Duracast™ Fiberglass Columns
While timeless beauty and elegance come standard with all Dixie-Pacific™, for extreme durability, minimal maintenance, and designs for both interior and exterior applications, DuraCast™
Fiberglass Columns are exactly what you’ve been looking for.
DuraCast™ Columns are designed for all types of decorative and load-bearing installations. They are manufactured from highly advanced fiberglass reinforced polymers (FRP), which makes them very durable – all components are insect-, weather- and decay-resistant, and carry a limited lifetime warranty. With architecturally correct proportions and projections, DuraCast™ Columns are available in a range of styles to fit any project. Each must pass quality control inspections before it is shipped – making sure that each represents the unmistakable Dixie craftsmanship.
DuraCast™ Column Features:Round or Square• Architecturally Correct Proportions• Plain or Fluted Shaft• Durable• Low Maintenance• Decay Resistant• Load Bearing• Decorative Capitals Available• Limited Lifetime Warranty•
Choosing the Right DuraCast™ Column1. Choose the column style:
round, square, tapered or non-tapered, plain or fluted
2. Choose the appropriate column size.
See Smart Size Ordering information on page 3 to determine the correct size for your application
3. Select the appropriate cap and base/plinth,
and determine if you want a beautifully detailed Decorative Capital
DuraCast™ Fiberglass Column Styles
Round Tapered(Plain or Fluted)
Round Tapered
Knee-Wall(Plain or Fluted)
Round Non-
Tapered(Plain or Fluted)
Round Non-
TaperedKnee-Wall(Plain or Fluted)
Round Barrel
Square Tapered
Square Tapered
Knee-Wall
[4] www.dixiepacific.com 1.800.468.5993
Plan Types for Split DuraCast™ Columns
A B C D Q
E F G H K
Fiberglass Column Installation Kit
Decorative Capitals for DuraCast™ Columns
Caps & Base/Plinths for DuraCast™ Columns
Angular Greek Ionic
Angular Greek Ionic w/ Necking
Decorative Roman Doric
Empire Empire w/ Necking Greek Erectheum
Greek Erectheum w/ Necking
Modern Composite
Roman Corinthian
Roman Ionic Scamozzi
Temple of Winds
Each Kit Includes: StrapsTube(s) of AdhesiveAluminum Plates#8 11/4 “ ScrewsInstruction Sheetfor 6” to 36” Columns
Fiberglass Column Reassembly Split Kit
Use during installation to secure column shaft in place.
1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [5]
Each Kit Includes:(4) Brackets (2 top; 2 bottom)(10) 2” Stainless Screws(10) Tapcon Screws
see pages 8-9 for details
TuscanCap &
Base/Plinth
Roman DoricCap &
Base/Plinth
ColonyCap &
Base/PlinthAttic
Base/Plinth
[6] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
DuraCast™ rounD tapereD Columns
Full Length & Knee-Wall
DuraCast™ Round Tapered Columns
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.
Column Size
6”8”10”12”14”16”18”20”22”24”26”28”30”36”
Bottom Shaft
DiameterA
55/8
75/8
95/8
115/8
135/8
153/4
171/2
191/2
215/8
235/8
2628
295/8
36
Neck Shaft
DiameterB5
61/2
81/4
911/16
115/8
135/8
153/8
173/16
191/4
211/4
22231/2
261/2
30
BeadK11117/8
111/8
17/16
17/8
23/16
221/8
31/16
2
FluteWidth
L5/16
11/16
7/8
11
11/4
13/8
13/8
13/4
13/4
222
21/2
TopFlute
M11111
11/4
11/4
11/4
11/4
11/4
11/4
11/4
11/4
11/4
BottomFlute
N103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
103/4
No.Flutes
1624242424242424242424242424
Load-Bearing
Capacity*(in lbs.)
8,00010,00014,00018,00020,00020,00020,00020,00020,00020,00020,00020,00020,00020,000
Minimum Wall
Thickness
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
11/4
Cut at Bead Loss
31/2
45
53/4
78
87/8
9101/4
115/16
117/8
113/4
147/8
135/8
Length(in feet)
85’ 6”, 6, 8, 9, 10
5’ 6”, 6, 8, 9, 10, 128, 9, 10, 12, 14, 16, 188, 9, 10, 12, 14, 16, 188, 10, 12, 14, 16, 18, 20
10, 12, 14, 16, 18, 20, 22, 24, 2612, 14, 16, 18, 20, 22, 24
16, 18, 20, 22, 24, 2614, 16, 18, 20, 22, 24, 26, 28, 30
20, 22, 24, 2620, 22, 24, 26, 28
20, 22, 24, 26, 28, 3020, 22, 24, 26, 28, 30
* Load-bearing capacity is dependent on the concentric loading of the column. NOTE: • All DuraCast™ fluted columns have adjustable flutes which can be altered. • Custom sizes are available. Contact Dixie-Pacific™ for more information.
Round Non-Tapered Column
Top View
Inside Diameter
NOTE: • Inside diameter may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”. • Specify shape and size of structural support
Columns to Surround Structural Supports
Column Size
6”8”
10”12”14”16”18”20”22”24”26”28”30”36”
InsideTop ShaftDiameter
P33/4
51/2
71/4
811/16
107/8
127/8
143/8
165/8
181/4
201/4
2122
251/4
28
Full Length & Knee-Wall
for DuraCast™ Round Tapered Columns
custom flutes available
1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [7]
DuraCast™ rounD tapereD Caps & Base/plinths
* Manufactured from polyurethane. ** Manufactured from polyurethane or
Synthetic Injection Molded (SIM). *** Manufactured from fiberglass.
NOTE: • It is not recommended to split Synthetic Injection Molded (SIM) Cap and
Base/Plinth sets for reassembly.• Tuscan (SIM) Cap and Base/Plinth components can only be purchased as a set.• Tuscan cast fiberglass Base/Plinths are available for 8”-14”.
Tuscan Cap & Base/Plinth
Full Length & Knee-Wall Full Length & Knee-Wall
Roman Doric Cap & Base/Plinth
Attic Base/Plinth
Full Length & Knee-Wall
Colony Cap & Base/Plinth
Full Length & Knee-Wall
NOTE:• It is not recommended to split Synthetic Injection Molded (SIM) Cap and
Base/Plinth sets for reassembly. • Colony (SIM) Cap and Base/Plinth components can only be purchased as a set.
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions. NOTE:
• Tuscan Cap and Base/Plinth are standard components for DuraCast™ Columns.• All Caps and Base/Plinths are non-vented. • All Caps and Base/Plinths are sold separately from the column.
Plinth Cap SquareColumn Size
6” *8” **10” **12” *
BaseMold
E11/2
11/2
11/2
11/2
Cap Round
H5/8
11/8
11/8
11/8
WidthC
71/4
93/4
113/4
131/8
HeightD
13/8
11/4
13/8
11/2
WidthF
71/2
91/2
111/2
13
HeightG1
13/8
17/16
11/2
Column Size
6” *8” *
10” *12” *14” *16” *18” *20” *22” *24” *
26” ***28” ***30” *
36” ***
WidthC
85/16
101/8
13161/8
191/4
213/4
25275/8
301/4
331/2
3538
411/4
483/4
HeightD
13/8
17/8
21/2
333/8 4
43/8
51/8
53/8
661/4
63/4
61/2
83/4
BaseMold
E23/4
31/4
37/8
41/2
53/8
61/2
71/4
81/2
91/4
101/4 105/8
113/8
111/4
143/4
Plinth
Plinth Cap SquareColumn Size
6” *8” *
10” *12” *14” *16” *18” *
20” ***22” ***24” ***26” ***28” ***30” ***36” ***
WidthC
81/2
103/8
1215/16
151/2
181/8
207/8
231/4
27293/4
321/2
3538
401/2
483/4
HeightD
11/2
17/8
23/8
27/8
315/16
33/4
443/4
51/4
53/4
61/4
63/4
71/4
83/4
BaseMold
E13/4
21/2
33/16
37/8
47/16
51/4
661/4
63/4
71/2
81/8
85/8
93/8
111/4
WidthF8
93/4
121/2
143/4
171/2
201/2
231/8
25273/8
293/4
321/2
345/8
37441/8
HeightG
11/8
11/2
13/4
23/8
23/8
23/4
34
43/8
41/2
51/8
51/2
57/8
7
Cap Round
H7/8
11/8
13/8
15/8
113/16
19/16
13/4
23/4
331/4
31/2
37/8
41/8
5
Column Size
6” *8” **10” **12” **14” *16” *18” *20” *22” *24” *
26” ***28” ***30” *
36” ***
Plinth BaseMold
E17/8
21/2
27/8
31/4
41/4
45/8
55/8
61/2
67/8
77/16
83/8
83/4
83/8
113/8
Cap Square Cap Round
H5/8
11/8
11/4
11/2
221/4
23/4
27/8
331/2
331/4
441/4
WidthC9
101/2
131/8
161/2
191/2
221/8
245/8
27301/4
331/2
3538
411/8
483/4
HeightD
17/16
17/8
23/8
27/8
33/8
44
43/4
53/8
57/8
61/4
63/4
61/2
83/4
WidthF
71/2
91/2
1115/16
143/8
17193/4
223/8
2415/16
271/2
301/2
311/2
333/8
381/4
423/4
HeightG1
13/8
17/8
21/8
27/8
331/8
33/8
33/4
41/16
43/8
43/4
45/8
61/4
[8] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
Angular Greek IonicColumn
Size
6”10”12”14”18”20”
Diameter51/2
81/2
101/2
121/2
16181/4
Height33/8
51/2
61/8
71/4
10111/4
Abacus73/4
141/2
171/4
201/2
241/8
30
Dimensions*
DeCorative Capitals for DuraCast™ rounD tapereD Columns
Angular Greek Ionicwith Necking**
ColumnSize
6”8”
10”12”22”
Diameter51/2
65/8
81/2
101/2
181/4
Height63/4
73/4
10
113/8
171/4
Abacus73/4
91/4
141/2
171/4
30
Dimensions*
Decorative Roman DoricColumn
Size
8”10”12”
Diameter6
81/4
10
Height47/8
63/8
71/2
Abacus105/8
14161/4
Dimensions*
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.NOTE:
• 8” - 12” Decorative Capitals are load bearing (unless split) and manufactured from lightweight polyurethane.• 14” - 30” Decorative Capitals are non-load bearing (requires plug) and manufactured from lightweight polyurethane.• Specify shape and size of structural support if Decorative Capitals are split for reassembly. The inside diameter of the
Decorative Capital is significantly smaller than the inside top diameter of the column shaft.• All Decorative Capitals are sold separately from the column. *All dimensions are approximate.**Necking detail may vary.
EmpireColumn
Size
6”10”12”16”18”20”24”
Diameter51/2
93/8
11135/8
161/2
181/2
22
Height31/2
51/2
61/2
81/8
10111/2
131/8
Abacus91/2
141/8
181/4
211/4
32323/4
36
Dimensions*
Empire with Necking**Column
Size
6”8”
10”12”16”20”24”
Diameter51/2
63/4
81/2
101/4
135/8
161/2
20
Height78
103/8
111/4
171/4
171/2
191/8
Abacus91/2
101/2
131/4
173/4
211/4
3233
Dimensions*
Greek ErectheumColumn
Size
8”10”12”14”16”18”20”24”
Diameter79
103/4
123/4
141/2
161/2
1822
Height41/2
55/8
61/2
785/8
10111/8
131/8
Abacus93/8
131/8
141/4
161/4
18211/4
261/4
31
Dimensions*
Cutting Columns at Bead/AstragalAll DuraCast™ Round Tapered Fiberglass Columns used with Decorative Capitals should be cut flush above the bead.
The Decorative Capital should rest on the top of the bead to allow for the proper fit on the column. The cut at bead loss and the Decorative Capital height must be taken into consideration when ordering columns. A column used with a short Decorative Capital may require a longer shaft.
