PMA Cable Protection PMA EMC System / PMA EMV System · Metal Braids Metall-Geflechte EMCFIX System...
Transcript of PMA Cable Protection PMA EMC System / PMA EMV System · Metal Braids Metall-Geflechte EMCFIX System...
PMA EMC-SYSTEMCable Protection System with integrated electro-magnetic shielding
PMA EMV-SYSTEMKabelschutzsystem mit integrierter
elektromagnetischer Abschirmung
August 2010
CABLE PROTECTIONKABELSCHUTZTECHNIK
IntroductionEinführung
EMCFIX System / EMVFIX System
Screening EffectivenessSchirmwirkung
Transfer Impedance/Transferimpedanz
The EMCFIX series covers connectors for optimum
connecting solutions for screened cables or screening
braids. In combination with metal braids of the EMC
product line, control and signal cables are shielded
from external disturbances. Disturbance influences as
electro magnetic fields and electrical impulses are
conducted via the screening braids and the EMCFIXconnectors to the housing.
EMCFIX connectors are made of nylon and nickle-
plated aluminium or brass and extend the classic
cable protection system of connector and conduit
with the screening component. The quick and simple
installation of the PMA system will not be affected by
these additional components. The 360° clamping
feature of the braids guarantees high safety, e.g. for
short-circuit currents. High screening effect and low
coupling resistance characterise the system. The con-
nectors offer excellent screening values to follow the
EU guidelines.
If PMA products are used in conjunction with non
PMA products, all product liability claims will be
rejected.
Die EMVFIX Serie umfasst Armaturen für optimale
Anschlusslösungen bei Einsatz von abgeschirmten
Leitungen bzw. Abschirmgeflechten. Mit Hilfe der
Metallgeflechte der EMV Linie können Kontroll- und
Signalkabel gegen externe Störungen abgeschirmt
werden. Störeinflüsse wie elektromagnetische Felder
und elektrische Impulse werden von der Leitungs-
abschirmung über die EMVFIX Anschlüsse auf das
Gehäuse abgeleitet.
EMVFIX Anschlussarmaturen werden aus Kunststoff
und Aluminium oder Messing vernickelt hergestellt und
erweitern das klassische Kabelschutzsystem aus
Anschluss und Schutzrohr um die Abschirmungskom-
ponente. Der Vorteil der schnellen und einfachen
Montage des PMA Systems bleibt dabei erhalten.
Zusätzlich gewährt ein 360° klemmender Abgriff des
Metallgeflechtes eine hohe Sicherheit z.B. auch bei
Kurzschlüssen. Hohe Schirmdämpfung und niedriger
Kupplungswiderstand zeichnen das System aus. Die An-
schlussarmaturen bieten ausgezeichnete Abschir-
mungswerte im Sinne der EU-Richtlinien.
Jegliche Produktehaftung bezüglich der Systemeigen-
schaften erlischt, wenn das PMA System mit Fremd-
produkten kombiniert wird.
Screening Effectiveness of PMA Screening Braid
(typical values).
Schirmwirkung von PMA-Abschirmgeflechten
(typische Werte).
Transfer impedance between housing PMA-EMCFIXin conjunction with PMA screening braid (typical
values).
Transferimpedanz zwischen Gehäuse PMA-EMVFIXund PMA-Geflecht (typische Werte).
Metal BraidsMetall-Geflechte
EMCFIX System / EMVFIX System
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 1
• Temperature range: – 45 °C to +105°C; Short-term to 150°C• Coverage: > 90%• Typical screening values: 65 – 75 dB at 100 MHz• System belonging to: EMCFIX
• Temperaturbereich: – 45°C bis +105°C; kurzzeitig bis 150°C• Bedeckungsgrad: > 90%• Typische Schirmwerte: 65 – 75 dB bei 100 MHz• Systemzugehörigkeit: EMVFIX
F.CK Screening BraidThis braid is made of fine tin-plated copper and is supplied on a tube former. The tube former prevents a fold up of thebraid and considerably simplifies processing and installation. The product is used in machine and railway construction where high shielding values for electro magnetic fields are required.
Das Geflecht wird aus feinen verzinnten Kupferlitzen geflochten und auf einem formgebenden Trägerschlauch ausgeliefert. Der Trägerschlauch verhindert ein Zusammenfaltendes Geflechtes und erleichtert die Verarbeitung und Installation erheblich. Das Produkt wird im Maschinen- und Schienen-fahrzeugbau dort eingesetzt, wo hochwertige Abschirmwerte für elektromagnetische Felder verlangt sind.
F.CK Abschirmgeflecht
• Temperature range: – 45°C to +105°C; Short-term to 150°C• Coverage: > 65 %• Typical screening values: 60 – 70 dB at 100 MHz• System belonging to: EMCFIX
• Temperaturbereich: – 45 °C bis +105°C; kurzzeitig bis 150°C• Bedeckungsgrad: > 65 %• Typische Schirmwerte: 60 – 70 dB bei 100 MHz• Systemzugehörigkeit: EMVFIX
F.CU Screening BraidThis braid is made of tin-plated copper. The product is used for screening of electro magnetic fields in connection withPMAFLEX conduits and EMCFIX fittings. It is used in machine, apparatus and vehicle building construction.
Dieses Geflecht wird aus verzinnten Kupferlitzen hergestellt. Das Produkt wird zur Abschirmung elektromagnetischer Felderund in Zusammenhang mit PMAFLEX-Rohren und EMVFIX-Verschraubungen verwendet. Es findet Anwendung imMaschinen-, Anlagen- und Fahrzeugbau.
F.CU Abschirmgeflecht
Order No.
Bestell-Nr.
F.CU.01F.CU.04F.CU.10F.CU.12F.CU.20F.CU.40F.CU.50
NW
NW
14
1012204050
Wiring
Litzenaufbau
16 x 4 x 0.1024 x 7 x 0.1036 x 7 x 0.1036 x 11 x 0.1036 x 7 x 0.1648 x 7 x 0.2548 x 9 x 0.30
Cross Section
Querschnitt
0.5 mm2
1.3 mm2
2.8 mm2
3.1 mm2
5.1 mm2
16.5 mm2
30.5 mm2
Operative Rangemin. Ø
Einsatzbereichmin. Ø1.0 mm3.0 mm4.0 mm6.0 mm
12.0 mm24.0 mm45.0 mm
Operative Rangemax. Ø
Einsatzbereichmax. Ø4.0 mm8.0 mm
10.0 mm14.0 mm25.0 mm49.0 mm65.0 mm
Weight nom.per 100 m
Gewicht nom.pro 100 m
0.5 kg1.2 kg1.8 kg3.0 kg7.4 kg
22.2 kg28.0 kg
Wiring
Litzenaufbau
16 x 5 x 0.1216 x 7 x 0.1224 x 7 x 0.1224 x 9 x 0.1424 x 10 x 0.1424 x 11 x 0.2048 x 16 x 0.1248 x 18 x 0.1448 x 20 x 0.1548 x 20 x 0.1536 x 14 x 0.30
NW
NW
346
1012.5152025303535
Order No.
Bestell-Nr.
F.CK.03F.CK.04F.CK.06F.CK.10F.CK.12.5F.CK.15F.CK.20F.CK.25F.CK.30F.CK.35F.CK.50
Cross Section
Querschnitt
0.90 mm2
1.27 mm2
1.90 mm2
3.33 mm2
3.69 mm2
8.29 mm2
8.68 mm2
13.30 mm2
16.96 mm2
16.96 mm2
35.61 mm2
Operative Rangemin. Ø
Einsatzbereichmin. Ø2.5 mm3.0 mm4.5 mm7.0 mm
11.0 mm13.0 mm16.0 mm22.0 mm27.0 mm33.0 mm40.0 mm
Operative Rangemax. Ø
Einsatzbereichmax. Ø3.5 mm5.0 mm9.0 mm
12.0 mm14.0 mm18.0 mm38.0 mm40.0 mm43.0 mm47.0 mm63.0 mm
Weight nom.per 100 m
Gewicht nom.pro 100 m
1.3 kg1.7 kg2.1 kg5.5 kg7.3 kg
11.5 kg15.3 kg20.7 kg31.0 kg42.5 kg37.8 kg
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Anschlussarmatur aus hochwertig formuliertem PolyamidEMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC ConnectorsEMV-Anschlüsse
2
EMCFIX System / EMVFIX System
VEMV PG VEMV PG
VEMV metric
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Anschlussarmatur aus hochwertig formuliertem PolyamidEMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
VEMV metrisch
Order No.IP68
Bestell-Nr.IP68
*VEMV-M120-5*VEMV-M120-10*VEMV-M162-5*VEMV-M162-10*VEMV-M207-6*VEMV-M207-10*VEMV-M253-7*VEMV-M253-11*VEMV-M329-8*VEMV-M329-13*VEMV-M406-8*VEMV-M406-13*VEMV-M508-9*VEMV-M508-14*VEMV-M638-10*VEMV-M638-14
Threadmetric
GewindemetrischM12x1.5M12x1.5M16x1.5M16x1.5M20x1.5M20x1.5M25x1.5M25x1.5M32x1.5M32x1.5M40x1.5M40x1.5M50x1.5M50x1.5M63x1.5M63x1.5
Fits toNW
passend zuNW10101212171723232929363648484848
Fits toF.CK
passend zuF.CK121212121515
20 / (25)20 / (25)25 / (30)25 / (30)30 / (35)30 / (35)
35353535
Fits toF.CU
passend zuF.CU1010121220202020
20 / (40)20 / (40)
404040404040
ThreadLength
Gewinde-länge5.0 mm
10.0 mm5.0 mm
10.0 mm6.0 mm
10.0 mm7.0 mm
11.0 mm8.0 mm
13.0 mm8.0 mm
13.0 mm9.0 mm
14.0 mm10.0 mm14.0 mm
OverallLength
Gesamt-länge
65.0 mm70.0 mm70.0 mm75.0 mm80.0 mm84.0 mm86.0 mm90.0 mm90.0 mm95.0 mm
100.0 mm105.0 mm105.0 mm110.0 mm106.0 mm110.0 mm
Order No.IP68
Bestell-Nr.IP68
*VEMV-P090 *VEMV-P112*VEMV-P137*VEMV-P167*VEMV-P163*VEMV-P213*VEMV-P293*VEMV-P299*VEMV-P366*VEMV-P488
ThreadPG
GewindePG
91113.516162129293648
Fits toNW
passend zuNW10121717232323293648
Fits toF.CK
passend zuF.CK12121515
20 / (25)20 / (25)20 / (25)25 / (30)30 / (35)
35
Fits toF.CU
passend zuF.CU12122020202020
20 / (40)4040
ThreadLength
Gewinde-länge
11.0 mm11.0 mm11.0 mm11.0 mm11.0 mm12.0 mm12.0 mm12.0 mm13.0 mm15.0 mm
OverallLength
Gesamt-länge
75.0 mm78.0 mm87.0 mm87.0 mm89.0 mm95.0 mm95.0 mm95.0 mm
104.0 mm110.0 mm
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railway vehicle construction. These products enable the clamping of the braiding outside the housing/casing (on conduit side).
Diese EMV-Adapter für Apparate, Anlagen, Systeme undSteckverbinder finden allgemein in Verbindung mit den PMAJACK-Geflechtstypen F.CU und F.CK in der Industriesowie im Maschinen- und Bahnbau Anwendung. Diese Teile ermöglichen den Abgriff des Geflechtes ausserhalbdes Gehäuses (wellrohrseitig).
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railwayvehicle construction. These products enable the clampingof the braiding outside the housing/casing (on conduit side).
Diese EMV-Adapter für Apparate, Anlagen, Systeme undSteckverbinder finden allgemein in Verbindung mit den PMAJACK-Geflechtstypen F.CU und F.CK in der Industrie so-wie im Maschinen- und Bahnbau Anwendung. Diese Teile ermöglichen den Abgriff des Geflechtes ausser-halb des Gehäuses (wellrohrseitig).
* = Replace with “B” to order black or “S” to order grey / * = Ersetzen Sie „B” für schwarz oder „S” für grau
* = Replace with “B” to order black or “S” to order grey / * = Ersetzen Sie „B” für schwarz oder „S” für grau
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Order No.IP68, black
Bestell-Nr.IP68, schwarz
BVEMV-P299/02BVEMV-P366/02BVEMV-P488/02
ThreadPG
GewindePG293648
Fits toNW
passend zuNW293648
Fits toF.CK
passend zuF.CK
25/(30)30/(35)
35
Fits toF.CU
passend zuF.CU
20/(40)4040
ThreadLength
Gewinde-länge
12.0 mm13.0 mm15.0 mm
OverallLength
Gesamt-länge
95.0 mm104.0 mm110.0 mm
EMC ConnectorsEMV-Anschlüsse
EMCFIX System / EMVFIX System
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 3
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting• Clamping with metal tie “BAND-IT”
• Anschlussarmatur aus hochwertig formuliertem PolyamidEMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen• Abgriff per Metallkabelbinder “BAND-IT”
VEMV/02 PG VEMV/02 PGThese EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railwayvehicle construction. These products enable the clampingof the braiding outside the housing/casing (on conduit side) with metal cabel tie “BAND-IT”.
Diese EMV-Adapter für Apparate, Anlagen, Systeme undSteckverbinder finden allgemein in Verbindung mit den PMAJACK-Geflechtstypen F.CU und F.CK in der Industriesowie im Maschinen- und Bahnbau Anwendung. Diese Teileermöglichen den Abgriff des Geflechtes ausserhalb desGehäuses (wellrohrseitig) mittels Metallkabelbinder “BAND-IT”.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC Connectors positionableEMV-Anschlüsse positionierbar
4
EMCFIX System / EMVFIX System
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting• Due to the positioning adapter a preassembled cable harness
system can be easily installed.
• Anschlussarmatur aus hochwertig formuliertem PolyamidEMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen• Durch die drehbare Konstruktion lässt sich auch ein
vorkonfektionierter Kabelbaum problemlos montieren.
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting• Due to the positioning adapter a preassembled cable harness
system can be easily assembled.
• Anschlussarmatur aus hochwertig formuliertem PolyamidEMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen• Durch die drehbare Konstruktion lässt sich auch ein
vorkonfektionierter Kabelbaum problemlos montieren.
PG,VEMV-133 positionablePG,VEMV-133 positionierbar
VEMV-SW metric, positionablemetrisch,VEMV-SW positionierbar
Fits toNW
passend zuNW1729364848
Fits toF.CK
passend zuF.CK15
25 / (30)30 / (35)
3535
Fits toF.CU
passend zuF.CU20
20 / (40)404040
ThreadLength
Gewinde-länge
10.0 mm13.0 mm13.0 mm14.0 mm14.0 mm
OverallLength
Gesamt-länge
107.0 mm123.0 mm137.0 mm145.0 mm145.0 mm
Order No.IP68
Bestell-Nr.IP68
*VEMV-P167-133*VEMV-P299-133*VEMV-P366-133*VEMV-P488-133
ThreadPG
GewindePG16293648
Fits toNW
passend zuNW17293648
Fits toF.CK
passend zuF.CK15
25 / (30)30 / (35)
35
Fits toF.CU
passend zuF.CU20
20 / (40)4040
ThreadLength
Gewinde-länge
11.0 mm12.0 mm13.0 mm13.0 mm
OverallLength
Gesamt-länge
108.0 mm122.0 mm135.0 mm144.0 mm
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railway vehicle construction. These products enable the clamping of the braiding outside the housing/casing (on conduit side).
Diese EMV-Adapter für Apparate, Anlagen, Systeme undSteckverbinder finden allgemein in Verbindung mit den PMAJACK-Geflechtstypen F.CU und F.CK in der Industriesowie im Maschinen- und Bahnbau Anwendung. Diese Teile ermöglichen den Abgriff des Geflechtes ausserhalbdes Gehäuses (wellrohrseitig).
These EMC connectors for installations are generallyused in connection with PMAJACK braidings type F.CUand F.CK in industry as well as in machine tool andrailway vehicle construction. These products enablethe clamping of the braiding outside the housing/casing (on conduit side).
Diese EMV-Adapter für Apparate, Anlagen, Systeme undSteckverbinder finden allgemein in Verbindung mit den PMAJACK Geflechtstypen F.CU und F.CK in der Industriesowie im Maschinen- und Bahnbau Anwendung. Diese Teile ermöglichen den Abgriff des Geflechtes ausser-halb des Gehäuses (wellrohrseitig).
Order No.IP68
Bestell-Nr.IP68
*VEMV-M207SW-10*VEMV-M329SW-13*VEMV-M406SW-13*VEMV-M508SW-14*VEMV-M638SW-14
Threadmetric
GewindemetrischM20x1.5M32x1.5M40x1.5M50x1.5M63x1.5
* = Replace with “B” to order black or “S” to order grey / * = Ersetzen Sie „B” für schwarz oder „S” für grau
* = Replace with “B” to order black or “S” to order grey / * = Ersetzen Sie „B” für schwarz oder „S” für grau
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
EMC Connectors Female Thread UNEFEMV-Anschlüsse Innengewinde UNEF
EMCFIX System / EMVFIX System
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 5
VIMV UNEF, MIL-C5015 VIMV UNEF, MIL-C5015
VIMV UNEF, MIL-C26482G
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Anschlussarmatur aus hochwertig formuliertem Polyamid EMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
VIMV UNEF, MIL-C26482G
• Fitting made of high-grade formulated polyamide EMC part made of nickel-plated aluminium
• With corresponding seals up to IP 68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Anschlussarmatur aus hochwertig formuliertem Polyamid EMV-Sockel aus Aluminium vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP 68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
Order No.black, IP68
Bestell-Nr.schwarz, IP68BVIMV-U182BVIMV-U212BVIMV-U247BVIMV-U357BVIMV-U433BVIMV-U569BVIMV-U566BVIMV-U568
ThreadUNEF
GewindeUNEF3/4"-207/8"-201"-20
17/16"-1813/4"-1821/4"-1621/4"-1621/4"-16
Fits toNW
passend zuNW1212171723293648
Fits toF.CK
passend zuF.CK12.512.51515
20 / (25)25 / (30)30 / (35)
35
Fits toF.CU
passend zuF.CU1212202020
20 / (40)4040
ThreadLength
Gewinde-länge
10.0 mm10.0 mm10.0 mm10.0 mm10.0 mm10.0 mm10.0 mm10.0 mm
OverallLength
Gesamt-länge
75.0 mm75.0 mm85.0 mm87.0 mm95.0 mm95.0 mm
110.0 mm110.0 mm
Order No.black, IP68
Bestell-Nr.schwarz, IP68
BVIMV-U212-14BVIMV-U247-14BVIMV-U267-14BVIMV-U293-14BVIMV-U303-14BVIMV-U323-14BVIMV-U359-14
ThreadUNEF
GewindeUNEF7/8"-201"-20
11/16"-1813/16"-1811/4"-1815/16"-1817/16"-18
Fits toNW
passend zuNW12171723232329
Fits toF.CK
passend zuF.CK12.5151520202020
Fits toF.CU
passend zuF.CU12202020202020
ThreadLength
Gewinde-länge
14.0 mm14.0 mm14.0 mm14.0 mm14.0 mm14.0 mm14.0 mm
OverallLength
Gesamt-länge
75.0 mm90.0 mm90.0 mm90.0 mm90.0 mm90.0 mm95.0 mm
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railway construction. They are especially suitable for backshells to MIL-C5015 connector series. These products enable the clamping of the braiding outside the housing/casing (on conduit side).
Diese EMV-Innengewinde-Adapter für Apparate, Anlagen undSteckverbinder finden allgemein in Verbindung mit den PMA-JACK Geflechtstypen F.CU und F.CK in der Industrie sowie imMaschinen- und Bahnbau Anwendung. Sie sind speziell für dieMIL-C5015 Steckerserie, unter Verwendung des passendenZwischenstückes, geeignet. Diese Teile ermöglichen den Abgriffdes Geflechtes ausserhalb des Gehäuses (wellrohrseitig).
Diese EMV-Innengewinde-Adapter für Apparate, Anlagen undSteckverbinder finden allgemein in Verbindung mit den PMA-JACK Geflechtstypen F.CU und F.CK in der Industrie sowie imMaschinen- und Bahnbau Anwendung. Sie sind speziell für dieMIL-C26482G Steckerserie, unter Verwendung des passendenZwischenstückes, geeignet. Diese Teile ermöglichen den Abgriffdes Geflechtes ausserhalb des Gehäuses (wellrohrseitig).
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railway construction. They are especially suitable for backshells to MIL-C26482G connector series. These products enable the clamping of the braiding outside the housing/casing (on conduit side).
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC Connectors with Strain ReliefEMV-Anschlüsse mit Zugentlastung
6
EMCFIX System / EMVFIX System
Order No.black, IP68
Bestell-Nr.schwarz, IP68
NKEZ-M160V-P2NKEZ-M160V-P3NKEZ-M202V-P1NKEZ-M202V-P3NKEZ-M207V-P3NKEZ-M207V-P5NKEZ-M257V-P3NKEZ-M257V-P5NKEZ-M406V-P4
• High-grade specially formulated polyamide 6• Thread made of nickel-plated brass• Sealing insert made of TPE-V• Very high impact resistance• Vibration-proof connection to PMAFLEX conduits• Pflitsch system UNI HF DICHT with UNI IRIS®-Spring• Most commonly available shielded cables can be contacted using this
connector• With the integrated strain relief cables are held optimally• Fits both conuduit profiles - fine (T) and coars (G)
• Hochwertig, speziell formuliertes Polyamid 6• Gewindestutzen aus Messing vernickelt• Dichteinsatz aus TPE-V• Hervorragende Schlagfestigkeit• Vibrationssichere Verbindung zu PMAFLEX-Schutzrohren• Pflitsch System UNI HF DICHT mit UNI IRIS®-Feder• Die meisten handeslüblichen, geschirmten Kabel können abgegriffen
werden• Mit der integrierten Zugentlastung werden die Kabel optimal gehalten• Passend zu Rohrprofilen fein (T) und grop (G)
These reinforced EMC connectors combine the PMAFIX Pro advanced sealing technology and the Pflitsch system UNIHF Dicht with a UNI IRIS® contact spring. They can be recommended for use in EMC sensitive applications withthe highest sealing requirements such as railway vehicleconstruction. They can be used with PMAJACK shieldingbraids of type F.CU and F.CK or with most conventionalshielded cables. The integrated strain relief element offersoptimal support for cables.
Diese verstärkten EMV-Adapter verwenden PMAFIX ProTechnologiezusammen mit der Pflitsch System UNI HF Dichtmit UNI IRIS® Feder und können für Anwendungen imSchienenfahrzeugbau, wo EMV eine entscheidende Rollespielt, empfohlen werden. Neben den PMAJACKSchirmgeflechtstypen F.CU und F.CK, können die meisten ge-schirmten Kabel mit dieser EMV-Verschraubung abgegriffenwerden. Dank integrierterZugentlastung werden die Kabel zu-dem optimal gehalten.
Threadmetric
GewindemetrischM16x1.5 M16x1.5 M20x1.5 M20x1.5 M20x1.5M20x1.5M25x1.5M25x1.5M40x1.5
Fits toNW
passend zuNW101012121717171736
TerminalRange
Klemm-bereich
5.0 – 8.0 mm6.5 – 9.5 mm4.0 – 6.5 mm6.5 – 9.5 mm6.5 – 9.5 mm
9.0 – 13.0 mm6.5 – 9.5 mm
9.0 – 13.0 mm20.0 – 25.0 mm
Screenø
Schirmø
2.5–6.0 mm 2.5–6.0 mm2.5–6.5 mm3.5–6.5 mm3.5–6.5 mm
6.5–10.5 mm3.0–8.0 mm
6.5–10.5 mm18.5–25.5 mm
ThreadLength
Gewinde-länge
6.0 mm6.0 mm6.5 mm6.5 mm6.5 mm6.5 mm7.5 mm7.5 mm8.0 mm
OverallLength
Gesamt-länge
54.5 mm54.5 mm61.0 mm61.0 mm66.0 mm66.0 mm67.5 mm67.5 mm99.0 mm
metrisch, geradeKEZ mit Zugentlastungmetric, straightKEZ with strain relief
InsideDiameter
Innen-Durchmesser
25.0 mm25.0 mm29.0 mm29.0 mm35.5 mm35.5 mm35.5 mm35.5 mm60.5 mm
EMC Connectors with Strain ReliefEMV-Anschlüsse mit Zugentlastung
EMCFIX System / EMVFIX System
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 7
• High-grade, specially formulated polyamide 6• Thread made of nickel-plated brass• PERFECT sealing ring made from NBR• Very high impact resistance• Vibration-proof connection to PMAFLEX conduits• With the integrated strain relief calbes are held optimally• High conduit pull-out sstrength• Fits both conduit profiles - fin (T) and coars (G)
• Hochwertiges, speziell formuliertes Polyamid 6• Gewindestutzen aus Messing vernickelt• PERFECT Dichtring aus NBR• Hervorragende Schlagfestigkeit• Vibrationssichere Verbindung zu PMAFLEX-Schutzrohren• Mit der integrierten Zugentlastung werden die Kabel optimal gehalten• Hohe Wellrohr-Ausreisskräfte• Passend zu Rohrprofilen fein (T) und grob (G)
KEZ PG, strain relief, metal
These reinforced EMC connectors employ the PMAFIX Pro advanced sealing technology and can be recommended foruse in EMC sensitive applications with the sealing highestrequirements such as railway vehicle construction.They can be used with PMAJACK shielding braids of typeF.CU and F.CK or with most conventional shielded cables. The integrated strain relief element offers optimal supportfor cables.
Diese verstärkten EMV-Adapter verwenden PMAFIX ProTechnologie und können für Anwendungen imSchienenfahrzeugbau, wo EMV eine entscheidende Rollespielt, empfohlen werden. Neben den PMAJACKSchirmgeflechtstypen F.CU und F.CK, können die meisten ge-schirmten Kabel mit dieserEMV-Verschraubung abgegriffenwerden. Dank integrierterZugentlastung werden die Kabel zu-dem optimal gehalten.
KEZ PG, Zugentlastung, Metall
Order No.black, IP68
Bestell-Nr.schwarz, IP68
NKEZ-M160V-10NKEZ-M162V-10NKEZ-M202V-10NKEZ-M207V-10NKEZ-M253V-11NKEZ-M257V-11NKEZ-M323V-13NKEZ-M329V-13NKEZ-M406V-13NKEZ-M409V-13NKEZ-M506V-14NKEZ-M508V-14NKEZ-M638V-14
Threadmetric
GewindemetrischM16x1.5 M16x1.5 M20x1.5 M20x1.5 M25x1.5M25x1.5M32x1.5M32x1.5M40x1.5M40x1.5M50x1.5M50x1.5M63x1.5
Fits toNW
passend zuNW10121217231723293629364848
ClampingRange
Klemm-bereich
5.0 – 9.0 mm5.0 – 9.0 mm9.0 –13.0 mm9.0 –13.0 mm
11.0 –16.0 mm11.0 –16.0 mm14.0 –21.0 mm14.0 –21.0 mm19.0 –27.0 mm19.0 –27.0 mm24.0 –35.0 mm24.0 –35.0 mm32.0 –42.0 mm
Fits toF.CU
passend zuF.CK06
10/12/1510/12/15
10/1515/20/25
12/1515/20/2520/25/3025/30/3520/25/3025/30/35
30/3535
ThreadLength
Gewinde-länge
10.0 mm10.0 mm10.0 mm10.0 mm11.0 mm11.0 mm13.0 mm13.0 mm13.0 mm13.0 mm14.0 mm14.0 mm14.0 mm
OverallLength
Gesamt-länge
63.0 mm68.5 mm70.5 mm76.0 mm80.0 mm78.5 mm85.5 mm90.0 mm98.5 mm93.0 mm
106.5 mm112.5 mm113.5 mm
Fits toF.CU
passend zuF.CU06/1010/1210/1212/20
2012/20
20204020404040
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC Connectors with Strain ReliefEMV-Anschlüsse mit Zugentlastung
8
EMCFIX System / EMVFIX System
Order No.black, IP68
Bestell-Nr.schwarz, IP68
NVEZ-M120V-10NVEZ-M160V-10NVEZ-M162V-10NVEZ-M202V-10NVEZ-M207V-10NVEZ-M253V-11NVEZ-M257V-11NVEZ-M323V-13NVEZ-M329V-13NVEZ-M406V-13NVEZ-M409V-13NVEZ-M506V-14NVEZ-M508V-14NVEZ-M638V-14
• High-grade formulated polyamideThread piece made of nickel-plated brass
• With corresponding seals up to IP68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Hochwertig formuliertes PolyamidGewindestutzen aus Messing vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
These reinforced EMC connectors are generally used inrailway vehicle construction and in machine building industry where EMC is necessary. Apart from the specialPMAJACK shielding braids type F.CU and F.CK, most conventional cables with shielding braids can be adapted tothis EMC connector. Due to the integrated strain relief, thecables are held in an optimal way.
Diese verstärkten EMV-Adapter finden allgemein imSchienenfahrzeug- und Maschinenbau Anwendung, dortwo EMV eine entscheidende Rolle spielt. Neben den speziel-len PMAJACK Schirmgeflechtstypen F.CU und F.CK, könnendie meisten handelsüblichen, geschirmten Kabel mit dieserEMV-Verschraubung abgegriffen werden. Dank integrierterZugentlastung werden die Kabel zudem optimal gehalten.
• High-grade formulated polyamideThread piece made of nickel-plated brass
• With corresponding seals up to IP68 static (IEC 60529/EN 60529)• Self-extinguishing, free from halogens and cadmium• Temperature range: – 40 °C to 105 °C; short-term: 160 °C• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Hochwertig formuliertes PolyamidGewindestutzen aus Messing vernickelt
• Mit entsprechendem Dichtungssatz bis zu IP68 statisch (IEC 60529/EN 60529)
• Selbstverlöschend, halogen- und cadmiumfrei• Temperaturbereich: – 40 °C bis 105 °C; kurzzeitig: 160 °C• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
VEZ PG, strain relief, metal
These reinforced EMC connectors are generally used inrailway vehicle construction and in machine building industry where EMC is necessary. Apart from the specialPMAJACK shielding braids type F.CU and F.CK, most conventional cables with shielding braids can be adapted tothis EMC connector. Due to the integrated strain relief, thecables are held in an optimal way.
Diese verstärkten EMV-Adapter finden allgemein imSchienenfahrzeug- und Maschinenbau Anwendung, dortwo EMV eine entscheidende Rolle spielt. Neben den speziel-len PMAJACK Schirmgeflechtstypen F.CU und F.CK, könnendie meisten handelsüblichen, geschirmten Kabel mit dieserEMV-Verschraubung abgegriffen werden. Dank integrierterZugentlastung werden die Kabel zudem optimal gehalten.
VEZ PG, Zugentlastung, Metall
Threadmetric
GewindemetrischM12x1.5 M16x1.5 M16x1.5 M20x1.5 M20x1.5M25x1.5M25x1.5M32x1.5M32x1.5M40x1.5M40x1.5M50x1.5M50x1.5M63x1.5
Fits toNW
passend zuNW1010121217231723293629364848
Fits toF.CK
passend zuF.CK
66
10 / 12 / 1510 / 12 / 15
12 / 15 15 / 20 / 25
12 / 15 15 / 20 / 2520 / 25 / 3025 / 30 / 3520 / 25 / 3025 / 30 / 35
30 / 3535
Fits toF.CU
passend zuF.CU6 / 10 6 / 10 10 / 1210 / 1212 / 20
2012 / 20
20204020404040
ThreadLength
Gewinde-länge
10.0 mm10.0 mm10.0 mm10.0 mm10.0 mm11.0 mm11.0 mm13.0 mm13.0 mm13.0 mm13.0 mm14.0 mm14.0 mm14.0 mm
OverallLength
Gesamt-länge
56.0 mm59.0 mm62.0 mm65.0 mm73.0 mm77.0 mm75.0 mm85.0 mm82.0 mm
100.0 mm87.0 mm
107.0 mm106.0 mm111.0 mm
TerminalRange
Klemm-bereich
3.0 – 6.0 mm5.0 – 9.0 mm5.0 – 9.0 mm
9.0 – 13.0 mm9.0 – 13.0 mm
11.0 – 16.0 mm11.0 – 16.0 mm14.0 – 21.0 mm14.0 – 21.0 mm19.0 – 27.0 mm19.0 – 27.0 mm24.0 – 35.0 mm24.0 – 35.0 mm32.0 – 42.0 mm
Order No.black, IP68
Bestell-Nr.schwarz, IP68NVEZ-P07MVNVEZ-P090VNVEZ-P110VNVEZ-P112VNVEZ-P167VNVEZ-P213VNVEZ-P299VNVEZ-P366VNVEZ-P488V
ThreadPG
GewindePG
79
11111621293648
Fits toNW
passend zuNW
71010121723293648
Fits toF.CK
passend zuF.CK
–6 / 10 / 1210 / 12 / 1510 / 12 / 1512 / 15 / 2015 / 20 / 2520 / 25 / 3025 / 30 / 35
30 / 35
Fits toF.CU
passend zuF.CU
–10 / 1210 / 1210 / 1212 / 20
20–4040
ThreadLength
Gewinde-länge5.0 mm6.0 mm6.0 mm6.0 mm6.5 mm7.0 mm8.0 mm9.0 mm
10.0 mm
OverallLength
Gesamt-länge
45.0 mm53.0 mm55.0 mm56.0 mm66.0 mm74.0 mm78.0 mm96.0 mm
100.0 mm
TerminalRange
Klemm-bereich
3.0 – 6.5 mm4.0 – 8.0 mm4.0 – 8.0 mm
5.0 – 10.0 mm10.0 – 14.0 mm13.0 – 18.0 mm18.0 – 25.0 mm24.0 – 32.0 mm34.0 – 44.0 mm
oroder
oroder
metrisch,VEZ Zugentlastung, MetallVEZ metric, strain relief, metal
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
EMC Connectors with Strain ReliefEMV-Anschlüsse mit Zugentlastung
EMCFIX System / EMVFIX System
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 9
Order No.black, IP68
Bestell-Nr.schwarz, IP68
NVEZ-M160V/P2NVEZ-M160V/P3NVEZ-M202V/P1NVEZ-M202V/P3NVEZ-M207V/P3NVEZ-M207V/P5NVEZ-M257V/P3NVEZ-M257V/P5NVEZ-M406V/P4
metric, straightVEZ with strain reliefThese reinforced EMC connectors can be recommended for usein EMC sensitive applications in railway vehicle constructionand the machine building industry. They employ the PflitschUNI HF Dicht system with a UNI IRIS contact spring. They canbe used with PMAJACK shielding braids of type F.CU and F.CKor with most conventional shielded cables. The integrated strainrelief element offers optimal support for cables.
