Xylem Water Solutions AB (the Company) was previously ... · PDF fileXylem Water Solutions AB...

Xylem Water Solutions AB (the Company) was previously named ITT Water & Wastewater AB. The name change took place in November 2011. This is document is (i) a document that relates to a product of the Company phased out prior to the name change; or (ii) an old version of documentation relating to a product that is stil l being produced by the Company but which document was published prior to the 1st of January 2012 . This document may therefore stil l be marked "ITT". Xylem Water Solutions AB is no longer an ITT company and the fact that "ITT" may appear on this document shall not be interpreted as a reference by the Company to "ITT" in the Company's current business activities. Any use or reference to “ITT” by you is strictly prohibited. In no event will we be liable for any incidental, indirect, consequential, punitive or special damages of any kind, or any other damages whatsoever, including, without limitation, those resulting from loss of profit, loss of contracts, loss of reputation, goodwill, data, information, income, anticipated savings or business relationships for any use by you of “ITT”. This disclaimer notice shall be interpreted and governed by Swedish law, and any disputes in relation to it are subject to the jurisdiction of the courts in Sweden. If you do not agree to these terms and conditions you should not print this document and immediately stop accessing it.

End of Disclaimer text.

Parts ListFlygt Mixer 4620

Parts List

Flygt Mixer 4620

Overview

This publication contains parts information for the Mixer; standard version (410) andExplosion proof–version (490).

Please contact ITT Flygt documentation department and let us know if any informationin this publication is

• incorrect

• missing

• difficult to find or

• irrelevant.

Table of Contents This publication contains the following topics:

Topic

Preface ...................................................................................................................................................... 4Practical information ................................................................................................................................... 5

Data plate interpretation ......................................................................................................................... 6Product denomination ............................................................................................................................ 9Order parts ............................................................................................................................................11

Motor Parts ................................................................................................................................................12Exploded view: Motor Parts ....................................................................................................................13List of Motor Parts..................................................................................................................................14

Hydraulic Parts ...........................................................................................................................................17List of Hydraulic Parts ............................................................................................................................18

Parts for Service .........................................................................................................................................19List of parts for Service...........................................................................................................................20

Accessories................................................................................................................................................21Exploded view: Installation Accessories for Mixer ....................................................................................22View of Leakage Sensor (FLS) ...............................................................................................................23List of Accessories .................................................................................................................................24

Parts List, Flygt Mixer 4620 3

Preface

Purpose The purpose of this document is to give the reader information about parts and accessoriesfor the product.

Recipient The document is intended for ITT

• customers

• service personnel

• sales personnel

Contact For more information

• contact your ITT representative

• visit http://www.ittwww.com/

Reference More information about the product is available at http://webservices.ittwww.com/tpi/.

4 Parts List, Flygt Mixer 4620

http://www.ittwww.com/

http://webservices.ittwww.com/tpi/

Practical information

Overview

Table ofContents

This chapter contains the following topics:

Topic

Data plate interpretation ..................................................................................... 6Data plate ..................................................................................................... 6Approval plate ............................................................................................... 7

Product denomination......................................................................................... 9Order parts ........................................................................................................ 11


Data plate interpretation

Introduction The ITT product is always provided with data plates:

• The general data plate is used on all products.

• The approval plate is added to all explosion proof products.

Data plate

The product may only be operated within the parameters stated on the data plate.

Illustration This is an illustration of a general data plate.

1211 13

2120

19161514

8

7

6

5

4

2 1

22

2423

1817109

3

Fielddescription

This table shows the fields on the general data plate, and which information each fieldcontains.

Field Description Field Description

1 Curve code/Propeller code 13 Rated current

2 Serial number 14 Rated speed

3 Product number 15 Maximum submergence

4 Country of origin 16 Direction of rotation:

• L = Left

• R = Right

5 Additional information 17 Duty class

6 Phase; type of current,frequency

18 Duty factor

7 Rated voltage 19 Product weight

8 Thermal protection 20 Locked rotor code letter

9 Thermal class 21 Power factor



10 Rated shaft power 22 Maximal ambient temperature

11 International standard 23 Read Installation Manual

12 Degree of protection 24 Notified body (only forEN-approved Ex-products)

Approval plate

The approval is shown on the approval plate.

FM approvedversion

Illustration This is an illustration of an approval plate for the FM approved product version.

2

1

Fielddescription

This table shows the fields on the approval plate, and which information each field contains.

Field Description

1 Temperature class

2 Maximum ambient temperature

EN approvedversion

Illustration This is an illustration of an approval plate for the EN approved product version.


Fielddescription

This table shows the fields on the approval plate.


A Approval I Input power

B Approval authority + ApprovalNumber

J Rated speed

C Approval for Class 1 K Controller

D Approved drive unit L Additional information

E Stall time M Max. ambient temperature

F Starting current / Rated current N Serial number

G Duty class O ATEX marking

H Duty factor — —


Product denomination

Salesdenomination

The product’s identity is built up of the Sales Code (four digit) and two letters indicatinghydraulic end and type of installation.

This is an example of a sales denomination.

1

NP 3085

2 3

Table: This table explains what the letters and the numbers in the sales code stand for.

Code Position Gives information about the...

1 hydraulic part

2 installation mode

3 sales code

Product code In each range the product´s identity, Product Code, is made up of seven digits.

This is an example of a product code.

3085.183

1 2

NP

Table: This table explains what the product code is made up of:

Code position Gives information about the ...

1 sales denomination

2 version


Serial number The serial number is used for identification of an individual pump/mixer.

This is an example of a serial number.

1

NP 3085.183 - 951 0163

2 3 4

Table: This table explains what the serial number is made up of:

Product code position Gives information about the ...

1 product code

2 production year

3 production cycle

4 running number


Order parts

Order When ordering spare parts, state serial number of the product, spare part number andquantity.

Requirements Genuine ITT parts must always be used for repairs if the product is to fulfill requirementsand obtain official approval.

Qualificationof personnel

Only ITT or ITT-authorized service personnel may undertake repair work on Ex-approvedproducts.

Speciallyapprovedproducts

Spare parts marked with (EX) after the part number are subject to dimensional accuracyinspection.


Motor Parts

Overview

Table ofContents


Topic

Exploded view: Motor Parts ................................................................................ 13List of Motor Parts .............................................................................................. 14


Exploded view: Motor Parts


List of Motor Parts

Qty/Ver-sion

Pos. No Part. No Denomination

410

490

5 83 04 45 Hex.socket hd screw M8X35-A4-80 1 1

6 83 06 67 Hex.socket hd screw M6X20A4-80+DRI-LOC 204

13 14


7 83 04 48 Hex.socket hd screw M8X20-A4-80(GUIDING CL)

4 4

8 83 03 06 Hex.socket hd screw M8X50-A4-70 1

11 82 27 26 Lock nut M6-A4-70 1

12 82 27 27 Lock nut M8-A4-70 7 7

15 82 35 73 Plain washer 6-A4-170 2 2

16 82 35 74 Plain washer A4-170 8

19 640 84 00 Seal ring 10 10

20 646 53 00 Earthing plate 1

24 82 73 85 O-ring 13.3X2.4 NBR 4 4

24 82 79 12 O-ring 13.3X2.4 FPM 4 4

26 82 77 88 O-ring 48X3-1 NBR 1 1

26 82 95 59 O-ring 48X3 FPM 1 1

27 82 74 64 O-ring 54.5X3 NBR 1 1

27 82 75 19 O-ring 54.5X3 FPM 1 1

28 82 74 75 O-ring 109.5X3 NBR 1 1

28 82 81 67 O-ring 109.5X3 FPM 1 1

29 82 74 77 O-ring 119.5X3 NBR 3 3

29 82 81 59 O-ring 119.5X3 FPM 3 3

38 303 44 01 Slotted head screw 3 3

50 83 33 11 Ball bearing 6301-2Z/C3WT12X37X12

1 1

51 83 33 13 Ball bearing 6304-2Z/C3WT20X52X15

1 1

55 607 48 02 Spring 1 1

60 640 66 06 Shaft unit For 13-10-4FB. 1 1

60 640 66 07 Shaft unit For 13-08-4BB. 1 1

61.1 633 09 74 Stator housing unit 1-phase, 50 Hz, 230V. 1

61.1 633 09 77 Stator housing unit 1-phase, 60 Hz, 220 - 230V. 1

61.1 633 09 79 Stator housing unit 1-phase, 60 Hz, 115V. 1

61.1 646 43 70(EX)

Stator housing unit 1-phase, 50 Hz, 230V. 1

61.1 646 43 73(EX)

Stator housing unit 1-phase, 60 Hz, 220 - 230V. 1


Qty/Ver-sion


41

0

49

0

61.1 646 43 75(EX)

Stator housing unit 1-phase, 60 Hz, 115V. 1

61.1 646 43 91(EX)

Stator housing unit 3-phase, 50 Hz, 400V - 415VY/230VD. 3-phase, 60 Hz, 460V Y.

1

61.1 646 43 92(EX)

Stator housing unit 3-phase, 50 Hz, 440V Y. 1

61.1 646 43 93(EX)

Stator housing unit 3-phase, 50 Hz, 500V Y. 3-phase, 60Hz, 575V - 600V Y.

1

61.1 646 43 95(EX)


61.1 646 43 96(EX)

Stator housing unit 3-phase, 60 Hz, 220V - 230VD 1

61.1 646 43 97(EX)

Stator housing unit 3-phase, 60 Hz, 200V - 208V Y. 1

61.1 646 43 98(EX)


61.1 646 43 99 Stator housing unit 3-phase, 50 Hz, 380V Y/220V D.3-phase, 60 Hz, 440V Y.

1

61.1 730 81 11 Stator housing unit 3-phase, 50Hz, 400 - 415VY/230VD.3-phase, 60Hz, 460VY.

1

61.1 730 81 12 Stator housing unit 3-phase, 50Hz, 440VY. 1

61.1 730 81 13 Stator housing unit 3-phase, 50Hz, 500VY. 3-phase,60Hz, 575 - 600VY.

1


61.1 730 81 16 Stator housing unit 3-phase, 60Hz, 220 - 230VD. 1

61.1 730 81 17 Stator housing unit 3-phase, 60Hz, 200 - 208VY. 1


61.1 730 81 19 Stator housing unit 3-phase, 50Hz, 380VY/220VD.3-phase, 60Hz, 440VY.

1

62 708 96 03(EX)

Bearing holder 1

62 708 96 04 Bearing housing FLS 1

62 708 96 06 Bearing housing 1

63 640 82 00 Oil housing 1 1

64 626 77 01(EX)

Bearing cover Ex-version 1

64 626 77 02 Bearing cover Standard version 1

80 641 24 31 Mechanical seal RSiC 1 1

80 641 24 33 Mechanical seal WCCR 1 1

100 83 43 45 Cable lug 1-2.5MM2;M6 2 2

101 83 44 24 Closed end splice 3-6(AWG 12-10)L=18

7 7

111 84 15 86 Seal sleeve (10)-12MM HCR 1


Qty/Ver-sion


41

0

49

0

111 84 17 92 Seal sleeve (14)-16MM SUBCAB 1 1

111 84 17 94 Seal sleeve (18)-20MM AWG 1 1

112 678 58 12(EX)

Cable clip (10)-12MM 1

112 678 58 16(EX)

Cable clip (14)-16MM 1 1

112 678 58 20(EX)

Cable clip (18)-20MM 1 1

114 82 42 42 Plain washer 24.5X35X2-A4-70 1 1

121 640 89 01(EX)

Entrance flange 1 1

121 673 30 00(EX)

Entrance flange ISO G1 Intended for power cable with metalhose

1 1

123 640 87 00 Connection housing Standard version 1

123 640 87 01(EX)

Connection housing Ex-version 1

124 640 88 00 Entrance cover 1 1

128 550 22 00 Connection plate (FLS) 1 1

128 630 68 00 Data plate USE 6306801 AS SPAREPART

2 2

128 630 69 00 Certificate plate EX 2

128 630 70 00 Certificate plate FM APPROVED 2

128 630 76 00 Plate HOT WATER PRODUCT 1

128 652 28 00 Connection plate 1-phase 1 1

128 655 01 00 Connection plate 1/3-phase 1 1



130 94 19 79 Motor cable SIH-J 7G2,5 MM2 max 90°C(194°F), (10)- 12mm *

130 94 20 61 Motor cable SUBCAB4G1,5+2X1.5MM2

Ø15-16 * *

130 94 21 02 Motor cable SUBCAB 14AWG/7 Ø18-20 * *

131 640 97 01 Lifting handle compl 1 1

219 94 11 05 Tape 1 1


400 667 40 00 Sticker 2 2

912 82 73 85 O-ring 13.3X2.4 NBR Extra O-rings for inspection. 3 3

912 82 79 12 O-ring 13.3X2.4 FPM Extra O-rings for inspection. 3 3


Hydraulic Parts

Overview

Table ofContents


Topic

List of Hydraulic Parts......................................................................................... 18


List of Hydraulic Parts

Qty/Ver-sion


410

490

8 83 03 06 Hex.socket hd screw M8X50-A4-70 1

16 82 35 74 Plain washer A4-170 8

90 701 26 07 Propeller compl. 7 DEG 3-phase, 50/60 Hz, angle 7°, Stainlesssteel (ASTM 316L)

1 1

90 701 26 13 Propeller compl. 13 DEG 3-phase, 50/60 Hz, angle13°,Stainless steel (ASTM 316L)

1 1

90 701 26 15 Propeller compl. 15 DEG 3-phase, 50/60 Hz, angle 15°,Stainless steel (ASTM 316L)

1 1

90 701 26 18 Propeller compl. 18 DEG 3-phase, 50 Hz, angle 18°, Stainlesssteel (ASTM 316L)

1 1

94 701 28 00 Protective plug 1 1

216 82 93 10 Strap 1 1

232 701 29 00 Protective ring 1 1


Parts for Service

Overview

Table ofContents


Topic

List of parts for Service ....................................................................................... 20


List of parts for Service

Qty/Ver-sion


410

490

800 80 32 97 O-ring kits NBR NBR 1 1

800 80 32 98 O-ring kits FPM FPM 1 1

801 466 26 29 Zinc anode set With guide claw. 1 1

801 466 26 30 Zinc anode set With jet ring. 1 1

808 701 27 07 Propeller unit 3-phase, 50/60 Hz, angle 7°, Stainlesssteel (ASTM 316L)

1 1

808 701 27 13 Propeller unit 3-phase, 50/60 Hz, angle13°,Stainless steel (ASTM 316L)

1 1

808 701 27 15 Propeller unit 3-phase, 50/60 Hz, angle 15°,Stainless steel (ASTM 316L)

1 1

808 701 27 18 Propeller unit 3-phase, 50 Hz, angle 18°, Stainlesssteel (ASTM 316L)

1 1

900 634 01 09 Basic repair kit NBR, Al2O3/WCCR-WCCR/WCCR 1 1

900 634 01 10 Basic repair kit FPM, Al2O3/WCCR-WCCR/WCCR 1 1

900 634 01 11 Basic repair kit FPM, Al2O3/WCCR-RSiC/RSiC 1 1

901 90 17 52 Oil MARCOL 152 * *

914 671 33 00 Spare part kit Guiding claw unit 1

914 671 33 01 Spare part kit Jet ring, compl. 1

914 671 33 02 Spare part kit Jet ring and guiding claw 1

914 671 33 03 Spare part kit Jet ring vortex 1

914 671 33 04 Spare part kit Jet ring with vortex and guiding claw 1

914 671 33 05 Spare part kit Guiding claw unit 1

914 671 33 06 Spare part kit Jet ring 1

914 671 33 07 Spare part kit Jet ring and guiding claw 1

914 671 33 08 Spare part kit Jet ring with vortex 1

914 671 33 09 Spare part kit Jet ring with vortex and guiding claw 1


Accessories

Overview

Table ofContents


Topic

Exploded view: Installation Accessories for Mixer................................................. 22View of Leakage Sensor (FLS)............................................................................ 23List of Accessories ............................................................................................. 24


Exploded view: Installation Accessories for Mixer

4610/4620

40712AC


View of Leakage Sensor (FLS)