1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [9]
ColumnSize
6”8”10”12”14”16”18”20”22”24”
Diameter61/4
71/2
9103/8
121416
181/2
201/2
201/2
Height25/8
31/2
41/4
41/2
563/8
61/2
991/2
91/2
Abacus71/2
91/2
111/2
123/4
161/2
171/4
211/4
25251/8
251/8
Dimensions*
Roman Ionic
Greek Erectheum with Necking**Column
Size
8”10”12”16”18”20”24”
Diameter61/2
83/8
10123/4
141/2
1820
Height55/8
81/4
91/2
101/2
127/8
165/8
171/8
Abacus71/2
101/2
141/4
161/4
18261/4
27
Dimensions*
ColumnSize
6”10”12”14”16”
Diameter53/4
81/2
101/2
1214
Height81/2
111/2
141/2
17181/2
Abacus103/4
161/4
19193/4
203/4
Dimensions*
Modern CompositeColumn
Size
6”8”10”12”14”16”18”20”22”24”28”30”
Diameter51/4
781/2
95/8
11127/8
15171/4
181/2
202526
Roman Corinthian
ColumnSize
6”8”
10”12”14”16”18”20”22”24”28”30”
Diameter53/4
71/2
911121416
173/4
20222526
Height27/8
35/8
41/4
51/8
55/8
71/2
71/2
81/2
91/4
105/8
123/4
151/4
Abacus81/2
131/2
141/2
161/2
183/4
22243/4
281/2
301/2
321/4
381/2
461/4
Dimensions* ColumnSize
6”8”10”12”14”16”18”20”22”24”28”
Diameter53/4
61/2
9103/8
111/2
141518
191/4
191/2
24
Scamozzi Temple of Winds
Height71/4
83/4
113/8
14151/8
171/8
173/4
251/4
281/2
281/2
3436
Abacus10
121/4
15 193/4
193/4
221/2
251/4
3941424648
Dimensions*
Height7
73/4
111/4
111/2
1417
185/8
211/2
241/8
23261/8
Abacus83/4
101/2
151/4
17211/2
231/4
27273/4
35353/4
371/4
Dimensions*
DeCorative Capitals for DuraCast™ rounD tapereD Columns
Round Non-Tapered Column
NOTE: • Inside diameter may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”.
• Specify shape and size of structural support.
DuraCast™ rounD non-tapereD Columns
[10] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
* Load-bearing capacity is dependent on the concentric loading of the column. NOTE: • All DuraCast™ fluted columns have adjustable flutes which can be altered. • Beads are sold separately. • Custom sizes are available. Contact Dixie-Pacific™ for more information.
Column Size
8”10”12”14”16”18”24”
Bottom Shaft
DiameterA
75/8
95/8
115/8
135/8
153/4
171/2
24
NeckShaft
DiameterB
75/8
95/8
115/8
135/8
153/4
171/2
24
Bead(Applied)
K111
7/8
111/8
13/4
FluteWidth
L11/16
7/8
11
11/4
13/8
13/4
TopFlute
M1111
11/4
11/4
11/4
BottomFlute
N103/4
103/4
103/4
103/4
103/4
103/4
103/4
No.Flutes
24242424242424
Load-Bearing
Capacity*(in lbs.)
10,00014,00018,00020,00020,00020,00020,000
Minimum Wall
Thickness
3/8
3/8
3/8
1/2
1/2
1/2
5/8
Length(in feet)
6, 8, 9, 10 6, 8, 9, 10, 126, 8, 9, 10, 12
6, 8, 9, 10, 12, 146, 8, 9, 10, 12, 14, 16, 18, 206, 8, 9, 10, 12, 14, 16, 18, 206, 8, 9, 10, 12, 14, 16, 18, 20
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.