• High-grade, specially formulated polyamide 6• Thread made of nickel-plated brass• Sealing insert made of TPE-V• Very high impact resistance• Vibration-proof connection to PMAFLEX conduits• Pflitsch system UNI HF DICHT with UNI IRIS®-Spring• Most conventionally shielded cables can be used with this
connector• High conduit pull-out strength
• Hochwertiges, speziell formuliertes Polyamid 6• Gewindestutzen aus Messing vernickelt• Dichteinsatz aus TPE-V• Hervorragende Schlagfestigkeit• Vibrationssichere Verbindung zu PMAFLEX-Schutzrohren• Pflitsch System UNI HF DICHT mit UNI IRIS®-Feder• Die meisten handelsüblichen, geschirmten Kabel können abgegriffen
werden• Hohe Wellrohr-Ausreisskräfte
Diese verstärkten EMV-Adapter können für Anwendungen imSchienenfahrzeug- und Machinenbau, wo EMV eine ent-scheidende Rolle spielt, empfohlen werden. Neben den PMAJACK Schirmgeflechtstypen F.CU und F.CK, können die meisten geschirmten Kabel mit dieser EMV-Verschraubung abgegriffen werden. Dank integrierterZugentlastung werden die Kabel zudem optimal gehalten.
metrisch, gerade mitVEZ Zugentlastung, Metall
Threadmetric
Gewinde metrischM16x1.5M16x1.5M20x1.5M20x1.5M20x1.5M20x1.5M25x1.5M25x1.5M40x1.5
Fits toNW
passendzu NW
101012121717171736
Clampingrange
Klemm-bereich
5.0–8.0 mm6.5–9.5 mm4.0–6.5 mm6.5–9.5 mm6.5–9.5 mm9.0–13.0 mm6.5–9.5 mm9.0–13.0 mm20.0–25.0 mm
Screenø
Schirmø
2.5–6.0 mm2.5–6.0 mm2.5–6.5 mm3.5–6.5 mm3.5–6.5 mm
6.5–10.5 mm3.0–8.0 mm
6.5–10.5 mm18.5–25.5 mm
ThreadLength
Gewinde-länge
6.0 mm6.0 mm6.5 mm6.5 mm6.5 mm6.5 mm7.5 mm7.5 mm8.0 mm
InsideDiameter
Innen-Durchmesser
23.0 mm23.0 mm28.5 mm28.5 mm31.0 mm31.0 mm31.0 mm31.0 mm60.5 mm
OverallLength
Gesamt-länge
49.5 mm49.5 mm54.0 mm54.0 mm60.0 mm60.0 mm61.5 mm61.5 mm98.5 mm
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC Connectors - UniversalEMV-Anschlüsse - Universelle
1 0
EMCFIX System / EMVFIX System
Order No.black, IP68
Bestell-Nr.schwarz, IP68
HFAK-M32/25-13HFAK-M40/32-13HFAK-M50/40-14HFAK-M63/63-14
HFAK metricThese EMC connectors are used in connection with PMAJACKbraidings type F.CU and F.CK in industry, in machine tool andrailway vehicle construction. Interference factors such as electrical signals and magnetic fields are transferred to the housing/casing box via the braided shielding linked with theEMC connector. The braiding ends within the adapter and is fixed with a cone.
Diese EMV-Adapter finden in Verbindung mit den PMAJACK-Geflechtstypen F.CU und F.CK in der Industrie, im Maschinen-und Bahnbau Anwendung. Störeinflüssee wie elektrischeImpulse und magnetische Felder werden von der Leitungs-abschirmung über den EMV-Adapter auf das Gehäuse ab-geleitet.Das Geflecht endet im Adapter und wird durch einenKonuseinsatz fixiert.
HFAK metrisch
HFAK PGThese EMC connectors are used in connection with PMAJACKbraidings type F.CU and F.CK in industry, in machine tool andrailway vehicle construction. Interference factors such as electrical signals and magnetic fields are transferred to the housing/casing box via the braided shielding linked with theEMC connector. The braiding ends within the adapter and is fixed with a cone.
Diese EMV-Adapter finden in Verbindung mit den PMAJACKGeflechtstypen F.CU und F.CK in der Industrie, im Maschinen-und Bahnbau Anwendung. Störeinflüssee wie elektrischeImpulse und magnetische Felder werden von der Leitungs-abschirmung über den EMV-Adapter auf das Gehäuse ab-geleitet.Das Geflecht endet im Adapter und wird durch einenKonuseinsatz fixiert.
HFAK PG
Thread metric1 2
Gewinde metrisch1 2
M32x1.5 M25x1.5M40x1.5 M32x1.5M50x1.5 M40x1.5M63x1.5 M63x1.5
Fits toNW
passendzu NW
23293648
Fits toF.CK
passendzu F.CK
2020 / (25)30 / (35)
35
Fits toF.CU
passendzu F.CU
20204040
ThreadLength
Gewinde-länge
13.0 mm13.0 mm14.0 mm14.0 mm
InsideDiameter
Innen-Durchmesser
16.8 mm22.4 mm32.4 mm43.4 mm
OverallLength
Gesamt-länge
42.0 mm51.0 mm58.0 mm57.5 mm
Order No.black, IP68
Bestell-Nr.schwarz, IP68HFAK-P11/09HFAK-P13/11HFAK-P16/13HFAK-P21/16HFAK-P29/21HFAK-P29/29HFAK-P36/36HFAK-P48/48
Thread PG1 2
Gewinde PG1 2
11 913.5 1116 13.521 1629 2129 2936 3648 48
Fits toNW
passendzu NW
1012171723293648
Fits toF.CK
passendzu F.CK
1012151520
20 / (25)30 / (35)
35
Fits toF.CU
passendzu F.CU
1010 / (12)12 / (20)
2020204040
ThreadLength
Gewinde-länge
11.0 mm11.0 mm11.0 mm11.0 mm12.0 mm12.0 mm13.0 mm13.0 mm
InsideDiameter
Innen-Durchmesser
6.2 mm7.8 mm8.2 mm
14.0 mm22.5 mm22.5 mm32.5 mm43.5 mm
OverallLength
Gesamt-länge
44.0 mm48.0 mm48.0 mm40.0 mm45.0 mm50.0 mm54.0 mm54.0 mm
Thread 2/Gewinde 2 Thread 1/Gewinde 1
Thread 2/Gewinde 2 Thread 1/Gewinde 1
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
• Nickel-plated aluminium• Up to IP68 in connection with the PMAFIX product range• Thread 1: on casing side, Thread 2: on conduit side• At thread 2 PMAFIX fittings straight and elbows may be applied.
Also standard cable glands may be applicable for screened cables depending on final use.
• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium vernickelt• Bis IP68 in Verbindung mit dem PMAFIX Produktesortiment• Gewinde 1: gehäuseseitig, Gewinde 2: wellrohrseitig• Die Weiterführung kann beim Gewinde 2 sehr flexibel gestaltet werden.
Zum einen können PMAFIX Gewindeverschraubungen mit unter-schiedlichen Abgangswinkeln verwendet und zum anderen geschirmteKabel mit Standard-Kabelverschraubungen adaptiert werden.
• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
• Nickel-plated aluminium• Up to IP 68 in connection with the PMAFIX product range• Thread 1: on casing side, Thread 2: on conduit side• At thread 2 PMAFIX fittings straight and elbows may be applied.
Also standard cable glands may be applicable for screened cables depending on final use.
• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium vernickelt• Bis IP68 in Verbindung mit dem PMAFIX Produktesortiment• Gewinde 1: gehäuseseitig, Gewinde 2: wellrohrseitig• Die Weiterführung kann beim Gewinde 2 sehr flexibel gestaltet werden.
Zum einen können PMAFIX Gewindeverschraubungen mit unter-schiedlichen Abgangswinkeln verwendet und zum anderen geschirmteKabel mit Standard-Kabelverschraubungen adaptiert werden.
• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
EMC Connectors - UniversalEMV Anschlüsse - Universelle
EMCFIX System / EMVFIX System
• Nickel-plated aluminium• Up to IP68 in connection with the PMAFIX product range• Thread 1: on casing side, Thread 2: on conduit side• The continuation on thread 2 can be made very flexible. • Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting• Fold back the braiding and tighten the nut to fix the screening braid
before continuing into the housing.
• Aluminium vernickelt• Bis IP68 in Verbindung mit dem PMAFIX Produktesortiment• Gewinde 1: gehäuseseitig, Gewinde 2: wellrohrseitig• Die Weiterführung kann beim Gewinde 2 sehr flexibel gestaltet werden.• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen• Geflecht zurückfalten und mit Überwurfmutter fixieren, um
anschliesssend das Schirmgeflecht in Gehäuse weiterzuführen.
Order No.black, IP68
Bestell-Nr.schwarz, IP68HFA-PG21/16HFA-PG29/21HFA-PG36/29HFA-PG48/36
Thread PG1 2
Gewinde PG1 2
21 1629 2136 2948 36
Fits toNW
passendzu NW
17232936
Fits toF.CK
passendzu F.CK
1520
30 / (35)35
Fits toF.CU
passendzu F.CU
20204040
ThreadLength
Gewinde-länge
11.0 mm12.0 mm13.0 mm13.0 mm
InsideDiameter
Innen-Durchmesser
17.0 mm22.0 mm30.0 mm40.0 mm
OverallLength
Gesamt-länge
30.0 mm32.0 mm34.0 mm36.0 mm
These EMC connectors for installations are generally used in connection with PMAJACK braidings type F.CU and F.CK in industry as well as in machine tool and railway vehicle construction. They are especially designed forshielding that has to be continued into the machine housing.
Diese EMV-Adapter für Apparate, Anlagen und Systeme, fin-den allgemein in Verbindung mit den PMAJACK Geflechts-typen F.CU und F.CK, in der Industrie sowie im Maschinen-und Bahnbau Anwendung. Sie eignen sich speziell für dieWeiterführung des Geflechtes auch innerhalb des Gehäuses.
HFA PG HFA PG
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Thread 2/Gewinde 2 Thread 1/Gewinde 1
For other sizes please contact your nearest PMA distribution partner or PMA headquarters. / Für andere Grössen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 1 1
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
EMC Connectors for use with Overbraided ConduitsEMV-Anschlüsse für Anwendungen mit überflochtenem Wellrohr
1 2
EMCFIX System / EMVFIX System
The EMV connector components for traction andmachinery installations are produced form nickel-platedaluminium or nickel-plated brass. They are especially designed for connecting overbraided corrugated conduitsfor EMC shielding. These connectors allow the simple connection and fixation of the overbraid. The connectorgrips into the conduit corrugation giving additional pull outstrength.The connector VEMD-RER is mounted with screws.
VEMD-RER VEMD-RERDie EMV-Anschluss-Komponenten für den Bahn- undAnlagenbau werden aus vernickeltem Aluminium oder ver-nickeltem Messing hergestellt. Sie eignen sich für denAnschluss eines Geflechtes für EMV-Schirmzwecke, welchesaussen über ein Wellrohr aufgezogen wird. Die Anschlüsseermöglichen einen sauberen Abgriff und die Fixierung desAussengeflechtes. Das Rohr wird mit einer Sicherungsrippezusätzlich fixiert.Die Befestigung des Anschlusses VEMD-RER erfolgtmittels Schrauben.
Order No.with Band-It*
Bestell-Nr.mit Band-It*
MVEMD-RER6MVEMD-RER8
Order No.with jubilee clip
Bestell-Nr.mit SchlauchbrideMVEMD-RER6/01MVEMD-RER8/01
Fits toNW
passendzu NW
3648
Fits toF.CK
passendzu F.CK
3550
DimensionsWidth x Height x Length
DimensionenBreite x Höhe x Länge54.0 x 54.0 x 53.0 mm66.0 x 66.0 x 53.0 mm
• Nickel-plated aluminium or brass• IP66 on conduit side• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium oder Messing vernickelt • IP66 rohrseitig• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
VEMD-RER with metal cable tie “Band-It” / VEMD-RER mit Metallkabelbinder „Band-It“
VEMD-RER with Jubilee clip / VEMD-RER mit Schlauchbride
Order No.with Band-It*
Bestell-Nr.mit Band-It*
MVEMD-P4856
Order No.with jubilee clip
Bestell-Nr.mit Schlauchbride
MVEMD-P4856/01
Fits toNW
passendzu NW
56
Fits toF.CK
passendzu F.CK
-
DimensionsWidth x Height x Length
DimensionenBreite x Höhe x Länge80.0 x 80.0 x 72.0 mm
• Nickel-plated aluminium or brass• IP66, up to IP68 on request• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium oder Messing vernickelt • IP66, bis IP68 auf Anfrage• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
VEMD with metal cable tie “Band-It” / VEMD mit Metallkabelbinder „Band-It“
VEMD with Jubilee clip / VEMD mit Schlauchbride
The EMV connector components for traction andmachinery installations are produced form nickel-platedaluminium or nickel-plated brass. They are especially designed for connecting overbraided corrugated conduitsfor EMC shielding. These connectors allow the simple connection and fixation of the overbraid. The connectorgrips into the conduit corrugation giving additional pull outstrength.The connector is fixed with a male PG thread.
VEMD PG VEMD PGDie EMV-Anschluss-Komponenten für den Bahn- undAnlagenbau werden aus vernickeltem Aluminium oder ver-nickeltem Messing hergestellt. Sie eignen sich für den An-schluss eines Geflechtes für EMV-Schirmzwecke, welchesaussen über ein Wellrohr aufgezogen wird. Die Anschlüsse ermöglichen einen sauberen Abgriff und die Fixierung desAussengeflechtes. Das Rohr wird mit einer Sicherungsrippe zusätzlich fixiert.Die Befestigung erfolgt über ein Aussengewinde PG.
ThreadPG
GewindePG48
EMC Connectors for use with Overbraided ConduitsEMV-Anschlüsse für Anwendungen mit überflochtenem Wellrohr
EMCFIX System / EMVFIX System
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 1 3
The EMV connector components for traction andmachinery installations are produced form nickel-platedaluminium or nickel-plated brass. They are especially designed for connecting overbraided corrugated conduitsfor EMC shielding. These connectors allow the simple connection and fixation of the overbraid. The connectorgrips into the conduit corrugation giving additional pull outstrength.The connector is fixed with a female metric thread.
VIMD metric VIMD metrischDie EMV-Anschluss-Komponenten für den Bahn- undAnlagenbau werden aus vernickeltem Aluminium oder ver-nickeltem Messing hergestellt. Sie eignen sich für denAnschluss eines Geflechtes für EMV-Schirmzwecke, welchesaussen über ein Wellrohr aufgezogen wird. Die Anschlüsseermöglichen einen sauberen Abgriff und die Fixierung desAussengeflechtes. Das Rohr wird mit einer Sicherungsrippezusätzlich fixiert.Die Befestigung erfolgt über ein metrisches Innen-gewinde.
