Y Parametric MagHex tiles for Gloomhaven · 2019. 12. 12. · 62.2 KB updated 12. 12. 2019 hexagon...
Transcript of Y Parametric MagHex tiles for Gloomhaven · 2019. 12. 12. · 62.2 KB updated 12. 12. 2019 hexagon...
Summary
This is a parametrically redesigned version of the original maghex tilesystem for gloomhaven. The main feature is improved snapping action forthe magnets.
The tiles that fit into these bases can be found here: https://www.thingiverse.com/thing:3530085
Please note that my 3mm magnets are quite tight in the 3mm version, soI've also uploaded a slightly larger 3.2mm version. Make sure you testwhich size fits your magnets best.
The version in the movie is 3.0mm magnets in the 3.0mm version... Youcan see how much pressure they need to go in! (Those aren't coming outany time soon ;) )
https://youtu.be/qnaAU5BTTNw
The reason I redesigned this is that the magnets would just drop out of theoriginal even though the magnets I had seems to be pretty close to theneeded 3x3mm.
Changelog:v9: initial uploadv12: removed chanfer on bottom to improve bed adhesion while printing
Toys & Games > Board games
F Feday
Parametric MagHextiles forGloomhaven
VIEW IN BROWSER
updated 12. 12. 2019 | published 12. 12. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
21.0 KBupdated 12. 12. 2019
42.0 KBupdated 12. 12. 2019
87.6 KBupdated 12. 12. 2019
96.1 KBupdated 12. 12. 2019
18.6 KBupdated 12. 12. 2019
62.2 KBupdated 12. 12. 2019
hexagon gloomhavenelement gloomhaven dungeontiles
Category: Toy & Game Accessories PrintSettings
Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 5% Filament: Any Any AnyNotes:
Recommended to print with a 0.4mm nozzle
30mm_v12_third_13852.stl
30mm_v12_half_13852.stl
32mm_v12__full_13852.stl
30mm_v12_full_13852.stl
32mm_v12_third_13852.stl
30mm_v12_no_center_13852.stl
54.0 KBupdated 12. 12. 2019
37.9 KBupdated 12. 12. 2019
96.1 KBupdated 12. 12. 2019
42.0 KBupdated 12. 12. 2019
54.0 KBupdated 12. 12. 2019
1.1 MBupdated 12. 12. 2019
444.2 KBupdated 12. 12. 2019
87.6 KBupdated 12. 12. 2019
428.1 KBupdated 12. 12. 2019
32mm_v12_no_center_13852.stl
32mm_v12_half_13852.stl
30mm_v12_full.stl
30mm_v12_half.stl
32mm_v12_no_center.stl
maghex_magsnap_v9.f3d
maghex_magsnap_v9.step
32mm_v12__full.stl
maghex_magsnap_v13.step
1.1 MBupdated 12. 12. 2019
62.2 KBupdated 12. 12. 2019
37.9 KBupdated 12. 12. 2019
18.6 KBupdated 12. 12. 2019
21.0 KBupdated 12. 12. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
maghex_magsnap_v13.f3d
30mm_v12_no_center.stl
32mm_v12_half.stl
32mm_v12_third.stl
30mm_v12_third.stl
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition