PRODUCT QUALITY - ENGINEERING EXPERTISE

SAFETY FOR PERSONNEL

ENVIRONMENTAL PROTECTION

PROCESS-RELIABILITY

OPERATING EFFICIENCY

PRODUCTIVITY GAINS

YOUR PEACE OF MIND

INCREASED PROFITS

www.axflow.co.uk

LEADING THE WAY TO

AxFlow Process Products

Hermetic

Wernert

Established: 1875 and canned pump manufacturer since 1951.

Identity: The leading European canned pump manufacturer, with over 100,000 pumps supplied worldwide.

Markets: Chemical, Petrochemical, Nuclear, RefrigerationLiquefied gases - Chlorine, Ammonia, SO3, SO2, VCM, and Phosgene.

Typical: Hydrocarbons-Benzene, Ethylene Oxide, Propylene, Applications LPG. Heat transfer and molten media

Acids-Hydrofluoric, Nitric, Sulphuric, Formic.

Configurations: End suction, rear pullout, multi stage, vertical in-tank / Submersible, cooled & non-cooled motor stators, heatedpump and motor jackets.

Standards: ISO2858, API685, ATEX.

Range: Flows from 0.5 to 1200 m3/h, Heads to 1200m, Temps from -120o C. to +480o C, Pressures to 1200 Bar and motor Power up to 325kW.

Established: 1927

Identity: The first non-metal pump manufacturer and leading “process designed” plastic pump manufacturer.

Markets: Chemical, Photographic, Metal finishing.

Typical Corrosive, erosive liquids, Odour control/Applications: Gas scrubbing, Effluent pits’.

Configurations: End suction, Rear pullout, vertical wet well, Cantilever shaft, canned and magnetically coupled, tank side mounted (glandless).

Standards: ISO2858, ATEX.

Range: Flows from 0.5 to 2300 m3/h, Heads to over 120m, Temps to 165o C, pressures to 16 bar.

AxFlow Process Pumps - the best solution for difficult pumping requirements

A complete range of pumps providing the optimum solution for your application

Lawrence

Bungartz

Established: 1935

Identity: Highly trained engineers, experienced in fields of mechanical design, advanced fluid dynamic analysis, andapplications engineering. With a world class materials management and manufacturing team operating throughsales and service offices around globe for the worlds most demanding industrial applications.

Markets: Petroleum, Petrochemical, steel, power/waste to energy and Environmental.

Typical Hot oils, Hydrocarbons, Slurries, Solid laden liquids, Applications: Synthetic fuels, Evaporators, High volume, Molten

Sulphur, Inorganic, Plastics, Molten metals, Liquefied gases, Abrasive/Corrosive liquids, Low shear/Low turbulence,Large and stringy solids.

Configurations: API-610, Fully lined, Submersible, Axial Flow, Vertical cantilever shaft, Jacketed, Cryogenic, Screw centrifugal.

Range: Flows to 34,000 m3/hr, Heads to 275m, Temperatures from -200o C to +900o C.

Established: 1947

Identity: Specialist pump manufacturer who developed hydrodynamic/expeller sealing principal. Now better known for the AN range of self regulating pumps which eliminate need for Level control instrumentation and can solve problems on applicationswith very poor suction conditions/low NPSHa.

Markets: Chemicals, Fertilisers, Nuclear, Power plants, waste water/effluent, Petrochemical.

Typical Condensate extraction, Vacuum filter discharges, Applications: hot/cold/weak and strong acids, Salt manufacturing,

slurries, single/dual/triple phase media, gas laden liquids, top and bottom road/rail tanker offloading.

Configurations: Horizontal, vertical, cantilever shaft, wet and dry well, Axial flow Hydrodynamic/mechanical seal/sealless gland arrangements.

Range: Flows to 1500m3/h, heads to 140m, temperatures to 300o C, pressures to 40barG.

TOXIC • HAZARDOUS • CORROSIVE • EROSIVE •

HIGH PRESSURE • POOR SUCTION CONDITIONS •

HIGH CONTAINMENT • LOW LIFE CYCLE COSTS •

CRYOGENIC TO MOLTEN METAL TEMPERATURES

AxFlow Gas Compressorsand Process Filtration

RPA Process FiltrationEstablished: 1962

Identity: Leading self cleaning filter manufacturer, complemented by ranges of replaceable media and vacuum filters.

Markets: Chemical, petrochemical, food & Beverage, Fine chemicals and pharmaceuticals, Mining, Water, Environmental and many others.

Typical Process, chemical, mineral and many other solids/ Applications: liquid separation solutions.

Configurations: Mechanically swept and backwash self cleaning filters. Bag and cartridge replaceable filter media filters. Drum and belt vacuum filters various filter media available

Standards: ASME, CODIP, ATEX

Range: Flows to 5000m3/h, pressures to over 100barg, temperatures to over 200o C Filtration down to 1 micron.

Burton CorblinEstablished: 1884 when Burton set up repair shop for pumps, and built his

first air compressors. In 1916 Corblin invented and patented the diaphragm compressor.

Identity: Leading manufacturer of diaphragm, small API618 Piston and “Periflow” process gas compressors.

Markets: Chemicals, Petrochemicals, Gas manufacturers, Nuclear, Power.

Typical Toxic, hazardous, flammable process gases Applications: eg H2, O2, Cl2, H2S, Wet HCl.

Configurations: Metallic Diaphragm, API618 Piston and Periflow Rotary designs.

Standards: API 618, ATEX.

Range: Capacities to 10000m3/h, pressures to 1000bar and powers to 1300kW

TES single & multi-stage steam turbinesShaft powers to20,000kW. Horizontalor vertically mounted,fully API 611 & 612compliant.

Dresser-RandCoppus, Nadrwoski & Murray Turbine Divisions

A range of high pressurepiston and plunger pumps.Simplex, Duplex, Triplexand Quintuplex versionsavailable for flow rates upto 2000litres/min, at pressures up to 700 bar.

FMC

Liquefied Gas canned pump High head and liquefied gascanned pump

Vertical, Wet well pump

Canned pump designed to handletoxic liquids with solids

Fully lined abrasion resistant API 610 pump

Diaphragm Compressor on a

pilot plant

Installing a fuel gas reciprocatingCompressor.

PeriflowCompressor onmolecular sieveregeneration

High volume evaporator circulation pump

Hydro-dynamicallysealed chemical

slurry pump

Self regulating/lowNPSHr pump withregulating vessel

Molten Liquid canned pumpwith heating jacket

Compressors

Lawrence Pumps

Bungartz

Hermetic

Italy - AxFlow S.p.A Tel: +39-02-484801; fax: +39 -02-48401926

Netherlands - AxFlow B.V. Tel: +31-36-538 12 11; fax: +31-36-531 40 04

Norway - AxFlow AS Tel: +47-22-73 67 00; fax: +47-22-73 67 86

Poland - AxFlow Sp. z o.o. Tel: +48-22-613 00 12; fax: +48-22-812 13 27

Portugal - AxFlow Lda Tel: +351-21-446 15 90; fax: +351-21-441 03 68

Spain - AxFlow S.A. Tel: +34-91-729 18 18; fax: +34-91-729 24 91

Sweden - AxFlow AB Tel: +46-8-602 22 00; fax: +46-8-91 66 66

Switzerland - AxFlow GmbH Tel: +41-62-849 61 64; fax: +41-62-849 61 65 AxFlow Holding AB (Sweden) Tel: +46-8-545 47 670; fax: +46-8-545 47 689

Austria - AxFlow GesmbH Tel: +43-316-68 35 09; fax: +43-316-68 34 92

Belgium - AxFlow n.v./s.a. Tel: +31-36-538 12 11; fax: +31-36-531 40 04

Czech Republic - AxFlow s.r.o. Tel: +420-2-72 10 11 80; fax: +420-2-72 10 11 89

Denmark - AxFlow A/S Tel: +45-7010-35 50; fax: +45-7010-35 55

Finland - AxFlow Oy Tel: +358-9-777 19 30; fax: +358-9-79 75 50

France - AxFlow S.A.S. Tel: +33-2-47 45 84 58; fax: +33-2-47-45 14 34

Germany - AxFlow GmbH Tel: +49-211-23 80 60; fax: +49-211-23 80 620

Hungary - AxFlow Kft. Tel: +36-24-46 01 26; fax: +36-24-46 21 75

Ireland - AxFlow Limited Tel: +353-18-30 07 44; fax: +353-18-30 00 17

AxFlow Limited (Head office - London)Orion Park, Northfield Avenue, Ealing, London W13 9SJ

Tel: 020 8579 2111; Fax: 020 8579 7326 Email: info@axflow.co.uk

www.axflow.co.uk

AxFlow Limited (Aberdeen) Unit 3, Harlaw Centre, Howe Moss Crescent

Kirkhill Industrial Estate, Dyce, Aberdeen AB21 OGNTel: 01224 729367; Fax: 01224 729368 Email: infoscot@axflow.co.uk

AxFlow London AxFlow ScotlandThroughout Europe

Our experience - your success

Coppus Murray Nadrowski