Catalogo ST&G Protesis y Ortesis

C O R P O R A T I O Nhttp://www.stngco.come-mail:[email protected]

22000088OOrrtthhoottiiccss

22000088PPrroosstthheettiiccss

2008PRODUCT

INFORMATION

ST-41

www.ww stngco.com

for USA only

CONTENTS

Prosthetics

3. Lower Extremity Orthotics

04 AFO Ankle Joints

2. Upper Extremity Orthotics

03 Cervical Collars

1. Spinal Orthotics

01 Orthoform System etc.

Orthotics

17 450lbs & 500lbs System

16 375lbs System

14 Double Ended Adapters

11 Rotating Bases & Pyramids

09 Connectors

07 Tube Clamps

7. Replacement Parts

28 Replacement Parts

6. Suspension Systems

27 Locks

26 Liners

4. BK Kits

19 Heavy Duty BK Kits

18 Ti, SS & Al BK Kits

3. Adapters

06 Tube Clamp Assemblies

05 Aluminum Tubes

5. Knee & Hip Joints

25 Hip Joints

20 Knee Joints

2. Prosthetic Feet

04 Foot Adapters

02 Feet

1. Pediatric Components

01 Pediatric Feet & Adapters

Pediatric 4 Ear Connector

Pediatric Tube Clamp

Pediatric Tube ClampAssembly

Pediatric Foot Adapter

Pediatric SACH Foot

Pediatric Components

This foot is designed for use with a modular adapter P231A.

55kgAluminum / Stainless SteelP220A

P/N Material Weight Limit

55kgAluminumP212A


55kgAluminumP211A


55kgAluminum / Stainless SteelP231A


50kg60kg80kg

15cm17cm19cm

Left, RightLeft, RightLeft, Right

1105=151105=171105=19

P/N Side Size Weight Limit

P-01

* Replacement Parts

Connection Cap for 1101 Single Axis Feet1101-1DescriptionP/N

P28.

P-02

100kgLeft, Right1102 = 21 thru 30P/N Side Weight Limit

100kgLeft, Right1101 = 21 thru 30P/N Side Weight Limit

Prosthetic Feet

SACH Foot

Single Axis Foot

The single axis foot is to be used with single axis ankle joints (1232T, 1232S,1232A, 1233T, 1233S, 1233A).This product has a 1 year warranty.

Internal heel wedge provides soft heel strike. This product has a 1 year warranty.

Sizes : 22, 23, 24, 25, 26, 27, 28

P-03

KES8L22-160

KES8R22-160

KES8L23-160

KES8R23-160

KES8L24-160

KES8R24-160

KES8L25-160

KES8R25-160

KES8L26-160

KES8R26-160

KES8L27-160

KES8R27-160

KES8L28-160

KES8R28-160

KES8L22-130

KES8R22-130

KES8L23-130

KES8R23-130

KES8L24-130

KES8R24-130

KES8L25-130

KES8R25-130

22 Left

22 Right

23 Left

23 Right

24 Left

24 Right

25 Left

25 Right

26 Left

26 Right

27 Left

27 Right

28 Left

28 Right

SizeWeight Limit

60 kgWeight Limit

72.5 kg

The ES dynamic foot brings high-tech performance to lower cost foot. The combination of composite foot plate material anddesign embedded inside the foot foam with integrated pyramid provides optimum flexibility and toe response. The designallows for soft heel cushion with smooth rollover and good toe response. The soft foam provides the cushion at heel and butthe durable outer sole material protects the foam from tearing with the high spring tension of the composite foot plate at thetoe section. This product has a 1 year warranty.

Prosthetic Feet

ES Dynamic Foot

Weight Limit: 220 lbs / 100kgIntegrated pyramid adapter

Top plate compression at mid stance providessmooth rollover

Soft foam andhigh heel cushion

Composite keel - long spring lever provides optimumenergy return at toe off

Special outer sole integrated tothe soft foot foam prevents springkeel from breaking through the sole

Heel compressionof the foot foam

Top platecompresses

closer towardthe spring

Flexible springcomposite keel

for energy return

Part Numbers:

Weight Limit85 kg

Weight Limit100 kg

KES8L22-190

KES8R22-190

KES8L23-190

KES8R23-190

KES8L24-190

KES8R24-190

KES8L25-190

KES8R25-190

KES8L26-190

KES8R26-190

KES8L27-190

KES8R27-190

KES8L28-190

KES8R28-190

KES8L23-220

KES8R23-220

KES8L24-220

KES8R24-220

KES8L25-220

KES8R25-220

KES8L26-220

KES8R26-220

KES8L27-220

KES8R27-220

KES8L28-220

KES8R28-220

* Replacement Parts

Single Component Pack for Single Axis Feet1232-1DescriptionP/N

P29.

Included in delivery : 1 lower joint bushing, 1 rubberbumper, 2 nuts, 1 anti rotation bridge.

P-04

100kg100kg100kg100kg90kg90kg

Weight Limit

197g203g305g317g223g227g

TitaniumTitaniumStainless SteelStainless SteelAluminumAluminum

SmallLargeSmallLargeSmallLarge

Size

1232T1233T1232S1233S1232A1233A

P/N Material Product Weight

136kg125kg114kg

Weight Limit

80g112g105g

TitaniumStainless SteelAluminum

1231T1231S1231A


Prosthetic Feet

Single Axis Foot Adapter

SACH Foot Adapter

Titanium SACH Foot AdapterThe titanium foot adapter has a shorter flange providing better strength withreducing weight. The 1231T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.A foot bolt is provided with every adapter. This product has a 2 year warranty.

Stainless Steel SACH Foot AdapterThe stainless steel foot adapter is manufactured with high strength stainless steelalloy providing for a high quality and strong product. A foot bolt is providedwith every adapter. This product has a 2 year warranty.

Aluminum SACH Foot AdapterThe aluminum foot adapter is manufactured by a forged and machinedcombination providing for a high quality and strong product. The flange ismanufactured with stainless steel to reduce fatigue at the attachment site.A foot bolt is provided with every adapter. This product has a 2 year warranty.

Titanium Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.

Stainless Steel Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.

Aluminum Single Axis Foot AdapterThe articulating ankle joint comes with plantar flexion stop made of elasticmember, thus providing elastic plantar flexion stop.This product has a 1 year warranty.

* Replacement Parts

Bolt for SACH Foot Adapter1231-1DescriptionP/N

P29.

Included in delivery : 1 cap screw, 1 washer

P-05

227g538g

Product Weight

136kg114kg

Weight Limit

385mm910mm

AluminumAluminum

1209A1210A

P/N Material Length

Adapters

Aluminum Tube

Aluminum 385mm TubeThe 1209A aluminum tube has a diameter of 30mm and length of 385mm.It is extruded and shot peened for an optimum strength. It can be cut to lengthfor use. This product has a 1 year warranty.

Aluminum 910mm TubeThe 1210A aluminum tube has a diameter of 30mm and length of 910mm.It is extruded and shot peened for an optimum strength. It can be cut to lengthfor use. This product has a 1 year warranty.

136kg114kg114kg90kg90kg

136kg

Weight Limit

306g344g307g201g320g232g

TitaniumStainless SteelAluminumMolded SSMolded SSTitanium/Aluminum

1211T1211S1211A1211MS - 2001211MS - 4001241T


Titanium Tube Clamp AssemblyThe titanium fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The titanium adapter is forged and machinedwhile the aluminum tube is extruded and shot peened for an optimum fatiguestrength. This combination creates a high quality, durable and strong component.This product has a 2 year warranty.

Stainless Steel Tube Clamp AssemblyThe stainless fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The stainless steel adapter is made of highstrength stainless steel alloy while the aluminum tube is extruded and shot peenedfor an optimum fatigue strength. This combination creates a high quality, durableand strong component. This product has a 2 year warranty.

Aluminum Tube Clamp AssemblyThe aluminum fixed adapter with 30mm aluminum tube has a permanent adapterat one end. It can be cut to length. The aluminum adapter is forged and machinedwhile the aluminum tube is extruded and shot peened for an optimum fatiguestrength. This combination creates a high quality, durable and strong component.This product has a 2 year warranty.

Molded Stainless Steel Tube Clamp AssemblyThe molded stainless steel fixed adapter with 30mm aluminum tube comes intwo length 200mm and 400mm. This product has a 1 year warranty.

⑤ Low Profile Tube Clamp AssemblyThe low profile titanium fixed adapter with 30mm aluminum tube has a permanentadapter at one end. It can be cut to length. The titanium adapter is forged andmachined while the aluminum tube with 223mm is extruded and shot peened for anoptimum fatigue strength. This combination creates a high quality, durable andstrong component. This product has a 2 year warranty.

⑤

Adapters

Tube ClampAssembly

P-06

NNEEWW!!

136kg

Weight Limit

98gTitanium1222T


136kg125kg114kg90kg

Weight Limit

79g128g83g

117g

TitaniumStainless SteelAluminumMolded SS

1212T1212S1212A1212MS


Adapters

Offset Tube Clamp

Tube Clamp

Titanium Tube ClampThe titanium 30mm tube clamp adapter is designed for an optimum strength whilemaintaining low weight. A forged and machined combination provides a highquality and strong product. This product has a 2 year warranty.

Stainless Steel Tube ClampThe stainless steel 30mm tube clamp adapter is made of high strength stainlesssteel alloys providing a strong and durable component. This product has a 2 yearwarranty.

Aluminum Tube ClampThe aluminum 30mm tube clamp adapter is made of high strength aluminumalloys. This tube clamp is manufactured by a forged and machined combinationproviding for a high quality and strong product. This product has a 2 yearwarranty.

Molded Stainless Steel Econo Tube ClampThe molded stainless steel 30mm econo tube clamp adapter is designed for costeffective application. This product has a 1 year warranty.

The titanium 30mm offset tube clamp is used when extra alignment is needed.It is also ideal when using a pin suspension lock, where prosthetic and pinalignment can be easily adjusted using the offset clamp. This versatile clampdesign also provides an offset position that can be rotated 360 degrees. Thisproduct has a 2 year warranty.

P-07

Weight LimitP/N Material Product Weight

100kg95gStainless Steel1252S100kg62gTitanium1252T

Tube Clamp w/Pyramid

Titanium Tube Clamp w/PyramidThe titanium 30mm tube adapter w/pyramid is designed for an option strengthwhile maintaining low weight. High strength titanium provides a high quality andstrong product. This product has 2 year warranty.

Stainless Steel Tube Clamp w/PyramidThe stainless steel 30mm tube clamp w/pyramid is made of high strengthstainless steel alloys providing a strong and durable component.This product has 2 year warranty.

100kg

Weight Limit

86gTitanium1213T


100kg

Weight Limit

185gTitanium1219T


Sliding Tube Clamp

Adapters

10 Degree Angled Tube Clamp

The 10-degree titanium angled adapter is used often with hip disarticulationsystem. The 10-degree angle tilt helps at times with alignment associated withhip disarticulation system and as well as transfemoral and transtibial alignmentsituation. This product has a 2 year warranty.

The titanium 30mm sliding tube clamp adapter permits additional slidingadjustment between the prosthetic socket and tube adapter, even as the prosthesisis being worn.The sliding adjustment allows for fine tuning in any desired parallelposition of the distal portion, independent of the angle of adjustment through thepyramid.This product has a 2 year warranty.

P-08

NEW!

P-09

136kg

Weight Limit

53gTitanium1218T


159kg

Weight Limit

73gTitanium1227T


136kg125kg114kg

Weight Limit

70g111g81g


1217T1217S1217A


Adapters

4 Hole Connector, Receiver

4 Hole Connector, Pyramid

4 Hole Connector w/o Pyramid Hole

Titanium 4 Hole Pyramid Connector, PyramidThe non rotatable 4-hole titanium pyramid adapter attaches to any socket orknee with a distal 4-hole pattern. 4 flat head screws are provided with everypyramid. The 1217T is manufactured by a forged and machined combinationproviding combination providing for a high quality, light weight and strongprooduct. This product has a 2 year warranty.

Stainless Steel 4 Hole Connector, PyramidThe non rotatable 4-hole stainless steel pyramid adapter attaches to any socketor knee with a 4-hole pattern. 4 flat head screws are provided with everypyramid. The 1217S is manufactured from high strength stainless steel alloyproviding for a high quality and strong product. This product has a 2 yearwarranty.

Aluminum 4 Hole Connector, PyramidThe non rotatable 4-hole aluminum pyramid adapter attaches to any socket orknee with a 4-hole pattern. 4 flat head screws are provided with every pyramid.The 1217A is manufactured by a forged and machined combination providingfor a high quality and strong product. This product has a 2 year warranty.

The non rotatable 4-hole titanium connector without pyramid hole attaches toany socket or knee with a distal 4-hole pattern. It comes with 4 flat head screws.It provides more strength than the 1217T. Titanium is forged machined forhigh strength and quality. This product has a 2 year warranty.

The 4-hole connector receiver is used to connect to any 4-hole thread systemand pyramid connection. Used 4 flat head screws to connect to 4-hole connector.4 set screws are used for anchoring the mating pyramid system as well as formaking angular adjustment for alignment. Apply recommended torque toalignment adjustment screws for connection. Apply loctite to all screws once thealignment and connection is finalized. This product has a 2 year warranty.

* Replacement Parts

Lamination Dummy for 4 Ear Connector, PyramidLDDescriptionP/N

P29.

* Replacement Parts

Lamination Dummy for 4 Ear Connector, PyramidLDDescriptionP/N

P29.

P-10

136kg125kg114kg

Weight Limit

55g97g63g


1220T1220S1220A


159kg

Weight Limit

58gTitanium1230T


Adapters

4 Ear Connector w/o Pyramid Hole

4 Ear Connector, Pyramid

Titanium 4 Ear Connector, PyramidThe titanium 4-ear connector provides an option for a one step lamination into atranstibial socket. A lamination cover is included with every 4-ear connector.The 1220T is manufactured by a forged and machined combination providing fora high quality, light weight and strong product. This product has a 2 year warranty.

Stainless Steel 4 Ear Connector, PyramidThe stainless steel 4-ear connector provides for a one step lamination into atranstibial socket. A lamination cover is included with every 4-ear connector.The 1220S is manufactured with high strength stainless steel alloy providingfor a high quality and strong product. This product has a 2 year warranty.

Aluminum 4 Ear Connector, PyramidThe aluminum 4-ear connector provides an option for a one step laminationinto a transtibial socket. A lamination cover is included with every 4-earconnector. The 1220A is manufactured by a forged and machined combinationproviding for a high quality and strong product. This product has 2 year warranty.

The 4-ear titanium connector without pyramid hole provides a one steplamination into a transtibial socket. It includes a lamination cover. It providesmore strength than the 1220T. The 1230T is manufactured by a forged andmachined combination providing for a high quality and strength. This product hasa 2 year warranty.

P-11

136kg

Weight Limit

290gFoam1209W


Foam Block, 4 Hole Adapter

The foam block is designed to be laminated into a socket, and it's typically usedfor two step lamination process. Socket can be bench aligned onto the foam blockand can be set by using any kind of quick setting glue. Once the alignmentbetween the socket and the foam block is set, trim the foam block as needed andprepare it for second lamination. Any 4 hole adapters with European 4 hole patternwill fit onto the foam block adapter. This product has a 2 year warranty.

136kg

Weight Limit

72gTitanium1214T


Adapters

4 Hole Rotating Base

The 4-hole rotating base provides 360 degrees of rotation for pyramid adapteror pyramid receiver. Used with the 1215T or 1216T/S. All attachment screws areprovided with 4-hole base. The 1214T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.This product has a 2 year warranty.

136kg

Weight Limit

116gStainless Steel1221S


3 Prong Rotating Base

The 3-prong adapter is used for lamination onto transfemoral socket. The adapterprovides 360 degrees of rotation for pyramid adapter or pyramid receiver. Thisproduct can be used with the 1215T or 1216T/S. The 1221S is manufactured froma high quality and strong product. This product has a 2 year warranty.

P-12

136kg100kg

Weight Limit

158g168g

Titanium + Stainless SteelStainless Steel

12541254S


136kg125kg

Weight Limit

164g184g

Titanium + Stainless SteelStainless Steel

12531253S


Adapters

3 Prong Rotating Base with Rotating Pyramid

3 Prong Rotating Base with Rotating Receiver

Stainless Steel 3 Prong Rotating Base with Titanium Rotating ReceiverThis 3 prong rotating base with rotating receiver consists of 1221S(3 prong rotating base) and 1216T(rotating receiver). This product has 2 yearwarranty.

Stainless Steel 3 Prong Rotating Base with Stainless Steel Rotating ReceiverThis 3 prong rotating base with rotating receiver consists of 1221S(3 prong rotating base) and 1216S(rotating receiver). This product has 2 yearwarranty.

Stainless Steel 3 Prong Rotating Base with Titanium Rotating PyramidThis 3 prong rotating base with rotating pyramid consists of 1221S(3 prong rotating base) and 1215T(rotating receiver). This product has 2 yearwarranty.

Stainless Steel 3 Prong Rotating Base with Stainless Steel Rotating PyramidThis 3 prong rotating base with rotating pyramid consists of 1221S(3 prong rotating base) and 1215S(rotating receiver). This product has 2 yearwarranty.

100kg

Weight Limit



3 Prong Rotating Base with Fixed Pyramid

P-13

136kg125kg

Weight Limit

42g80g

TitaniumStainless Steel

1215T1215S


136kg125kg

Weight Limit

48g68g


1216T1216S


136kg

Weight Limit

39gTitanium1225T


Rotating Pyramid

Titanium Rotating PyramidThe titanium rotating pyramid can be used with 1214T or 1221T/S. The 1215T ismanufactured by a forged and machined combination providing for a high quality,light weight and strong product. This product has a 2 year warranty.

Stainless Steel Rotating PyramidThe stainless steel rotating pyramid can be used with 1214T or 1221T/S. Thisproduct has a 2 year warranty.

Adapters

Rotating Pyramid with Hole

The titanium rotating pyramid with hole can be used with 1214T or 1221T/S.Titanium is forged and machined for a high strength and quality. This producthas a 2 year warranty.

Rotating Receiver

The rotating pyramid receiver can be used with 1214T or 1221T/S. Titanium isforged and machined for a high strength and quality. This product has a 2 yearwarranty.

This 3 prong rotating base with fixed pyramid used for lamination ontotransfemoral socket. This product has 2 year warranty.

P-14

136kg

Weight Limit

128g100mm

Height

32mm45mm60mm75mm

125kg125kg125kg125kg

106g124g134g154g

Stainless SteelStainless SteelStainless SteelStainless Steel

1201S1202S1203S1204S

32mm45mm60mm75mm

Height

Titanium1205T



Weight Limit

88g99g

113g126g

TitaniumTitaniumTitaniumTitanium

1201T1202T1203T1204T


Adapters

Tube with Pyramid Receiver

Double Ended Adapter

Titanium tube adapter provides optimum strength and options for low clearancerequirements. This product has a 2 year warranty.

Double Ended AdapterWith pyramid receivers on both ends, these titanium adapters provide excellentadjustability options when clearance is limited. They are available in 32mm,45mm, 60mm and 75mm height. This product has a 2 year warranty.

Double Ended Adapter, 32mmDouble Ended Adapter, 45mmDouble Ended Adapter, 60mmDouble Ended Adapter, 75mm

P-15

32mm45mm60mm75mm

102g112g124g162g

Stainless SteelStainless SteelStainless SteelStainless Steel

32mm45mm60mm75mm

Height



Weight Limit

56g68g76g90g

TitaniumTitaniumTitaniumTitanium

1261S1262S1263S1264S

1261T1262T1263T1264T


Adapters

Double Ended Adapter w/Pyramid

With pyramid and pyramid receiver on both ends, these titanium/stainless steeladapters provide excellent adjustability options when clearance is limited.They are available in 32mm, 45mm, 60mm and 75mm height.This product has a 2 year warranty.

Double Ended Adapter w/Pyramid, 32mmDouble Ended Adapter w/Pyramid, 45mmDouble Ended Adapter w/Pyramid, 60mmDouble Ended Adapter w/Pyramid, 75mm

NNEEWW!!

Heavy Duty Tube ClampThe heavy duty 30mm tube clamp adapter is designed for an optimum strengthwhile maintaining low weight. A forged and machined combination provides ahigh quality and strong product. This product has a 2 year warranty.

Heavy Duty SACH Foot AdapterThe haby duty foot adapter has a shorter flange providing better strength withreducing weight. The 3231T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product.A foot bolt is provided with every adapter. This product has a 2 year warranty.

Heavy Duty 4 Ear Connector, PyramidThe heavy duty 4-ear connector provides an option for a one-step lamination intoa transtibial socket. The 3230T is manufactured by a forged and machinedcombination providing for a high quality, light weight and strong product. Thisproduct has a 2 year warranty.

Heavy Duty Carbon TubeThe 1209C carbon tube has a diameter of 30mm and length of 305mm. Thisproduct has a 2 year warranty.


Weight Limit

167g99g76g93g

CarbonTitaniumTitaniumTitanium

1209C3212T3230T3231T


P-16

375lbs System

Adapters

NNEEWW!!

NNEEWW!!

NNEEWW!!

204kg204kg

Weight Limit

147g127g

TitaniumTitanium

4212T4220T


450lbs System



226kg226kg226kg

Weight Limit

269g167g141g

CarbonTitaniumTitanium

5209C5212T5220T


500lbs System



Heavy Duty Carbon TubeThe 5209C carbon tube has a diameter of 34mm and length of 305mm. Thisproduct has a 2 year warranty.

P-17

Adapters

P-18

BK Kits

114kg

Weight Limit

390gAluminum110A


114kg

Weight Limit



136kg

Weight Limit

385gTitanium110T


Aluminum BK Kit

Stainless Steel BK Kit

Titanium BK Kit

Aluminum BK kit consists of 1212A (tube clamp) and1211A (tube clamp assembly).

Stainless steel BK kit consists of 1212S (tube clamp) and1211S (tube clamp assembly).

Titanium BK kit consists of 1212T (tube clamp) and1211T (tube clamp assembly).

P-19

BK Kits

NNEEWW!!

NNEEWW!!

500lbs BK Kit

450lbs BK Kit

375lbs BK Kit

450lbs BK Kit consists of 4212T (tube clamp) x 2 pieces, 4220T(4 ear connector)and 5209C(carbon tube).

500lbs BK Kit consists of 5212T(tube clamp) x 2 pieces, 5220T(4 ear connector)and 5209C(carbon tube).

375lbs BK Kit consists of 3212T (tube clamp) x 2 pieces, 3230T(4 ear connector)and 1209C(carbon tube).

NNEEWW!!

170kg

Weight Limit

441gTitanium/Carbon310T


204kg

Weight Limit



226kg

Weight Limit



* Replacement Parts

Lanyard for Manual Locking KneeLY13DescriptionP/N

P29.

* Replacement Parts

Extension Assist Kit and Cable for Weight Brake Knee1311-1DescriptionP/N

P29.

P-20

100kg100kg

Weight Limit

362g532g


1311T1311S


100kg114kg

Weight Limit

481g719g


1312T1312S


90kg

Weight Limit

298gAluminum1313A


Knee Joints

Manual Locking Knee - Type A

Mechanical 4 Bar Knee

Weight Activated Brake Knee

The 1311T/S is a stance phase friction brake activated by weight bearing anddesigned for transfemoral amputees with moderate functional demands. It isalso suitable for amputees with lower functional levels who desire to avoidusing a manual locking knee. This product has a 1 year warranty.

The 1312T/S knee joint is best suitable for use with low functional level andhigh safety needs. The frame construction is made of titanium or stainless steelalloy. This product has 1 year warranty.

The 1313A is light weight manual locking knee for amputees with a very lowfunctional level. This product has a 1 year warranty.

* Replacement Parts


P29.

P-21

100kg100kg

Weight Limit

389g590g


1317T1317S


100kg100kg

Weight Limit

671g916g


1315T1315S


100kg100kg

Weight Limit

671g916g


1314T1314S


Knee Joints

Single Axis Knee with Internal Extension Assistand Adjustable Constant Friction

4 Bar Knee with Manual Lock for KD

4 Bar Knee with Extension Assist for KD

The 1314T/S knee joint is suggested for use by knee disarticulation amputeeswith moderate activity level. It has mechanical adjustment to vary the frictioncontrol and extension assist for swing phase control. It is made of titanium orstainless steel alloy. This product has a 1 year warranty.

The 1315T/S knee joint is a manual locking knee suggested for use by kneedisarticulation amputees with low activity level. The frame is made of titaniumor stainless steel alloy. This product has a 1 year warranty.

The 1317T/S single axis knee joint with adjustuble friction is recommended forpatients with moderate activity level. The frame is made of titanium or stainlesssteel alloy. This product has a 1 year warranty.

* Replacement Parts


P29.

* Replacement Parts

Pyramid Adapter for 1321, 1322 and 1326Lotus Adapter for 1321, 1322 and 1326

PA13LA13

DescriptionP/NP28.

* Replacement Parts


PA13LA13

DescriptionP/NP28.

P-22

125kg125kg

Weight Limit

880g880g

AluminumAluminum

1322AP - Pyramid Type1322AL - Lotus Type


125kg125kg

Weight Limit

600g600g

AluminumAluminum



100kg100kg

Weight Limit

389g590g


1318T1318S


Knee Joints

Polycentric Pneumatic 4 Bar Knee

Polycentric 4 Bar Knee

Single Axis Knee with Manual Lock

The 1318T/S single axis knee joint with adjustable manual lock is recommendedfor transfemoral amputees with lower functional level (high stance phase stability,minimal swing phase control). The frame is made of titanium or stainless steelalloy. This product has a 1 year warranty.

The 1321A knee joint is a polycentric knee that is best suited to be used forlow functional level and high need for safety. The frame construction is madeof superlight aluminum alloy and the 4-bar linkage is made of aircraft alloy(AA7075). The proximal attachment has A-P slide and Rotation adjustment.Optional adapters are pyramid adapter (for AK) and lotus adapter (for KD).This product has a 2 year warranty.

The 1322A knee joint is a polycentric knee joint with pneumatic swing controlthat is best suited to be used by low to constant walking speed and with higherdegree of safety. The frame construction is made of superlight aluminum alloyand the 4-bar linkages is made of aircraft alloy (AA7075). All axes have built-inbearing which allow ultra smooth walking movement. The proximal attachmenthas A-P slide and Rotation adjustment. Optional adapters are pyramid adapter(for AK) and lotus adapter (for KD). This product has a 2 year warranty.

Lotus Adapter

Lotus Adapter

* Replacement Parts


PA13LA13

DescriptionP/NP28.

P-23

100kg

Weight Limit612gAluminum1325A


125kg

Weight Limit



Knee Joints

Visco - Elastic 4 Bar Knee

4 Bar Knee for AK and KD

Pneumatic 4 Bar Knee with Integrated Pyramid

The 1324S knee joint is best suited for use with low functional level and highsafety needs. The frame construction is made of stainless steel alloy and hasvisco-elastic behavior with adjustable constant friction control for swing phase.This product has a 2 year warranty.

The 1326A knee joint is best suited for use with low functional level and highsafety needs. The frame construction is made of superlight aluminium alloy.Optional adapters are pyramid adapter (for AK) and lotus adapter (for KD).This product has a 2 year warrannty.

The 1325A knee joint is a polycentric knee joint best suited for use with low toconstannt walking speed while providing a higher degree of safety. The frameconstruction is made of superlight aluminium alloy and incorporates pneumaticswing phase control with independent flexion/extension adjustment. This producthas a 2 year warranty.

Lotus Adapter

100kg100kg

Weight Limit

438g438g

AluminumAluminum



P-24

136kg

Weight Limit930gCarbon/Titanium1327


136kg

Weight Limit

880gCarbon1328


100kg

Weight Limit

268gAluminum1313A-N


Knee Joints

Manual Locking Knee - Type B

Carbon Pneumatic Single Axis Knee

Carbon Pneumatic Single Axis Knee with Weight Activated Lock

1313A-N single axis manual locking knee is specially designed for beginner andelderly who has low activity level. It is made from fully machined 7075 airplanealuminum alloy and it is designed to bear up to 100kg loading. The knee joint has4 bearings with 2 outer and 2 inner bearings for smooth walking pace.

Constructed with aluminum knee bracket and carbon fiber knee frame, 1328 isa durable knee in a compact size. Designed for low to mid activity patients withgood balance and stability, it is a single axis knee with pneumatic swing control.Independent flexion and extension swing adjustment allows for fine adjustmentsof swing phase. Proximal pyramid adapter has A-P/M-L slide and Rotationadjustment. This product has a 2 year warranty.

Constructed with titanium knee bracket and carbon fiber knee frame, 1327 is adurable knee in a compact size. Designed for low to mid activity patients, theknee provides security in stance phase with weigth activated locking feature anda pneumatic control for swing phase. Independent flexion and extension swingadjustment allows for fine adjustments of swing phase. Proximal pyramid adapterhas A-P/M-L slide and Rotation adjustment. This product has a 2 year warranty.

NEW!

NNEEWW!!

NNEEWW!!

NENNENEEW!WW!WNNNEEWW!!

P-25

100kg100kg

Weight Limit

718g850g


1330T1330S


100kg

Weight Limit

688gAluminum1332A


Hip Joint with 4 Bar Linkage

The 1332A hip joint is best suitable to be used for hip disarticulation andhigh need for safety. The frame construction is made of super light aluminumalloy and 4-bar linkages provide a good safety control. This product has2 year warranty.

100kg

Weight Limit

903gAluminum1331A


Hip Joints

Hip Joint with Extension Assist

Hip Joint with Internal Extension Assist

The hip joints have an internal extension assist device which can be adjusted topatient's needs. The joint can also be adjusted for hip flexion as well as rotation.This product has a 1 year warranty.

The 1331A hip joint is made of aluminum and stainless. The joint has externalassist, providing the basic needs at lower cost. This product has a 1 year warranty.

NEW!

P-26

Suspension System

Par@sil Liner

The Par@sil liner is a cost-effective silicone prosthetic liner which is offered inboth locking and cushion options. Silky surface of outer matrix allows liner toslide on itself aids in application and removal. This liner with 3mm wall thicknessis made of medical grade silicone. It is suitable for moderate to high activitypatients who require cushioning over sensitive areas in the socket. This producthas a 6 month warranty.

How to sizeMeasurement taken 4cm from the distal end

Knee

Circumference

4cm

2.4mm

3mm

5.2mm

12mm

Par@sil Liner

STANDARD3mm

NEW!W!W!NNEEWW!!

P/N Description

3020C-18

3020C-20

3020C-22

3020C-23.5

3020C-25

3020C-26.5

3020C-28

3020C-30

3020C-32

3020C-34

3020C-36

Par@sil Cushion Liner, 18



Par@sil Cushion Liner, 23.5


Par@sil Cushion Liner, 26.5






3020L-18

3020L-20

3020L-22

3020L-23.5

3020L-25

3020L-26.5

3020L-28

3020L-30

3020L-32

3020L-34

3020L-36

Par@sil Locking Liner, 18



Par@sil Locking Liner, 23.5


Par@sil Locking Liner, 26.5






Built in PyramidScrew in Modular Design Provides Easy Maintenance when RequiredCost Effective PricingNeed to Use with Titan or Stainless Steel 3 Prong Rotating Base.Two Types are Available ;- 3150T - Threaded Clutch Lock with Titan 3 Prong Rotating Base- 3150S - Threaded Clutch Lock with SS 3 Prong Rotating BaseWeight Limit : 220lbs/100kgWarranty : 1 year

P-27

3150 Threaded Clutch LockNEW

!

3140 BASE Shuttle Lock

Versatile Cylindrical Body with a 4-Hole AttachmentSerrated Pin Type AttachmentDeep Pin Well for Easy InsertionCost Effective PricingWeight Limit : 220lbs/100kgWarranty : 1 year

NEW!

NENNENEEW!WW!W!NEW!

Suspension System

3130 Integra Clutch Lock

Smooth Gear MechanismAll-in-One DesignQuiet OperationCost Effective PricingIdeal for Laminated SocketsWeight Limit : 250lbs/114kgWarranty : 1 year

NEW!

NENNENEEW!WW!WNEWNEW!

P-28

Pyramid Adapter for KD

P/N : LA13Lotus Adapter for 1321, 1322 and 1326

Pyramid Adapter for AK

P/N : PA13Pyramid Adapter for 1321, 1322 and 1326

Single Component Pack for Single Axis Feet

P/N : 1232-1Included in delivery : 1 lower joint bushing, 1 rubber bumper, 2 nuts, 1 antirotation bridge.

Replacement Parts

Connection Cap for 1101 Single Axis Feet

P/N : 1101-1Sizes : 22, 23, 24, 25, 26, 27, 28

P-29

Lamination Dummy for 4 Ear Connector, Pyramid

P/N : LD

Bolt for SACH Foot Adapter

P/N : 1231-1Included in delivery : 1 cap screw, 1 washer

Extension Assist Kit and Cable forWeight Brake Knee

P/N : 1311-1

Replacement Parts

Lanyard for Manual Locking Knee

P/N : LY13

O-01

Orthoform Low LSO w/Front, Side and Back PanelOrthoform LSO w/Front, Side and Back PanelOrthoform TLSO w/Front, Side and Back Panel

P/N

OM-LLS-AOM-LS-AOM-TL-A

Description

Orthoform System

Spinal Orthotics

. The Orthoform system is an extremely stable spinal orthosis which can be easilycustomized to achieve optimum comfort.

. Features :- Anterior, lateral and posterior panels which are formed between 70-90oC providesextremely comfortable support

- Completely remoldable accommodating the patients' changing needs- The panels are constructed with a low temperature setting, but also has therigidity of a high temperature thermoplastic.

- Available in 3 types (Low LSO, LSO, TLSO)- Size (Width) : Small(28~32"), Medium(32~36"), Large(36~40"), X-Large(40~44")and XX-Large(44~50")

O-01

Low LSO. Indication : Problems in the lower lumbar spine including lower back pain,compression fractures, spondylolysis, spondylolisthesis, post operate bracingfor lumbosacral fusion.. Front panel height : 6 1/2". Back panel height : 11 1/2"

LSO. Indication : Problems in the thoracolumbar junction including compressionfractures, traumatic, osteoporotic or pathologic in nature.. Front panel height : 10"(Small-Medium), 11"(Large-XX-Large). Back panel height : 16"

TLSO. Indication : Problems in the upper thoracic region including compressionfractures, oeteoporotic or pathologic in nature.. Front panel height : 10"(Small-Medium), 11"(Large-XX-Large). Back panel height : 20"

NNEEWW!!