• Nickel-plated aluminium or brass• IP66, up to IP68 on request• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium oder Messing vernickelt • IP66, bis IP68 auf Anfrage• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
Order No.with Band-It*
Bestell-Nr.mit Band-It*
MVIMD-M7456
Order No.with jubilee clip
Bestell-Nr.mit SchlauchbrideMVIMD-M7456/01
Fits toNW
passendzu NW
56
Fits toF.CK
passendzu F.CK
-
DimensionsWidth x Height x Length
DimensionenBreite x Höhe x Länge80.0 x 80.0 x 54.0 mm
VIMD with metal cable tie “Band-It”* / VIMD mit Metallkabelbinder „Band-It“*
VIMD with Jubilee clip / VIMD mit Schlauchbride
Threadmetric
Gewindemetrisch74 x 1.5
Order No.with Band-It*
Bestell-Nr.mit Band-It*
MVEMD-M406MVEMD-M6356
Order No.with jubilee clip
Bestell-Nr.mit Schlauchbride
MVEMD-M406/01MVEMD-M6356/01
Fits toNW
passendzu NW
3656
Fits toF.CK
passendzu F.CK
35-
DimensionsWidth x Height x Length
DimensionenBreite x Höhe x Länge55.0 x 55.0 x 59.0 mm80.0 x 80.0 x 72.0 mm
• Nickel-plated aluminium or brass• IP66, up to IP68 on request• Low transfer impedances• 360° clamping effect: High degree of safety in case of short-
circuiting
• Aluminium oder Messing vernickelt • IP66, bis IP68 auf Anfrage• Geringe Transfer-Impedanzen• 360°-Abgriff: Hohe Sicherheit auch bei Kurzschlussströmen
The EMV connector components for traction andmachinery installations are produced form nickel-platedaluminium or nickel-plated brass. They are especially designed for connecting overbraided corrugated conduitsfor EMC shielding. These connectors allow the simple connection and fixation of the overbraid. The connectorgrips into the conduit corrugation giving additional pull outstrength.The connector is fixed with a male metric thread.
VEMD metric VEMD metrischDie EMV-Anschluss-Komponenten für den Bahn- undAnlagenbau werden aus vernickeltem Aluminium oder ver-nickeltem Messing hergestellt. Sie eignen sich für denAnschluss eines Geflechtes für EMV-Schirmzwecke, welchesaussen über ein Wellrohr aufgezogen wird. Die Anschlüsseermöglichen einen sauberen Abgriff und die Fixierung desAussengeflechtes. Das Rohr wird mit einer Sicherungsrippezusätzlich fixiert.Die Befestigung erfolgt über ein metrisches Aussen-gewinde.
Content of delivery includes grey marked products. / Lieferumfang umfasst grau hinterlegte Produkte.
VEMD with metal cable tie “Band-It” / VEMD mit Metallkabelbinder „Band-It“
VEMD with Jubilee clip / VEMD mit Schlauchbride
Threadmetric
Gewindemetrisch40 x 1.563 x 1.5
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
AccessoriesZubehör
1 4
EMCFIX System / EMVFIX System
• Material: Stainless Steel• Colour: black
• Material: rostfreier Stahl• Farbe: schwarz
BAND-IT Clamping ToolHandtool, self locking for speedy application. The handy and robust “Band-It” feastening tool allows easys strapping of metal cable ties “Band-It”. For long lasting fixation without deformation.
Handwerkzeug, selbst-verriegelnd für schnelle Anwendungen.Das handliche, robuste „Band-It“ Verarbeitungswerkzeug er-möglich das einfache, schnelle und problemloseVerschliessen von Metallkabelbindern „Band-It“. Für dauer-hafte Verschlüsse ohne Quetschverbindungen oderVerformungen.
BAND-IT Kabelbinderzange
Order No.
Bestell-Nr.
PMA-Tie-Tool
For Band-ItWidth
Für Band-ItBreite6.35 mm
AccessoriesZubehör
EMCFIX System / EMVFIX System
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 1 5
MM Hexagonal Lock Nuts, metric, metal
These hexagonal lock nuts are suitable for a wide range of applications. Maximum possible torque guarantees a safe connection of the system.
• Brass galvanically nickel-plated
• Messing galvanisch vernickelt
Diese Sechskant-Gegenmuttern eignen sich in einem breitenAnwendungsgebiet und gewährleisten eine sichereSystemverbindung durch höchst mögliche Anzugsdrehmomente.
MM 6-kant Gegenmuttern, metrisch, Metall
Order No.metal
Bestell-Nr.Metall
GMM-M12GMM-M16GMM-M20GMM-M25GMM-M32GMM-M40GMM-M50GMM-M63
Fits to threadmetric
passend zu GewindemetrischM12x1.5M16x1.5M20x1.5M25x1.5M32x1.5M40x1.5M50x1.5M63x1.5
WrenchSize
Schlüssel-weite15 mm19 mm24 mm30 mm36 mm46 mm60 mm70 mm
DimensionsThickness
DimensionenDicke
2.8 mm3.0 mm3.5 mm4.0 mm5.0 mm5.0 mm5.0 mm6.0 mm
MM Hexagonal Lock Nuts, PG, metalThese hexagonal lock nuts are suitable for a wide range of applications. Maximum possible torque guarantees a safe connection of the system.
Diese Sechskant-Gegenmuttern eignen sich in einem breitenAnwendungsgebiet und gewährleisten eine sichereSystemverbindung durch höchst mögliche Anzugsdrehmomente.
MM 6-kant Gegenmuttern, PG, Metall
Order No.metal
Bestell-Nr.Metall
GMM-07GMM-09GMM-11GMM-13GMM-16GMM-21GMM-29GMM-36GMM-42GMM-48
Fits to threadPG
passend zu GewindePG
79
1113.5162129364248
WrenchSize
Schlüssel-weite15 mm18 mm21 mm23 mm26 mm32 mm41 mm51 mm60 mm64 mm
DimensionsThickness
DimensionenDicke
3.0 mm3.0 mm3.0 mm3.0 mm3.0 mm3.5 mm4.0 mm5.0 mm5.0 mm5.5 mm
• Brass galvanically nickel-plated
• Messing galvanisch vernickelt
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz.
AccessoriesZubehör
1 6
EMCFIX System / EMVFIX System
GPS One-piece System SupportsThey are specially designed for increased mechanical requirements in the traction and heavy machine buildingindustries. The one-piece system supports offers clasp foran easy pre-mounting and final assembly, fixation on stan-dard rails type C and strain relief due to gripping around theconduit. In addition are these products partially stackable.
• High-grade formulated polyamide• Self-extinguishing, free from halogens and cadmium• Excellent impact strength• Clasp for easy pre-mounting and final assembly• Useable with standard rails type C• The following nominal widths can be combined for stacking:
NW 17 with NW 23NW 29 with NW 36NW 48 with NW 56
• Temperature range: – 40 °C to 105 °C; Short-term 160 °C• Content of delivery: System support and 2 pcs PT screws KA 35 x 14
• Hochwertig formuliertes Polyamid• Selbstverlöschend, halogen- und cadmiumfrei• Hervorragende Schlagfestigkeit• Schnappverschluss für einfache Vor- und Endmontage• Anwendbar mit Standard-C-Schienen• Folgende Nennweiten sind untereinander stapelbar:
NW 17 mit NW 23NW 29 mit NW 36NW 48 mit NW 56
• Temperaturbereich: – 40 °C bis 105 °C; Kurzzeitig 160 °C• Lieferumfang: Systemhalter und 2 Stk. PT-Schrauben KA 35 x 14
Die Systemhalter eignen sich speziell für erhöhte mecha-nische Beanspruchung im Schienenfahrzeugbau undschweren Maschinenbau. Die einteiligen Systemhalter bieten einen Schappverschluss für eine einfache Vor- undEndmontage, die Montierbarkeit auf Standard-C-Schienenund Zugentlastung mit Fixierungsrippen. Die Produkte sind inabgestimmter Kombination stapelbar.
GPS Einteilige Systemhalter
Order No.fine profile
Bestell-Nr.FeinprofilBGPS-17BGPS-23BGPS-29BGPS-36BGPS-48BGPS-56
Fits to conduit sizeNW metric DIN-NW
Passend zu RohrgrösseNW metrisch DIN-NW17 20 223 25 229 32 336 40 348 50 456 – 4
DimensionsWidth
DimensionenBreite70.0 mm70.0 mm85.0 mm85.0 mm
115.0 mm115.0 mm
DimensionsHeight
DimensionenHöhe
45.0 mm45.0 mm60.0 mm60.0 mm90.0 mm90.0 mm
DimensionsDepth
DimensionenTiefe
30.0 mm30.0 mm30.0 mm30.0 mm30.0 mm30.0 mm
GH Tube ClampsThese tube clamps are used for the mounting of PMA con-duits. The integrated rib allows an optimal strain relief andthus avoids the movement of the conduit in axial direction.Due to the rib the clamp can also be pre-mounted on theconduit. This allows easy handling during installation.