4610/4620

40814B


List of Accessories

Qty/Ver-sion


410

490

125 83 45 40 Cable holder FOR CABLE 10-16MM 10- 16 mm (0,39"- 0,63") 1 1

125 83 45 41 Cable holder FOR CABLE 17-25MM 17- 25 mm (0,67"- 0,98") 1 1

126 482 01 01 Cable supp.grip unit 1 1

135 666 25 00 Protective sheet 1 1

137 518 89 02 Leakage detect.unit (FLS) 1 1

146 82 50 15 Lock washer NORD-LOCK M8-2343 4 4

147 630 82 00 Sleeve 4 4

207 671 39 00 Sliding bracket comp 1 1

208 671 42 00 Jet ring compl. 1 1

209 671 34 00 Clamp 2 2

210 671 43 00 Jet ring compl. 1 1

211 82 33 43 Shackle 1 1

212 671 37 00 Lifting handle halfl 1 1

213 671 41 00 Sleeve 1

815 554 20 02 Starter 356-600-A-PG-4 Without thermal contact supervision,with cable connection. 50/60 Hz,3-phase <600 V, 2,5- 4A. 356- A

1 1

815 554 20 04 Starter 356-600-A-PG-10 356- A without thermal contactsupervision, with cable connection.50/60 Hz, 3-phase <600 V, 6- 10A.

1 1

815 554 21 02 Starter 2.5-4A CABLE 9-18MM 356- B without thermal contactsupervision, with cable connection.50/60 Hz, 3-phase <600 V, 2,5- 4A.

1 1

815 554 21 04 Starter 6-10A CABLE 9-18MM 356- B without thermal contactsupervision, with cable connection.50/60 Hz, 3-phase <600 V, 4- 10A.

1 1

815 554 22 14 Starter 4620;0.75KW,230V/50HZ 156-B1 with cable connection, voltagesensing type. 50Hz, 1-phase, 230V,4,9A.

1 1

815 554 22 15 Starter 4620;0.9KW, 230V/60HZ 156-B1 with cable connection, voltagesensing type. 60Hz, 1-phase, 230V,5,7A.

1 1

815 554 23 34 Starter 4620;0.75KW,115V/50HZ 156-B2 with cable connection, currentsensing type. 50Hz, 1-phase, 115V,9,8A

1 1

815 554 23 35 Starter 4620;0.75KW,200V/50HZ 156-B2 with cable connection, currentsensing type. 50Hz, 1-phase, 200V,5,7A

1 1

815 554 23 36 Starter 4620;0.9KW, 115V/60HZ 156-B2 with cable connection, currentsensing type. 60Hz, 1-phase, 115V,11A

1 1


Qty/Ver-sion


41

0

49

0

815 554 23 37 Starter 4620;0.9KW, 200V/60HZ 156-B2 with cable connection, currentsensing type. 60Hz, 1-phase, 200V,6,7A

1 1

815 554 30 02 Starter 351-400-B-516-4 START 351-400-B-516-4 1 1

815 554 30 03 Starter 351-400-B-516-6,3 START 351-400-B-516-6,3 1 1

815 554 30 42 Starter 351-400-B-PG-4 START 351-400-B-PG-4 1 1

815 554 30 43 Starter 351-400-B-PG-6,3 START 351-400-B-PG-6,3 1 1

815 554 30 52 Starter 351-500-B-PG-4 START 351-500-B-PG-4 1 1

815 554 30 72 Starter 351-500-B-432-4 START 351-500-B-432-4 1 1


What can ITT Water & Wastewater do for you?

Integrated solutions for fluid handling are offered by ITT Water & Wastewater as a world leader in trans-

port and treatment of wastewater. We provide a complete range of water, wastewater and drainage

pumps, equipment for monitoring and control, units for primary and secondary biological treatment,

products for filtration and disinfection, and related services. ITT Water & Wastewater, headquartered in

Sweden, operates in some 140 countries across the world, with own plants in Europe, China and North

and South America. The company is wholly owned by the ITT Corporation of White Plains, New York,

supplier of advanced technology products and services.

Visit our Web site for the latest version of this document and more informationwebservices.ittwww.com/tpi

ITT Water & Wastewater ABSE-174 87 SundbybergSweden

Visiting address:Gesällvägen 33SundbybergSweden

Tel. +46–8–475 60 00Fax +46–8–475 69 00

© ITT Water & Wastewater AB. The original instruction is in English.All non-English instructions are translations of the original instruction.

896624_6.0_en.US_2010–12_GPL.4620

Xylem Water Solutions AB (the Company) was previously ... · PDF fileXylem Water Solutions AB...

Documents

Transcript of Xylem Water Solutions AB (the Company) was previously ... · PDF fileXylem Water Solutions AB...