVA*-P299T/G BVW*-P299T/G36 G PISG-36B 35.8 42.3 BVN*-P366G BVA*-P366G BVW*-P366G48 G PISG-48B 46.7 54.2 BVN*-P488G BVA*-P488G BVW*-P488G
VOH UL-Recognized07 T VOHD-07B 5.8 10.0 – – –10 T VOHD-10B 9.0 13.0 BVN*-P090T BVA*-P090T BVW*-P090T12 T VOHD-12B 11.6 15.8 BVN*-P112T BVA*-P112T BVW*-P112T17 T VOHD-17B 14.5 21.1 BVN*-P167G BVA*-P167G BVW*-167G23 G VOHG-23G 21.1 28.5 BVN*-P213T/G BVA*-P213T/G BVW*-P213T/G29 G VOHG-29B 26.6 34.5 BVN*-P299T/G BVA*-P299T/G BVW*-P299T/G36 G VOHG-36B 35.0 42.5 BVN*-P366G BVA*-P366G BVW*-P366G48 G VOHG-48B 46.5 54.5 BVN*-P488G BVA*-P488G BVW*-P488G
CYL07 T CYLT-07B 6.2 10.0 – – –10 T CYLT-10B 9.6 13.0 BVN*-P090T BVA*-P090T BVW*-P090T12 T CYLT-12B 12.0 15.8 BVN*-P112T BVA*-P112T BVW*-P112T17 T CYLT-17B 16.2 21.2 BVN*-P167T BVA*-P167T BVW*-P167T/G23 G CYLG-23G 21.9 28.5 BVN*-P213G BVA*-P213G BVW*-P213T/G29 G CYLG-29B 27.6 34.5 BVN*-P299G BVA*-P299G BVW*-P299T/G36 G CYLG-36B 36.0 42.5 BVN*-P366G BVA*-P366G BVW*-P366G48 G CYLG-48B 47.0 54.5 BVN*-P488G BVA*-P488G BVW*-P488G
70 JUMBO1 70B – –95 JUMBO1 95B – –125 JUMBO1 125B – –
Product Range
Available combinations for PMAFLEX™ and PMAFIX™ for reinforced/metal thread IP50/IP67 degree of protection
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.21
PMAFIX™ Seal cap Flat gasket PMAFIX™ Seal ringNautic with cable long at thread Model VO to BVOstrain relief 90°
– – – – –BVNZ-P090T NVN3-09 SVN4-09 – –BVNZ-P112T NVN3-11 SVN4-11 – –BVNZ-P167T/G NVN3-16 SVN4-16 BVO*-P167T/G SF04-16BVNZ-P213T/G NVN3-21 SVN4-21 BVO*-P213T/G SF04-21BVNZ-P299T/G NVN3-29 SVN4-29 BVO*-P299T/G SF04-29BVNZ-P366G NVN3-36 SVN4-36 BVO*-P366G SF04-36BVNZ-P488G NVN3-48 SVN4-48 BVO*-P488G SF04-48
– – – – –BVNZ-P090T NVN3-09 SVN4-09 – –BVNZ-P112T NVN3-11 SVN4-11 – –BVNZ-P167T/G NVN3-16 SVN4-16 BVO*-P167T/G SF04-16BVNZ-P213T/G NVN3-21 SVN4-21 BVO*-P213T/G SF04-21BVNZ-P299T/G NVN3-29 SVN4-29 BVO*-P299T/G SF04-29BVNZ-P366G NVN3-36 SVN4-36 BVO*-P366G SF04-36BVNZ-P488G NVN3-48 SVN4-48 BVO*-P488G SF04-48
– – – – –BVNZ-P090T NVN3-09 SVN4-09 – –BVNZ-P112T NVN3-11 SVN4-11 – –BVNZ-P167G NVN3-16 SVN4-16 BVO*-P167G SF04-16BVNZ-P213T/G NVN3-21 SVN4-21 BVO*-P213T/G SF04-21BVNZ-P299T/G NVN3-29 SVN4-29 BVO*-P299T/G SF04-29BVNZ-P366G NVN3-36 SVN4-36 BVO*-P366G SF04-36BVNZ-P488GZ NVN3-48 SVN4-18 BVO' P48SG SF04-18
– – – – –BVNZ-P090T NVN3-09 SVN4-09 – –BVNZ-P112T NVN3-11 SVN4-11 – –BVNZ-P167T NVN3-16 SVN4-16 BVO*-P167T SF04-16BVNZ-P213G NVN3-21 SVN4-21 BVO*-P213G SF04-21BVNZ-P299G NVN3-29 SVN4-29 BVO*-P299G SF04-29BVNZ-P366G NVN3-36 SVN4-36 BVO*-P366G SF04-36BVNZ-P488G NVN3-48 SVN4-48 BVO*-P488G SF04-48
– – – – –– – – – –– – – – –
Product Range
Available combinations forPMAFLEX™ and PMAFIX™
Available combinations for PMAJACK
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.22
Product Range
PMAFLEX™ Ød1 Ød2 PMAFIX™ PMAFIX™ PMAFIX™ Seal cap Flat gasketNW Profile Type mm mm Model VN Model VA Model VW long at thread
Inner Outer Straight 45° 90°
PAS Standard07 T PAST-07B 6.2 10.0 – – – – –10 T PAST-10B 9.6 13.0 NVN*-P090T NVA*-P090T NVW*-P090T NVN3-09 SVN4-0912 T PAST-12B 12.0 15.8 NVN*-P112T NVA*-P112T NVW*-P112T NVN3-11 SVN4-1117 T PAST-17B 16.2 21.2 NVN*-P167T/G NVA*-P167T/G NVW*-P167T/G NVN3-16 SVN4-1623 G PASG-23B 21.9 28.5 NVN*-P213T/G NVA*-P213T/G NVW*-P213T/G NVN3-21 SVN4-2129 G PASG-29B 27.6 34.5 NVN*-P299T/G NVA*-P299T/G NVW*-P299T/G NVN3-29 SVN4-2936 G PASG-36B 36.0 42.5 NVN*-P366G NVA*-P366G NVW*-P366G NVN3-36 SVN4-3648 G PASG-48B 47.0 54.0 NVN*-P488G NVA*-P488G NVW*-P488G NVN3-48 SVN4-48
PIS Robot07 T PIST-07B 6.2 10.0 – – – – –10 T PIST-10B 9.6 13.0 NVN*-P090T NVA*-P090T NVW*-P090T NVN3-09 SVN4-0912 T PIST-12B 11.9 15.8 NVN*-P112T NVA*-P112T NVW*-P112T NVN3-11 SVN4-1117 T PIST-17B 16.4 21.1 NVN*-P167T/G NVA*-P167T/G NVW*-P167T/G NVN3-16 SVN4-1623 G PISG-23G 21.7 28.4 NVN*-P213T/G NVA*-P213T/G NVW*-P213T/G NVN3-21 SVN4-2129 G PISG-29B 27.4 34.3 NVN*-P299T/G NVA*-P299T/G NVW*-P299T/G NVN3-29 SVN4-2936 G PISG-36B 35.8 42.3 NVN*-P366G NVA*-P366G NVW*-P366G NVN3-36 SVN4-3648 G PISG-48B 46.7 54.2 NVN*-P488G NVA*-P488G NVW*-P488G NVN3-48 SVN4-48
VOH UL-Recognized07 T VOHD-07B 5.8 10.0 – – – – –10 T VOHD-10B 9.0 13.0 NVN*-P09OT NVA*-P090T NVW*-P090T NVN3-09 SVN4-0912 T VOHD-12B 11.6 15.8 NVN*-P112T NVA*-P112T NVW*-P112T NVN3-11 SVN4-1117 T VOHD-17B 14.5 21.1 NVN*-P167G NVA*-P167G NVW*-P167G NVN3-16 SVN4-1623 G VOHG-23G 21.1 28.5 NVN*-P213T/G NVA*-P213T/G NVW*-P213T/G NVN3-21 SVN4-2129 G VOHG-29B 26.6 34.5 NVN*-P299T/G NVA*-P299T/G NVW*-P299T/G NVN3-29 SVN4-2936 G VOHG-36B 35.0 42.5 NVN*-P366G NVA*-P366G NVW*-P366G NVN3-36 SVN4-3648 G VOHG-48B 46.5 54.5 NVN*-P48SG NVA*-P488G NVW*-P488G NVN3-48 SVN4-18
CYL07 T CYLT-07B 6.2 10.0 – – – – –10 T CYLT-10B 9.6 13.0 NVN*- P09OT NVA*-P090T NVW*-P090T NVN3-09 SVN4-0912 T CYLT-12B 12.0 15.8 NVN*-P112T NVA*-P112T NVW*-P112T NVN3-11 SVN4-1117 T CYLT-17B 16.2 21.2 NVN*-P167T NVA*-P167T NVW*-P167T NVN3-16 SVN4-1623 G CYLG-23G 21.9 28.5 NVN*-P213G NVA*-P213G NVW*-P213G NVN3-21 SVN4-2129 G CYLG-29B 27.6 34.5 NVN*-P299G NVA*-P299G NVW*-P299G NVN3-29 SVN4-2936 G CYLG-36B 36.0 42.5 NVN*-P366G NVA*-P366G NVW*-P366G NVN3-36 SVN4-3648 G CYLG-48B 47.0 54.5 NVN*-P488G NVA*-P488G NVW*-P488G NVN3-48 SVN4-48
70 JUMBO1 70B – – – – –95 JUMBO1 95B – – – – –125 JUMBO1 125B – – – – –
Metal
Metal
Metal
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
System support System support Securing clip Pipe Hexagon nutModel FH Model VH for Model VH+FH clamp GMN GMMSupport Only Complete Set Clip Only Polyamid Metal
