WURTH WOODWORKING ADHESIVES GUIDE

Thermomelt™ performance guide

NOTE: Cross reference is a general guide only and test pieces should be run.To select the BEST adhesive for an application please refer to the Performance Guide. Using an adhesive not shown? Please contact your local Wurth Wood Group Representative for additional help.

Thermomelt™ 100 200 300 400 500MACHINE TYPEmanuallow speed autostandard auto 12-18m/min straight edge

soft-forminghigh speed 12-40m/min straight edge

soft-formingCNC processing centercontour machine straight edge

soft-formingMACHINE TYPEPVCABSpolywood veneersolid woodHPLmelaminefoils

very well suited

well suited

suitable

possible(test piece highly recommended)

Thermomelt™ JOWAT DORUS CANPLAST REHAU

100

28630 HKP21N-B 2022 12200528680 HKP21WH-B 2024 12295128681 HKP25BN-B 2026 —28682 HKP25N-B — —28683 HKP25WH-B — —

200

28010 7501009 2001 12288028030 KS205N 2050 12299028090 KS224-NAT — —— KS224-NAT-2 — —— KS351-CLEAR — —

30028890 7501033 2030 12294128850 7501035 — —— KS217N — —

400 28220 7501058 2020 122981

50028860 KS205WH 2031 12285028861 KS208N 2035 12287028863 KS208WH 2041 —29630 — — —

Thermomelt™ cross reference guide

1 877 GO WURTH www.wurthwoodgroup.com

Thermomelt™ 300 Edgebanding Adhesive Pellets • The industry’s best combination of value and performance • Suitable for a variety of machines• Great bond and good post-melt capabilities• Great for PVC, ABS and fleece backed veneer

Machine types: Works with standard and high speed straight edge bandersBonding: Polyester edges, melamine resin edges, PVC, PP and ABS edges with pre-treated back, resin-impregnated paper and massive and veneer edgesPackaging: 33 lbs. pellets per boxBase: EVA CopolymerSpeed: 20 - 40-m/min, (65 - 132 ft/min) depending on machineWorking Temp: 200 - 210°C (392 - 410°F)Viscosity: 65,000 mPas @ 200°C

• The most poplular of our adhesive line• Superior formulation effective in a wide variety of machines and applications • Great bond and re-melt capabilities• Great for PVC, ABS and fleece backed veneer and suitable for pre-coating of edges — use with HPL if primed

Machine types: Works with manual, standard and high speed auto straight edge banders and CNC processing centersBonding: Polyester edges, melamine resin edges, PVC and ABS edges, uncompressed resin-impregnated paper banding and solid wood, veneer and multi-ply edgesPackaging: 33 lbs. pellets per boxBase: EVA CopolymerSpeed: 20 - 50-m/min, (65 - 165 ft/min) depending on machineWorking Temp: 200 - 210°C (392 - 410°F)Viscosity: 80,000 mPas @ 200°C

Thermomelt™ 500 Edgebanding Adhesive Pellets

Thermomelt™ 300 is available in the following colors:

white natural brown mahogany black

color item no.white 089047741 natural 089047742 brown 089047743 mahogany 089047744 black 089047745

color item no.white 089047791 natural 089047792 brown 089047793 black 089047794

Thermomelt™ 500 is available in the following colors:

white natural brown black

Thermomelt™ 400 is available in the following colors:

Thermomelt™ 400 Edgebanding Adhesive Pellets • Specifically formulated for use with contour and manual edgebanders• Combines low melting temperature with perfect viscosity and aggressive hold• Great bond and good post-melt capabilities• Ideal for PVC, ABS and fleece backed veneer

Machine types: Works with manual and standard auto straight edge banders — contour, straight edge and soft-forming machinesBonding: PVC, Melamine, Veneer and PaperPackaging: 33 lbs. pellets per boxBase: EVA CopolymerSpeed: 5-m/min, (16 ft/min) depending on machineWorking Temp: 130 - 160°C (266 - 320°F)Viscosity: 70,000 mPas @ 150°C color item no.

