C O R P O R A T I O Nhttp://www.stngco.come-mail:[email protected]
22000088OOrrtthhoottiiccss
22000088PPrroosstthheettiiccss
2008PRODUCT
INFORMATION
ST-41
www.ww stngco.com
for USA only
CONTENTS
Prosthetics
3. Lower Extremity Orthotics
04 AFO Ankle Joints
2. Upper Extremity Orthotics
03 Cervical Collars
1. Spinal Orthotics
01 Orthoform System etc.
Orthotics
17 450lbs & 500lbs System
16 375lbs System
14 Double Ended Adapters
11 Rotating Bases & Pyramids
09 Connectors
07 Tube Clamps
7. Replacement Parts
28 Replacement Parts
6. Suspension Systems
27 Locks
26 Liners
4. BK Kits
19 Heavy Duty BK Kits
18 Ti, SS & Al BK Kits
3. Adapters
06 Tube Clamp Assemblies
05 Aluminum Tubes
5. Knee & Hip Joints
25 Hip Joints
20 Knee Joints
2. Prosthetic Feet
04 Foot Adapters
02 Feet
1. Pediatric Components
01 Pediatric Feet & Adapters
Pediatric 4 Ear Connector
Pediatric Tube Clamp
Pediatric Tube ClampAssembly
Pediatric Foot Adapter
Pediatric SACH Foot
Pediatric Components
This foot is designed for use with a modular adapter P231A.
55kgAluminum / Stainless SteelP220A
P/N Material Weight Limit
55kgAluminumP212A
P/N Material Weight Limit
55kgAluminumP211A
P/N Material Weight Limit
55kgAluminum / Stainless SteelP231A
P/N Material Weight Limit
50kg60kg80kg
15cm17cm19cm
Left, RightLeft, RightLeft, Right
1105=151105=171105=19
P/N Side Size Weight Limit
P-01
* Replacement Parts
Connection Cap for 1101 Single Axis Feet1101-1DescriptionP/N
P28.
P-02
100kgLeft, Right1102 = 21 thru 30P/N Side Weight Limit
100kgLeft, Right1101 = 21 thru 30P/N Side Weight Limit
Prosthetic Feet
SACH Foot
Single Axis Foot
The single axis foot is to be used with single axis ankle joints (1232T, 1232S,1232A, 1233T, 1233S, 1233A).This product has a 1 year warranty.
Internal heel wedge provides soft heel strike. This product has a 1 year warranty.
Sizes : 22, 23, 24, 25, 26, 27, 28
P-03
KES8L22-160
KES8R22-160
KES8L23-160
KES8R23-160
KES8L24-160
KES8R24-160
KES8L25-160
KES8R25-160
KES8L26-160
KES8R26-160
KES8L27-160
KES8R27-160
KES8L28-160
KES8R28-160
KES8L22-130
KES8R22-130
KES8L23-130
KES8R23-130
KES8L24-130
KES8R24-130
KES8L25-130
KES8R25-130
22 Left
22 Right
23 Left
23 Right
24 Left
24 Right
25 Left
25 Right
26 Left
26 Right
27 Left
27 Right
28 Left
28 Right
SizeWeight Limit
60 kgWeight Limit
72.5 kg
The ES dynamic foot brings high-tech performance to lower cost foot. The combination of composite foot plate material anddesign embedded inside the foot foam with integrated pyramid provides optimum flexibility and toe response. The designallows for soft heel cushion with smooth rollover and good toe response. The soft foam provides the cushion at heel and butthe durable outer sole material protects the foam from tearing with the high spring tension of the composite foot plate at thetoe section. This product has a 1 year warranty.
Prosthetic Feet
ES Dynamic Foot
Weight Limit: 220 lbs / 100kgIntegrated pyramid adapter
Top plate compression at mid stance providessmooth rollover
Soft foam andhigh heel cushion
Composite keel - long spring lever provides optimumenergy return at toe off
Special outer sole integrated tothe soft foot foam prevents springkeel from breaking through the sole
Heel compressionof the foot foam
Top platecompresses
closer towardthe spring
Flexible springcomposite keel
for energy return
Part Numbers:
Weight Limit85 kg
Weight Limit100 kg
KES8L22-190
KES8R22-190
KES8L23-190
KES8R23-190
KES8L24-190
KES8R24-190
KES8L25-190
KES8R25-190
KES8L26-190
KES8R26-190
KES8L27-190
KES8R27-190
KES8L28-190
KES8R28-190
KES8L23-220
KES8R23-220
KES8L24-220
KES8R24-220
KES8L25-220
KES8R25-220
KES8L26-220
KES8R26-220
KES8L27-220
KES8R27-220
KES8L28-220
KES8R28-220
* Replacement Parts
Single Component Pack for Single Axis Feet1232-1DescriptionP/N
P29.
Included in delivery : 1 lower joint bushing, 1 rubberbumper, 2 nuts, 1 anti rotation bridge.
P-04
100kg100kg100kg100kg90kg90kg
Weight Limit
197g203g305g317g223g227g
TitaniumTitaniumStainless SteelStainless SteelAluminumAluminum
SmallLargeSmallLargeSmallLarge
Size
1232T1233T1232S1233S1232A1233A
P/N Material Product Weight
136kg125kg114kg
Weight Limit
80g112g105g
TitaniumStainless SteelAluminum
1231T1231S1231A
P/N Material Product Weight
Prosthetic Feet
Single Axis Foot Adapter
SACH Foot Adapter
Titanium SACH Foot AdapterThe titanium foot adapter has a shorter flange providing better strength withreducing weight. The 1231T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.A foot bolt is provided with every adapter. This product has a 2 year warranty.
Stainless Steel SACH Foot AdapterThe stainless steel foot adapter is manufactured with high strength stainless steelalloy providing for a high quality and strong product. A foot bolt is providedwith every adapter. This product has a 2 year warranty.
Aluminum SACH Foot AdapterThe aluminum foot adapter is manufactured by a forged and machinedcombination providing for a high quality and strong product. The flange ismanufactured with stainless steel to reduce fatigue at the attachment site.A foot bolt is provided with every adapter. This product has a 2 year warranty.
Titanium Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.
Stainless Steel Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.
Aluminum Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.
* Replacement Parts
Bolt for SACH Foot Adapter1231-1DescriptionP/N
P29.
Included in delivery : 1 cap screw, 1 washer
P-05
227g538g
Product Weight
136kg114kg
Weight Limit
385mm910mm
AluminumAluminum
1209A1210A
P/N Material Length
Adapters
Aluminum Tube
Aluminum 385mm TubeThe 1209A aluminum tube has a diameter of 30mm and length of 385mm.It is extruded and shot peened for an optimum strength. It can be cut to lengthfor use. This product has a 1 year warranty.
Aluminum 910mm TubeThe 1210A aluminum tube has a diameter of 30mm and length of 910mm.It is extruded and shot peened for an optimum strength. It can be cut to lengthfor use. This product has a 1 year warranty.
136kg114kg114kg90kg90kg
136kg
Weight Limit
306g344g307g201g320g232g
TitaniumStainless SteelAluminumMolded SSMolded SSTitanium/Aluminum
1211T1211S1211A1211MS - 2001211MS - 4001241T
P/N Material Product Weight
Titanium Tube Clamp AssemblyThe titanium fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The titanium adapter is forged and machinedwhile the aluminum tube is extruded and shot peened for an optimum fatiguestrength. This combination creates a high quality, durable and strong component.This product has a 2 year warranty.
Stainless Steel Tube Clamp AssemblyThe stainless fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The stainless steel adapter is made of highstrength stainless steel alloy while the aluminum tube is extruded and shot peenedfor an optimum fatigue strength. This combination creates a high quality, durableand strong component. This product has a 2 year warranty.
Aluminum Tube Clamp AssemblyThe aluminum fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The aluminum adapter is forged and machinedwhile the aluminum tube is extruded and shot peened for an optimum fatiguestrength. This combination creates a high quality, durable and strong component.This product has a 2 year warranty.
Molded Stainless Steel Tube Clamp AssemblyThe molded stainless steel fixed adapter with 30mm aluminum tube comes intwo length 200mm and 400mm. This product has a 1 year warranty.
⑤ Low Profile Tube Clamp AssemblyThe low profile titanium fixed adapter with 30mm aluminum tube has a permanentadapter at one end. It can be cut to length. The titanium adapter is forged andmachined while the aluminum tube with 223mm is extruded and shot peened for anoptimum fatigue strength. This combination creates a high quality, durable andstrong component. This product has a 2 year warranty.
⑤
Adapters
Tube ClampAssembly
P-06
NNEEWW!!
136kg
Weight Limit
98gTitanium1222T
P/N Material Product Weight
136kg125kg114kg90kg
Weight Limit
79g128g83g
117g
TitaniumStainless SteelAluminumMolded SS
1212T1212S1212A1212MS
P/N Material Product Weight
Adapters
Offset Tube Clamp
Tube Clamp
Titanium Tube ClampThe titanium 30mm tube clamp adapter is designed for an optimum strength whilemaintaining low weight. A forged and machined combination provides a highquality and strong product. This product has a 2 year warranty.
Stainless Steel Tube ClampThe stainless steel 30mm tube clamp adapter is made of high strength stainlesssteel alloys providing a strong and durable component. This product has a 2 yearwarranty.
Aluminum Tube ClampThe aluminum 30mm tube clamp adapter is made of high strength aluminumalloys. This tube clamp is manufactured by a forged and machined combinationproviding for a high quality and strong product. This product has a 2 yearwarranty.
Molded Stainless Steel Econo Tube ClampThe molded stainless steel 30mm econo tube clamp adapter is designed for costeffective application. This product has a 1 year warranty.
The titanium 30mm offset tube clamp is used when extra alignment is needed.It is also ideal when using a pin suspension lock, where prosthetic and pinalignment can be easily adjusted using the offset clamp. This versatile clampdesign also provides an offset position that can be rotated 360 degrees. Thisproduct has a 2 year warranty.
P-07
Weight LimitP/N Material Product Weight
100kg95gStainless Steel1252S100kg62gTitanium1252T
Tube Clamp w/Pyramid
Titanium Tube Clamp w/PyramidThe titanium 30mm tube adapter w/pyramid is designed for an option strengthwhile maintaining low weight. High strength titanium provides a high quality andstrong product. This product has 2 year warranty.
Stainless Steel Tube Clamp w/PyramidThe stainless steel 30mm tube clamp w/pyramid is made of high strengthstainless steel alloys providing a strong and durable component.This product has 2 year warranty.
100kg
Weight Limit
86gTitanium1213T
P/N Material Product Weight
100kg
Weight Limit
185gTitanium1219T
P/N Material Product Weight
Sliding Tube Clamp
Adapters
10 Degree Angled Tube Clamp
The 10-degree titanium angled adapter is used often with hip disarticulationsystem. The 10-degree angle tilt helps at times with alignment associated withhip disarticulation system and as well as transfemoral and transtibial alignmentsituation. This product has a 2 year warranty.
The titanium 30mm sliding tube clamp adapter permits additional slidingadjustment between the prosthetic socket and tube adapter, even as the prosthesisis being worn.The sliding adjustment allows for fine tuning in any desired parallelposition of the distal portion, independent of the angle of adjustment through thepyramid.This product has a 2 year warranty.
P-08
NEW!
P-09
136kg
Weight Limit
53gTitanium1218T
P/N Material Product Weight
159kg
Weight Limit
73gTitanium1227T
P/N Material Product Weight
136kg125kg114kg
Weight Limit
70g111g81g
TitaniumStainless SteelAluminum
1217T1217S1217A
P/N Material Product Weight
Adapters
4 Hole Connector, Receiver
4 Hole Connector, Pyramid
4 Hole Connector w/o Pyramid Hole
Titanium 4 Hole Pyramid Connector, PyramidThe non rotatable 4-hole titanium pyramid adapter attaches to any socket orknee with a distal 4-hole pattern. 4 flat head screws are provided with everypyramid. The 1217T is manufactured by a forged and machined combinationproviding combination providing for a high quality, light weight and strongprooduct. This product has a 2 year warranty.
Stainless Steel 4 Hole Connector, PyramidThe non rotatable 4-hole stainless steel pyramid adapter attaches to any socketor knee with a 4-hole pattern. 4 flat head screws are provided with everypyramid. The 1217S is manufactured from high strength stainless steel alloyproviding for a high quality and strong product. This product has a 2 yearwarranty.
Aluminum 4 Hole Connector, PyramidThe non rotatable 4-hole aluminum pyramid adapter attaches to any socket orknee with a 4-hole pattern. 4 flat head screws are provided with every pyramid.The 1217A is manufactured by a forged and machined combination providingfor a high quality and strong product. This product has a 2 year warranty.
The non rotatable 4-hole titanium connector without pyramid hole attaches toany socket or knee with a distal 4-hole pattern. It comes with 4 flat head screws.It provides more strength than the 1217T. Titanium is forged machined forhigh strength and quality. This product has a 2 year warranty.
The 4-hole connector receiver is used to connect to any 4-hole thread systemand pyramid connection. Used 4 flat head screws to connect to 4-hole connector.4 set screws are used for anchoring the mating pyramid system as well as formaking angular adjustment for alignment. Apply recommended torque toalignment adjustment screws for connection. Apply loctite to all screws once thealignment and connection is finalized. This product has a 2 year warranty.
* Replacement Parts
Lamination Dummy for 4 Ear Connector, PyramidLDDescriptionP/N
P29.
* Replacement Parts
Lamination Dummy for 4 Ear Connector, PyramidLDDescriptionP/N
P29.
P-10
136kg125kg114kg
Weight Limit
55g97g63g
TitaniumStainless SteelAluminum
1220T1220S1220A
P/N Material Product Weight
159kg
Weight Limit
58gTitanium1230T
P/N Material Product Weight
Adapters
4 Ear Connector w/o Pyramid Hole
4 Ear Connector, Pyramid
Titanium 4 Ear Connector, PyramidThe titanium 4-ear connector provides an option for a one step lamination into atranstibial socket. A lamination cover is included with every 4-ear connector.The 1220T is manufactured by a forged and machined combination providing fora high quality, light weight and strong product. This product has a 2 year warranty.
Stainless Steel 4 Ear Connector, PyramidThe stainless steel 4-ear connector provides for a one step lamination into atranstibial socket. A lamination cover is included with every 4-ear connector.The 1220S is manufactured with high strength stainless steel alloy providingfor a high quality and strong product. This product has a 2 year warranty.
Aluminum 4 Ear Connector, PyramidThe aluminum 4-ear connector provides an option for a one step laminationinto a transtibial socket. A lamination cover is included with every 4-earconnector. The 1220A is manufactured by a forged and machined combinationproviding for a high quality and strong product. This product has 2 year warranty.
The 4-ear titanium connector without pyramid hole provides a one steplamination into a transtibial socket. It includes a lamination cover. It providesmore strength than the 1220T. The 1230T is manufactured by a forged andmachined combination providing for a high quality and strength. This product hasa 2 year warranty.
P-11
136kg
Weight Limit
290gFoam1209W
P/N Material Product Weight
Foam Block, 4 Hole Adapter
The foam block is designed to be laminated into a socket, and it's typically usedfor two step lamination process. Socket can be bench aligned onto the foam blockand can be set by using any kind of quick setting glue. Once the alignmentbetween the socket and the foam block is set, trim the foam block as needed andprepare it for second lamination. Any 4 hole adapters with European 4 hole patternwill fit onto the foam block adapter. This product has a 2 year warranty.
136kg
Weight Limit
72gTitanium1214T
P/N Material Product Weight
Adapters
4 Hole Rotating Base
The 4-hole rotating base provides 360 degrees of rotation for pyramid adapteror pyramid receiver. Used with the 1215T or 1216T/S. All attachment screws areprovided with 4-hole base. The 1214T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.This product has a 2 year warranty.
136kg
Weight Limit
116gStainless Steel1221S
P/N Material Product Weight
3 Prong Rotating Base
The 3-prong adapter is used for lamination onto transfemoral socket. The adapterprovides 360 degrees of rotation for pyramid adapter or pyramid receiver. Thisproduct can be used with the 1215T or 1216T/S. The 1221S is manufactured froma high quality and strong product. This product has a 2 year warranty.
P-12
136kg100kg
Weight Limit
158g168g
Titanium + Stainless SteelStainless Steel
12541254S
P/N Material Product Weight
136kg125kg
Weight Limit
164g184g
Titanium + Stainless SteelStainless Steel
12531253S
P/N Material Product Weight
Adapters
3 Prong Rotating Base with Rotating Pyramid
3 Prong Rotating Base with Rotating Receiver
Stainless Steel 3 Prong Rotating Base with Titanium Rotating ReceiverThis 3 prong rotating base with rotating receiver consists of 1221S(3 prong rotating base) and 1216T(rotating receiver). This product has 2 yearwarranty.