Diese Rohrschellen dienen zur Befestigung von PMA-Wellrohren. Die integrierte Rippe bietet eine optimaleZugentlastung und verhindert eine Verschiebung der Rohre inAxialrichtung. Ausserdem ermöglicht die Rippe eineVorfixierung der Schelle auf dem Rohr und erleichtert dadurchdie Montage.
GH Rohrschellen
Order No.black
Bestell-Nr.schwarzBGH-23BGH-29BGH-36BGH-48
Fits to conduit size NW
passend zu Rohr-grösse NW
23293648
Fits to conduit size metric
passend zu Rohr-grösse metrisch
25324050
DimensionsWidth
DimensionenBreite
58.0 mm70.0 mm80.0 mm94.0 mm
Fixingscrew
Befestigungs-schrauben
2 x M52 x M62 x M62 x M6
• High-grade formulated polyamide• Temperature range: – 40 °C to 105 °C
• Hochwertig formuliertes Polyamid• Temperaturbereich: – 40 °C bis 105 °C
Order No.grey
Bestell-Nr.grau
SGH-23SGH-29SGH-36SGH-48
GL Tube ClampsThese tube clamps are used for the mounting of PMA con-duits. The integrated rib allows an optimal strain relief andthus avoids the movement of the conduit in axial direction.Due to the rib the clamp can also be pre-mounted on theconduit. This allows easy handling during installation.
Diese Rohrschellen dienen zur Befestigung von PMA-Wellrohren. Die integrierte Rippe bietet eine optimaleZugentlastung und verhindert eine Verschiebung der Rohre inAxialrichtung. Ausserdem ermöglicht die Rippe eineVorfixierung der Schelle auf dem Rohr und erleichtert dadurchdie Montage.
GL Rohrschellen
Order No.black
Bestell-Nr.schwarzBGL-07BGL-10BGL-12BGL-17BGL-23BGL-29
Fits to conduit size NW
passend zu Rohr-grösse NW
071012172329
Fits to conduit size metric
passend zu Rohr-grösse metrisch
101216202532
DimensionsWidth
DimensionenBreite25.027.031.039.549.057.0
Fixingscrew
Befestigungs-schrauben
1 x M41 x M41 x M41 x M51 x M51 x M6
• High-grade formulated polyamide• Temperature range: – 40 °C to 105 °C
• Hochwertig formuliertes Polyamid• Temperaturbereich: – 40 °C bis 105 °C
Order No.grey
Bestell-Nr.grau
SGL-07SGL-10SGL-12SGL-17SGL-23SGL-29
Important InformationWichtige Informationen
For other sizes/ lengths please contact your nearest PMA distribution partner or PMA headquarters / Für andere Grössen/Längen kontaktieren Sie bitte Ihre nächste PMA Vertretung oder PMA Schweiz. 1 7
Product recommendations within this catalogue are intended as a guideline only and are accurate to
the best of our knowledge. However, PMA AG accepts no responsibility for the unsuitability of a par-
ticular product and customers are strongly advised to carry out their own evaluation tests prior to
specifying PMA products for certain applications.
Produktempfehlungen in diesem Katalog erfolgen gemäss unserem besten Wissen und bisherigen
Erkenntnissen und verstehen sich als Richtlinie. PMA AG übernimmt keinerlei Verantwortung für un-
sachgemäss angewendete Produkte und daraus entstandene Folgeschäden. Die Eignung des
Produktes für eine spezifische Anwendung muss vom Benutzer des PMA-Produktes selbst überprüft
werden.
The text, pictures, drawings and application photos which are published in this document may not, in
part or totally, be copied or used by any third party in any form or way. Especially the downloading of
text, pictures, drawings and application photos onto Online Services is strictly forbidden, irrespective
of if they are edited for this purpose or not. At all times PMA AG reserves the right to take all legal
steps necessary.
Die in diesem Dokument publizierten Texte, Bilder, Skizzen und Anwendungsfotos dürfen von Dritten
weder ganz noch teilweise kopiert, bearbeitet oder anderweitig verwendet werden. Ausgeschlossen
ist insbesondere auch eine Einspeisung auf Online-Dienste, unabhängig davon, ob die Fotos, Skizzen
oder Texte zu diesem Zweck bearbeitet werden oder nicht. PMA AG behält sich jederzeit rechtliche
Schritte vor.
Overview of CataloguesKatalogübersicht
CompanyProfileOverview of the structure and services of PMA.
Überblick über dieFirmenstruktur undDienstleistungen vonPMA AG.
PMAJACKSYSTEMSpecial series of braids and braidterminations.
SpezialsortimentGeflechte undEndabschlüsse.
AUTOMATIONPRODUCTSSpecial products for automation applications.
Spezialsortiment für die Automation.
PMA EX-SystemLoad discharging polyamide products for use in explosion endangered areas.
Spezialprodukte aus ab-leitendem Polyamid fürexplosionsgefährdeteZonen.
PMAFIX Pro
Next generation cableprotection. IP69K forstatic and dynamic applications.
Kabelschutz der näch-sten Generation. IP69Kfür statische und dyna-mische Anwendungen.
PMAFIX /PMAFLEXThe PMA main cataloguewith 6’500 excellent products.
PMA Hauptkatalog mitüber 6’500 Qualitäts-produkten.
PMA SMART LINEFunctional and moderndesign with high qualityat an excellent price.
Funktionelles und mo-dernes Design bei ho-her Qualität zu einemausgezeichnetem Preis.
PMA SelectionFrom a range of 6’500products, the most frequently specified.
Eine Auswahl aus über6’500 Produkten.
RailwayInfrastructure PMA‘s multi-layer conduits for railwayinfrastructure applica-tions.
PMA Mehrschicht-Well-rohre für Anwendungenin der Bahn-Infrastruktur.
Energy Markets
PMA conduit and fittings for the energy generation market.
PMA Wellrohre undArmaturen für Ener-giemärkte.
PMA-KAT.6 D/E
CABLE PROTECTIONKABELSCHUTZTECHNIK
PMA HeadquartersPMA Hauptsitz
PMA SubsidiariesPMA Tochterfirmen
Please visit our website for the addresses of more than 45 PMA distributors worldwide: www.pma.ch
Die Adressen von über 45 PMA Distributoren
weltweit finden Sie auf unserer Webseite:
www.pma.ch
Your local partner:Ihr lokaler Ansprechpartner:
Switzerland / Schweiz
PMA AG (Headquarters)Aathalstrasse 90CH-8610 UsterTel: +41 / 44 905 61 11Fax: +41 / 44 905 61 [email protected] · www.pma.ch
Germany / Deutschland
PMA Deutschland GmbHRobert-Bosch-Strasse 7D-97437 Hassfurt Tel: +49 / 9521 957 71-0Fax: +49 / 9521 957 [email protected] · www.pma-de.com
France / Frankreich
PMA France S.A.R.L.18, Avenue du Québec, Néflier, Villebon Silic 607F-91945 Courtabœuf CedexTel: +33 / 169 59 16 66Fax: +33 / 169 59 16 [email protected] · www.pma-fr.com
Great Britain / Grossbritannien
PMA UK LimitedUnit 4 Imperial Court, Magellan CloseWalworth Industrial Estate, UK-Andover, Hants SP10 5NTTel: +44 / 1264 333527Fax: +44 / 1264 [email protected] · www.pma-uk.com
Austria / Österreich
PMA GmbHPernerstorferstrasse 9A-2700 Wiener NeustadtTel: +43 / 2622 204 66 / 0Fax: +43 / 2622 203 [email protected] · www.pma-at.com
Italy / Italien
PMA Italia s.r.l.,Via Marmolada 12I-20037 Paderno Dugnano (MI)Tel: +39 / 02 91084241Fax: +39 / 02 [email protected] · www.pma-it.com
Spain / Spanien
PMA Protección Cable S.L.Pol. Ind. Cardedeu Sud, Avda. Vallés, 22E-08440 Cardedeu (Barcelona)Tel: +34 / 938 45 45 70Fax: +34 / 938 45 47 [email protected] · www.pma-es.com
USAPMA USA Inc.5340 Jaycee Avenue, Suite H-IUS-Harrisburg, PA 17112Tel: +1 / 717 545 9404Fax: +1 / 717 545 [email protected] · www.pma-usa.org