What you need Installing your...
1
(b) Installation CD (a) Creative USB Sound Blaster Audigy 2 NX (c) Remote Control ( available with selected models only ) (e) Universal power adapter (d) USB cable (f ) Power adapter plug ( may differ from the one shown here ) What you need CMSS MUTE VOLUME PREVIOUS OPTIONS DISPLAY CANAEL RETURN START NEXT SLOW STEP 1 2 3 4 5 6 7 8 9 0 REC 1 Installing your hardware (a) Notebook computer (b) USB port (d) USB port Connect this last! (e) 5 V DC in (c) Desktop computer (f) Power Outlet ON 1. Turn on your computer or notebook computer. 2. Connect the USB cable, universal power adapter and power adapter plug as shown above. 3. Place your Audigy 2 NX on a flat surface. 4. Plug the power adapter into a power outlet and turn on the outlet, if needed. 5. Press the Power button on your Audigy 2 NX. Windows automatically detects the device and searches for device drivers. 6. When prompted for the audio drivers, click the Cancel button. IMPORTANT: In Windows 98 SE/Me, if Windows detects the new hardware and prompts you to install the USB device drivers, click the Cancel button. USB port(s) can be found on the front, side or back panel of your computer. Creative USB Sound Blaster Audigy 2 NX should only be powered by the supplied universal power adapter. Connect the power adapter last, before turning on your USB audio device. PN 03SB030000001 ® Copyright © 2003 Creative Technology Ltd. Blaster, Sound Blaster, Sound Blaster Audigy, Audigy and the Sound Blaster Audigy logo are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. Manufactured under license from Dolby Laboratories. ‘Dolby’, ‘Pro Logic’and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 1992-1997 by Dolby Laboratories, Inc. All rights reserved. All other products are trademarks or registered trademarks of their respective owners. 2 Installing Drivers and Applications For Windows 98 SE systems, the Windows 98 SE Operating System Installation CD may be required during installation. If you did not receive a Windows 98 SE installation CD with your computer but received a Recovery Disk, the necessary Windows files may already be located at c:\windows\options\ cabs (replace c:\ with the letter of your hard disk drive). After Windows has automatically detected the USB audio device, and you have clicked the Cancel button, do the following: 1. Insert the Audigy 2 NX Installation and Applications CD into your CD-ROM drive. If Windows AutoPlay mode is enabled for your CD-ROM drive, the CD starts running automatically. If not, you need to enable your CD-ROM drive's auto-insert notification feature. Alternatively, from your Windows desktop, click Start -> Run and type d:\ctrun\start.exe (replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive) 2. Follow the instructions on the screen to complete the installation. 3. When prompted, restart your computer. 3 Enabling Direct Memory Access and digital CD playback Digital CD playback may not be available on external DVD/CD- ROM drives with PCMCIA IDE controllers. CD volume is controlled by the Wave slider in the Audio Mixer application. 1. To optimise audio playback performance, Direct Memory Access (DMA) must be enabled for your storage devices. 2. Audigy 2 NX does not support analog CD audio playback. To listen to audio CDs, digital CD playback must be enabled. 3. Please refer to the troubleshooting section of the Audigy 2 NX User's Guide. Go to Start -> Programs -> Creative -> USB Sound Blaster Audigy 2 NX -> Documentation -> Online Manual. Optional Connections Orange Black Green (a) Electric Guitar (c) Microphone (b) Pre-amp FX box (d) Headphones (e) MiniDisc player (f) Analog input amplifier or AV receiver (g) DAT / MiniDisc recorder (h) Optical cables Grey PL Grey Orange Black Green EN FR DE IT ES NL PT SV NO DA FI CZ PL RU
-
Upload
truongtruc -
Category
Documents
-
view
219 -
download
0
Transcript of What you need Installing your...
(b) Installation CD(a) Creative USB Sound Blaster Audigy 2 NX (c) Remote Control ( available with selected models only )
(e) Universal power adapter(d) USB cable (f ) Power adapter plug ( may differ from the one shown here )
What you need
CMSS
MUTE VOLUME
PREVIOUS
OPTIONS DISPLAY
CANAELRETURN START
NEXT
SLOW STEP
1 2 3
4 5 6
7 8 9
0
ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
REC
SELECTOK
1 Installing your hardware
(a) Notebook computer
(b) USB port
(d) USB port
Connect this last!
(e) 5 V DC in
(c) Desktop computer (f) Power Outlet
230
ONON
1. Turn on your computer or notebook computer.2. Connect the USB cable, universal power adapter and power adapter plug as shown above. 3. Place your Audigy 2 NX on a flat surface.4. Plug the power adapter into a power outlet and turn on the outlet, if needed.5. Press the Power button on your Audigy 2 NX. Windows automatically detects the device and searches for device drivers.6. When prompted for the audio drivers, click the Cancel button.
IMPORTANT:In Windows 98 SE/Me, if Windows detects the new hardware and prompts you to install the USB device drivers, click the Cancel button.
USB port(s) can be found on the front, side or back panel of your computer.
Creative USB Sound Blaster Audigy 2 NX should only be powered by the supplied universal power adapter. Connect the power adapter last, before turning on your USB audio device.
PN 03SB030000001
®
Copyright © 2003 Creative Technology Ltd. Blaster, Sound Blaster, Sound Blaster Audigy, Audigy and the Sound Blaster Audigy logo are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. Manufactured under license from Dolby Laboratories. ‘Dolby’, ‘Pro Logic’and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 1992-1997 by Dolby Laboratories, Inc. All rights reserved. All other products are trademarks or registered trademarks of their respective owners.
2 Installing Drivers and Applications
For Windows 98 SE systems, the Windows 98 SE Operating System Installation CD may be required during installation. If you did not receive a Windows 98 SE installation CD with your computer but received a Recovery Disk, the necessary Windows files may already be located at c:\windows\options\ cabs (replace c:\ with the letter of your hard disk drive).
After Windows has automatically detected the USB audio device,
and you have clicked the Cancel button, do the following:
1. Insert the Audigy 2 NX Installation and Applications CD into your
CD-ROM drive.
If Windows AutoPlay mode is enabled for your CD-ROM drive,
the CD starts running automatically. If not, you need to enable
your CD-ROM drive's auto-insert notification feature.
Alternatively, from your Windows desktop, click Start -> Run and
type d:\ctrun\start.exe (replace d:\ with the drive letter of your
CD-ROM/DVD-ROM drive)
2. Follow the instructions on the screen to complete the
installation.
3. When prompted, restart your computer.
3 Enabling Direct Memory Access and digital CD playback
Digital CD playback
may not be available
on external DVD/CD-
ROM drives with
PCMCIA IDE
controllers.
CD volume is
controlled by the
Wave slider in the
Audio Mixer
application.
1. To optimise audio playback performance, Direct Memory Access
(DMA) must be enabled for your storage devices.
2. Audigy 2 NX does not support analog CD audio playback. To
listen to audio CDs, digital CD playback must be enabled.
3. Please refer to the troubleshooting section of the Audigy 2 NX
User's Guide. Go to Start -> Programs -> Creative ->
USB Sound Blaster Audigy 2 NX -> Documentation ->
Online Manual.
Optional Connections
Orange Black Green
(a) Electric Guitar
(c) Microphone
(b) Pre-amp FX box
(d) Headphones
(e) MiniDisc player
(f) Analog input amplifier or AV receiver
(g) DAT / MiniDisc recorder
(h) Optical cables
Grey
PL
Grey OrangeBlackGreen
EN FR DE IT ES NL PT
SV NO DA FI CZ PL RU