Stainless Steel 3 Prong Rotating Base with Stainless Steel Rotating ReceiverThis 3 prong rotating base with rotating receiver consists of 1221S(3 prong rotating base) and 1216S(rotating receiver). This product has 2 yearwarranty.
Stainless Steel 3 Prong Rotating Base with Titanium Rotating PyramidThis 3 prong rotating base with rotating pyramid consists of 1221S(3 prong rotating base) and 1215T(rotating receiver). This product has 2 yearwarranty.
Stainless Steel 3 Prong Rotating Base with Stainless Steel Rotating PyramidThis 3 prong rotating base with rotating pyramid consists of 1221S(3 prong rotating base) and 1215S(rotating receiver). This product has 2 yearwarranty.
100kg
Weight Limit
124gStainless Steel1255S
P/N Material Product Weight
3 Prong Rotating Base with Fixed Pyramid
P-13
136kg125kg
Weight Limit
42g80g
TitaniumStainless Steel
1215T1215S
P/N Material Product Weight
136kg125kg
Weight Limit
48g68g
TitaniumStainless Steel
1216T1216S
P/N Material Product Weight
136kg
Weight Limit
39gTitanium1225T
P/N Material Product Weight
Rotating Pyramid
Titanium Rotating PyramidThe titanium rotating pyramid can be used with 1214T or 1221T/S. The 1215T ismanufactured by a forged and machined combination providing for a high quality,light weight and strong product. This product has a 2 year warranty.
Stainless Steel Rotating PyramidThe stainless steel rotating pyramid can be used with 1214T or 1221T/S. Thisproduct has a 2 year warranty.
Adapters
Rotating Pyramid with Hole
The titanium rotating pyramid with hole can be used with 1214T or 1221T/S.Titanium is forged and machined for a high strength and quality. This producthas a 2 year warranty.
Rotating Receiver
The rotating pyramid receiver can be used with 1214T or 1221T/S. Titanium isforged and machined for a high strength and quality. This product has a 2 yearwarranty.
This 3 prong rotating base with fixed pyramid used for lamination ontotransfemoral socket. This product has 2 year warranty.
P-14
136kg
Weight Limit
128g100mm
Height
32mm45mm60mm75mm
125kg125kg125kg125kg
106g124g134g154g
Stainless SteelStainless SteelStainless SteelStainless Steel
1201S1202S1203S1204S
32mm45mm60mm75mm
Height
Titanium1205T
P/N Material Product Weight
136kg136kg136kg136kg
Weight Limit
88g99g
113g126g
TitaniumTitaniumTitaniumTitanium
1201T1202T1203T1204T
P/N Material Product Weight
Adapters
Tube with Pyramid Receiver
Double Ended Adapter
Titanium tube adapter provides optimum strength and options for low clearancerequirements. This product has a 2 year warranty.
Double Ended AdapterWith pyramid receivers on both ends, these titanium adapters provide excellentadjustability options when clearance is limited. They are available in 32mm,45mm, 60mm and 75mm height. This product has a 2 year warranty.
Double Ended Adapter, 32mmDouble Ended Adapter, 45mmDouble Ended Adapter, 60mmDouble Ended Adapter, 75mm
P-15
32mm45mm60mm75mm
102g112g124g162g
Stainless SteelStainless SteelStainless SteelStainless Steel
32mm45mm60mm75mm
Height
125kg125kg125kg125kg
125kg125kg125kg125kg
Weight Limit
56g68g76g90g
TitaniumTitaniumTitaniumTitanium
1261S1262S1263S1264S
1261T1262T1263T1264T
P/N Material Product Weight
Adapters
Double Ended Adapter w/Pyramid
With pyramid and pyramid receiver on both ends, these titanium/stainless steeladapters provide excellent adjustability options when clearance is limited.They are available in 32mm, 45mm, 60mm and 75mm height.This product has a 2 year warranty.
Double Ended Adapter w/Pyramid, 32mmDouble Ended Adapter w/Pyramid, 45mmDouble Ended Adapter w/Pyramid, 60mmDouble Ended Adapter w/Pyramid, 75mm
NNEEWW!!
Heavy Duty Tube ClampThe heavy duty 30mm tube clamp adapter is designed for an optimum strengthwhile maintaining low weight. A forged and machined combination provides ahigh quality and strong product. This product has a 2 year warranty.
Heavy Duty SACH Foot AdapterThe haby duty foot adapter has a shorter flange providing better strength withreducing weight. The 3231T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.A foot bolt is provided with every adapter. This product has a 2 year warranty.
Heavy Duty 4 Ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one-step lamination intoa transtibial socket. The 3230T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product. Thisproduct has a 2 year warranty.
Heavy Duty Carbon TubeThe 1209C carbon tube has a diameter of 30mm and length of 305mm. Thisproduct has a 2 year warranty.
170kg170kg170kg170kg
Weight Limit
167g99g76g93g
CarbonTitaniumTitaniumTitanium
1209C3212T3230T3231T
P/N Material Product Weight
P-16
375lbs System
Adapters
NNEEWW!!
NNEEWW!!
NNEEWW!!
204kg204kg
Weight Limit
147g127g
TitaniumTitanium
4212T4220T
P/N Material Product Weight
450lbs System
Heavy Duty 4 Ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one-step lamination intoa transtibial socket. The 4220T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product. Thisproduct has a 2 year warranty.
Heavy Duty Tube ClampThe heavy duty 34mm tube clamp adapter is designed for an optimum strengthwhile maintaining low weight. A forged and machined combination provides ahigh quality and strong product. This product has a 2 year warranty.
226kg226kg226kg
Weight Limit
269g167g141g
CarbonTitaniumTitanium
5209C5212T5220T
P/N Material Product Weight
500lbs System
Heavy Duty Tube ClampThe heavy duty 34mm tube clamp adapter is designed for an optimum strengthwhile maintaining low weight. A forged and machined combination provides ahigh quality and strong product. This product has a 2 year warranty.
Heavy Duty 4 Ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one-step lamination intoa transtibial socket. The 5220T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product. Thisproduct has a 2 year warranty.
Heavy Duty Carbon TubeThe 5209C carbon tube has a diameter of 34mm and length of 305mm. Thisproduct has a 2 year warranty.
P-17
Adapters
P-18
BK Kits
114kg
Weight Limit
390gAluminum110A
P/N Material Product Weight
114kg
Weight Limit
472gStainless Steel110S
P/N Material Product Weight
136kg
Weight Limit
385gTitanium110T
P/N Material Product Weight
Aluminum BK Kit
Stainless Steel BK Kit
Titanium BK Kit
Aluminum BK kit consists of 1212A (tube clamp) and1211A (tube clamp assembly).
Stainless steel BK kit consists of 1212S (tube clamp) and1211S (tube clamp assembly).
Titanium BK kit consists of 1212T (tube clamp) and1211T (tube clamp assembly).
P-19
BK Kits
NNEEWW!!
NNEEWW!!
500lbs BK Kit
450lbs BK Kit
375lbs BK Kit
450lbs BK Kit consists of 4212T (tube clamp) x 2 pieces, 4220T(4 ear connector)and 5209C(carbon tube).
500lbs BK Kit consists of 5212T(tube clamp) x 2 pieces, 5220T(4 ear connector)and 5209C(carbon tube).
375lbs BK Kit consists of 3212T (tube clamp) x 2 pieces, 3230T(4 ear connector)and 1209C(carbon tube).
NNEEWW!!
170kg
Weight Limit
441gTitanium/Carbon310T
P/N Material Product Weight
204kg
Weight Limit
690gTitanium/Carbon410T
P/N Material Product Weight
226kg
Weight Limit
744gTitanium/Carbon510T
P/N Material Product Weight
* Replacement Parts
Lanyard for Manual Locking KneeLY13DescriptionP/N
P29.
* Replacement Parts
Extension Assist Kit and Cable for Weight Brake Knee1311-1DescriptionP/N
P29.
P-20
100kg100kg
Weight Limit
362g532g
TitaniumStainless Steel
1311T1311S
P/N Material Product Weight
100kg114kg
Weight Limit
481g719g
TitaniumStainless Steel
1312T1312S
P/N Material Product Weight
90kg
Weight Limit
298gAluminum1313A
P/N Material Product Weight
Knee Joints
Manual Locking Knee - Type A
Mechanical 4 Bar Knee
Weight Activated Brake Knee
The 1311T/S is a stance phase friction brake activated by weight bearing anddesigned for transfemoral amputees with moderate functional demands. It isalso suitable for amputees with lower functional levels who desire to avoidusing a manual locking knee. This product has a 1 year warranty.
The 1312T/S knee joint is best suitable for use with low functional level andhigh safety needs. The frame construction is made of titanium or stainless steelalloy. This product has 1 year warranty.
The 1313A is light weight manual locking knee for amputees with a very lowfunctional level. This product has a 1 year warranty.
* Replacement Parts
Lanyard for Manual Locking KneeLY13DescriptionP/N
P29.
P-21
100kg100kg
Weight Limit
389g590g
TitaniumStainless Steel
1317T1317S
P/N Material Product Weight
100kg100kg
Weight Limit
671g916g
TitaniumStainless Steel
1315T1315S
P/N Material Product Weight
100kg100kg
Weight Limit
671g916g
TitaniumStainless Steel
1314T1314S
P/N Material Product Weight
Knee Joints
Single Axis Knee with Internal Extension Assistand Adjustable Constant Friction
4 Bar Knee with Manual Lock for KD
4 Bar Knee with Extension Assist for KD
The 1314T/S knee joint is suggested for use by knee disarticulation amputeeswith moderate activity level. It has mechanical adjustment to vary the frictioncontrol and extension assist for swing phase control. It is made of titanium orstainless steel alloy. This product has a 1 year warranty.
The 1315T/S knee joint is a manual locking knee suggested for use by kneedisarticulation amputees with low activity level. The frame is made of titaniumor stainless steel alloy. This product has a 1 year warranty.
The 1317T/S single axis knee joint with adjustuble friction is recommended forpatients with moderate activity level. The frame is made of titanium or stainlesssteel alloy. This product has a 1 year warranty.
* Replacement Parts
Lanyard for Manual Locking KneeLY13DescriptionP/N
P29.
* Replacement Parts
Pyramid Adapter for 1321, 1322 and 1326Lotus Adapter for 1321, 1322 and 1326
PA13LA13
DescriptionP/NP28.
* Replacement Parts
Pyramid Adapter for 1321, 1322 and 1326Lotus Adapter for 1321, 1322 and 1326
PA13LA13
DescriptionP/NP28.
P-22
125kg125kg
Weight Limit
880g880g
AluminumAluminum
1322AP - Pyramid Type1322AL - Lotus Type
P/N Material Product Weight
125kg125kg
Weight Limit
600g600g
AluminumAluminum
1321AP - Pyramid Type1321AL - Lotus Type
P/N Material Product Weight
100kg100kg
Weight Limit
389g590g
TitaniumStainless Steel
1318T1318S
P/N Material Product Weight
Knee Joints
Polycentric Pneumatic 4 Bar Knee
Polycentric 4 Bar Knee
Single Axis Knee with Manual Lock
The 1318T/S single axis knee joint with adjustable manual lock is recommendedfor transfemoral amputees with lower functional level (high stance phase stability,minimal swing phase control). The frame is made of titanium or stainless steelalloy. This product has a 1 year warranty.
The 1321A knee joint is a polycentric knee that is best suited to be used forlow functional level and high need for safety. The frame construction is madeof superlight aluminum alloy and the 4-bar linkage is made of aircraft alloy(AA7075). The proximal attachment has A-P slide and Rotation adjustment.Optional adapters are pyramid adapter (for AK) and lotus adapter (for KD).This product has a 2 year warranty.
The 1322A knee joint is a polycentric knee joint with pneumatic swing controlthat is best suited to be used by low to constant walking speed and with higherdegree of safety. The frame construction is made of superlight aluminum alloyand the 4-bar linkages is made of aircraft alloy (AA7075). All axes have built-inbearing which allow ultra smooth walking movement. The proximal attachmenthas A-P slide and Rotation adjustment. Optional adapters are pyramid adapter(for AK) and lotus adapter (for KD). This product has a 2 year warranty.
Lotus Adapter
Lotus Adapter
* Replacement Parts
Pyramid Adapter for 1321, 1322 and 1326Lotus Adapter for 1321, 1322 and 1326
PA13LA13
DescriptionP/NP28.
P-23
100kg
Weight Limit612gAluminum1325A
P/N Material Product Weight
125kg
Weight Limit
662gStainless Steel1324S
P/N Material Product Weight
Knee Joints
Visco - Elastic 4 Bar Knee
4 Bar Knee for AK and KD
Pneumatic 4 Bar Knee with Integrated Pyramid
The 1324S knee joint is best suited for use with low functional level and highsafety needs. The frame construction is made of stainless steel alloy and hasvisco-elastic behavior with adjustable constant friction control for swing phase.This product has a 2 year warranty.
The 1326A knee joint is best suited for use with low functional level and highsafety needs. The frame construction is made of superlight aluminium alloy.Optional adapters are pyramid adapter (for AK) and lotus adapter (for KD).This product has a 2 year warrannty.
The 1325A knee joint is a polycentric knee joint best suited for use with low toconstannt walking speed while providing a higher degree of safety. The frameconstruction is made of superlight aluminium alloy and incorporates pneumaticswing phase control with independent flexion/extension adjustment. This producthas a 2 year warranty.
Lotus Adapter
100kg100kg
Weight Limit
438g438g
AluminumAluminum
1326AP - Pyramid Type1326AL - Lotus Type
P/N Material Product Weight
P-24
136kg
Weight Limit930gCarbon/Titanium1327
P/N Material Product Weight
136kg
Weight Limit
880gCarbon1328
P/N Material Product Weight
100kg
Weight Limit
268gAluminum1313A-N
P/N Material Product Weight
Knee Joints
Manual Locking Knee - Type B
Carbon Pneumatic Single Axis Knee
Carbon Pneumatic Single Axis Knee with Weight Activated Lock
1313A-N single axis manual locking knee is specially designed for beginner andelderly who has low activity level. It is made from fully machined 7075 airplanealuminum alloy and it is designed to bear up to 100kg loading. The knee joint has4 bearings with 2 outer and 2 inner bearings for smooth walking pace.
Constructed with aluminum knee bracket and carbon fiber knee frame, 1328 isa durable knee in a compact size. Designed for low to mid activity patients withgood balance and stability, it is a single axis knee with pneumatic swing control.Independent flexion and extension swing adjustment allows for fine adjustmentsof swing phase. Proximal pyramid adapter has A-P/M-L slide and Rotationadjustment. This product has a 2 year warranty.
Constructed with titanium knee bracket and carbon fiber knee frame, 1327 is adurable knee in a compact size. Designed for low to mid activity patients, theknee provides security in stance phase with weigth activated locking feature anda pneumatic control for swing phase. Independent flexion and extension swingadjustment allows for fine adjustments of swing phase. Proximal pyramid adapterhas A-P/M-L slide and Rotation adjustment. This product has a 2 year warranty.
NEW!
NNEEWW!!
NNEEWW!!
NENNENEEW!WW!WNNNEEWW!!
P-25
100kg100kg
Weight Limit
718g850g
TitaniumStainless Steel
1330T1330S
P/N Material Product Weight
100kg
Weight Limit
688gAluminum1332A
P/N Material Product Weight
Hip Joint with 4 Bar Linkage
The 1332A hip joint is best suitable to be used for hip disarticulation andhigh need for safety. The frame construction is made of super light aluminumalloy and 4-bar linkages provide a good safety control. This product has2 year warranty.
100kg
Weight Limit
903gAluminum1331A
P/N Material Product Weight
Hip Joints
Hip Joint with Extension Assist
Hip Joint with Internal Extension Assist
The hip joints have an internal extension assist device which can be adjusted topatient's needs. The joint can also be adjusted for hip flexion as well as rotation.This product has a 1 year warranty.
The 1331A hip joint is made of aluminum and stainless. The joint has externalassist, providing the basic needs at lower cost. This product has a 1 year warranty.
NEW!
P-26
Suspension System
Par@sil Liner
The Par@sil liner is a cost-effective silicone prosthetic liner which is offered inboth locking and cushion options. Silky surface of outer matrix allows liner toslide on itself aids in application and removal. This liner with 3mm wall thicknessis made of medical grade silicone. It is suitable for moderate to high activitypatients who require cushioning over sensitive areas in the socket. This producthas a 6 month warranty.
How to sizeMeasurement taken 4cm from the distal end
Knee
Circumference
4cm
2.4mm
3mm
5.2mm
12mm
Par@sil Liner
STANDARD3mm
NEW!W!W!NNEEWW!!
P/N Description
3020C-18
3020C-20
3020C-22
3020C-23.5
3020C-25
3020C-26.5
3020C-28
3020C-30
3020C-32
3020C-34
3020C-36
Par@sil Cushion Liner, 18
Par@sil Cushion Liner, 20
Par@sil Cushion Liner, 22
Par@sil Cushion Liner, 23.5
Par@sil Cushion Liner, 25
Par@sil Cushion Liner, 26.5
Par@sil Cushion Liner, 28
Par@sil Cushion Liner, 30
Par@sil Cushion Liner, 32
Par@sil Cushion Liner, 34
Par@sil Cushion Liner, 36
3020L-18
3020L-20
3020L-22
3020L-23.5
3020L-25
3020L-26.5
3020L-28
3020L-30
3020L-32
3020L-34
3020L-36
Par@sil Locking Liner, 18
Par@sil Locking Liner, 20
Par@sil Locking Liner, 22
Par@sil Locking Liner, 23.5
Par@sil Locking Liner, 25
Par@sil Locking Liner, 26.5
Par@sil Locking Liner, 28
Par@sil Locking Liner, 30
Par@sil Locking Liner, 32
Par@sil Locking Liner, 34
Par@sil Locking Liner, 36
Built in PyramidScrew in Modular Design Provides Easy Maintenance when RequiredCost Effective PricingNeed to Use with Titan or Stainless Steel 3 Prong Rotating Base.Two Types are Available ;- 3150T - Threaded Clutch Lock with Titan 3 Prong Rotating Base- 3150S - Threaded Clutch Lock with SS 3 Prong Rotating BaseWeight Limit : 220lbs/100kgWarranty : 1 year
P-27
3150 Threaded Clutch LockNEW
!
3140 BASE Shuttle Lock
Versatile Cylindrical Body with a 4-Hole AttachmentSerrated Pin Type AttachmentDeep Pin Well for Easy InsertionCost Effective PricingWeight Limit : 220lbs/100kgWarranty : 1 year
NEW!
NENNENEEW!WW!W!NEW!
Suspension System
3130 Integra Clutch Lock
Smooth Gear MechanismAll-in-One DesignQuiet OperationCost Effective PricingIdeal for Laminated SocketsWeight Limit : 250lbs/114kgWarranty : 1 year
NEW!
NENNENEEW!WW!WNEWNEW!
P-28
Pyramid Adapter for KD
P/N : LA13Lotus Adapter for 1321, 1322 and 1326
Pyramid Adapter for AK
P/N : PA13Pyramid Adapter for 1321, 1322 and 1326
Single Component Pack for Single Axis Feet
P/N : 1232-1Included in delivery : 1 lower joint bushing, 1 rubber bumper, 2 nuts, 1 antirotation bridge.
Replacement Parts
Connection Cap for 1101 Single Axis Feet
P/N : 1101-1Sizes : 22, 23, 24, 25, 26, 27, 28
P-29
Lamination Dummy for 4 Ear Connector, Pyramid
P/N : LD
Bolt for SACH Foot Adapter
P/N : 1231-1Included in delivery : 1 cap screw, 1 washer
Extension Assist Kit and Cable forWeight Brake Knee
P/N : 1311-1
Replacement Parts
Lanyard for Manual Locking Knee
P/N : LY13
O-01
Orthoform Low LSO w/Front, Side and Back PanelOrthoform LSO w/Front, Side and Back PanelOrthoform TLSO w/Front, Side and Back Panel
P/N
OM-LLS-AOM-LS-AOM-TL-A
Description
Orthoform System
Spinal Orthotics
. The Orthoform system is an extremely stable spinal orthosis which can be easilycustomized to achieve optimum comfort.
. Features :- Anterior, lateral and posterior panels which are formed between 70-90oC providesextremely comfortable support
- Completely remoldable accommodating the patients' changing needs- The panels are constructed with a low temperature setting, but also has therigidity of a high temperature thermoplastic.
- Available in 3 types (Low LSO, LSO, TLSO)- Size (Width) : Small(28~32"), Medium(32~36"), Large(36~40"), X-Large(40~44")and XX-Large(44~50")
O-01
Low LSO. Indication : Problems in the lower lumbar spine including lower back pain,compression fractures, spondylolysis, spondylolisthesis, post operate bracingfor lumbosacral fusion.. Front panel height : 6 1/2". Back panel height : 11 1/2"
LSO. Indication : Problems in the thoracolumbar junction including compressionfractures, traumatic, osteoporotic or pathologic in nature.. Front panel height : 10"(Small-Medium), 11"(Large-XX-Large). Back panel height : 16"
TLSO. Indication : Problems in the upper thoracic region including compressionfractures, oeteoporotic or pathologic in nature.. Front panel height : 10"(Small-Medium), 11"(Large-XX-Large). Back panel height : 20"
NNEEWW!!