white 089047881natural 089047882black 089047883

• Highest quality, best performing edgebanding pellet available• Unequalled in strength and durability• No priming necessary for strip laminate• Absolutely no stringing or smearing during routing• Suitable for difficult soft forming profile with tight radius• Transparent with a transparent glue line• Best choice for BAZ and contour banders• High green strength and invisible glue line• Very good re-melting properties and unbreakable bond

Machine types: Works with all machine types and machining centersBonding: Polyester edges, CPL and Melamine Resin edges, PVC and ABS edges and Uncompressed resin-impregnated paper edges on machining centersPackaging: 28 lbs. pellets per boxBase: EVA CopolymerSpeed: 10 - 30-m/min, (32 - 98 ft/min) depending on machineWorking Temp: 180 - 200°C (356 - 392°F)Viscosity: 50,000 mPas @ 200°C

Thermomelt™ 200 Edgebanding Adhesive Pellets

color item no.transparent 089047733

Transparent

1 877 GO WURTH www.wurthwoodgroup.com

white natural black

• Each Thermomelt™ 100 cartridge has a protective film coating permanently attached• Film coating protects cartridges from shop dust and sticking together• Cartridges clean and lubricate your machine with every use, keeping your edgebander in top condition • Superior bonding and tack

Machine types: Specially formulated for Holz-Her edgebanders - flow characteristics will not clog or block the application nozzels on the glue headBonding: HPL edges, Epoxy resin edges, ABS edges, Solid wood edges, Polyester edges, PVC edges and Veneer edgesPackaging: 45 cartridges per box.Base: EVA CopolymerSpeed: 8 - 20-m/min, (26 - 65ft/min) depending on machine.Working Temp: 200 - 220°C (392 - 428°F)Viscosity: 65,000 mPas @ 200°C

Thermomelt™ 100 Edgebanding Adhesive Cartridges

color item no.white 089047821natural 089047822mahogany 089047823 black 089047824transparent 089047825

white natural mahogany black transparent

1 877 GO WURTH www.wurthwoodgroup.com

Thermomelt™ 100 is available in the following colors:

ATLANTA GA5075 North Buford Hwy

Suite 100Norcross, GA 30071

678.924.0386 888.924.0386

FAX 678.924.0391

CHATTANOOGA TN234 Direct Connection Drive

Rossville, GA 30741706.891.2000800.506.9663

FAX 706.891.4229

RALEIGH NC4213 Poole Road

Raleigh, NC 27610919.231.6620800.982.0999

FAX 919.231.9687

BALTIMORE MD6660 Santa Barbara Road

Elkridge, MD 21075410.796.7600800.935.6229

FAX 410.796.7729

GREENSBORO NC1819 Baker Road

High Point, NC 27263336.431.2712800.662.9060

FAX 336.431.2750

RICHMOND VA1701 Rhoadmiller Street

Richmond, VA 23513804.359.1374800.552.4046

FAX 804.353.3206

CHARLESTON SC4325 Lear Avenue

N. Charleston, SC 29418843.529.0808800.466.8499

FAX 843.529.0805

GREENVILLE SC1441 Hwy 101 South

Greer, SC 29652864.877.7328800.868.9669

FAX 864.877.7413

ROANOKE VA701 Gainsboro RoadRoanoke, VA 24016

540.344.2079800.948.7156

FAX 540.344.2306

CHARLOTTE NC4250 Golf Acres DriveCharlotte NC 28208

704.394.9479800.868.0291

FAX 704.398.2162

NORFOLK VA3307 Chesapeake Boulevard

Norfolk, VA 23513757.855.3908800.277.4254

FAX 757.857.6133

TAMPA FL5100 West Hanna Avenue

Tampa, FL 33634800.432.1149888.432.1149

FAX 813.887.1902

1-877-GO-WURTHwww.wurthwoodgroup.com

WAG 3.2012

Build something great