without inside mandrel

INECOMax, QB-76 VDMSplc and QB-76 VDESplc models

INECOBasic QB-50 VDEplcmax. bending Radius 225 mmmin. bending Radius 10 mmmax. Angle 180ºspringback Control independient (max. 30º)Former Relief at the end of the bending (max. 5º)max. Speed 10 sec./180º 6 sec./180ºPrograms 1 30bending Cycles 1 per program 10 per programCB die clamping manual automaticmain motor Power 2,0 HP = 1,5 KwInstallation single phase three-phases

Round tube Ø 50 x 3 mm = 2˝ OD = 1-½˝ GASSquare tube 35 x 35 x 3 mm = 1-½˝ OD x 1-½˝ ODSolid bar Ø 28 mm = 1-⅛˝ OD

INECOBasic QB-50 VDEplcwithout packaging 64 x 36 x 106 cm 64 x 36 x 106 cmwith packaging 85 x 51 x 125 cm 85 x 51 x 125 cmnet weight 130 kg. 165 kg.gross weight 145 kg. 180 kg.

INECOMax QB-76 VDMSplc QB-76 VDESplcwithout packaging 88 x 46 x 92 cm 88 x 46 x 92 cm 88 x 46 x 92 cmwith packaging 117 x 56 x 129 cm 117 x 56 x 129 cm 117 x 56 x 129 cmnet weight 240 kg. 250 kg. 265 kg.gross weight 265 kg. 275 kg. 280 kg.

INECOMax QB-76 VDMSplc QB-76 VDESplcmax. bending Radius 400 mmmin. bending Radius 10 mmmax. Angle 180ºspringback Control independent (max. 30º)Former Relief at the end of the bending (max. 5º)max. Speed 18 sec./180º 9 sec./180º 9 sec./180ºPrograms 1 30 30bending Cycles 1 per program 10 per program 10 per programCB die clamping manual manual automaticmain motor Power 2,5 HP = 1,9 Kw 5,5 HP = 4,0 Kw 5,5 HP = 4,0 KwInstallation three-phases

Round tube Ø 76 x 3 mm = 3˝ OD = 2-½˝ GASSquare tube 50 x 50 x 3 mm = 2˝ OD x 2˝ ODSolid bar Ø 40 mm = 1-⅝ ˝ OD

BENDING MACHINES

TECHNICAL FEATURES

INECOBasic and QB-50 VDEplc modelsBENDING

CAPACITY

BENDING CAPACITY

PARAMETERS

PARAMETERS

DIMENSIONS AND WEIGHT

DIMENSIONS AND WEIGHT

A T T

Aplicaciones Tecnológicas del Tubo S.L.

P.O. Box 1076E-31080 Pamplona (NAVARRA) - SPAINTel. +34 948 18 71 15 • +34 948 10 53 53Fax. +34 948 18 80 12attubo@attubo.comwww.attubo.com Made in EU www.attubo.com

INECOBasic Model► Control by microprocessor► Manual CB DIE Clamping

INECOMax Model► Control by microprocessor► Manual CB DIE Clamping

Capacityup to Ø 50 mm2" OD

▀

Capacityup to Ø 76 mm3" OD

▀

•Qualityandreliability•Electronicoverloaddevice•Lowmaintenance

•Savingoncostandtimeinvested•QPPTPositioningtableforperformingseveral

bendsinonetube•Portableunits

•Abletobendround,square,rectangulartubes,profilesandsolidbar

•Easytouseandprogramming•Quickchangeoftooling

QB-50 VDEplc Model (with QPPT accessory)

► Control by PLC► Automatic CB DIE Clamping

QB-76 VDESplc Model► Control by PLC► Automatic CB DIE Clamping

QB-76 VDMSplc Model► Control by PLC► Manual CB DIE Clamping