438
Euromas-Polyester
Euromas-Polyester, an enclosure avail-able in 26 sizes made of 30% glass-bead-reinforced polyester, has beendesigned to satisfy the highest stand-ards. It makes it possible for the userto employ a plastic enclosure in situa-tions where high robustness and chemical resistance are required.Used primarily as a terminal and distri-bution enclosure, its main applicationsare in the fields of electrical andmechanical engineering and shipbuild-ing, electroplating and petrochemicalindustry. A wide range of accessories is avail-able for all applications (DIN rails,
terminals, hinges, wall brackets, lead-sealable capstan headed screws).When fitted with oil and petrol resist-ant seals (neoprene or polyurethane-foamed lid seal), ingress protection upto IP 66 is guaranteed.A silicone seal is available as standardfor use in temperature ranges of around 130°. The captive lid screws are made ofV2A material and secured with screwlocking devices. For technical reasons,all screws – including for mounting plates – are screwed into threadedinserts. All Euromas-Polyester enclosu-res are UL-listed.
439
Standard enclosures External dimensions Silicone lid sealModel Order no. L W H Model Order no. P 303 04303000 55 55 37.0 – –P 305 04305000 80 75 56.5 P 305 SIL 04305100 P 311 04311000 110 75 56.5 P 311 SIL 04311100 P 316 04316000 160 75 56.5 P 316 SIL 04316100 P 319 04319000 190 75 56.5 P 319 SIL 04319100 P 322 04322000 230 75 56.5 P 322 SIL 04322100 P 323 04323000 55 55 59.0 – – P 324 04324000 110 75 75.5 P 324 SIL 04324100 P 325 04325000 160 75 75.5 P 325 SIL 04325100 P 326 04326000 80 75 75.5 P 326 SIL 04326100 P 327 04327000 230 75 75.5 P 327 SIL 04327100 P 329 04329000 190 75 75.5 P 329 SIL 04329100 P 330 04330000 160 160 91.0 P 330 SIL 04330100 P 331 04331000 220 120 91.0 P 331 SIL 04331100 P 332 04332000 122 120 91.0 P 332 SIL 04332100 P 333 04333000 260 160 91.0 P 333 SIL 04333100 P 334 04334000 360 160 91.0 P 334 SIL 04334100 P 336 04336000 320 100 81.0 P 336 SIL 04336100 P 337 04337000 255 250 121.0 P 337 SIL 04337100 P 338 04338000 255 250 161.0 P 338 SIL 04338100 P 339 04339000 360 360 91.0 P 339 SIL 04339100 P 340 04340000 400 250 161.0 P 340 SIL 04340100 P 341 04341000 400 405 121.0 P 341 SIL 04341100 P 342 04342000 600 250 121.0 P 342 SIL 04342100 P 345 04345000 560 160 91.0 P 345 SIL 04345100P 355 04355000 400 250 121.0 P 355 SIL 04355100
Notes:
– Cable glands, see page 614– Terminal assignment, see page 455– We will be happy to help you with
your special enclosure processingrequirements, for example with thefitting of cable glands
– All Euromas Polyester enclosures are UL-listed (UL file no. E 196 706)
Accessories (additional charge):
M: Mounting plate,sheet steel, galvanised
KP: Capstan-headed screw, sealable,2 screws per set
IS: Allen lid screwsE: Earthing bar, mounted
with clampsWL: Set of wall brackets = 4 pcsTS 15: Top hat rail DIN EN 60715 TH15TS 32: G-rail DIN EN 60715 G 32TS 35: Top hat rail DIN EN 60715 TH35SchD: Set of hinges, diecast
Enclosure material:Duroplastic UPpolyester, (25-30% glassfibrecontent); for technical data see pages 646-651.
Colour: Grey, similar toRAL 7000.
Scope of delivery: Upper and lowersection; lid screwsmade of V2A;earthing screws.
Ingress protection: max. IP 66/DIN EN 60529; increased protec-tion up to IP x7 on request.
Lid seal: Standard:Sponge cord(neoprene or poly-urethane, foamed)resistant up to 90° C.Silicone (SIL) version:Silicone seal resistant up to 130° C.For technical datasee page 651.
All dimensions in mm. Please refer to technical data.
P 303
P 305
Z-2401752
Z-2401753
440
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
*= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
Accessories described on pages 454-455.
Order designationEnclosures Order no.P 305 04305000P 305 SIL 04305100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000100KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21002800TS 32: G-rail DIN EN 60715 G 32 22001701TS 35: Top hat rail DIN EN 60715 TH35 22001702
51/50.6
66/65.6
80/79.6
28/2
7.6
61/6
0.6
75/7
4.6
68
80/79
59
8
45
75/7
4
33/3
2
66/6
5
1832
M4 M3
50/49
71/70
0.5
8.5
41.5
56.5
10.5
5 546
Ø 4
.5
(total height)
(max. assembly height)
5 6
4
2
3
1
15
Ø 7
.4
R6
lid
base
Order designationEnclosure Order no.P 303 04303000
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007905IS: Allen lid screws 21007900
29
1
9
5 26
55/54.5
55/5
4.5
34/33.5
43
43
46/4
5.5
Ø 4
.2
Ø 18
M3
4
2
3
1 5 6
55/54.5
45/4
4
55/5
4.5
46/45.5
(total height)
(max. assembly height)
lid
33/3245/44
33/3
2
34/3
3.5
R3
Ø 7
.28
5
37.5
base
Euromas-Polyester
P 311
P 316
Z-2401754
Z-2401755
441
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.P 316 04316000P 316 SIL 04316100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000300KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21003150TS 32: G-rail DIN EN 60715 G 32 22002010TS 35: Top hat rail DIN EN 60715 TH35 22002020
Ø 4
.5
131/130.6
146/145.6
160/159.6
28/2
7.6
61/6
0.6
75/7
4.6
148
160/159
8
75/7
4
45
33/3
2
66/6
5
130/129
151/150
72.585.5
139
M4 M3
Ø 7
.4
0.5
41.5
8.5
56.5
15
10.5
5 546
2
3
45
1
6
R6
(total height)
(max. assembly height)
lid
base
28/2
7.6
61/6
0.6
75/7
4.6
81/80.6
96/95
110/109.6
110/109
98
45
75/7
4
8
80/79
101/100
33/3
2
66/6
5
0.5
8.5
41.5
56.5
15
10.5 5
5 46
Ø 7
.4
Ø 4
.52
3
4 5
1
6
3272.5
89
(total height)
(max. assembly height)
lid
M4 M3
R6base
Order designationEnclosures Order no.P 311 04311000P 311 SIL 04311100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000200KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003100
P 319
P 322
Z-2401756
Z-2401757
442
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Accessories described on pages 454-455.
Order designationEnclosures Order no.P 322 04322000P 322 SIL 04322100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007940WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003310TS 32: G-rail DIN EN 60715 G 32 24003311TS 35: Top hat rail DIN EN 60715 TH35 24003312
Ø 4
.5
201/200.6
216/215.6
230/229.6
28/2
7.6
61/6
0.6
75/7
4.6
46/4
5.6
R8,5
51/5
0.6
209
218
230/229
200/199
221/220
45
75/7
4
33/3
2
66/6
5
M4
R6
0.5
41.5
56.5
8.5
15
Ø 7
.4
10.5
5 546
2
3
1
4 5
6
R6
(total height)
(max. assembly height)
lid
base
28/2
7.6
61/6
0.6
75/7
4.6
161/160.6
176/175.6
190/189.6
Ø 4
.5
45
75/7
4
33/3
2
66/6
5
178
190/189
160/159
181/180
R6
M4Ø
7.4
0.5
8.5
41.5
56.5
15
10.5
5 546
2
3
45
1
6169
(total height)
(max. assembly height)
lid
base
Order designationEnclosures Order no.P 319 04319000P 319 SIL 04319100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000400KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003300TS 32: G-rail DIN EN 60715 G 32 24003410TS 35: Top hat rail DIN EN 60715 TH35 24003315
Euromas-Polyester
P 323
P 324
Z-2401758
Z-2401759
443
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Ø 4
.5
28/2
7.6
61/6
0.6
75/7
4.6
81/80.6
96/95
110/109.6
98
110/109
80/79
101/100
45
75/7
4
33/3
2
66/6
5
0.5
9.5
60.5
75.5
15
Ø 7
.4
10.5
5 565
(total height)
(max. assembly height)
1
3
2
4 5 6
R6
M4
89
lid
base
Ø 4
.2
Ø 7
.2
1
9
51
5 48
45/44
55/54.5
33/32
33/3
2
45/4
4
55/5
4.5
55/53
45
34/33.5
46/44.5
18
34/3
2.5
46/4
4.5
45
55/5
3M3
(total height)
(max. assembly height)
3
1
2
4 5 6
R3lid
5
8
59
base
Order designationEnclosures Order no.P 324 04324000P 324 SIL 04324100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000200KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003100
Order designationEnclosure Order no.P 323 04323000
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007905IS: Allen lid screws 21007900WL: Set of wall brackets = 4 pcs 21004250
P 325
P 326
Z-2401760
Z-2401761
444
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Order designationEnclosures Order no.P 326 04326000P 326 SIL 04326100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21002800TS 32: G-rail DIN EN 60715 G 32 22001701TS 35: Top hat rail DIN EN 60715 TH35 22001702
Order designationEnclosures Order no.P 325 04325000P 325 SIL 04325100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000300KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 22002000TS 32: G-rail DIN EN 60715 G 32 22002010TS 35: Top hat rail DIN EN 60715 TH35 22002020
lid
Ø 4
.5
Ø 7
.4
51/50.6
66/65.5
80/79.6
28/2
7.6
61/6
0.6
75/7
4.6
68
80/79
45
75/7
4
33/3
2
66/6
5
50/49
71/70
59
M4
R6
0.5
9.5
60.5
75.5
15
10.5
5 565
3
1
2
45
6
(total height)
(max. assembly height)
lid
base
Ø 4
.5
28/2
7.8
61/6
0.6
75/7
4.6
131/130.6
146/145.6
160/159.6
148
160/159
45
75/7
4
66/6
5
33/3
2
130/129
151/150
R6
Ø 7
.4
0.5
9.5
60.5
75.5
15
10.5
5 565
1
3
2
45
6
(total height)
(max. assembly height)
lid
M4
139
base
Accessories described on pages 454-455.
Euromas-Polyester
P 327
P 329
Z-2401762
Z-2401764
445
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
201/200.6
216/215.6
230/229
28/2
7.6
46/4
5.6
61/6
0.6
75/7
4.6
218
230/229
45
75/7
4
Ø 4
.5
33/3
2
66/6
5
200/199
221/220
20951
/50.
6
Ø 8
0.5
9.5
60.5
75.5
15
10.5
5 565
R8,5R63
1
2
45 6
M4
(total height)
(max. assembly height)
R6
lid
base
(max. assembly height)
(total height)
65
65 55
10.5
15
75.5
60.5
9.5
0.5
Ø 4
.5
28/2
7.6
61/6
0.6
75/7
4.6
161/160.6
176/175.6
190/189.6
178
190/189
45
75/7
4
33/3
2
66/6
5
160/159
181/180
R6
169
M4
4
3
2
1
Ø 7
.4
lid
base
Order designationEnclosures Order no.P 327 04327000P 327 SIL 04327100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007940WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003310TS 32: G-rail DIN EN 60715 G 32 24003311TS 35: Top hat rail DIN EN 60715 TH35 24003312
Order designationEnclosures Order no.P 329 04329000P 329 SIL 04329100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000400KP: Capstan-headed screws, sealable 21007935IS: Allen lid screws 21007930WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 24003300TS 32: G-rail DIN EN 60715 G 32 24003410TS 35: Top hat rail DIN EN 60715 TH35 24003315
P 330
P 331
Z-2401765
Z-2401766
446
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Accessories described on pages 454-455.
Order designationEnclosures Order no.P 331 04331000P 331 SIL 04331100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001500KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21007990E: Earthing bar, mounted with clamps 21004700WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003310TS 32: G-rail DIN EN 60715 G 32 21003300TS 35: Top hat rail DIN EN 60715 TH35 21003320
Ø 6
.3
Ø 1
0.3
61/6
0
106/
105
120/
119
183/182
206/205
220/219
204
220/219
5282
120/
119
66/6
5
111/
110
180/179
211/210
1
22
66
91
25
11
5 580
193
M6
R8
(total height)
(max. assembly height)
65
4
3
2
1
lid
base
Ø 6
.5
Ø 1
1
114/113.5
142/141.5
160/159.5
84/8
3.5
142/
141.
5
160/
159.
5
76110
160/
159
90/8
9
148/
147
132
M6
140
160/159
120/119
148/147
R10
1
20
71
91
20
11.5
6 579
(total height)
65
4
3
2
1
lid
5.5
base anti-turn locking device
(max. assembly height)
Order designationEnclosures Order no.P 330 04330000P 330 SIL 04330100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001700KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007970E: Earthing bar, mounted with clamps 21004800WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 22001901TS 32: G-rail DIN EN 60715 G 32 21003400TS 35: Top hat rail DIN EN 60715 TH35 21003410
Euromas-Polyester
P 332
P 333
Z-2401767
Z-2401768
447
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.P 332 04332000P 332 SIL 04332100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001600KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21007990E: Earthing bar, mounted with clamps 21004600WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003205TS 32: G-rail DIN EN 60715 G 32 21003200TS 35: Top hat rail DIN EN 60715 TH35 21003210
Order designationEnclosures Order no.P 333 04333000P 333 SIL 04333100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001800KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007970E: Earthing bar, mounted with clamps 21004900WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003505TS 32: G-rail DIN EN 60715 G 32 21003500TS 35: Top hat rail DIN EN 60715 TH35 21003510
Ø 6
.3
85/84
108/107
122/121
61/6
0
106/
105
120/
119
82/81
113/112
106
122/121
5282
120/
119
66/6
5
111/
110
1
22
66
91
25
Ø 1
0.3
11
5 580
5
95
M6
(total height)
(max. assembly height)
65
4
3
2
1
lid
R8
baseanti-turn locking device
Ø 6
.5
Ø 1
1
214/213.5
242/241.5
260/259.5
84/8
3.5
142/
141.
5
160/
159.
5
76110
160/
159
240
260/259
220/219
248/247
90/8
9
148/
147
1
20
71
91
20
11.5
6 579
(total height)
(max. assembly height)
65
4
3
2
1
R10
232
M6
lid
base
P 334
P 336
Z-2401769
Z-2401770
448
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Order designationEnclosures Order no.P 336 04336000P 336 SIL 04336100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000430KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007970WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 24003400
Accessories described on pages 454-455.
Ø 6
.5
41/4
084
/83
100/
99
283/282304/303
320/319
304320/317.9
288/286
295310/309
62
100/
98
46/4
4
90/8
8
R10
M4
Ø 1
0.3
122
61
81
20
11.55 570
(total height)
(max. assembly height)
5 6
4
2
3
1
lid
base
Ø 6
.5
Ø 1
1
314/313.5342/341.5360/359.5
84/8
3.5
142/
141.
516
0/15
9.5
76110
160/
159
90/8
9
148/
147
340360/359
320/319
348/347
120
71
91
20
11.56 579
(total height)
(max. assembly height)
65
4
3
2
1
R10
332
M6
lid
base
Order designationEnclosures Order no.P 334 04334000P 334 SIL 04334100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001900KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007970E: Earthing bar, mounted with clamps 21005000WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003340TS 35: Top hat rail DIN EN 60715 TH35 21003350
Euromas-Polyester
P 337
P 338
Z-2401771
Z-2401772
449
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
174/
172
232/
230
250/
248
209/207237/235255/253
235255/254
100
200
250/
249
180/
179
238/
237
215/214243/242
Ø 6
.5
1
2096
16165
Ø 1
1
11.56 5149
227
M6
(total height)
(max. assembly height)
5 6
4
2
3
1
R10
lid
base
Ø 6
.5
Ø 1
1
174/
173
232/
231
250/
249
209/208
237/236
255/254
235255/254
215/214
243/242
100
200
250/
249
180/
179
238/
237
1
2096
12125
6 5109
11.5
227
(total height)
(max. assembly height)
5 6
4
2
3
1
R10
lid
base
Order designationEnclosures Order no.P 338 04338000P 338 SIL 04338100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000440KP: Capstan-headed screws, sealable 21008025IS: Allen lid screws 21008020E: Earthing bar, mounted with clamps 21004900WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 24003750TS 35: Top hat rail DIN EN 60715 TH35 24003760
Order designationEnclosures Order no.P 337 04337000P 337 SIL 04337100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000440KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21007990E: Earthing bar, mounted with clamps 21004900WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 24003750TS 35: Top hat rail DIN EN 60715 TH35 24003760
P 339
P 340
Z-2401773
Z-2401774
450
*
*= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
Accessories described on pages 454-455.
Order designationEnclosures Order no.P 340 04340000P 340 SIL 04340100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000460KP: Capstan-headed screws, sealable 21008025IS: Allen lid screws 21008020E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
Order designationEnclosures Order no.P 339 04339000P 339 SIL 04339100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000450KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007970E: Earthing bar, mounted with clamps 21005000WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003340TS 35: Top hat rail DIN EN 60715 TH35 21003350
354/352382/380400/398
174/
172
232/
230
250/
248
380400/398
Ø 6
.5
Ø 1
1
201
96161
65
11.56 5149
360/358388/386
100
200
250/
248
180/
178
238/
236
372
M6
1
3
2
5
4
6
(max. assembly height)
(total height)
base
lid
R10
314/313342/341360/359
284/
283
342/
241
360/
359
136
270
310
360/
359
290/
289
348/
347
340360/359
320/319348/347
330
M6
R10
Ø 6
.5
Ø 1
1
0.819.8
70.890.8
20
5.5
11.56 579
1
3
2
5
4
6
(max. assembly height)
lid
baseanti-turn locking device
(total height)
Euromas-Polyester
P 341
P 342
Z-2401775
Z-2401776
451
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
*
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.P 342 04342000P 342 SIL 04342100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000500KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21008000E: Earthing bar, mounted with clamps 21005500WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004150TS 35: Top hat rail DIN EN 60715 TH35 21004160
554/553582/581600/599
174/
173
232/
231
250/
249
100
200
250/
248
180/
178
238/
236
580600/598
560/558588/586
204/
203
210/
208
R10
R10
572
M6
Ø 6
.5
Ø 1
1
120
96121
25
11.56 5109
R13
(total height)
(max. assembly height)
6
4
5
2
3
1
base
lid
354/353382/381400/399
329/
328
387/
386
405/
404
380400/398
360/358388/386
250
355
405/
403
335/
333
393/
391
372
M6
Ø 6
.5
Ø 1
1
120
96121
25
11.56
5109
R10
(total height)
(max. assembly height)
6
4
5
2
3
1
lid
base
Order designationEnclosures Order no.P 341 04341000P 341 SIL 04341100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000470KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21007990E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
P 345
P 355
Z-2401777
Z-2401778
452
*
*= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
= Dimension reduced at bottom due to conical form.Tolerances to DIN 16901-130.
Accessories described on pages 454-455.
354/353382/381400/399
174/
173
232/
231
250/
249
380400/398
100
200
250/
248
180/
178
238/
236
360/358388/386
Ø 6
.5
Ø 1
1
120
96121
25
11.56 5109
R10
372
M6
(total height)
(max. assembly height)
6
4
5
2
3
1
base
lid
Order designationEnclosures Order no.P 355 04355000P 355 SIL 04355100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 24000460KP: Capstan-headed screws, sealable 21007995IS: Allen lid screws 21007990E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
Order designationEnclosures Order no.P 345 04345000P 345 SIL 04345100(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002000KP: Capstan-headed screws, sealable 21007975IS: Allen lid screws 21007980E: Earthing bar, mounted with clamps 21005100WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003700TS 35: Top hat rail DIN EN 60715 TH35 21003710
514/513.5542/541.5560/559.5
160/
159.
5
84/8
3.5
142/
141.
5
160/
159
76 110 90
/89
148/
147
540560/559
520/519548/547
R10
R10
532
120/
119
114/
113.
5
R13
Ø 6
.5
Ø 1
1
120
7191
20
11.56 579
(total height)
(max. assembly height)
6
4
5
2
3
1
lid
base
M6
Euromas-Polyester
453Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Euromas small cabinets
By adding hinges, you can create aninteresting series of small cabinets on the basis of the tried-and-testedEuromas programme (aluminium,ABS, polycarbonate).
Different hinge and fastening technologies are available. Please contact us with details of your requirements.
Technical data (enclosure dimensions,materials, etc.) and the appropriateset of hinges can be found in the relevant Euromas programme.
454
Z-2001663
Order designation Order no.SchD: Set of hinges, 21007800
diecast
Cabinet version:If you want your enclosure(s) to befitted with hinges, please orderseparately:
additional charge for fitting.
TS 15: Top hat rail DIN EN 60715 TH15 TS 32: G-rail DIN EN 60715 G 32TS 35: Top hat rail DIN EN 60715 TH35
E: Earthing bar,mounted with clamps
WL: Set of wall brackets = 4 pcs
M: Mounting plate,sheet steel, galvanised
KP: Capstan-headed screws,sealable, set = 2 pcs
IS: Allen head screws,set = 4 pcs
Model M KP IS E WL TS 15 TS 32 TS 35P 303 – 21007905 21007900 – – – – –P 305 24000100 21007935 21007930 – 21004250 21002800 22001701 22001702P 311 24000200 21007935 21007930 – 21004250 24003100 – –P 316 24000300 21007935 21007930 – 21004250 21003150 22002010 22002020P 319 24000400 21007935 21007930 – 21004250 24003300 24003410 24003315P 322 – 21007935 21007940 – 21004250 24003310 24003311 24003312P 323 – 21007905 21007900 – – – – –P 324 24000200 21007935 21007930 – 21004250 24003100 – –P 325 24000300 21007935 21007930 – 21004250 22002000 22002010 22002020P 326 – 21007935 21007930 – 21004250 21002800 22001701 22001702P 327 – 21007935 21007940 – 21004250 24003310 24003311 24003312P 329 24000400 21007935 21007930 – 21004250 24003300 24003410 24003315P 330 21001700 21007975 21007970 21004800 21004300 22001901 21003400 21003410P 331 21001500 21007995 21007990 21004700 21004300 21003310 21003300 21003320P 332 21001600 21007995 21007990 21004600 21004300 21003205 21003200 21003210P 333 21001800 21007975 21007970 21004900 21004300 21003505 21003500 21003510P 334 21001900 21007975 21007970 21005000 21004300 – 21003340 21003350P 336 24000430 21007975 21007970 – 21004300 24003400 – –P 337 24000440 21007995 21007990 21004900 21004300 – 24003750 24003760P 338 24000440 21008025 21008020 21004900 21004300 – 24003750 24003760P 339 24000450 21007975 21007970 21005000 21004300 – 21003340 21003350P 340 24000460 21008025 21008020 21005400 21004300 – 21004100 21004110P 341 24000470 21007995 21007990 21005400 21004300 – 21004100 21004110P 342 24000500 21007995 21008000 21005500 21004300 – 21004150 21004160P 345 21002000 21007975 21007980 21005100 21004300 – 21003700 21003710P 355 24000460 21007995 21007990 21005400 21004300 – 21004100 21004110
Euromas-Polyester accessories
455All dimensions in mm. Please refer to technical data.
Phoenix WeidmüllerMBK 2.5 MBK 3 MBK 5 UK 3 N UK 5 N UK 10 N AKZ 1.5 AKZ 2.5 AKZ 4 SAK 2.5 SAK 4
DIN-rail TS 15 X X X X X XDIN-rail TS 32 X X X X XDIN-rail TS 35 X X XBridgeable X X X X X X X X X XEnd angle-piece 2 2 2 2 2 2 2 2 2 2 2Closing plate – 1 1 1 1 1 1 1 1 1 1Connection cross-section(mm2) fine-strand 1.5 2.5 4 2.5 4 10 1.5 2.5 4 2.5 4Connection cross-section(mm2) single-wire 2.5 4 4 4 6 16 2.5 4 6 4 10Nominal voltage (V) 500 500 500 750 750 800 400 250 500 800 800Rating (A) 26 32 34 34 34 76 17.5 24 32 24 32Terminal width (mm) 5.2 5.2 6.2 5.2 6.2 10.2 5 5 6 6 6.5
Model Number per DIN-rail Number per DIN-railP 300 1 x MK3/4 or 1 x BK4 terminal blockP 305 7 7 6 6P 311 13 13 11 12P 316 23 23 19 22P 319 29 29 24 28P 322 36 36 30 36P 323 1 x MK3/4 or 1 x BK4 terminal blockP 324 13 13 11 12 12 10P 325 23 23 19 22 22 18P 326 7 7 6 6 6 5P 327 36 36 30 36 36 30P 329 28 28 24 28 28 23P 330 19 16 10 16 1.5P 331 30 26 15 26 24P 332 12 10 6 10 9P 333 38 32 20 33 31P 334 57 48 29 50 46P 336 50 42 25 43 40P 337 37 31 19 32 30P 338 37 31 19 31 30P 339 57 48 29 50 46P 340 65 55 33 56 52P 341 65 55 33 56 52P 342 104 57 53 90 83P 345 96 80 49 83 77P 355 65 55 33 56 52
Maximum assignmentwith terminal blocks
Top Related