WHY SPIROL INSERTS?€¦ · WHY SPIROL INSERTS? LOCAL DESIGN, GLOBAL SUPPLY SPIROL has Application...
Transcript of WHY SPIROL INSERTS?€¦ · WHY SPIROL INSERTS? LOCAL DESIGN, GLOBAL SUPPLY SPIROL has Application...
TECHNICAL SUPPORT
Since SPIROL’s inception in 1948, we have lead the industry in application engineering support for fastening, joining and assembly. Our Inserts are designed to maximize and balance tensile (pull-out) and rotational torque performance. Our Application Engineers have the technical know-how and experience to work together with our customers to develop a cost-effective solution to meet the application requirements.
BROAD PRODUCTRANGE/CAPABILITY
Our leading edge product ion technology is suitable to meet all your specific needs for both long and short run requirements at competitive pricing. We offer a broad range of standard products and cost-effective methods of producing special features.
QUALITY
Our comprehensive quality concept encompasses not only product quality, but also quality of design and service. Process control, operational discipline and continuous improvement are the foundation of our mission to exceed our customers' expectations. We are IATF 16949, ISO 9001 and ISO 14001 certified.
INSTALLATION SUPPORT
We offer installation technical support and installation equipment. Our standardized, time-tested, modular designs are robust, reliable and easily adjustable – allowing simple customization to meet the specific needs of an application.
WHY SPIROL INSERTS?
LOCAL DESIGN, GLOBAL SUPPLY
SPIROL has Application Engineers throughout the world to assist you in your designs, supported by state-of-the-art manufacturing centers and worldwide stocking facilities to simplify the logistics of delivering your product.
SPIROL INSERTS
SPIROL has a broad range of Inserts for post-mold installation as well as a series of Molded-In Inserts. Installation of Inserts after molding reduces in-place cost by shortening molding time and eliminating secondary cleaning. This method also reduces rejects and mold damage resulting from dislodged Inserts. Molded-In Inserts are placed into the mold cavity prior to plastic injection and offer exceptional torque and pull-out resistance due to unrestricted plastic flow.
HEAT/ULTRASONIC INSERTS are designed for post-moldinstallation in thermoplastics. Heat and ultrasonic installation yield outstanding performance results. Available in long and short variations, long for maximum torque and pull-out resistance; short for less stringent requirements with the benefits of lower cost and reduced installation time.
Series 19 and 29 are designed for straight holes using standard core pins. The same hole diameter applies to all Inserts within these Series. Seating and installation are facilitated with a pilot and a tapered knurl and groove design. The Series 29 is symmetrical to eliminate the need for orientation.
Series 14 are designed for use in tapered holes. The tapered hole facilitates proper seating and maximizes the surface contact between the Insert and hole wall prior to the application of heat or ultrasonic vibration.
Series 20 and 30 are headed versions using the same body style as Series 19 and 29 respectively.
Pages 8 and 9
Pages 8 and 9
Page 10
SELF-TAPPING INSERTS are available in Series 10 which is a ThreadForming Insert for soft, flexible thermoplastics.
Page 11
PRESS-IN INSERTS are ideal for use in softer plastics to provide areusable thread which can meet the tightening torque requirements for a threaded joint. Moderate pull-out and good torque requirements are provided by the helical knurl which also facilitates good plastic flow. Series 50 and 51 Inserts allow for easy and quick installation. The Series 50 is symmetrical with a generous pilot. Series 51 is the headed version which is also suitable for pull-through applications where high pull-out force is a requirement.
Page 12
MOLDED-IN INSERTS are designed for maximum pull-out andtorque performance, and are often the Insert of choice for thermosets and engineered plastics with a high percentage of filler. The minor thread diameter tolerance is controlled to ensure positive positioning and perpendicularity of the Insert on the core pin during the molding process. Series 63 is symmetrical eliminating orientation and Series 65 is the same body style in a blind ended version. These Inserts are made from 2024 aluminum, a light-weight, lead-free grade.
Page 13
SPIROL Application Engineers will review your application needs and work with you to recommend the optimum solution. One way to start the process is to visit our Optimal Application Engineering portal at SPIROL.com.
© 2020 SPIROL International Corporation 04/20
Please refer to www.SPIROL.com for current specifications and standard product offerings.
e-mail:
SPIROL.com
Installation Technology
Coiled Spring Pins
Rolled Tubular Components
Spacers
Parts Feeding Technology
Dowel Bushings /Spring Dowels
Inserts for Plastics
Precision Shims &Thin Metal Stampings
Disc Springs
Solid Pins
Ground Hollow Dowels
Slotted Spring Pins
Precision Washers
Compression Limiters
Innovative fastening solutions.Lower assembly costs. SPIROL International Corporation
30 Rock AvenueDanielson, Connecticut 06239 U.S.A.Tel. +1 860 774 8571Fax. +1 860 774 2048
SPIROL Shim Division321 Remington RoadStow, Ohio 44224 U.S.A.Tel. +1 330 920 3655Fax. +1 330 920 3659
SPIROL Canada3103 St. Etienne BoulevardWindsor, Ontario N8W 5B1 CanadaTel. +1 519 974 3334Fax. +1 519 974 6550
SPIROL MexicoAvenida Avante #250Parque Industrial Avante ApodacaApodaca, N.L. 66607 MexicoTel. +52 81 8385 4390Fax. +52 81 8385 4391
SPIROL BrazilRua Mafalda Barnabé Soliane, 134Comercial Vitória Martini, Distrito IndustrialCEP 13347-610, Indaiatuba, SP, BrazilTel. +55 19 3936 2701Fax. +55 19 3936 7121
SPIROL FranceCité de l’Automobile ZAC Croix Blandin 18 Rue Léna Bernstein 51100 Reims, FranceTel. +33 3 26 36 31 42 Fax. +33 3 26 09 19 76
SPIROL United Kingdom17 Princewood RoadCorby, NorthantsNN17 4ET United KingdomTel. +44 1536 444800Fax. +44 1536 203415
SPIROL GermanyOttostr. 480333 Munich, GermanyTel. +49 89 4 111 905 71Fax. +49 89 4 111 905 72
SPIROL Spain08940 Cornellà de LlobregatBarcelona, SpainTel. +34 93 669 31 78Fax. +34 93 193 25 43
SPIROL Czech Republic Sokola Tůmy 743/16Ostrava-Mariánské Hory 70900 Czech RepublicTel/Fax. +420 417 537 979
SPIROL Polandul. Solec 38 lok. 10 00-394, Warszawa, PolandTel. +48 510 039 345
SPIROL Asia Headquarters1st Floor, Building 22, Plot D9, District D No. 122 HeDan Road Wai Gao Qiao Free Trade Zone Shanghai, China 200131Tel. +86 21 5046 1451Fax. +86 21 5046 1540
SPIROL Korea160-5 Seokchon-DongSongpa-gu, Seoul, 138-844, KoreaTel. +86 (0) 21 5046-1451Fax. +86 (0) 21 5046-1540
Europe
Americas
AsiaPacific
Technical Centers