PRODUCT QUALITY - ENGINEERING EXPERTISE
SAFETY FOR PERSONNEL
ENVIRONMENTAL PROTECTION
PROCESS-RELIABILITY
OPERATING EFFICIENCY
PRODUCTIVITY GAINS
YOUR PEACE OF MIND
INCREASED PROFITS
www.axflow.co.uk
LEADING THE WAY TO
AxFlow Process Products
Hermetic
Wernert
Established: 1875 and canned pump manufacturer since 1951.
Identity: The leading European canned pump manufacturer, with over 100,000 pumps supplied worldwide.
Markets: Chemical, Petrochemical, Nuclear, RefrigerationLiquefied gases - Chlorine, Ammonia, SO3, SO2, VCM, and Phosgene.
Typical: Hydrocarbons-Benzene, Ethylene Oxide, Propylene, Applications LPG. Heat transfer and molten media
Acids-Hydrofluoric, Nitric, Sulphuric, Formic.
Configurations: End suction, rear pullout, multi stage, vertical in-tank / Submersible, cooled & non-cooled motor stators, heatedpump and motor jackets.
Standards: ISO2858, API685, ATEX.
Range: Flows from 0.5 to 1200 m3/h, Heads to 1200m, Temps from -120o C. to +480o C, Pressures to 1200 Bar and motor Power up to 325kW.
Established: 1927
Identity: The first non-metal pump manufacturer and leading “process designed” plastic pump manufacturer.
Markets: Chemical, Photographic, Metal finishing.
Typical Corrosive, erosive liquids, Odour control/Applications: Gas scrubbing, Effluent pits’.
Configurations: End suction, Rear pullout, vertical wet well, Cantilever shaft, canned and magnetically coupled, tank side mounted (glandless).
Standards: ISO2858, ATEX.
Range: Flows from 0.5 to 2300 m3/h, Heads to over 120m, Temps to 165o C, pressures to 16 bar.
AxFlow Process Pumps - the best solution for difficult pumping requirements
A complete range of pumps providing the optimum solution for your application
Lawrence
Bungartz
Established: 1935
Identity: Highly trained engineers, experienced in fields of mechanical design, advanced fluid dynamic analysis, andapplications engineering. With a world class materials management and manufacturing team operating throughsales and service offices around globe for the worlds most demanding industrial applications.
Markets: Petroleum, Petrochemical, steel, power/waste to energy and Environmental.
Typical Hot oils, Hydrocarbons, Slurries, Solid laden liquids, Applications: Synthetic fuels, Evaporators, High volume, Molten
Sulphur, Inorganic, Plastics, Molten metals, Liquefied gases, Abrasive/Corrosive liquids, Low shear/Low turbulence,Large and stringy solids.
Configurations: API-610, Fully lined, Submersible, Axial Flow, Vertical cantilever shaft, Jacketed, Cryogenic, Screw centrifugal.
Range: Flows to 34,000 m3/hr, Heads to 275m, Temperatures from -200o C to +900o C.
Established: 1947
Identity: Specialist pump manufacturer who developed hydrodynamic/expeller sealing principal. Now better known for the AN range of self regulating pumps which eliminate need for Level control instrumentation and can solve problems on applicationswith very poor suction conditions/low NPSHa.
Markets: Chemicals, Fertilisers, Nuclear, Power plants, waste water/effluent, Petrochemical.
Typical Condensate extraction, Vacuum filter discharges, Applications: hot/cold/weak and strong acids, Salt manufacturing,
slurries, single/dual/triple phase media, gas laden liquids, top and bottom road/rail tanker offloading.
Configurations: Horizontal, vertical, cantilever shaft, wet and dry well, Axial flow Hydrodynamic/mechanical seal/sealless gland arrangements.
Range: Flows to 1500m3/h, heads to 140m, temperatures to 300o C, pressures to 40barG.
TOXIC • HAZARDOUS • CORROSIVE • EROSIVE •
HIGH PRESSURE • POOR SUCTION CONDITIONS •
HIGH CONTAINMENT • LOW LIFE CYCLE COSTS •
CRYOGENIC TO MOLTEN METAL TEMPERATURES
AxFlow Gas Compressorsand Process Filtration
RPA Process FiltrationEstablished: 1962
Identity: Leading self cleaning filter manufacturer, complemented by ranges of replaceable media and vacuum filters.
Markets: Chemical, petrochemical, food & Beverage, Fine chemicals and pharmaceuticals, Mining, Water, Environmental and many others.
Typical Process, chemical, mineral and many other solids/ Applications: liquid separation solutions.
Configurations: Mechanically swept and backwash self cleaning filters. Bag and cartridge replaceable filter media filters. Drum and belt vacuum filters various filter media available
Standards: ASME, CODIP, ATEX
Range: Flows to 5000m3/h, pressures to over 100barg, temperatures to over 200o C Filtration down to 1 micron.
Burton CorblinEstablished: 1884 when Burton set up repair shop for pumps, and built his
first air compressors. In 1916 Corblin invented and patented the diaphragm compressor.
Identity: Leading manufacturer of diaphragm, small API618 Piston and “Periflow” process gas compressors.
Markets: Chemicals, Petrochemicals, Gas manufacturers, Nuclear, Power.
Typical Toxic, hazardous, flammable process gases Applications: eg H2, O2, Cl2, H2S, Wet HCl.
Configurations: Metallic Diaphragm, API618 Piston and Periflow Rotary designs.
Standards: API 618, ATEX.
Range: Capacities to 10000m3/h, pressures to 1000bar and powers to 1300kW
TES single & multi-stage steam turbinesShaft powers to20,000kW. Horizontalor vertically mounted,fully API 611 & 612compliant.
Dresser-RandCoppus, Nadrwoski & Murray Turbine Divisions
A range of high pressurepiston and plunger pumps.Simplex, Duplex, Triplexand Quintuplex versionsavailable for flow rates upto 2000litres/min, at pressures up to 700 bar.
FMC
Liquefied Gas canned pump High head and liquefied gascanned pump
Vertical, Wet well pump
Canned pump designed to handletoxic liquids with solids
Fully lined abrasion resistant API 610 pump
Diaphragm Compressor on a
pilot plant
Installing a fuel gas reciprocatingCompressor.
PeriflowCompressor onmolecular sieveregeneration
High volume evaporator circulation pump
Hydro-dynamicallysealed chemical
slurry pump
Self regulating/lowNPSHr pump withregulating vessel
Molten Liquid canned pumpwith heating jacket
Compressors
Lawrence Pumps
Bungartz
Hermetic
Italy - AxFlow S.p.A Tel: +39-02-484801; fax: +39 -02-48401926
Netherlands - AxFlow B.V. Tel: +31-36-538 12 11; fax: +31-36-531 40 04
Norway - AxFlow AS Tel: +47-22-73 67 00; fax: +47-22-73 67 86
Poland - AxFlow Sp. z o.o. Tel: +48-22-613 00 12; fax: +48-22-812 13 27
Portugal - AxFlow Lda Tel: +351-21-446 15 90; fax: +351-21-441 03 68
Spain - AxFlow S.A. Tel: +34-91-729 18 18; fax: +34-91-729 24 91
Sweden - AxFlow AB Tel: +46-8-602 22 00; fax: +46-8-91 66 66
Switzerland - AxFlow GmbH Tel: +41-62-849 61 64; fax: +41-62-849 61 65 AxFlow Holding AB (Sweden) Tel: +46-8-545 47 670; fax: +46-8-545 47 689
Austria - AxFlow GesmbH Tel: +43-316-68 35 09; fax: +43-316-68 34 92
Belgium - AxFlow n.v./s.a. Tel: +31-36-538 12 11; fax: +31-36-531 40 04
Czech Republic - AxFlow s.r.o. Tel: +420-2-72 10 11 80; fax: +420-2-72 10 11 89
Denmark - AxFlow A/S Tel: +45-7010-35 50; fax: +45-7010-35 55
Finland - AxFlow Oy Tel: +358-9-777 19 30; fax: +358-9-79 75 50
France - AxFlow S.A.S. Tel: +33-2-47 45 84 58; fax: +33-2-47-45 14 34
Germany - AxFlow GmbH Tel: +49-211-23 80 60; fax: +49-211-23 80 620
Hungary - AxFlow Kft. Tel: +36-24-46 01 26; fax: +36-24-46 21 75
Ireland - AxFlow Limited Tel: +353-18-30 07 44; fax: +353-18-30 00 17
AxFlow Limited (Head office - London)Orion Park, Northfield Avenue, Ealing, London W13 9SJ
Tel: 020 8579 2111; Fax: 020 8579 7326 Email: [email protected]
www.axflow.co.uk
AxFlow Limited (Aberdeen) Unit 3, Harlaw Centre, Howe Moss Crescent
Kirkhill Industrial Estate, Dyce, Aberdeen AB21 OGNTel: 01224 729367; Fax: 01224 729368 Email: [email protected]
AxFlow London AxFlow ScotlandThroughout Europe
Our experience - your success
Coppus Murray Nadrowski
Top Related