DuraCast™ Round Non-Tapered Columns
Columns to Surround Structural Supports
Column Size
8”10”12”14”16”18”24”
InsideTop ShaftDiameter
P67/8
87/8
107/8
127/8
15163/8
21
for DuraCast™ Round Non-Tapered Columns
Full Length & Knee-Wall
Fluted ColumnRound Non-Tapered
Full Length & Knee-Wall
Top View
Inside Diameter
Column Size
8” *10” *12” *14” *16” *18” *24” *
Plinth BaseMold
E21/2
27/8
31/4
41/4
45/8
55/8
77/16
Cap Square Cap Round
H11/4
11/4
13/4
2 21/4
23/4
31/4
WidthC
101/2
131/8
161/2
191/2
221/8
245/8
331/2
HeightD
17/8
23/8
27/8
33/8
44
57/8
WidthF
105/8
1213/16
157/8
191/8
22 245/8
333/8
HeightG
11/2
13/4
21/4
27/8
3 31/8
43/4
Tuscan Cap & Base/Plinthfor DuraCast™ Round Non-Tapered Columns
Full Length & Knee-Wall
* Manufactured from polyurethane. NOTE:
• Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns.• All Caps and Base/Plinths are non-vented.• All Caps and Base/Plinths are sold separately from the column.
custom flutes available
Bead is adjustable and is applied in
the field.
Columns to Surround Structural Supports
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.
Round Barrel Column
Round Barrel Column
NOTE: • Inside diameter may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”.
• Specify shape and size of structural support.
1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [11]
DuraCast™ rounD Barrel Columns
Bottom Shaft
DiameterA
93/16
Neck Shaft
DiameterB
101/8
Column Size
10”
Load-Bearing
Capacity*(in lbs.)
10,000
Minimum Wall
Thickness
1 3/8
Length(in feet)
8, 10
Middle Shaft
Diameter
12
BeadK1
* Load-bearing capacity is dependent on the concentric loading of the column. NOTE:• Second story balconies should not be attached directly to the side of any DuraCast™ Round Barrel column, contact Dixie-Pacific™ for recommendations.• Custom sizes are available. Contact Dixie-Pacific™ for more information.
DuraCast™ Round Barrel ColumnsFull Length
InsideTop ShaftDiameter
P71/2
Column Size
10”
Full Length
for DuraCast™ Round Barrel Columns
Top View
Inside Diameter
Column Size
10” *
PlinthBaseMold
E3
Cap Square Cap Round
H11/2
WidthC
123/4
HeightD
21/2
WidthF
143/4
HeightG
21/4
Tuscan Cap & Base/Plinthfor DuraCast™ Round Barrel Columns
Full Length
* Manufactured from polyurethane. NOTE:
• Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns.• All Caps and Base/Plinths are non-vented.• All Caps and Base/Plinths are sold separately from the column.
* Load-bearing capacity is dependent on the concentric loading of the column. ** 12” x 10” x 10’ and 14” x 12” x 9’ have a one-third to two-third taper. Trimming more than one-third from the bottom will result in bases not fitting properly.NOTE:
• Second story balconies should not be attached directly to the side of any DuraCast™ Square column, contact Dixie-Pacific™ for recommendations.• Bead is shipped with shaft and applied in the field. • Custom sizes are available. Contact Dixie-Pacific™ for more information.
Square Tapered
NOTE: • Inside width may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”.
• Specify shape and size of structural support.
[12] DuraCast™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
DuraCast™ square tapereD ColumnsMeasurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.
Bottom Shaft Width
A10
101/4
121416
Top Shaft Width
B51/2
71/2
10 129
Column Size
10”101/4”12”14”16”
Bead(Applied)
K11111
Load-Bearing
Capacity*(in lbs.)
10,00010,00014,00014,00014,000
Minimum Wall
Thickness
13/8
1 3/8
1 3/8
1 3/8
1 3/8
Length(in feet)
5’6” 7
6, 10**9**
4’10”, 6, 8
DuraCast™ Square Tapered Columns Full Length & Knee-Wall
Columns to Surround Structural Supportsfor DuraCast™ Square Tapered Columns
InsideTop Shaft
WidthP
41/2
41/2
988
Column Size
10”101/4”12”14”16”
Full Length & Knee-Wall
Top View
Inside Width
Full Length & Knee-Wall
Column Size
10”*10 1/4”*
12”*14”*
16” x 4’ 10”*16” x 6’ & 16” x 8’*
Plinth BaseMold
E37/16
339/16
439/16
39/16
Cap Square Cap Round
H13/8
113/8
15/8
13/8
13/8
WidthC13
131/2
169/16
183/4
183/4
191/16
HeightD
21/2
23/8
21/2
33/8
21/2
21/2
WidthF
95/8
101/4
123/4
171/8
131/4
131/4
HeightG
13/8
113/8
23/8
13/8
13/8
Tuscan Cap & Base/Plinthfor DuraCast™ Square Tapered Columns
* Manufactured from polyurethane. NOTE:
• Tuscan Cap and Base/Plinth are the standard components for DuraCast™ Columns.• All Caps and Base/Plinths are non-vented.• All Caps and Base/Plinths are sold separately from the column.
Bead is adjustable and is applied in
the field.
DuraCast Square Columns
1.800.468.5993 www.dixiepacific.com DuraCast™ Fiberglass Columns [13]
DuraCast™ Columns
SquareNon-Tapered
Plain
SquareNon-Tapered
Knee-WallPlain
SquareNon-Tapered
Knee-WallFluted
SquareNon-Tapered
Fluted
SquareNon-Tapered
Recessed Panel (1)
SquareNon-Tapered
Recessed Panel (2)
SquareNon-Tapered
Recessed Panel (3)
SquareNon-Tapered
Knee-WallRecessed Panel (1)
[14] www.dixiepacific.com 1.800.468.5993
DuraLite™ Fiberglass Columns
DuraLite™ Column Features:Square• Plain, Fluted or Recessed Panel Designs• Lightweight• Low Maintenance• Can be Trimmed to Any Height• Durable• Decay Resistant• Load Bearing• Decorative Capitals Available• Limited Lifetime Warranty•
Sometimes, an application calls for a column with a little edge. Which is where Dixie-Pacific’s™ DuraLite™ Square Fiberglass Columns come in. Not only do they offer strength,
beauty and versatility, they are cost effective, as well. Available in a wide array of styles, they are easy to install because of their lightweight shaft and synthetic cap, bead and base/plinth. They require very little maintenance, are extremely durable and are load bearing.
Choose from a plain shaft, fluted shaft or three styles of recessed panels – a single panel, two-panel or three-panel option. Any of the DuraLite™ styles offer traditional elegance and an intriguing artistic touch. Because these columns are can be trimmed to any height, they offer maximum flexibility – easily adapted for pedestal applications or room dividers.
Choosing the Right DuraLite™ Column1. Choose the column style:
plain, fluted or recessed panel2. Choose the appropriate column size.
See Smart Size Ordering information on page 3 to determine the correct size for your application
3. Select the appropriate cap and base/plinth,and determine if you want a beautifully detailed Decorative Capital
DuraLite™ Fiberglass Column Styles
E F G H K
1.800.468.5993 www.dixiepacific.com DuraLite™ Fiberglass Columns [15]
Fiberglass Column Installation Kit
Each Kit Includes: StrapsTube(s) of AdhesiveAluminum Plates#8 11/4 “ ScrewsInstruction Sheetfor 6” to 12” Columns
Fiberglass Column Reassembly Split Kit
Use during installation to secure column shaft in place.
Each Kit Includes:(4) Brackets (2 top; 2 bottom)(10) 2” Stainless Screws(10) Tapcon Screws
see page 19 for details
Plan Types for Split DuraLite™ Columns
Decorative Capitals for DuraLite™ Columns
Caps & Base/Plinths for DuraLite™ Columns
Angular Greek Ionic
Tuscan Cap &Base/Plinth
Colony Cap &Base/Plinth
AtticBase/Plinth
CraftsmanBase
Empire Greek Erectheum
Roman Corinthian
Roman Ionic Scamozzi
Temple of Winds
M
N
A
BL
K
Full Length & Knee-Wall (Plain)
[16] DuraLite™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
Inside Width
Bottom Shaft Width
A51/2
71/2
91/2
111/2
Neck Shaft Width
B51/2
71/2
91/2
111/2
Column Size
6”8”
10”12”
Column Size
8”10”
Bottom Shaft Width
A71/2
91/2
Neck Shaft Width
B71/2
91/2
Bead(Applied)
K1111
Bead(Applied)
K11
Load-Bearing
Capacity*(in lbs.)
