Wirquin 90mm Trap
4
SLIM SHOWER TRAP for extra flat 90 mm diameter shower trays `Compact dimensions (only 58 mm under shower tray) `Flow rates up to 33 L/mn (in 15 mm of water). `2 models provide solutions to all connection requirements. `Chrome plated ABS dome and streamlined design. `Available in 2 configurations: water seal trap or waterless membrane. Water seal trap Waterless membrane trap wirquin.com Technicians at your service www.wirquin.com +44 (0) 8444 122029
description
waste trap
Transcript of Wirquin 90mm Trap
SLIM SHOWER TRAPfor extra flat 90 mm diameter shower trays
`Compact dimensions (only 58 mm under shower tray)
`Flow rates up to 33 L/mn (in 15 mm of water).
`2 models provide solutions to all connection requirements.`Chrome plated ABS dome
and streamlined design.`Available in 2
configurations: water seal trap or waterless membrane.
Water seal trap
Waterless membrane trap
wirquin.com
WEB SITE
Technicians at your service
HOTLINE
www.wirquin.com
Technicians at your service
INSTALLATION Taking up very little room under the shower tray, SLIM SHOWER has been specially designed to fit extra flat 90mm showers trays.As such, it will favourably suit
installations requiring low access, for example persons of reduced mobi-lity.Its streamlined chrome plated ABS dome fixes simply to the fixing plate due to a self centring system
TIPSCleaning:���166.'�64#2�8'45+10U�'#5+.;�accessible, removable trough, hair ���'/$4#0'�64#2�8'45+10U�filter with extractable silicon membrane for easy cleaning.
Either version can be changed once the product is installed: swap membrane type to bottle trap or vice versa
Depending on the version used, the bottle trap or silicon membrane can be removed for easy access and connection.
INSTALLATION ON AN EARTHENWARE SHOWER TRAY
OR WITH A CONICAL PERFORATION
OUR SOLUTION U�A SPECIFIC ADAPTER
Description Rererence Gencode Packaging Packing
30120026 5017134129014 Box 01
30120015 5017134129021 Box 01
WATERLESS MEMBRANE TRAP
WATER SEAL TRAP
WATERLESS MEMBRANE TRAP
WATER SEAL TRAP
1
2
3
���� ���U����
09/2012
EARTHENWARE
OR WITH A CONICAL PERFORATION
OOUURR SSOOLLUUTTIIOONN
INSTALLATION ON AN EARTHENWARE
OR WITH A CONICAL PERFORATION
SLIM Shower waste with 43/50mmoutlet 25mm water seal trap
SLIM Shower waste with 43/50mm outlet waterless membrane
+44 (0) 8444 122029
TECHNICAL CHARACTERISTICS
Version
WATER SEAL TRAP WATERLESS MEMBRANE TRAP
Dimensions under tray 58 to 60 mm 58 to 60 mm
Water trap 25 mm waterless sealFlow rate with 15 mm of water 24L/mn 33.6L/mn
Inlet Ø 90 Mushroom Grill Ø 90 Mushroom Grill
Sectional view
Connection:
Technical diagrams:
Ø 40 solvent weld or compression fit/Ø 43 (1 1/2”) solvent weld or push-fit connection
Connection:
Technical diagrams:
Ø 43 (1 1/2”) solvent weld or compression fit /Ø 50 solvent weld or push-fit connection
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2°
Ø 120
Ø 50
Ø 41-431"1/2
Ø 115
228
6012
00
- 25
4018
CHARACTERISTICS OF MATERIALSBOTTLE TRAP VERSIONØ 40 SOLVENT WELD OR COMPRESSION FIT /Ø 43 (1 1/2”) SOLVENT WELD OR PUSH-FIT CONNECTOR
PP: PolypropyleneLDPE: Low Density PolyethylenePA6.6 + GF: Polyamide 6.6 + Glass FibrePOM: PolyacetalEPDM: Ethylene Propylene Diene Monomer
Meets the requirementsof NF EN274.
