YOUR “BEST VALUE” CLAMPING SOLUTION FOR PANELS, STAIR ...
2
YOUR “BEST VALUE” CLAMPING SOLUTION FOR PANELS, STAIR COMPONENTS, RAILS AND POSTS HEAVY DUTY FRAME, HEAVY DUTY CLAMPS HYDRAULIC POWER UNIT FOR TIGHTENING AND ROTATION PNEUMATIC PANEL FLATTENER AND FRONT REST PERFECT CONTROL OVER TIGHTENING PRESSURE REGARDLESS OF PANEL THICKNESS LIGHT COMPRESSED AIR CONSUMPTION ONLY 3 CFM 6 TO 20 SECTION MODELS, 8 1 / 2 TO 16 1 / 2 FOOT CAPACITY TOP QUALITY GLUINGS, LESS REJECTS MORE PROFITS SRX ADVANTAGES
Transcript of YOUR “BEST VALUE” CLAMPING SOLUTION FOR PANELS, STAIR ...
YOUR “BEST VALUE” CLAMPING SOLUTION
FOR PANELS, STAIR COMPONENTS, RAILS AND POSTS
HEAVY DUTY FRAME, HEAVY DUTY CLAMPSHYDRAULIC POWER UNIT FOR TIGHTENING AND ROTATIONPNEUMATIC PANEL FLATTENER AND FRONT REST PERFECT CONTROL OVER TIGHTENING PRESSURE REGARDLESS OF PANEL THICKNESSLIGHT COMPRESSED AIR CONSUMPTION ONLY 3 CFM6 TO 20 SECTION MODELS, 81⁄2 TO 161⁄2 FOOT CAPACITYTOP QUALITY GLUINGS, LESS REJECTS MORE PROFITS
SRX ADVANTAGES
SRX ang 25/10/07 12:14 Page 1
PR
INTE
D I
N C
AN
AD
A •
20
07
/10
340, 6th Street, Daveluyville, Quebec, Canada G0Z 1C0Phone: (819) 367-2633 • Fax: (819) 367-2100
Toll Free: 1-866-6RETURN (673-8876)Email: [email protected] • www.doucetinc.com
D I S T R I B U T E D B Y :
SPECIFICATIONS
Heavy duty Carrier: foot capacity
Pneumatically actuated front rest and section support
4" Clamp extenders for posts or blocks, for use with 2
Downward force of the panel flattener up to 750 lbs1/2" Clamps only
6, 8, 16 and 20 sections on all Carriers; 12 sections onPanel assembly:
5 HP power unit with immersed 6.7 GPM pump for single operator Carriers
10 HP power unit with immersed 13.4 GPM pump for dual operator Carriers
Heavy duty Clamps
If needed, Clamp Carrier can be equipped with two tightening carriages
2 1/2 " or 3 1/2" by 32", 36", 40" or 44" opening, rapid change model
315 RPM hydraulic t ightening tool with joystick control, and built-in torque control valvemounted on a sliding carriage moving across the front rest of the Clamp Carrier
Hydraulic rotation motor and speed reducer with joystick forward/reverse controlOne valve for t ightening torque calibration relative to material thickness andcenter to center spacing on clamps (as per pressure charts)
Panel flattener installed on a sliding carriage with flattering and release commandedby a manual rocking valve
8 1/2', 10 1/2', 12 1/2' and 16 1/2'
8 1/2 1/2' Carriers only' and 10
SRX Clamp Carriers include an hydraulic power unit for quick rotation andperfectly calibrated tightening, a pneumatically activated panel flattenerand a pneumatically actuated front rest. SRX Clamp Carriers feature HeavyDuty Doucet Clamps, the heaviest and sturdiest in the industry.
Don't settle for less.SRX ROTATION MOTOR
SRX POWER UNIT
CLAMP TIGHTENER ANDPANEL FLATTENER
6 SECTION MODEL, 16 1⁄2’ CAPACITY
SRX ang 25/10/07 12:14 Page 2