O-02O-01

Cross-Cross

P/N

CCH-100

Description

Spring Hinged TLSO, SmallSpring Hinged TLSO, MediumSpring Hinged TLSO, LargeSpring Hinged TLSO, X-Large

P/N

TL-100STL-100MTL-100LTL-100XL

Description

Spring Hinged Hyperextension TLSO

Cross-Cross Hyperextension Spinal Orthosis

The Criss-Cross hyperextension spinal orthosis reduces risk of additional injuryfrom osteoporosis and compression fractures. This orthosis is for patientsneeding moderate control. The Criss-Cross frame is manufactured from lightweight polished aluminum and features an additional adjustment hole forincreased height/length and medial/lateral positioning. This orthosis also featuresa padded posterior pad with a hook and loop closure system and a slim linethoracic pad for additional comfort and patient compliance. The Criss-Cross isalso a high quality and cost effective product.Indications and uses for the Criss-Cross include: Stable, spontaneous ortraumatic compression fractures, reducing further injury from osteoporosisor compression during therapy and rehab process.

The spring hinged hyperextension TLSO features a three-point pressure controlto dynamically maintain leverage for therapeutic immobilization reducingthe load on the anterior vertebral bodies. The single lumbar strap with ratchetbuckle creates a snag free closure assisting in patient compliance and ease ofdonning and doffing. The overall design reduces kyphotic posture associatedwith compression fractures. The dynamic extension is accomplished through thespring-hinged design, coupled, with the ratchet locking mechanism creating thethree-point pressure control. The orthosis also features a lumbar pad, slim linethoracic pad, adjustment for height and M/L and corrosion resistant aluminumframe nicely polished and finished.

Ratcheting Buckle

P/N

RT-100

Description

Ratcheting Buckle

Spinal Orthotics

Ratcheting buckle can be used as straps in any orthotic application.The ratchetdesign makes it easy for the patient to don the brace with little effort and thequick release enables the patient to doff the brace easily as well.

O-03

PAC Cervical Collar - Standard Type

P/N Description

. Made of light weight closed cell foam material

. Molded and shaped foam helps conform to any patient

. Provides rigid immobilization to cervical spine

. Hook and loop closure for easy adjustment

. Size (Circumference) : Small (10-13"), Medium (13-16"), Large (16-19")

Tracheotomy Cervical Collar, Small, 2 1/4" HeightTracheotomy Cervical Collar, Medium, 2 1/4" HeightTracheotomy Cervical Collar, Large, 2 1/4" HeightTracheotomy Cervical Collar, Small, 3 1/4" HeightTracheotomy Cervical Collar, Medium, 3 1/4" HeightTracheotomy Cervical Collar, Large, 3 1/4" HeightTracheotomy Cervical Collar, Small, 4 1/4" HeightTracheotomy Cervical Collar, Medium, 4 1/4" HeightTracheotomy Cervical Collar, Large, 4 1/4" HeightTracheotomy Cervical Collar, Small, 5 1/4" HeightTracheotomy Cervical Collar, Medium, 5 1/4" HeightTracheotomy Cervical Collar, Large, 5 1/4" Height

PCT-200SPCT-200MPCT-200LPCT-300SPCT-300MPCT-300LPCT-400SPCT-400MPCT-400LPCT-500SPCT-500MPCT-500L

P/N Description

PAC Cervical Collar - Tracheotomy Type

Upper Extremity Orthotics

. Made of light weight closed cell foam material

. Molded and shaped foam helps conform to any patient

. Provides rigid immobilization to cervical spine

. Hook and loop closure for easy adjustment

. Perforated hole for ventilation

. Size (Circumference) : Small (10-13"), Medium (13-16"), Large (16-19")

Standard Cervical Collar, Small, 2 1/4" HeightStandard Cervical Collar, Medium, 2 1/4" HeightStandard Cervical Collar, Large, 2 1/4" Height




PCS-500SPCS-500MPCS-500L




O-04

PairDream Joint II, LargeDJ II-100LPair

Unit

Dream Joint II, SmallDJ II-100S

P/N Description

. Indication & Uses :- CVA- Peroneal nerve palsy- Spinal cord injury- Flail limb- Neurologic motor disabilities- Weak dorsi-flexors- General sagittal plane weakness of the ankle

Dream Joint II

Lower Extremity Orthotics

. Features :- Sleek and low profile design- Plantar flexion resistance- Dorsi-flexion assistance- Patented one way clutch design- Adjustable torque resistance- Ease of fabrication- Light weight- Durable stainless steel

Heel Strike/Plantar Flexion Resistance Midstance Swing Phase/Dorsi Flexion Assist

AdjustableTorgue

Resistance

Plantar FlexionResistance

Dorsi FlexionAssist

ST&GCORP.2008.2

for USA only

Head office:Room No. 1323. Woolim e-BIZ Center 16, Yangpyeong 3-ga, Yeongdeungpo-gu,Seoul, 150-946, Korea Tel: 82-2-2164-8195

Europe:Solamed GmbH Bellmannskamp 4a, 21339 Lueneburg, GermanyTel: 49-4131-266-544

USA:418 E, Esther Place Placentia, CA 92870 Tel: 1-714-396-3739Warehouse :2781 Saturn Street, Suite D, Brea, CA 92821, USATel : 1-714-524-0663 Fax : 1-714-364-8113

Catalogo ST&G Protesis y Ortesis

Documents

Transcript of Catalogo ST&G Protesis y Ortesis