O-02O-01
Cross-Cross
P/N
CCH-100
Description
Spring Hinged TLSO, SmallSpring Hinged TLSO, MediumSpring Hinged TLSO, LargeSpring Hinged TLSO, X-Large
P/N
TL-100STL-100MTL-100LTL-100XL
Description
Spring Hinged Hyperextension TLSO
Cross-Cross Hyperextension Spinal Orthosis
The Criss-Cross hyperextension spinal orthosis reduces risk of additional injuryfrom osteoporosis and compression fractures. This orthosis is for patientsneeding moderate control. The Criss-Cross frame is manufactured from lightweight polished aluminum and features an additional adjustment hole forincreased height/length and medial/lateral positioning. This orthosis also featuresa padded posterior pad with a hook and loop closure system and a slim linethoracic pad for additional comfort and patient compliance. The Criss-Cross isalso a high quality and cost effective product.Indications and uses for the Criss-Cross include: Stable, spontaneous ortraumatic compression fractures, reducing further injury from osteoporosisor compression during therapy and rehab process.
The spring hinged hyperextension TLSO features a three-point pressure controlto dynamically maintain leverage for therapeutic immobilization reducingthe load on the anterior vertebral bodies. The single lumbar strap with ratchetbuckle creates a snag free closure assisting in patient compliance and ease ofdonning and doffing. The overall design reduces kyphotic posture associatedwith compression fractures. The dynamic extension is accomplished through thespring-hinged design, coupled, with the ratchet locking mechanism creating thethree-point pressure control. The orthosis also features a lumbar pad, slim linethoracic pad, adjustment for height and M/L and corrosion resistant aluminumframe nicely polished and finished.
Ratcheting Buckle
P/N
RT-100
Description
Ratcheting Buckle
Spinal Orthotics
Ratcheting buckle can be used as straps in any orthotic application.The ratchetdesign makes it easy for the patient to don the brace with little effort and thequick release enables the patient to doff the brace easily as well.
O-03
PAC Cervical Collar - Standard Type
P/N Description
. Made of light weight closed cell foam material
. Molded and shaped foam helps conform to any patient
. Provides rigid immobilization to cervical spine
. Hook and loop closure for easy adjustment
. Size (Circumference) : Small (10-13"), Medium (13-16"), Large (16-19")
Tracheotomy Cervical Collar, Small, 2 1/4" HeightTracheotomy Cervical Collar, Medium, 2 1/4" HeightTracheotomy Cervical Collar, Large, 2 1/4" HeightTracheotomy Cervical Collar, Small, 3 1/4" HeightTracheotomy Cervical Collar, Medium, 3 1/4" HeightTracheotomy Cervical Collar, Large, 3 1/4" HeightTracheotomy Cervical Collar, Small, 4 1/4" HeightTracheotomy Cervical Collar, Medium, 4 1/4" HeightTracheotomy Cervical Collar, Large, 4 1/4" HeightTracheotomy Cervical Collar, Small, 5 1/4" HeightTracheotomy Cervical Collar, Medium, 5 1/4" HeightTracheotomy Cervical Collar, Large, 5 1/4" Height
PCT-200SPCT-200MPCT-200LPCT-300SPCT-300MPCT-300LPCT-400SPCT-400MPCT-400LPCT-500SPCT-500MPCT-500L
P/N Description
PAC Cervical Collar - Tracheotomy Type
Upper Extremity Orthotics
. Made of light weight closed cell foam material
. Molded and shaped foam helps conform to any patient
. Provides rigid immobilization to cervical spine
. Hook and loop closure for easy adjustment
. Perforated hole for ventilation
. Size (Circumference) : Small (10-13"), Medium (13-16"), Large (16-19")
Standard Cervical Collar, Small, 2 1/4" HeightStandard Cervical Collar, Medium, 2 1/4" HeightStandard Cervical Collar, Large, 2 1/4" Height
Standard Cervical Collar, Small, 3 1/4" HeightStandard Cervical Collar, Medium, 3 1/4" HeightStandard Cervical Collar, Large, 3 1/4" Height
Standard Cervical Collar, Small, 4 1/4" HeightStandard Cervical Collar, Medium, 4 1/4" HeightStandard Cervical Collar, Large, 4 1/4" Height
Standard Cervical Collar, Small, 5 1/4" HeightStandard Cervical Collar, Medium, 5 1/4" HeightStandard Cervical Collar, Large, 5 1/4" Height
PCS-500SPCS-500MPCS-500L
PCS-400SPCS-400MPCS-400L
PCS-300SPCS-300MPCS-300L
PCS-200SPCS-200MPCS-200L
O-04
PairDream Joint II, LargeDJ II-100LPair
Unit
Dream Joint II, SmallDJ II-100S
P/N Description
. Indication & Uses :- CVA- Peroneal nerve palsy- Spinal cord injury- Flail limb- Neurologic motor disabilities- Weak dorsi-flexors- General sagittal plane weakness of the ankle
Dream Joint II
Lower Extremity Orthotics
. Features :- Sleek and low profile design- Plantar flexion resistance- Dorsi-flexion assistance- Patented one way clutch design- Adjustable torque resistance- Ease of fabrication- Light weight- Durable stainless steel
Heel Strike/Plantar Flexion Resistance Midstance Swing Phase/Dorsi Flexion Assist
AdjustableTorgue
Resistance
Plantar FlexionResistance
Dorsi FlexionAssist
ST&GCORP.2008.2
for USA only
Head office:Room No. 1323. Woolim e-BIZ Center 16, Yangpyeong 3-ga, Yeongdeungpo-gu,Seoul, 150-946, Korea Tel: 82-2-2164-8195
Europe:Solamed GmbH Bellmannskamp 4a, 21339 Lueneburg, GermanyTel: 49-4131-266-544
USA:418 E, Esther Place Placentia, CA 92870 Tel: 1-714-396-3739Warehouse :2781 Saturn Street, Suite D, Brea, CA 92821, USATel : 1-714-524-0663 Fax : 1-714-364-8113
Top Related