3 Euromas Alu D GB F - RFE
28
410 Euromas-Aluminium IP 66 and the exceptionally high stress- resistant qualities of aluminium make this an ideal enclosure line when opti- mal protection is required. 43 different enclosure dimensions and a series of accessories provide the best- possible solutions for a wide range of applications. On request, the enclosures are avail- able in special colours, or uncoated. If you require extremely high protec- tion, the enclosures can be fitted with special EMC screening, or coated with special sea-water resistant lacquer. When fitted with hinges and locks, the enclosures are suitable for use as small, sturdy cabinets. Different lock and hinge systems are available for this purpose. All Euromas aluminium enclosures are UL-listed.
Transcript of 3 Euromas Alu D GB F - RFE
410
Euromas-Aluminium
IP 66 and the exceptionally high stress-resistant qualities of aluminium makethis an ideal enclosure line when opti-mal protection is required. 43 different enclosure dimensions anda series of accessories provide the best-possible solutions for a wide range ofapplications.On request, the enclosures are avail-able in special colours, or uncoated.
If you require extremely high protec-tion, the enclosures can be fitted withspecial EMC screening, or coated withspecial sea-water resistant lacquer.When fitted with hinges and locks, theenclosures are suitable for use as small,sturdy cabinets.Different lock and hinge systems areavailable for this purpose.All Euromas aluminium enclosures areUL-listed.
411
Standard 500+ pcs with With siliconeenclosusres External dim. clear lid lid sealModel Order no. L W H Model Order no. Model Order no.A 100 01100000 50 45 30.0 A 100 SIL 01100010 A 101 01101000 58 64 34.0 A 101 G 01101500 A 101 SIL 01101010 A 102 01102000 98 64 34.0 A 102 G 01102500 A 102 SIL 01102010 A 103 01103000 150 64 34.0 A 103 SIL 01103010 A 104 01104000 115 64 34.5 A 104 SIL 01104010A 105 01105000 75 80 57.0 A 105 G 01105500 A 105 SIL 01105010 A 106 01106000 186 64 34.5 A 106 SIL 01106010A 110 01110000 125 80 57.0 A 110 G 01110500 A 110 SIL 01110011A 114 01114000 200 100 81.0 A 114 SIL 01114010 A 115 01115000 175 80 57.0 A 115 G 01115500 A 115 SIL 01115010 A 116 01116000 100 100 81.0 A 116 SIL 01116010A 117 01117000 250 80 52.0 A 117 SIL 01117010A 118 01118000 160 100 81.0 A 118 SIL 01118010A 119 01119000 122 120 81.0 A 119 SIL 01119010A 120 01120000 122 120 91.0 A 120 SIL 01120010A 121 01121000 140 140 91.0 A 121 SIL 01121010A 122 01122000 220 120 81.0 A 122 SIL 01122010A 123 01123000 220 120 91.0 A 123 SIL 01123011A 124 01124000 360 120 81.0 A 124 SIL 01124010A 125 01125000 160 160 91.0 A 125 SIL 01125011A 126 01126000 200 140 91.0 A 126 SIL 01126010A 127 01127000 180 180 101.0 A 127 SIL 01127010A 130 01130000 260 160 91.0 A 130 SIL 01130011A 131 01131000 280 180 101.0 A 131 SIL 01131010A 135 01135000 360 160 91.0 A 135 SIL 01135011A 138 01138000 560 160 91.0 A 138 SIL 01138010A 140 01140000 200 230 111.0 A 140 SIL 01140010A 145 01145000 230 100 111.0 A 145 SIL 01145010A 150 01150000 200 230 180.0 A 150 SIL 01150010 A 155 01155000 280 230 111.0 A 155 SIL 01155010A 160 01160000 330 230 111.0 A 160 SIL 01160010A 165 01165000 330 230 181.0 A 165 SIL 01165010A 168 01168000 400 230 111.0 A 168 SIL 01168010A 169 01169000 600 230 111.0 A 169 SIL 01169010A 170 01170000 400 230 225.0 A 170 SIL 01170010A 175 01175000 400 310 111.0 A 175 SIL 01175010A 180 01180000 400 310 141.0 A 180 SIL 01180010A 185 01185000 400 310 181.0 A 185 SIL 01185010A 190 01190000 400 310 227.0 A 190 SIL 01190010A 195 01195000 420 240 209.5 A 195 SIL 01195010A 196 01196000 600 310 111.0 A 196 SIL 01196010A 197 01197000 600 310 181.0 A 197 SIL 01197010A 198 01198000 600 600 202.5 A 198 SIL 01198010
Enclosure material:Cast alloyG AL Si 12.For technical datasee pages 646-655.
