Wireless USB Dual Shock Gamepad

8/13/2019 Wireless USB Dual Shock Gamepad

1/12

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857,

09222444303, or log on to www.cdrking.com and care to chat with [email protected] or

[email protected].

2.4GHz Wireless USB Dual Shock Gamepad (GP-USBDS-003-M)

(M Series)

Item Picture Specifications:

Dimension: 100mm x 150mm x 50mm (L x W x H) 14 buttons and 2 analog stick supported Weight: 155g Interface: Wireless USB Requires: 2x AAA batteries Frequency: 2.4Ghz Working range: up to 10 meters

Features:

With Digital and Analog mode With two internal motors that provides maximum

vibration feedback

With Turbo and Auto function With programmable driver Plug and play Supports multi-player game Ergonomic design With analog vibrating support Lightweight and very portable

Package Content:

1 x 2.4GHz Wireless USB Dual Shock Gamepad 1 x Receiver


2/12



[email protected].

ILLUSTRATION

Note: RX LED Indicator indicates when you are connected through wireless receiver


3/12



[email protected].

INSERTING BATTERIES

1Slightly push upward the battery

cover to open, see figure.

2Insert two sizes AAA alkalinebatteries, observing the correct polarity.


4/12



[email protected].

OPERATING INSTRUCTIONS

TECHNICAL USE

Insert the USB Male Connector (wireless receiver) to the USB Female port of your Desktop or Laptop. Wait until your Desktop or Laptop recognizes the device. Then enjoy the game using the 2.4GHz Wireless USB Dual Shock Gamepad.

ANALOG CONTROLLER (DUAL SHOCK)

You can use this analog controller in digital mode or in analog mode. - Analog is available only when using games that supports analog mode, and when operating the

controller in analog mode.

In analog mode, the analog controller also has a vibration function.

3Close the batteries cover completely.


5/12



[email protected].

INSTALLING THE DRIVER

1. Insert the CD-Driver to the CD/DVD Drive: (E :)2. Then a start-up will pop-up3. Click Open Folder to view files

4. Click the BM0523 driver.exe


6/12



[email protected].

5. To continue installation click Next

6. Wait for the Installation process


7/12



[email protected].

7. Click Finishto complete the installation

TESTING THE WIRELESS USB DUAL SHOCK GAMEPAD

1. After installing the vibration function driver, go to the control panel of your computer.


8/12



[email protected].

2. Look for the Hardware and Sound and then click View devices and printers

3. Under Devices and Printers, right click the icon USB Wireless Gamepadand then select Game Controllersettings


9/12



[email protected].

4. Under Game controller settings, click Propertiesto test the Wireless USB Gamepad.For Function Testyou will test the function of every keys and joystick of the USB Gamepad. Try to move or

press every button once every number or axes will calibrate it means the function of the Wireless USB

Gamepad is correctly.

5. To test the calibrations of Wireless USB Gamepad select the Calibration Functiontab then move theJoystick if itsfollowing calibrate correctly.


10/12



[email protected].

6. For Vibration test select the Vibration TestTab for testing the vibration of the USB Gamepad.

Note: You can adjust the strength of the vibration.

MODE SWITCHING AND THE MODE INDICATOR

This Analog Controller (WIRELESS USB DUAL SHOCK GAMEPAD) can be switched between two modes by pressing

the ANALOG Mode button. Each time the ANALOG mode button is pressed, the mode changes as follows:

When the analog controller is in analog mode, the indicator light is red


11/12



[email protected].

Before using the analog controller(WIRELESS USB DUAL SHOCK

GAMEPAD), rotate the stick only

with your thumbs as if drawing a

circle, as shown in the diagram at

the left. Do not twist the stick

CAUTION

1. Do not drop the controller2. Do not disassemble the controller3. Do not pull the connected wire4. Do not expose to direct sunlight5. Do not put liquid or other little things into the controller6. Do not clean the controller with alcohol or other corrosive liquid

WARRANTY

Note: Warranty is VOID if seal is tampered/broken/missing


12/12



d ki li t h02@ h

FAQ(s)

1. WHY IS IT CALLED DUAL SHOCK 2?- Just like its predecessor, the Dual Shock controller for the PS, the Dual Shock 2 controller features

vibration function and analog controls for the Sony PlayStation 2 Console. But then, the Dual Shock 2

looks the same as the Dual Shock controller. They both have 2 Analog Sticks, X, Triangle, Square,

Circle, L and R buttons and a D-Pad all in the same location. The only difference is the Analog Buttons.

2. WHAT DOES ANALOG BUTTON MEAN?- This is a cool feature of the Dual Shock 2 Controller. Just like the Analog Sticks, the Analog Buttons (X,

Triangle, Square, etc.) will give you much precision while playing. A perfect example would be racing

games, where how hard you press the button determines how the gas pedal is forced down. Unlike in

the PS, the buttons will only function 2 ways. Either activated or not. The PS2 will let you take

absolute control of the game. Although this is only a supported feature, some games may not utilize

it.

3. WHAT DOES ANALOG CONTROL MEAN?- Analog controls will give you much stability and precision in your games. Example, your character in a

game will walk if you slightly push the analog stick and runs when you push the stick all the way. Most

likely, the Analog functions work in harmony with the Directional Pad. Lets say you move using the D-

Pad and change the camera view using the Analog Stick.

Wireless USB Dual Shock Gamepad

Documents

Transcript of Wireless USB Dual Shock Gamepad