zaha hadid-Bmw Central Building

4
ZAHA HADID ARCHITECTS FOR FURTHER INFORMATION: [email protected] BMW CENTRAL BUILDING PRESS RELEASE

Transcript of zaha hadid-Bmw Central Building

Page 1: zaha hadid-Bmw Central Building

ZAHA HADID ARCHITECTSFOR FURTHER INFORMATION: [email protected]

BMW CENTRAL

BUILDING

PRESS RELEASE

Page 2: zaha hadid-Bmw Central Building

© Helene Binet

BMW CENTRAL BUILDING [LEIPZIG, GERMANY]2002-2004 [under construction]

PROGRAM: Offices and technical spaces for car manufacturing plant

CLIENT: BMW AGTriebstraße 1480993 MünchenGermany

ARCHITECT: Design Zaha Hadid with Patrik Schumacher

Project Architect Jim Heverin/Lars Teichmann [Zaha Hadid]

CONSULTANTS: Landscape Acrhitects: Gross. Max [Edinburgh, UK]

Structural Engineering IFB Dr. Braschel AG [Stuttgart, Germany]Anthony Hunt Associates [London, UK]

Costing IFB Dr. Braschel AG [Stuttgart, Germany]

Lighting Design Equation Lighting [London, UK]

SIZE/AREA : Building 25,000 m2

Page 3: zaha hadid-Bmw Central Building

The Central Building is the active nerve- centre or brain of the whole factory complex. All threads of the building's activities gath-er together and branch out again from here.This planning strategy applies to the cycles and trajectories of people - workers(arriving in the morning and returning for lunch) and visitors - as well as for the cycle and progress of the production line whichtraverses this central point - departing and returning again. This dynamic focal point of the enterprise is made visually evidentin the proposed dynamic spatial system that encompasses the whole northern front of the factory and articulates the centralbuilding as the point of confluence and culmination of the various converging flows. It seems as if the whole expanse of thisside of the factory is oriented and animated by a force field emanating from the central building. All movement converging onthe site is funnelled through this compression chamber squeezed inbetween the three main segments of production: Body inWhite, Paint Shop and Assembly.The organisation of the building exploits the obvious sequence of front to back for the phasing of public/busy to more with-drawn/quiet activities. The façade envelope is pulled in under a large diagonally projecting top floor. Here the car drop offswoops underneath letting off visitors into the glazed public lobby. The generous lobby allows views deep into the building.The depth of the building is opened by means of the insertion of courtyards that admit daylight and visibility to the building'sheart. This is exemplified by the Canteen location adjacent to such a courtyard, offering a point of communication within theinner zone. The primary organising strategy is the scissor-section that connects groundfloor and first floor into a continuous field. Twosequences of terraced plates - like giant staircases - step up from north to south and from south to north. One commencesclose to the public lobby passing by/overlooking the forum to reach the first floor in the middle of the building. The other cas-cade starts with the cafeteria at the south end moving up to meet the first cascade then moving all the way up to the space pro-jecting over the entrance. The two cascading sequences capture a long connective void between them. At the bottom of thisvoid is the auditing area as a central focus of everybody's attention. Above the void the half-finished cars are moving along theirtracks between the various surrounding production units open to view.The cascading floor plates are large enough to allow for flexible occupation patterns. The advantage lies in the articulation ofrecognisable domains within an overall field. Also the global field is opened up to visual communication much more than wouldbe possible on a single flat floorplate. A huge flat playing field for various configurations of the administrative and engineeringis offered above the forum. This field is again overlooked by the top end of the south-north cascade.The close integration of all workers is facilitated by the overall transparency of the internal organisation. The mixing of functionsavoids the traditional segregation into status groups that is no longer conducive for a modern workplace. A whole series of engi-neering and administrative functions is located within the trajectory of the manual workforce coming in to work or moving in andout of their lunch break. White collar functions are located both on ground and first floor. Equally some of the Blue Collar spaces(lockers and social spaces) are located on the first floor. Especially those internal reserve spaces that are waiting for full use inPhase 2 are allocated as social communication spaces to mix blue and white collar workers. This way the establishment ofexclusive domain is prevented.ACar Park as Landscape feature: The potential problem of placing a large car- park in front of the building had to be turned intoan integral architectural feature that carries the scheme by turning it into a dynamic spectacle in its own right. The inherentdynamism of vehicle movement and the 'lively' field of the car bodies is revealed by giving the arrangement of parking lots atwist that lets the whole field move, colour and sparkle. The swooping trajectories across the field culminate within the building.

BMW CENTRAL BUILDING [LEIPZIG, GERMANY]

Page 4: zaha hadid-Bmw Central Building

ZAHA HADID ARCHITECTSStudio 9, 10 Bowling green lane EC1ROBQ London

[email protected]

© Steve Double

PP_S-DOUBLE_01

BMW CENTRAL BUILDING [LEIPZIG, GERMANY]2002-2004 [under construction]

PLEASE CREDIT PHOTOGRAPHER AS MENTIONED

© S

teve

Dou

ble

PP_S

-DO

UB

LE_0

2

PP_RENDERING_02

© Zaha Hadid Office

PP_RENDERING_03

© Zaha Hadid Office

PP_RENDERING_01

© Zaha Hadid Office