BFH-07 – BFH-07-020 SGB-07 GMN-07 GMM-07BFH-09 – BFH-09-020 SGB-09 GMN-09 GMM-09BFH-11 – BFH-11-020 SBG-11 GMN-11 GMM-11BFH-16 BVH-17-000 BVH-17-020 SGB-16 GMN-16 GMM-16BFH-21 BVH-23-000 BVH-23-020 SGB-21 GMN-21 GMM-21BFH-29 BVH-29-000 BVH-29-020 SGB-29 GMN-29 GMM-29BFH-36 BVH-36-000 BVH-36-020 SGB-36 GMN-36 GMM-36BFH-48 BVH-48-000 BVH-48-020 SGB-48 GMN-48 GMM-48
BFH-07 – – SGB-07 GMN-07 GMM-07BFH-09 – – SGB-09 GMN-09 GMM-09BFH-11 – – SBG-11 GMN-11 GMM-11BFH-16 BVH-17-000 BVH-17-020 SGB-16 GMN-16 GMM-16BFH-21 BVH-23-000 BVH-23-020 SGB-21 GMN-21 GMM-21BFH-29 BVH-29-000 BVH-29-020 SGB-29 GMN-29 GMM-29BFH-36 BVH-36-000 BVH-36-020 SGB-36 GMN-36 GMM-36BFH-48 BVH-48-000 BVH-48-020 SGB-48 GMN-48 GMM-48
BFH-07 – – SGB-07 GMN-07 GMM-07BFH-09 – – SGB-09 GMN-09 GMM-09BFH-11 – – SBG-11 GMN-11 GMM-11BFH-16 BVH-17-000 BVH-17-020 SGB-16 GMN-16 GMM-16BFH-21 BVH-23-000 BVH-23-020 SGB-21 GMN-21 GMM-21BFH-29 BVH-29-000 BVH-29-020 SGB-29 GMN-29 GMM-29BFH-36 BVH-36-000 BVH-36-020 SGB-36 GMN-36 GMM-36BFH-48 BVH-48-000 BVH-48-020 SGB-48 GMN-48 GMM-48
BFH-07 – SGB-07 GMN-07 GMM-07BFH-09 – – SGB-09 GMN-09 GMM-09BFH-11 – – SBG-11 GMN-11 GMM-11BFH-16 BVH-17-000 BVH-17-020 SGB-16 GMN-16 GMM-16BFH-21 BVH-23-000 BVH-23-020 SGB-21 GMN-21 GMM-21BFH-29 BVH-29-000 BVH-29-020 SGB-29 GMN-29 GMM-29BFH-36 BVH-36-000 BVH-36-020 SGB-36 GMN-36 GMM-36BFH-48 BVH-48-000 BVH-48-020 SGB-48 GMN-48 GMM-48
– – – SGS-70 – –– – – SGS-95 – –– – – SGS-125 – –
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
PM
A P
rote
ctiv
eC
orr
ug
ated
Tu
bin
g
11.23
Product Range
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
Inte
rnet
: h
ttp
://w
ww
.igu
s.co
mem
ail:
sale
s@ig
us.
com
Qu
ickS
pec
: h
ttp
://w
ww
.igu
s.co
m/q
s/ec
hai
n.a
sp
Tele
ph
on
e1-
800-
521-
2747
Fax
1-
401-
438-
7270
igu
s®E
ner
gy
Ch
ain
Sys
tem
®
11.24
Product Range
*O = without sealing set*S = with sealing set
All the parts are also available in grey (S)1 = available PASG, PIHG, VOHG (70/95), CYLGProfile: T = standard, G = broad
PMAJACKPMAJACKBraids TerminationsNW Type SRER round
SREV square
F.PX Polyolefin03 F.PX.03gr –04 F.PX.04gr –06 F.PX.06gr SRER-0608 F.PX.08gr SRER-0610 F.PX.10gr –12 F.PX.12gr SRER-1616 F.PX.16gr SRER-1620 F.PX.20gr SRER-16/2125 F.PX.25gr SRER-2130 F.PX.30gr SRER-21/2940 F.PX.40gr SRER-29
F.66 Polyamide03 F.66.03* –04 F.66.04* –06 F.66.06* SRER-0608 F.66.08* SRER-0610 F.66.10* –12 F.66.12* SRER-1616 F.66.16* SRER-1620 F.66.20* SRER-16/2125 F.66.25* SRER-2130 F.66.33* SRER-21/2940 F.66.40* SRER-2950 F.66.50* SRER-50/SREV-4070 F.66.70* –
F.CK Copper03 F.CK.03 –04 F.CK.04 –05 F.CK.05 –06 F.CK.06 –10 F.CK.10 –12 F.CK.12 –15 F.CK.15 –20 F.CK.20 –25 F.CK.25 –30 F.CK.30 –35 F.CK.35 –
Top Related