Colour: Silver-grey,similar to RAL 7001,powder-coated.Special colourson request.
Scope of delivery: Upper and lower section: lid screws,made of V2A,earthing screw.
Ingress protection: IP 66/DIN EN 60529;increased protection up to IP x7 on request.
Lid seal: Sponge cord(neoprene or poly-urethane, foamed) in lid groove.For technical datasee page 651.
Accessories (additional charge):
M: Mounting plate,sheet steel, galvanised
KP: Capstan-headed screw,sealable, 2 screws per set
IS: Allen head screw,4 screws per set
E: Earthing bar,mounted with clamps
WL: Set of wall brackets = 4 pcsTS 15: Top hat rail DIN EN 60715 TH15TS 32: G-rail DIN EN 60715 G 32TS 35: Top hat rail DIN EN 60715 TH35SchD: Set of hinges diecast
Notes:
– SWB type (saltwater-proof).Available on request: washing - passivating - powder-coating for saltwater-proof applications or for applications requiring higher levels of anti-corrosion protection.
– EMC version for higher protectionagainst electromagnetic interferenceon request.
– Cable glands see page 614 ff.– Terminal assignment see page 435.– For Vestamid and aluminium enclo-
sures with F05 insertion openingsee page 436-437.
– All aluminium enclosures are listedunder UL file no. E 196 706.
– Use of the pressure compensationelement for equalising variations inpressure caused by temperaturedifferences is possible, see page 640.
All dimensions in mm. Please refer to technical data.
Enclosures with F05insertion openingsee page 436-437.
Note
412
A 101
Z-2401709
Z-2401710
A 100
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 101 01101000A 101 SIL 01101010A 101 G, 500+ pcs 01101500(SIL = lid with silicone seal,G = with transparent lid)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21002650
Order designationEnclosures Order no.A 100 01100000A 100 SIL 01100010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007910
Euromas-Aluminium
A 103
Z-2401711
Z-2401712
A 102
413
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 103 01103000A 103 SIL 01103010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21002700
Order designationEnclosures Order no.A 102 01102000A 102 SIL 01102010A 102 G, 500+ pcs 01102500(SIL = lid with silicone seal,G = with transparent lid)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21002600
A 104
A 105
Z-2401713
Z-2401714
414
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 105 01105000A 105 SIL 01105010A 105 G, 500+ pcs 01105500(SIL = lid with silicone seal,G = with transparent lid)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001100KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21002800
Order designationEnclosures Order no.A 104 01104000A 104 SIL 01104010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920
Euromas-Aluminium
A 106
A 110
Z-2401715
Z-2401716
415
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 110 01110000A 110 SIL 01110011A 110 G, 500+ pcs 01110500(SIL = lid with silicone seal,G = with transparent lid)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001200KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21002900TS 35: Top hat rail DIN EN 60715 TH35 21002920
Order designationEnclosures Order no.A 106 01106000A 106 SIL 01106010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 24003300
A 114
A 115
Z-2401717
Z-2401718
416
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 115 01115000A 115 SIL 01115010A 115 G, 500+ pcs 01115500(SIL = lid with silicone seal,G = with transparent lid)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001300KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21003000
Order designationEnclosures Order no.A 114 01114000A 114 SIL 01114010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001202KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21002950TS 32: G-rail DIN EN 60715 G 32 21002960
Euromas-Aluminium
A 116
A 117
Z-2401719
Z-2401720
417
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 20/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
cylinder screw M4 x 24/7 similar to DIN EN ISO 1207
(total height)
(max. assembly height)
lid
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 117 01117000A 117 SIL 01117010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920TS 15: Top hat rail DIN EN 60715 TH15 21003100
Order designationEnclosures Order no.A 116 01116000A 116 SIL 01116010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001310KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21003050
418
A 118
A 119
Z-2401721
Z-2401722
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)anti-turn locking device
(total height)
base
lid
cylinder screw M4 x 24/7 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
65
(max. assembly height)
(total height)
43
2
1
20
103
ø 8
/ø 7
*
ø 4
.8
19
61
39.5
81
74
ø 3.2
27.9
50/4
8 *
130/128 *148/146 *160/159 *
88/8
6 *
100/
99 *
R 7
54/5
2 *
92/9
0 *M4
42
140146
160/158 *
131/130 *152/150 *
6610
0/98
*
base
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 119 01119000A 119 SIL 01119010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001600KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004600WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003205TS 32: G-rail DIN EN 60715 G 32 21003200TS 35: Top hat rail DIN EN 60715 TH35 21003210
Order designationEnclosures Order no.A 118 01118000A 118 SIL 01118010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001320KP: Capstan-headed screws, sealable 21007915IS: Allen head screws 21007920WL: Set of wall brackets = 4 pcs 21004250TS 15: Top hat rail DIN EN 60715 TH15 21003150TS 32: G-rail DIN EN 60715 G 32 21003160
A 120
A 121
Z-2401723
Z-2401724
419
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 121 01121000A 121 SIL 01121010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001610KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004650WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003250TS 35: Top hat rail DIN EN 60715 TH35 21003260
Order designationEnclosures Order no.A 120 01120000A 120 SIL 01120010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001600KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004600WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003205TS 32: G-rail DIN EN 60715 G 32 21003200TS 35: Top hat rail DIN EN 60715 TH35 21003210
A 122
A 123
Z-2401725
Z-2401726
420
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 123 01123000A 123 SIL 01123011(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001500KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004700WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003310TS 32: G-rail DIN EN 60715 G 32 21003300TS 35: Top hat rail DIN EN 60715 TH35 21003320
Order designationEnclosures Order no.A 122 01122000A 122 SIL 01122010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001500KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004700WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003310TS 32: G-rail DIN EN 60715 G 32 21003300TS 35: Top hat rail DIN EN 60715 TH35 21003320
A 124
A 125
Z-2401727
Z-2401728
421
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
anti-turn locking device
(total height)
base
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 125 01125000A 125 SIL 01125011(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001700KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004800WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003400TS 35: Top hat rail DIN EN 60715 TH35 21003410
Order designationEnclosures Order no.A 124 01124000A 124 SIL 01124010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001550KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005000WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003340TS 35: Top hat rail DIN EN 60715 TH35 21003350
A 126
A 127
Z-2401729
Z-2401730
422
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Euromas-Aluminium
Order designationEnclosures Order no.A 127 01127000A 127 SIL 01127010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001720KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004860WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003470TS 35: Top hat rail DIN EN 60715 TH35 21003480
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 126 01126000A 126 SIL 01126010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001710KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004850WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003450TS 35: Top hat rail DIN EN 60715 TH35 21003460
A 130
A 131
Z-2401731
Z-2401732
423
lid
cylinder screw M6 x 35/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 131 01131000A 131 SIL 01131010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001810KP: Capstan-headed screws, sealable 21007995IS: Allen head screws 21007990E: Earthing bar, mounted with clamps 21004950WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003550TS 35: Top hat rail DIN EN 60715 TH35 21003560
Order designationEnclosures Order no.A 130 01130000A 130 SIL 01130011(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001800KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004900WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21003505TS 32: G-rail DIN EN 60715 G 32 21003500TS 35: Top hat rail DIN EN 60715 TH35 21003510
A 135
A 138
Z-2401733
Z-2401734
424
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 138 01138000A 138 SIL 01138010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002000KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007960E: Earthing bar, mounted with clamps 21005100WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003700TS 35: Top hat rail DIN EN 60715 TH35 21003710
Order designationEnclosures Order no.A 135 01135000A 135 SIL 01135011(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21001900KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005000WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003340TS 35: Top hat rail DIN EN 60715 TH35 21003350
A 140
A 145
Z-2401735
Z-2401736
425
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)
(total height)
base
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 145 01145000A 145 SIL 01145010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002110KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003850TS 35: Top hat rail DIN EN 60715 TH35 21003860
Order designationEnclosures Order no.A 140 01140000A 140 SIL 01140010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002100KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004850WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003800TS 35: Top hat rail DIN EN 60715 TH35 21003810
426
A 150
A 155
Z-2401737
Z-2401738
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 155 01155000A 155 SIL 01155010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002120KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005250WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003870TS 35: Top hat rail DIN EN 60715 TH35 21003880
Order designationEnclosures Order no.A 150 01150000A 150 SIL 01150010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002100KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21004850WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003800TS 35: Top hat rail DIN EN 60715 TH35 21003810
A 160
Z-2401739
427
A 165
Z-2401740
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)base
(total height)
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 165 01165000A 165 SIL 01165010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002200KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005300WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003900TS 35: Top hat rail DIN EN 60715 TH35 21003910
Order designationEnclosures Order no.A 160 01160000A 160 SIL 01160010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002200KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005300WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21003900TS 35: Top hat rail DIN EN 60715 TH35 21003910
A 168
A 169
Z-2401741
Z-2401742
428
lid
cylinder screwM6 x 25/10 similar toDIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)base
(total height)
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 169 01169000A 169 SIL 01169010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002410KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007960E: Earthing bar, mounted with clamps 21005500WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004150TS 35: Top hat rail DIN EN 60715 TH35 21004160
Order designationEnclosures Order no.A 168 01168000A 168 SIL 01168010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002400KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
A 170
A 175
Z-2401743
Z-2401744
429
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 13/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 175 01175000A 175 SIL 01175010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002420KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
Order designationEnclosures Order no.A 170 01170000A 170 SIL 01170010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002400KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
A 180
A 185
Z-2401745
Z-2401746
430
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
Euromas-Aluminium
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 185 01185000A 185 SIL 01185010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002420KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
Order designationEnclosures Order no.A 180 01180000A 180 SIL 01180010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002420KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
A 190
A 195
Z-2401747
Z-2401751
431
lid
cylinder screw M6 x 30/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 195 01195000A 195 SIL 01195010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002500KP: Capstan-headed screws, sealable 21007975IS: Allen head screws 21007970E: Earthing bar, mounted with clamps 21005600WL: Set of wall brackets = 4 pcs 21004300TS 15: Top hat rail DIN EN 60715 TH15 21004210TS 32: G-rail DIN EN 60715 G 32 21004200TS 35: Top hat rail DIN EN 60715 TH35 21004205
Order designationEnclosures Order no.A 190 01190000A 190 SIL 01190010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002420KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007950E: Earthing bar, mounted with clamps 21005400WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004100TS 35: Top hat rail DIN EN 60715 TH35 21004110
A 196
A 197
Z-2401748
Z-2401749
432
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
lid
cylinder screw M6 x 25/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)base
(total height)
Accessories described on pages 434-435.
Order designationEnclosures Order no.A 197 01197000A 197 SIL 01197010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002510KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007960E: Earthing bar, mounted with clamps 21005650WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004150TS 35: Top hat rail DIN EN 60715 TH35 21004160
Order designationEnclosures Order no.A 196 01196000A 196 SIL 01196010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002510KP: Capstan-headed screws, sealable 21007955IS: Allen head screws 21007960E: Earthing bar, mounted with clamps 21005650WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004150TS 35: Top hat rail DIN EN 60715 TH35 21004160
Euromas-Aluminium
A 198
Z-2401750
433
lid
cylinder screw M6 x 45/10 similar to DIN EN ISO 1207
*= Dimension reduced at bottom due to conical form. Tolerances to GTA 14/5 DIN 1688
(max. assembly height)
base
(total height)
Processing (drilling, milling, printing) and terminal assignment on request.All dimensions in mm. Please refer to technical data.
Order designationEnclosures Order no.A 198 01198000A 198 SIL 01198010(SIL = lid with silicone seal)
Accessories (additional charge) Order no.M: Mounting plate, sheet steel, galv. 21002520IS: Allen head screws 21008010WL: Set of wall brackets = 4 pcs 21004300TS 32: G-rail DIN EN 60715 G 32 21004170TS 35: Top hat rail DIN EN 60715 TH35 21004180
Important: Because of the wall fixingdrill holes inside the sealed section of the enclosure, expert sealing of the wallfixing is necessary to attainingress protection IP 66.
434
Z-2001663
Z-2001663
TS 15: Top hat rail DIN EN 60715 TH15 TS 32: G-rail DIN EN 60715 G 32 TS 35: Top hat rail DIN EN 60715 TH35
IS: Allen head screwsE: Earthing bar,
mounted with clampsWL: Set of wall brackets = 4 pcs
Order designation Order no.SchD: Set of hinges
diecast 21007800
M: Mounting plate,sheet steel, galvanised
KP: Capstan-headed screw,sealable, set = 2 pcs
Cabinet version:If you want your enclosure(s) fittedwith hinges, please order separately:additional charge for fitting.
Model M KP IS E WL TS 15 TS 32 TS 35A 100 – 21007915 21007910 – – – – –A 101 – 21007915 21007920 – – 21002650 – –A 102 – 21007915 21007920 – – 21002600 – –A 103 – 21007915 21007920 – – 21002700 – –A 104 – 21007915 21007920 – – – – –A 105 21001100 21007915 21007920 – – 21002800 – –A 106 – 21007915 21007920 – – 24003300 – –A 110 21001200 21007915 21007920 – – 21002900 – 21002920A 114 21001202 21007915 21007920 – 21004250 21002950 21002960 –A 115 21001300 21007915 21007920 – – 21003000 – –A 116 21001310 21007915 21007920 – 21004250 21003050 – –A 117 – 21007915 21007920 – – 21003100 – –A 118 21001320 21007915 21007920 – 21004250 21003150 21003160 –A 119 21001600 21007955 21007950 21004600 21004300 21003205 21003200 21003210A 120 21001600 21007995 21007990 21004600 21004300 21003205 21003200 21003210A 121 21001610 21007995 21007990 21004650 21004300 – 21003250 21003270A 122 21001500 21007955 21007950 21004700 21004300 21003310 21003300 21003320A 123 21001500 21007995 21007990 21004700 21004300 21003310 21003300 21003320A 124 21001550 21007955 21007950 21005000 21004300 – 21003340 21003350A 125 21001700 21007955 21007950 21004800 21004300 – 21003400 21003410A 126 21001710 21007995 21007990 21004850 21004300 – 21003450 21003470A 127 21001720 21007995 21007990 21004860 21004300 – 21003470 21003480A 130 21001800 21007955 21007950 21004900 21004300 21003505 21003500 21003510A 131 21001810 21007995 21007990 21004950 21004300 – 21003550 21003560A 135 21001900 21007955 21007950 21005000 21004300 – 21003340 21003350A 138 21002000 21007955 21007960 21005100 21004300 – 21003700 21003710A 140 21002100 21007955 21007950 21004850 21004300 – 21003800 21003810A 145 21002110 21007955 21007950 – 21004300 – 21003850 21003860A 150 21002100 21007955 21007950 21004850 21004300 – 21003800 21003810A 155 21002120 21007955 21007950 21005250 21004300 – 21003870 21003880A 160 21002200 21007955 21007950 21005300 21004300 – 21003900 21003910A 165 21002200 21007955 21007950 21005300 21004300 – 21003900 21003910A 168 21002400 21007955 21007950 21005400 21004300 – 21004100 21004110A 169 21002410 21007955 21007960 21005500 21004300 – 21004150 21004160A 170 21002400 21007955 21007950 21005400 21004300 – 21004100 21004110A 175 21002420 21007955 21007950 21005400 21004300 – 21004100 21004110A 180 21002420 21007955 21007950 21005400 21004300 – 21004100 21004110A 185 21002420 21007955 21007950 21005400 21004300 – 21004100 21004110A 190 21002420 21007955 21007950 21005400 21004300 – 21004100 21004110A 195 21002500 21007975 21007970 21005600 21004300 21004210 21004200 21004205A 196 21002510 21007955 21007960 21005650 21004300 – 21004150 21004160A 197 21002510 21007955 21007960 21005650 21004300 – 21004150 21004160A 198 21002520 – 21008010 – 21004300 – 21004170 21004180
Euromas-Aluminium accessories
435All dimensions in mm. Please refer to technical data.
Phoenix WeidmüllerMBK 2.5 MBK 3 MBK 5 UK 3 N UK 5 N UK 10 N AKZ 1.5 AKZ 2.5 AKZ 4 SAK 2.5 SAK 4
DIN-rail TS 15 X X X X X XDIN-rail TS 32 X X X X XDIN-rail TS 35 X X XBridgeable X X X X X X X X X XEnd angle-piece 2 2 2 2 2 2 2 2 2 2 2Closing plates – 1 1 1 1 1 1 1 1 1 1Connection cross-section(mm2) fine-strand 1.5 2.5 4 2.5 4 10 1.5 2.5 4 2.5 4Connection cross-section(mm2) single wire 2.5 4 4 4 6 16 2.5 4 6 4 10Nominal voltage (V) 500 500 500 750 750 800 400 250 500 800 800Rating (A) 26 32 34 34 34 76 17.5 24 32 24 32Terminal width (mm) 5.2 5.2 6.2 5.2 6.2 10.2 5 5 6 6 6.5
Model Number per DIN-rail Number per DIN-railA 100 1 x MK3/4 terminal blockA 101 4 1 x BK4 terminal blockA 102 11 1 x BK6 terminal blockA 103 20 1 x BK12 terminal blockA 104 14 1 x BK12 terminal blockA 105 6 6 6 6 6 4A 106 24 24 1 x BK12 terminal blockA 110 16 16 12 15 15 12A 114 30 30 25 30 30 25A 115 26 26 22 25 25 20A 116 11 11 9 10 10 8A 117 40 40 34 40 40 33A 118 22 22 18 22 22 18A 119 12 10 6 10 9A 120 12 10 6 10 9A 121 15 13 8 13 12A 122 31 26 15 26 24A 123 31 26 15 26 24A 124 58 48 29 50 46A 125 19 16 9 16 15A 126 27 22 13 23 21A 127 23 19 11 20 18A 130 38 32 19 33 30A 131 42 35 21 36 33A 135 57 48 29 50 46A 138 96 80 49 83 77A 140 27 22 13 23 21A 145 32 27 16 28 26A 150 27 22 13 23 21A 155 42 35 21 36 34A 160 52 43 26 45 41A 165 52 43 26 45 41A 168 65 55 33 56 52A 169 103 87 53 90 83A 170 65 55 33 56 52A 175 65 55 33 56 52A 180 65 55 33 56 52A 185 65 55 33 56 52A 190 65 55 33 56 52A 195 69 58 35 60 55A 196 103 87 53 90 83A 197 103 87 53 90 83A 198 103 87 53 90 83
Maximum assignment with terminal blocks
436
Note:For the A 110 F05 Ex, a component check wascarried out according to guideline 94/9/EG.
EC type examination certificate PTB 04 ATEX 1116 U.Explosion protection: - EX II 2G EExe II
- EX II 2D IP66Ex-cable glands see page 618.
Order designationEnclosures Order no. DesignationA 110 F05 01110800 Euromas aluminium enclosure with F05 insertion
openingA 110 F05 Ex 01110600 Euromas aluminium enclosure with F05 insertion
opening acc. to ATEX
Order designationEnclosures Order no. DesignationV 215 F05-PST 02215612 Euromas Vestamid enclosure with F05 insertion
opening, with PST cut-outV 215 F05-FG-PST 02215622 Euromas Vestamid enclosure with F05 insertion
opening, with PST cut-out and windowV 215 F05-ZR 02215613 Euromas Vestamid enclosure with F05 insertion
opening, with centring ringV 215 F05-FG-ZR 02215623 Euromas Vestamid enclosure with F05 insertion
opening, window and centring ring
Euromas with F05 insertion opening
External dimensions: L 120 x W 80 x H 55 mmColour: Black, similar to RAL 9005 Ingress protection: IP 65Surface resistance: < 109 Ω to EN 50014Scope of delivery: Base, lid
Please order Pg 13 plug-in cable for PST cut-outseparately (order no. 12060407).Design with clear lid (PC) and in enclosure material PC light grey, similar to RAL 7035, available on request.
Euromas with F05 insertion opening
V 215 F05-FG-ZR
A 110 F05
Euromas – F05 insertion opening
External dimensions: L 125 x W 80 x H 55 mmColour: Silver-grey, similar to
RAL 7001Ingress protection: IP 66Scope of delivery: Base, lid,
for Ex-design additionalEx-type plate,earthing connection M4 internal and external
Z-2402596
Z-2502608
437
V 215 F05-PST / V 215 F05-FG-PST /V 215 F05-ZR / V 215 F05-FG-ZR
A 110 F05 / A 110 F05
All dimensions in mm. Please refer to technical data.
Note for A 110 F05:1. Cable and wire inlets and blank-
ing plugs acc. to DIN 46320 and 46255 with separate test certifi-cate and separately tested elasto-mer seal.
2. Operating temperatures for theadjusting axis sealing rings:- round sealing ring 9.0 x 1.5 -
NBR 70: -30°C ... +100°C- round sealing ring 9.0 x 1.5 -
VMQ 70 (silicone): -55°C ... +155°CItems 50 and 60 do not apply to A 110 F05.
Important:As the installation of the adjustingaxis including the adjusting axis sealonly takes place during completeassembly of the enclosure, the manufacturer of the complete unit is responsible for ensuring compli-ance with ingress protection IP 65 acc. to DIN EN 60529 for this sealedpoint! The enclosure manufacturercannot accept any guarantee inrespect of this.
Important:As the installation of the adjustingaxis including the adjusting axis sealonly takes place during completeassembly of the enclosure, the manufacturer of the complete unit is responsible for ensuring compli-ance with ingress protection IP 65 acc. to DIN EN 60529 for this sealedpoint! The enclosure manufacturercannot accept any guarantee inrespect of this.
Ex
Ex
1540
125
113
80 68
10
20
40
30
50
60
0123
ROSE SystemtechnikD-Porta Westfalica
II 2 D IP66
II 2 G EExe II
Typ: 46.081206 (A110 F05)
PTB 04 ATEX 1116 U
1.8+
0.1
-0
Ø 9.3+0.1 -0
Ø 12 h9
min
3
ma
x 10
X
X 2:1
Type plate gluedinside the lid
Adjusting axis incl. accessoriesnot included in scope of delivery.
Adjusting axis sealing ring,see note 2.
80
120
X
X 2:1
ma
x 10
min
3
Ø12 h9Ø 9.3+0.1 0
1.8+
0.1
0
108
40
Ø 3
4.8
Ø 50
15
2.5
Ø 35.4
50
M6
7
Ø 13
18
Option: with/without injection-moulded clear window.
Thickened material (0.2 mm - 0.8 mm)only with design with window.
Adjusting axis incl. accessoriesnot included in scope of delivery.
Option: with/withoutinjection-mouldedPST insertion opening.Shrinkage may occur withV 215 as a result of processing.
Unlisted dimensions see EuromasM 215.
Shrinkage may result in theVestamid enclosures (V 215)being approx. 1% smaller.
Optional: with/without centring ring
