WLAN Validation 1 Motorola Public Document Classification, October 2011 MODULE 18 WLAN VALIDATION.

WLAN Validation1

Motorola Public Document Classification, October 2011

MODULE 18

WLAN VALIDATION

WLAN Validation2


At the end of this module, you will be able to:

WLAN Validation 2

Objectives

– Identify the four phases of WLAN validation– Distinguish between an active site survey and a passive site

survey– Describe site walkabout guidelines– Identify the prerequisites for a performance test– Identify the questions answered during a performance test

WLAN Validation3


Phases of Validation

WLAN Validation4


Phases of Validation - Overview

Site survey validation Performance testing Spectrum analysis (*) Security testing (*)

WLAN Validation5


Site Survey Validation

WLAN Validation6


Summary

Purpose Verify RF Characteristics meet QoS requirements of network design

Prerequisites AP’s are installed and operating

Validation site survey phases Passive LANPlanner / Site Scanner site survey (RF Monitoring)Active LANPlanner / Site Scanner site survey (AP performance)

Considerations A precise validation survey must combine active and passive site surveys

WLAN Validation7


Passive Site Survey Basics

• Survey instrument is a laptop or tablet– with LANPlanner/Site Scanner or an equivalent

survey tool• Survey instrument measures RF energy• Survey instrument generates no WLAN traffic

WLAN Validation8


Passive Site Survey Basics

1. Load site floor plans

2. Mark your starting point

3. Enable RF sensor

4. Walk and mark . . .

5. . . . walk halls, rooms, and open spaces

6. Insert reference points

7. Save survey data

WLAN Validation9


Walkabout Guidelines (1 of 3)

WLAN Validation10



WLAN Validation11



WLAN Validation12


Active Site Survey

• Measures both RF energy . . .• and a continuous data stream . . .• between an AP and the survey instrument

WLAN Validation13


Interpret Survey Results

WLAN Validation14


KEY GUIDELINE

Ensure that the survey tool sampling interval is greater than the AP beacon interval

WLAN Validation15


Performance Testing

WLAN Validation16


Summary

WLAN Validation17


Basics

• Requires both the wired and wired segments of the WLAN

• Requires connectivity to application servers and network resources

• Requires an instance of each client device type and model supported by the network

• Requires an instance of each end-user application supported by the network

WLAN Validation18


Initial Checklist

WLAN Validation19


Application Performance Test Checklist

WLAN Validation20


Roaming Performance Test Guidelines

• During a roaming test, duplicate the maximum roaming speeds users are likely to attain

• Use a packet trace tool during roaming tests, particularly for latency-sensitivereal-time applications

WLAN Validation21


Load Performance Testing

• Determine: Do applications meet QoS requirements when the WLAN is under a typical expected load?

• Recruit end users or an extended test team to simulate site usage scenarios

• Employ a centralized management system to monitor network and application performance

• Interview users to discover the perceived performance of individual applications

WLAN Validation22


WLAN Validation – Review

• Use appropriate tools (LANPlanner , SiteScanner, etc.) to validate RF performance

• Be sure to use “Walkabout Guidelines” to validate quality of RF performance

• Ensure site survey tool sampling interval is greater than the AP beaconing interval

• During roaming test, be sure to duplicate the maximum roaming speeds users are likely to use.

WLAN Validation23

Motorola Public Document Classification, October 2011MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Solutions, Inc. All rights reserved.

You should now be able to:

– Identify the four phases of WLAN validation– Distinguish between an active site survey and a passive site

survey– Describe site walkabout guidelines– Identify the prerequisites for a performance test– Identify the questions answered during a performance test

MODULE SUMMARY

WLAN Validation 1 Motorola Public Document Classification, October 2011 MODULE 18 WLAN VALIDATION.

Documents

Transcript of WLAN Validation 1 Motorola Public Document Classification, October 2011 MODULE 18 WLAN VALIDATION.