Company
LOGO
ELID 2008 IDT
EL5xxx Hardware and System Configuration
Hardware and System Configuration
1. Hardware Overview1. Hardware Overview
2. EL5xxx series Controller2. EL5xxx series Controller
3. Reader Interface Unit (RIU)3. Reader Interface Unit (RIU)
4. Accessories 4. Accessories
5. System Configuration 5. System Configuration
Matrix V Hardware
Hardware Overview
EL5xxx Series Controller
MAIN CONTROLLER.MAIN CONTROLLER. EL5xxx
Multi-door controller Intel Chipset Built in LAN
THE FAMILYTHE FAMILY EL5000 – 8 Doors
Combination of Door Access System, Car Park, Time Clock, and Combo mix mode.
EL5002 2 doors controller
EL5004 4 doors controller
EL5500 16 doors controller
EL5000L 8 Lift controller up to 32 Floors/ Lift
EL5030 5 doors controller
** Proprietary encryption…
EL5000 Controller
LAN Port
E-BUS1
E-BUS2
Reset Button
I/O Expansion Port
A/C Power Socket
Temper Switch, AC fail, Battery low
LCD Display
EPROM (EVEN)
EPROM (ODD)
Keypad
Battery Shunt
EL5000 v 3.x.x
Cold Start Mode - EL5000V3 mode (A) or ET5000 mode (B)
EL5000V3 mode Card Database - from 33,000 to 38,165. Transaction Database - from 22,000 to 30,000 Mix mode – Door access with simple Time Clock feature.
ET5000 mode Card Database - 19,846. Time Clock Access Level (i.e, you must clock-in or out at
certain reader and at certain time) Card holder's database can now holds 16 character
name and will be displayed on the EK9i when badge card.
Reason code support – To leave the attendant reason. Timers – from 24 to 99 per door Timezones – from 10 to 99 per door Holiday – from 20 to 40 16 char door label support for EK9i The Mixed mode now support Reason Code
Selection (20 sets, each with 16 character long text) Enhanced baud rate speed: 9600 and 57600bps
EL5002 Controller
LAN PortE-BUS to EFD 80
Reset Button
I/O Expansion Port
D/C Power Socket
Temper Switch, AC fail, Battery low
LCD Display
EPROM (EVEN)
EPROM (ODD)
Keypad
Battery Shunt
Door # 2* In & Out reader
* Push button
* Door Sensor
* EM Lock
Door # 1* In & Out reader
* Push button
* Door Sensor
* EM Lock
EA 8
EA 8
EPROM (ER505)
EL5004 Controller
Multi-function, configurable for either Card access, Carpark control, Time clock or Mixed Mode
Enhanced anti-passback capabilities 40 holidays 99 timezones, with 99 timers, each with 4 time
intervals Escorting dual-card mode for high security door Special Card capability to arm and disarm sensors 2 MB on-board memory (Up to 33,000 cardholders
and 22,000 transactions) Status LEDs for DC Power, Database Health, CPU
heartbeat, Ethernet and RS485 communication Dedicated inputs for tamper, battery low and AC
power failure status Advanced Encryption Standard 128-bit secured
communication algorithm Local board is 2 doors + Connect to RIU for 2 doors. Enhanced baud rate speed: 9600 and 57600bps
EL5004 Controller
LAN Port
E-BUS to RIU for Door 3, and Door 4
Reset Button
I/O Expansion Port
D/C Power Socket
Temper Switch, AC fail, Battery low
LCD Display
EPROM (EVEN)
EPROM (ODD)
Keypad
Battery Shunt
Door # 2* In & Out reader
* Push button
* Door Sensor
* EM Lock
Door # 1* In & Out reader
* Push button
* Door Sensor
* EM Lock
EA 8
EA 8
EPROM (ER505)
EL5500 Controller
EL5500 flexible mode 120,000 Card Users, 23,000 Transactions 33,000 Card Users, 160,000 Transactions 50,0000 Card Users, 80,000 Transactions
ET5500 card-db size is 61,000 3 E-bus - 2-wire RS-485 channels
E-Bus 1 and E-Bus 2 connect to RIU E-Bus 3 connect to EFD.
Enhanced baud rate speed: 9600 and 57600bps
EL5500 Controller
LAN Port
E-BUS1
E-BUS2
Reset Button
I/O Expansion Port
D/C Power SocketTemper Switch, AC fail, Battery low
LCD Display
EPROM (EVEN)
EPROM (ODD)
Keypad
Battery Shunt
E-BUS3
EL5030 Controller
5-door Networked Door Access - Serve as the cost-effective family member for the IP-based Matrix V Integrated Security System.
1 channel RS-485 communication bus. Connect up to 4 unit of ER62 RIU for 4 ENTRY and 4 EXIT card readers.
Store up to 4,000 cardholders and holds 10,000 transactions in case the communication is disrupted with the server host.
32-bit low-power and high-performance microprocessor IP addressable - Ethernet TCP/IP network, or ADSL
modem/router with Dynamic DNS support 12VDC /1A input power requirement with single CR2032 Lithium
battery cell for data-backup Multi-functions, configurable as either Standard card access,
Car-park control or Time-clock Mixed Mode Enhanced anti-passback capabilities (hard/soft/alarm) 40 holidays set, 10 timezones, with 24 timers, each with 2 time
intervals Status LEDs for DC Power, Database Health, CPU heartbeat,
Ethernet and RS485 communication Dedicated inputs for tamper, battery low and AC power failure
status
EL5030 Controller
In Reader Door1
EL5030
In Reader Door2
In Reader Door3
* Door 1Push ButtonEM Lock, Door Sensor
* Door 2Push ButtonEM Lock, Door Sensor
* Door 3Push ButtonEM Lock, Door Sensor
EL5030 Typical Configuration
LAN Port
E-BUS
D/C Power Socket
Reader Interface Unit
ER505 Reader Interface Unit
Door # 1* In & Out reader
* Keypad
* Push button
* Door Sensor
* EM Lock
EA 8 EA 8
Door # 2* In & Out reader
* Keypad
* Push button
* Door Sensor
* EM Lock
Temper Switch, AC fail, Battery low
D/C Power Socket
Dip Switch
Reset Button
RS485 Socket
EPROM
ER504 Reader Interface Unit
Door # 1* In & Out reader
* Keypad
* Push button
* Door Sensor
* EM Lock
EA 8
Temper Switch, AC fail, Battery low
D/C Power Socket
Reset Button
RS485 Socket
EPROM
Dip Switch
ER 502 Reader Interface Unit
Single door R.I.U. 2 reader -1 In and 1 Out Onboard 7 segment LED for unit number display DIP switches for changing unit number. 7 input point - Panel tamper switch, door sensor, push button,
AC fail, battery low, sensor 1 and sensor 2. 4 relay output - EM lock or door latch, GP output 1, GP output
2 and buzzer. EK9S up to 50m length. EA8 I/O expansion board. Enhanced baud rate speed: 9600 and 57600bps Support 4x3 keypad Support door access and car park mode Wiegand input and output which support simultaneous
reading Reader format supports:
Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare) Barcode (2of5, 3of9)
ER 502 Reader Interface Unit
* Push button
* Door Sensor
* EM Lock
EA 8
Temper Switch, AC fail, Battery low
A/C Power SocketReset Button
RS485 Socket
EPROM
EK9S Keypad
In reader
Out reader
* Sensor 1* Sensor 2
* GP output 1* GP Output 2
4x3 Keypad
Dip Switch
LED – Unit NumberBaud Rate Jumper
EK9i LCD Reader Interface Unit
2 models Blue LCD (2x16 line) Yellow LCD (Single line, No Backlit)
Single door R.I.U. 2 reader -1 in and 1 out LCD menu for setting- unit number, baud rate and etc. 6 input point - Panel tamper switch, door sensor, push button,
AC fail, battery low, sensor 1. 2 relay output - EM lock or door latch, GP output 1 or buzzer. Option connect to EL3Z relay board for better security Enhanced baud rate speed: 9600 and 57600bps Wiegand input and output which support simultaneous
reading Reader format supports:
Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare)
Support messaging, and door label Reader Beeper control Random tone keypad Support offline reader access mode (up to 10 cards) Power Saving Mode – Auto off when idle
EK9i LCD Reader Interface Unit
In Reader
Out Reader
Cold Start Button
Reset Button
RS485 Socket
GP Output
* EM Lock* Push Button* Door Sensor* Key Switch* Sensor / Tamper
D/C Power Socket
Battery LowAC Fail
EPROM
Temper Switch
Buzzer
Nuevo LCD Reader Interface Unit
LCD display – 16 x 2 Amber color Cap Sense Keypad – Button-less backlit keypad with dimming
effect High quality voice indicator – adjustable volume with random tone
when touch keypad USB connection for firmware upgrade and setting. Elegant curve design with mirror finish and scratch resistant Power Saving Mode – Auto off when idle Single door R.I.U Build-in Reader and connect to 1 out reader - support
simultaneous reading LCD menu for setting - unit number, baud rate and etc Enhanced baud rate speed: 9600 and 57600bps Support messaging, and door label Reader format supports:
Wiegand 26-bit (HID, EM, Mifare) Free Wiegand (max. 40-bit)(HID, EM, Mifare)
All inputs (tamper switch, door sensor, push button, sensor 1 and 2, AC fail and battery low) and all outputs (door latch and GP 1) are routed to an external I/O board
Support offline reader access mode (up to 10 cards) Option - Release door when host controller is offline (break down)
Nuevo LCD Reader Interface Unit
Nuevo LCD Keypad With build-In Reader
Nuevo Out Reader
ER62 Reader Interface Unit
16-bit low-power and high-performance microprocessor with 128KB Flash memory
2 reader ports configurable either as 1 door with ENTRY/EXIT readers or 2 door with ENTRY reader and EXIT PUSH BUTTON
RS-485 communication with 57600 baud or 9600 baud
Support Wiegand-26, Free Wiegand, HID, EM, MIFARE, ABA Magnetic Cards and Barcode Cards
4 sensor inputs 6 open-collector transistor outputs 12VDC / 0.5A power requirement
ER62 Reader Interface Unit
In Reader Out Reader
2-wire RS485 from EL5030
ER62
Connect to EL5030
EFD 80 Field devices
8 On Board Outputs
+
24 expansion Outputs
16 On Board Inputs
EA5168 Field devices
EA 5168 Overview
8 On Board Outputs
8 On Board Inputs
EA8 Field devices
6 On Board Outputs
2 On Board inputs
EL3Z Field devices
Outputs
* Door Sensor
* AC Fail
* Push Button
* Interlock
Accessories
EA584 star hub Connect the RS485 device into star
topology instead of the conventional daisy chain topology.
Can connect up to 4 Devices Connection usage - RIU and I / O
Field Devices Each connection distance is up to
1km 12VDC
EA584 Configuration
ES8A Relay Board
8 On Board Outputs
Connect to EFD
System Configuration
EL 5000
(64 input and 64 output)
(128 input and 256 output)
System Configuration
EL 5500
(64 input and 64 output)
(128 input and 256 output)
System Configuration
EL 5002
(64 input and 64 output)
(128 input and 256 output)
System Configuration
EL 5004
(64 input and 64 output)
System Configuration
EL 5030 – Option 1
In Reader Door1
EL5030
ER62
In Reader Door2
In Reader Door3
In Reader Door4 In Reader
Door5
* Door 1Push ButtonEM Lock, Door Sensor
* Door 2Push ButtonEM Lock, Door Sensor
* Door 3Push ButtonEM Lock, Door Sensor
* Door 5Push ButtonEM Lock, Door Sensor
* Door 4Push ButtonEM Lock, Door Sensor
System Configuration
EL 5030 – Option 2
*Door 1 In ReaderEL5030
ER62
* Door 1EM Lock, Door Sensor
*Door 1 Our Reader
*Door 2 In Reader
*Door 2 Our Reader
* Door 2EM Lock, Door Sensor
ER62*Door 5 In Reader
*Door 5 Our Reader
* Door 5EM Lock, Door Sensor
ER62*Door 3 In Reader
*Door 3 Our Reader
* Door 3EM Lock, Door Sensor
ER62
*Door 4 In Reader * Door 4EM Lock, Door Sensor
*Door 4 Our Reader
2 wire RS485
Q n A
Top Related