MEMBRANE TRAP VERSIONØ 40 SOLVENT WELD OR COMPRESSION FIT /Ø 43 (1 1/2”) SOLVENT WELD OR PUSH-FIT CONNECTOR
1
Ref. Quantity Designation Material
1 1 Upper grill ABS
2 1 Bell PP
3 1 Trough PP
4 3 M4x40 mm screw Stainless steel
5 1 Adaptor PA66+GF
6 1 Ø 115 mm gasket SBS 25 Sh A
7 3 Insert for M4 screw Brass
8 1 D90 Waste body ABS
9 1 Ø 40 mm drain pipe ABS
9a 1 Ø 50 mm drain pipe ABS
10 1 Ø 40 mm tapered gasket LDPE
11 1 1”1/2 nut PP
12 Anti-extrusion ring PP
13 1 Filter ring POM
14 1 Membrane SILICON
15 1 Ø 41/43 mm tapered gasket EPDM
16 1 1”3/4 nut PP
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2
3
4
5
6
7
8
91011
1
4
5
6
7
8
1314
12 159a
16
Ø 43 SOLVENT WELD OR COMPRESSION FIT / Ø 50 SOLVENT WELD OR PUSH-FIT CONNECTION
91011
12 159a
16
Ø 43 SOLVENT WELD OR COMPRESSION FIT / Ø 50 SOLVENT WELD OR PUSH-FIT CONNECTION
TECHNICAL CHARACTERISTICS
Version
WATER SEAL TRAP WATERLESS MEMBRANE TRAP
Dimensions under tray 58 to 60 mm 58 to 60 mm
Water trap 25 mm waterless sealFlow rate with 15 mm of water 24L/mn 33.6L/mn
Inlet Ø 90 Mushroom Grill Ø 90 Mushroom Grill
Sectional view
Connection:
Technical diagrams:
Ø 40 solvent weld or compression fit/Ø 43 (1 1/2”) solvent weld or push-fit connection
Connection:
Technical diagrams:
Ø 43 (1 1/2”) solvent weld or compression fit /Ø 50 solvent weld or push-fit connection
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2°
Ø 120
Ø 50
Ø 41-431"1/2
Ø 115
228
6012
00
- 25
4018
CHARACTERISTICS OF MATERIALSBOTTLE TRAP VERSIONØ 40 SOLVENT WELD OR COMPRESSION FIT /Ø 43 (1 1/2”) SOLVENT WELD OR PUSH-FIT CONNECTOR
PP: PolypropyleneLDPE: Low Density PolyethylenePA6.6 + GF: Polyamide 6.6 + Glass FibrePOM: PolyacetalEPDM: Ethylene Propylene Diene Monomer
Meets the requirementsof NF EN274.
MEMBRANE TRAP VERSIONØ 40 SOLVENT WELD OR COMPRESSION FIT /Ø 43 (1 1/2”) SOLVENT WELD OR PUSH-FIT CONNECTOR
1
Ref. Quantity Designation Material
1 1 Upper grill ABS
2 1 Bell PP
3 1 Trough PP
4 3 M4x40 mm screw Stainless steel
5 1 Adaptor PA66+GF
6 1 Ø 115 mm gasket SBS 25 Sh A
7 3 Insert for M4 screw Brass
8 1 D90 Waste body ABS
9 1 Ø 40 mm drain pipe ABS
9a 1 Ø 50 mm drain pipe ABS
10 1 Ø 40 mm tapered gasket LDPE
11 1 1”1/2 nut PP
12 Anti-extrusion ring PP
13 1 Filter ring POM
14 1 Membrane SILICON
15 1 Ø 41/43 mm tapered gasket EPDM
16 1 1”3/4 nut PP
2°
Ø 120
Ø 40
Ø 115
580
- 25
4018
228
120
Ø 431"1/2
2
3
4
5
6
7
8
91011
1
4
5
6
7
8
1314
12 159a
16
Ø 43 SOLVENT WELD OR COMPRESSION FIT / Ø 50 SOLVENT WELD OR PUSH-FIT CONNECTION
91011
12 159a
16
Ø 43 SOLVENT WELD OR COMPRESSION FIT / Ø 50 SOLVENT WELD OR PUSH-FIT CONNECTION
SLIM SHOWER TRAPfor extra flat 90 mm diameter shower trays
`Compact dimensions (only 58 mm under shower tray)
`Flow rates up to 33 L/mn (in 15 mm of water).
`2 models provide solutions to all connection requirements.`Chrome plated ABS dome
and streamlined design.`Available in 2
configurations: water seal trap or waterless membrane.
Water seal trap
Waterless membrane trap
wirquin.com
WEB SITE
Technicians at your service
HOTLINE
www.wirquin.com
Technicians at your service
INSTALLATION Taking up very little room under the shower tray, SLIM SHOWER has been specially designed to fit extra flat 90mm showers trays.As such, it will favourably suit
installations requiring low access, for example persons of reduced mobi-lity.Its streamlined chrome plated ABS dome fixes simply to the fixing plate due to a self centring system
TIPSCleaning:���166.'�64#2�8'45+10U�'#5+.;�accessible, removable trough, hair ���'/$4#0'�64#2�8'45+10U�filter with extractable silicon membrane for easy cleaning.
Either version can be changed once the product is installed: swap membrane type to bottle trap or vice versa
Depending on the version used, the bottle trap or silicon membrane can be removed for easy access and connection.
INSTALLATION ON AN EARTHENWARE SHOWER TRAY
OR WITH A CONICAL PERFORATION
OUR SOLUTION U�A SPECIFIC ADAPTER
Description Rererence Gencode Packaging Packing
30120026 5017134129014 Box 01
30120015 5017134129021 Box 01
WATERLESS MEMBRANE TRAP
WATER SEAL TRAP
WATERLESS MEMBRANE TRAP
WATER SEAL TRAP
1
2
3
���� ���U����
09/2012
EARTHENWARE
OR WITH A CONICAL PERFORATION
OOUURR SSOOLLUUTTIIOONN
INSTALLATION ON AN EARTHENWARE
OR WITH A CONICAL PERFORATION
SLIM Shower waste with 43/50mmoutlet 25mm water seal trap
SLIM Shower waste with 43/50mm outlet waterless membrane
+44 (0) 8444 122029