5,0006,5007,0007,500
Minimum Wall
Thickness
1/8
1/8
1/8
1/8
TotalFlute
Width**L
51/16
55/8
TopFluteInsert
M89
BottomFluteInsert
N89
TotalNo.
Flutes
2828
Load-Bearing
Capacity*(in lbs.)
6,5007,000
Minimum Wall
Thickness
1/8
1/8
Length(in feet)
6, 8, 9,106, 8, 9, 10, 126, 8, 9, 10, 126, 8, 9, 10, 12
Measurements in inches unless otherwise noted. There may be a variance of up to 1/8” in all dimensions.
Length(in feet)
6, 8, 9, 10, 126, 8, 9, 10, 12
Duralite™ square non-tapereD Columns
DuraLite™ Square Non-Tapered Columns
Full Length & Knee-Wall (Fluted)
No.Flutes
per Face
77
Square Non-Tapered
Columns to Surround Structural Supportsfor DuraLite™ Square Non-Tapered Columns
* Load-bearing capacity is dependent on the concentric loading of the column. **Total flute width includes the total width of all seven flutes. NOTE: •Second story balconies cannot be attached directly to the side of any DuraLite™ Square column, contact Dixie-Pacific™ for
recommendations. •Bead is shipped with shaft and applied in the field. •Each DuraLite™ fluted column will include four top flute insert pieces and four bottom flute insert pieces.
InsideTop Shaft
WidthP
51/4
71/4
91/4
111/4
57/8
73/4
Column Size
6”8”
10”12”
8”10”
Full Length & Knee-Wall
Fluted
Plain
Top View
Inside Width
NOTE: • Inside width may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”.
• Specify shape and size of structural support.Bead is adjustable and is applied in
the field.
P
ColumnRecessed Panel1.800.468.5993 www.dixiepacific.com DuraLite™ Fiberglass Columns [17]
Column Size
8”10”
Bottom Shaft Width
A71/2
91/2
Neck Shaft Width
B71/2
91/2
Bead(Applied)
K11
PanelWidth
L47/8
55/16
TopInsert
M89
BottomInsert
N89
Load-Bearing
Capacity*(in lbs.)
6,5007,000
Minimum Wall
Thickness
1/8
1/8
Length(in feet)
6, 8, 9, 10, 126, 8, 9, 10, 12
DuraLite™ Square Non-Tapered Recessed Panel Columns Full Length & Knee-Wall
* Load-bearing capacity is dependent on the concentric loading of the column. NOTE: •Second story balconies cannot be attached directly to the side of any DuraLite™ Square column, contact
Dixie-Pacific™ for recommendations. •Bead is shipped with shaft and applied in the field. •Each DuraLite™ Recessed Panel column will include four top panel insert pieces and four bottom panel
insert pieces.
Kit Size
8” Panel Divider Kit(4 pieces)
10” Panel Divider Kit(4 pieces)
Height
21/4
37/8
Width
47/8
55/16
for DuraLite™ Square Recessed Panel Columns Columns to Surround Structural Supports
DuraLite™ Panel Divider Kitsto convert a single panel Column into a 2- or 3-panel Column
NOTE: • Each Panel Divider Kit includes four pieces. One Panel
Divider Kit is needed to achieve a 2-panel column and Two Panel Divider Kits are needed to achieve a 3-panel column.
• Panel Divider Kits are sold separately from the column.
Duralite™ square non-tapereD reCesseD panel Columns
InsideTop Shaft
WidthP
53/4
8
Column Size
8”10”
Full Length & Knee-Wall
Full Length & Knee-Wall
NOTE: • Inside width may vary up to 1/8”. These columns allow for saw kerf as columns are split. Columns that are split are non-load-bearing. Splitting a column will decrease inside dimension 1/8”.
• Specify shape and size of structural
support.
Measurements in inches unless otherwise noted. There may be a variance of up to 1/8” in all dimensions.
Panel Insert
Kit
Panel Insert
Kit
Panel Divider Kits
(Sold Separately)
1 Panel 2 Panel 3 Panel
Inside Width
Bead is adjustable and is applied in
the field.
[18] DuraLite™ Fiberglass Columns www.dixiepacific.com 1.800.468.5993
Colony Cap & Base/Plinth Craftsman
Base
* Manufactured from polyurethane. ** Manufactured from polyurethane or Synthetic Injection Molded (SIM).
K
Duralite cap, base/plinth & bead
H
G
E
D
C
F
K
Duralite cap, base/plinth & bead
H
G
E
D
C
F
Duralite™ square non-tapereD Caps & Base/plinthsMeasurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.NOTE:
• Tuscan Cap and Base/Plinth are standard components for DuraLite™ Columns.• All Caps and Base/Plinths are non-vented.• All Caps and Base/Plinths are sold separately from the column.
Tuscan Cap & Base/Plinth Attic
Base/Plinth
Column Size
8” *10” *12” *
WidthC
101/4
123/4
155/16
HeightD
11/4
13/4
115/16
BaseMold
E31/4
41/8
47/8
Column Size
6” *8” **10” **12” *
Plinth BaseMold
E13/4
23/8
27/8
31/4
Cap Round
H 7/8 1
11/4
13/8
Cap Round
H 1/2 11/4
11/2
WidthC
81/2
103/8
13151/4
HeightD
11/2
17/8
23/8
23/4
WidthF8
101/8
123/4
157/8
HeightG
11/16
13/8
13/4
2
PlinthCap Square
Plinth Cap SquareColumn Size
6” *8” *10” *
BaseMold
E11/2
11/2
11/2
WidthC
71/4
91/2
111/2
HeightD
11/4
11/4
11/4
WidthF
73/4
101/4
121/4
HeightG1
11/2
11/2
Column Size
8” *10” *
WidthC
91/4
111/4
HeightD88
Base
Full Length & Knee-WallFull Length & Knee-Wall
Full Length & Knee-WallFull Length & Knee-Wall
Note: • It is not recommended to split Synthetic Injection Molded (SIM) Cap and Base/Plinth sets for reassembly.
• Tuscan (SIM) Cap and Base/Plinth components can only be purchased as a set.
1.800.468.5993 www.dixiepacific.com DuraLite™ Fiberglass Columns [19]
DeCorative Capitals for Duralite™ square non-tapereD Columns
Angular Greek IonicColumn
Size8”
Width
8Height
51/4
Abacus
131/4
Dimensions*
Empire
ColumnSize12”
Width
121/2
Height
71/4
Abacus
201/2
Dimensions* ColumnSize8”10”
Width
81/2
93/4
Height
51/4
6
Abacus
11121/4
Dimensions*
Greek Erectheum
Temple of WindsRoman Ionic
ColumnSize8”10”12”
ColumnSize8”
10”12”
ColumnSize8”10”12”
ColumnSize8”10”12”
Width
81/2
10121/2
Width
71/2
101/2
12
Width
81/4
10121/4
Width
81/4
101/4
111/2
Height
111/2
143/4
171/2
Height
35/8
45/8
5
Height
33/4
553/4
Height
10113/8
141/4
Abacus
145/8 20
223/4
Abacus
91/2 13
163/4
Abacus
141/4 161/2
183/4
Abacus
1417
211/2
Dimensions* Dimensions* Dimensions* Dimensions*
Scamozzi
Measurements in inches unless otherwise noted. There may be a variance of up to 1/4” in all dimensions.NOTE:
Decorative Capitals are load bearing (unless split) and manufactured from lightweight polyurethane. •Specify shape and size of structural support if Decorative Capitals are split for reassembly. The inside •diameter of the Decorative Capital is significantly smaller than the inside top width of the column shaft.All Decorative Capitals are sold separately from the column. •
*All dimensions are approximate.
Roman Corinthian
Top Related