Y Belt Buckles - PrusaPrinters · 2019. 10. 25. · Summary I designed two belt buckles. They use...
Transcript of Y Belt Buckles - PrusaPrinters · 2019. 10. 25. · Summary I designed two belt buckles. They use...
Summary
I designed two belt buckles. They use the same mechanism but they lookdifferent, so you can choose the one you like most. One is for 23mm widestrap and the other 28mm. You can scale them a bit at the x-axis if yourstrap has different dimensions. If you need a significantly different sizedon't hesitated to ask.
Instructions: For axle just use filament (1.75). Also place a small elasticpiece in the small recess. You can use a piece PE protective foam that youcan find in many packages.
Stamos
Belt Buckles
VIEW IN BROWSER
updated 25. 10. 2019 | published 25. 10. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
147.4 KBupdated 23. 10. 2019
https://youtu.be/nKleEu4KXMY
Fashion > Other Fashion Accessories
buckle belt
buckle-v2-wedge.stl
210.3 KBupdated 23. 10. 2019
118.6 KBupdated 23. 10. 2019
171.9 KBupdated 23. 10. 2019
129.2 KBupdated 23. 10. 2019
223.9 KBupdated 23. 10. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed
buckle-v1-main.stl
buckle-v2-top.stl
buckle-v2-main.stl
buckle-v1-top.stl
buckle-v1-wedge.stl
✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition